| # mips default CPU ISAs |
| config BR2_MIPS_CPU_MIPS32 |
| bool |
| config BR2_MIPS_CPU_MIPS32R2 |
| bool |
| config BR2_MIPS_CPU_MIPS32R5 |
| bool |
| config BR2_MIPS_CPU_MIPS32R6 |
| bool |
| config BR2_MIPS_CPU_MIPS64 |
| bool |
| config BR2_MIPS_CPU_MIPS64R2 |
| bool |
| config BR2_MIPS_CPU_MIPS64R5 |
| bool |
| config BR2_MIPS_CPU_MIPS64R6 |
| bool |
| |
| choice |
| prompt "Target Architecture Variant" |
| depends on BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el |
| default BR2_mips_32 if BR2_mips || BR2_mipsel |
| default BR2_mips_64 if BR2_mips64 || BR2_mips64el |
| help |
| Specific CPU variant to use |
| |
| 64bit cabable: 64, 64r2, 64r5, 64r6 |
| non-64bit capable: 32, 32r2, 32r5, 32r6 |
| |
| config BR2_mips_32 |
| bool "Generic MIPS32" |
| depends on !BR2_ARCH_IS_64 |
| select BR2_MIPS_CPU_MIPS32 |
| config BR2_mips_32r2 |
| bool "Generic MIPS32R2" |
| depends on !BR2_ARCH_IS_64 |
| select BR2_MIPS_CPU_MIPS32R2 |
| config BR2_mips_32r5 |
| bool "Generic MIPS32R5" |
| depends on !BR2_ARCH_IS_64 |
| select BR2_MIPS_CPU_MIPS32R5 |
| config BR2_mips_32r6 |
| bool "Generic MIPS32R6" |
| depends on !BR2_ARCH_IS_64 |
| select BR2_MIPS_CPU_MIPS32R6 |
| config BR2_mips_interaptiv |
| bool "interAptiv" |
| depends on !BR2_ARCH_IS_64 |
| select BR2_MIPS_CPU_MIPS32R2 |
| config BR2_mips_m5150 |
| bool "M5150" |
| depends on !BR2_ARCH_IS_64 |
| select BR2_MIPS_CPU_MIPS32R5 |
| config BR2_mips_m6250 |
| bool "M6250" |
| depends on !BR2_ARCH_IS_64 |
| select BR2_MIPS_CPU_MIPS32R6 |
| config BR2_mips_p5600 |
| bool "P5600" |
| depends on !BR2_ARCH_IS_64 |
| select BR2_MIPS_CPU_MIPS32R5 |
| config BR2_mips_xburst |
| bool "XBurst" |
| depends on !BR2_ARCH_IS_64 |
| select BR2_MIPS_CPU_MIPS32R2 |
| help |
| The Ingenic XBurst is a MIPS32R2 microprocessor. It has a |
| bug in the FPU that can generate incorrect results in |
| certain cases. The problem shows up when you have several |
| fused madd instructions in sequence with dependant |
| operands. This requires the -mno-fused-madd compiler option |
| to be used in order to prevent emitting these instructions. |
| |
| See http://www.ingenic.com/en/?xburst.html |
| config BR2_mips_64 |
| bool "Generic MIPS64" |
| depends on BR2_ARCH_IS_64 |
| select BR2_MIPS_CPU_MIPS64 |
| config BR2_mips_64r2 |
| bool "Generic MIPS64R2" |
| depends on BR2_ARCH_IS_64 |
| select BR2_MIPS_CPU_MIPS64R2 |
| config BR2_mips_64r5 |
| bool "Generic MIPS64R5" |
| depends on BR2_ARCH_IS_64 |
| select BR2_MIPS_CPU_MIPS64R5 |
| config BR2_mips_64r6 |
| bool "Generic MIPS64R6" |
| depends on BR2_ARCH_IS_64 |
| select BR2_MIPS_CPU_MIPS64R6 |
| config BR2_mips_i6400 |
| bool "I6400" |
| depends on BR2_ARCH_IS_64 |
| select BR2_MIPS_CPU_MIPS64R6 |
| config BR2_mips_p6600 |
| bool "P6600" |
| depends on BR2_ARCH_IS_64 |
| select BR2_MIPS_CPU_MIPS64R6 |
| endchoice |
| |
| |
| choice |
| prompt "Target ABI" |
| depends on BR2_mips64 || BR2_mips64el |
| default BR2_MIPS_NABI32 |
| |
| help |
| Application Binary Interface to use |
| |
| config BR2_MIPS_NABI32 |
| bool "n32" |
| depends on BR2_ARCH_IS_64 |
| select BR2_KERNEL_64_USERLAND_32 |
| config BR2_MIPS_NABI64 |
| bool "n64" |
| depends on BR2_ARCH_IS_64 |
| endchoice |
| |
| config BR2_MIPS_SOFT_FLOAT |
| bool "Use soft-float" |
| default y |
| select BR2_SOFT_FLOAT |
| help |
| If your target CPU does not have a Floating Point Unit (FPU) |
| or a kernel FPU emulator, but you still wish to support |
| floating point functions, then everything will need to be |
| compiled with soft floating point support (-msoft-float). |
| |
| config BR2_ARCH |
| default "mips" if BR2_mips |
| default "mipsel" if BR2_mipsel |
| default "mips64" if BR2_mips64 |
| default "mips64el" if BR2_mips64el |
| |
| config BR2_ENDIAN |
| default "LITTLE" if BR2_mipsel || BR2_mips64el |
| default "BIG" if BR2_mips || BR2_mips64 |
| |
| config BR2_GCC_TARGET_ARCH |
| default "mips32" if BR2_mips_32 |
| default "mips32r2" if BR2_mips_32r2 |
| default "mips32r5" if BR2_mips_32r5 |
| default "mips32r6" if BR2_mips_32r6 |
| default "interaptiv" if BR2_mips_interaptiv |
| default "m5101" if BR2_mips_m5150 |
| default "m6201" if BR2_mips_m6250 |
| default "p5600" if BR2_mips_p5600 |
| default "mips32r2" if BR2_mips_xburst |
| default "mips64" if BR2_mips_64 |
| default "mips64r2" if BR2_mips_64r2 |
| default "mips64r5" if BR2_mips_64r5 |
| default "mips64r6" if BR2_mips_64r6 |
| default "i6400" if BR2_mips_i6400 |
| default "p6600" if BR2_mips_p6600 |
| |
| config BR2_MIPS_OABI32 |
| bool |
| default y if BR2_mips || BR2_mipsel |
| |
| config BR2_GCC_TARGET_ABI |
| default "32" if BR2_MIPS_OABI32 |
| default "n32" if BR2_MIPS_NABI32 |
| default "64" if BR2_MIPS_NABI64 |
