| # Architecture |
| BR2_arm=y |
| BR2_cortex_a7=y |
| BR2_ARM_EABIHF=y |
| |
| # Lock to 3.4 headers as the sunxi kernel is based off the 3.4 branch |
| BR2_KERNEL_HEADERS_VERSION=y |
| BR2_DEFAULT_KERNEL_VERSION="3.4.108" |
| BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_4=y |
| |
| # System configuration |
| BR2_TARGET_GENERIC_HOSTNAME="a20-olinuxino" |
| BR2_TARGET_GENERIC_ISSUE="Welcome to OLinuXino!" |
| BR2_TARGET_GENERIC_GETTY=y |
| BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" |
| BR2_ROOTFS_POST_BUILD_SCRIPT="board/olimex/a20_olinuxino/post-build.sh" |
| BR2_ROOTFS_POST_SCRIPT_ARGS="board/olimex/a20_olinuxino/boot-mali.cmd $(TARGET_DIR)/boot" |
| |
| # Kernel |
| BR2_LINUX_KERNEL=y |
| BR2_LINUX_KERNEL_CUSTOM_TARBALL=y |
| BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,linux-sunxi,linux-sunxi,sunxi-v3.4.103-r1)/sunxi-v3.4.103-r1.tar.gz" |
| BR2_LINUX_KERNEL_USE_DEFCONFIG=y |
| BR2_LINUX_KERNEL_DEFCONFIG="sun7i" |
| BR2_LINUX_KERNEL_ZIMAGE=y |
| BR2_LINUX_KERNEL_INSTALL_TARGET=y |
| |
| # sunxi packages |
| BR2_PACKAGE_SUNXI_TOOLS=y |
| BR2_PACKAGE_SUNXI_BOARDS=y |
| BR2_PACKAGE_SUNXI_BOARDS_FEX_FILE="a20/a20-olinuxino_lime.fex" |
| BR2_PACKAGE_SUNXI_MALI=y |
| BR2_PACKAGE_SUNXI_MALI_DBG=y |
| |
| # Filesystem |
| BR2_TARGET_ROOTFS_EXT2=y |
| BR2_TARGET_ROOTFS_EXT2_4=y |
| # BR2_TARGET_ROOTFS_TAR is not set |
| |
| # Bootloaders |
| BR2_TARGET_UBOOT=y |
| BR2_TARGET_UBOOT_BOARDNAME="A20-OLinuXino-Lime" |
| BR2_TARGET_UBOOT_CUSTOM_VERSION=y |
| BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2015.01" |
| BR2_TARGET_UBOOT_FORMAT_BIN=y |
| BR2_TARGET_UBOOT_SPL=y |
| BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin" |
| |
| # Additional tools |
| BR2_PACKAGE_HOST_UBOOT_TOOLS=y |
