| This is the Buildroot board support for the Xilinx ZC706. The ZC706 is |
| a development board based on the Xilinx Zynq-7000 based |
| All-Programmable System-On-Chip. |
| |
| ZC706 information including schematics, reference designs, and manuals |
| are available from |
| http://www.xilinx.com/products/boards-and-kits/ek-z7-zc706-g.html. |
| |
| uboot.bin -- U-Boot SPL w/ Xilinx boot.bin wrapper |
| --------------------------------------------------- |
| |
| Due to licensing issues, the files ps7_init.c/h are not distributed |
| with the U-Boot source code. These files are required to make a |
| boot.bin file. |
| |
| If you already have the Xilinx tools installed, the following sequence |
| will unpack, patch and build the rfs, kernel, uboot, and uboot-spl. |
| |
| make xilinx_zc706_defconfig |
| make uboot-patch |
| cp ${XILINX_SDK_LIB}/hwplatform_templates/ZC706_hw_platform/ps7_init.{c,h} \ |
| output/build/uboot-xilinx-v2014.1/board/xilinx/zynq/ |
| |
| Where ${XILINX_SDK_LIB} is ${XILINX}/SDK/${VERSION}/data/embeddedsw/lib. |
| |
| After copying these files into the U-Boot source tree, you can |
| continue the build with: |
| |
| make |
| |
| *Notice* |
| While the build will successfully complete without the ps7_init.* |
| files, the uboot.bin file generated by this configuration will not |
| function properly on the ZC706. Therefore, it is imperative that the |
| ps7_init.* files be copied into the U-Boot source tree any time the |
| clean, or uboot-dirclean targets are executed. |
| |
| Resulting system |
| ---------------- |
| |
| A FAT32 partition should be created at the beggining of the SD Card |
| and the following files should be installed: |
| |
| - boot.bin |
| - devicetree.dtb |
| - uImage |
| - uramdisk.image.gz |
| - u-boot.img |
| |
| All needed files can be taken from <output>/images/ |
| |
| cp <output>/images/boot.bin /media/sdcard/ |
| cp <output>/images/uImage /media/sdcard/ |
| cp <output>/images/u-boot.img /media/sdcard/ |
| cp <output>/images/zynq-zc706.dtb /media/sdcard/devicetree.dtb |
| cp <output>/images/rootfs.cpio.uboot /media/sdcard/uramdisk.image.gz |