| Buildroot board support for Telit EVK-PRO3 with Telit GE863-PRO3 |
| |
| Official site: |
| http://www.telit.com/en/products.php?p_id=3&p_ac=show&p=10 |
| |
| Build images: |
| make telit_evk_pro3_defconfig |
| make |
| |
| images built: |
| - output/images/barebox.bin |
| - output/images/zImage |
| - output/images/rootfs.ubi |
| |
| |
| Flash built images: |
| The first time you need to bootstrap from Telit Official Release 221.07.1007, |
| at the U-Boot prompt type: |
| U-Boot> loadb |
| send buildroot/output/images/barebox.bin |
| U-Boot> go 0x20200000 |
| |
| flash updated images using barebox through tftp: |
| barebox:/ erase dev/self0; cp /mnt/tftp/barebox.bin /dev/self0 |
| barebox:/ erase /dev/nand0.kernel.bb; cp /mnt/tftp/zImage /dev/nand0.kernel.bb |
| barebox:/ erase /dev/nand0.rootfs.bb; cp /mnt/tftp/rootfs.ubi /dev/nand0.rootfs.bb |
| barebox:/ erase dev/env0 |
| barebox:/ reset |
