| Buildroot for Boundary Devices Nitrogen6X: |
| |
| http://boundarydevices.com/products/nitrogen6x-board-imx6-arm-cortex-a9-sbc/ |
| |
| Notice: U-Boot as shipped on the board has a bug reading rev 0 ext2 |
| file systems (which is what genext2fs generates). To convert it to rev |
| 1, do: |
| |
| tune2fs -O filetype output/images/rootfs.ext2 |
| e2fsck -a output/images/rootfs.ext2 |
| |
| To install, simply extract rootfs.ext2 to first partition of a uSD card: |
| |
| sudo dd if=output/images/rootfs.ext2 of=/dev/sdX1 |
| |
| Where 'sdX1' is the device node of the uSD partition. |
