| |
| # |
| # This file implements the support for external toolchains, i.e |
| # toolchains that have not been produced by Buildroot itself and that |
| # Buildroot can download from the Web or that are already available on |
| # the system on which Buildroot runs. So far, we have tested this |
| # with: |
| # |
| # * Toolchains generated by Crosstool-NG |
| # * Toolchains generated by Buildroot |
| # * ARM, MIPS and PowerPC toolchains made available by |
| # Codesourcery. For the MIPS toolchain, the -muclibc variant isn't |
| # supported yet, only the default glibc-based variant is. |
| # |
| # The basic principle is the following |
| # |
| # 1. If the toolchain is not pre-installed, download and extract it |
| # in $(TOOLCHAIN_EXTERNAL_DIR). |
| # |
| # 2. For all external toolchains, perform some checks on the |
| # conformity between the toolchain configuration described in the |
| # Buildroot menuconfig system, and the real configuration of the |
| # external toolchain. This is for example important to make sure that |
| # the Buildroot configuration system knows whether the toolchain |
| # supports RPC, IPv6, locales, large files, etc. Unfortunately, these |
| # things cannot be detected automatically, since the value of these |
| # options (such as BR2_TOOLCHAIN_HAS_NATIVE_RPC) are needed at |
| # configuration time because these options are used as dependencies |
| # for other options. And at configuration time, we are not able to |
| # retrieve the external toolchain configuration. |
| # |
| # 3. Copy the libraries needed at runtime to the target directory, |
| # $(TARGET_DIR). Obviously, things such as the C library, the dynamic |
| # loader and a few other utility libraries are needed if dynamic |
| # applications are to be executed on the target system. |
| # |
| # 4. Copy the libraries and headers to the staging directory. This |
| # will allow all further calls to gcc to be made using --sysroot |
| # $(STAGING_DIR), which greatly simplifies the compilation of the |
| # packages when using external toolchains. So in the end, only the |
| # cross-compiler binaries remains external, all libraries and headers |
| # are imported into the Buildroot tree. |
| # |
| # 5. Build a toolchain wrapper which executes the external toolchain |
| # with a number of arguments (sysroot/march/mtune/..) hardcoded, |
| # so we're sure the correct configuration is always used and the |
| # toolchain behaves similar to an internal toolchain. |
| # This toolchain wrapper and symlinks are installed into |
| # $(HOST_DIR)/usr/bin like for the internal toolchains, and the rest |
| # of Buildroot is handled identical for the 2 toolchain types. |
| |
| LIB_EXTERNAL_LIBS=ld*.so libc.so libcrypt.so libdl.so libgcc_s.so libm.so libnsl.so libresolv.so librt.so libutil.so |
| LIB_EXTERNAL_LIBS+=$(call qstrip,$(BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS)) |
| ifeq ($(BR2_TOOLCHAIN_EXTERNAL_GLIBC),y) |
| LIB_EXTERNAL_LIBS+=libnss_files.so libnss_dns.so |
| endif |
| |
| ifeq ($(BR2_INSTALL_LIBSTDCPP),y) |
| USR_LIB_EXTERNAL_LIBS+=libstdc++.so |
| endif |
| |
| ifeq ($(BR2_TOOLCHAIN_HAS_THREADS),y) |
| LIB_EXTERNAL_LIBS+=libpthread.so |
| ifneq ($(BR2_PACKAGE_GDB_SERVER)$(BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY),) |
| LIB_EXTERNAL_LIBS+=libthread_db.so |
| endif # gdbserver |
| endif # ! no threads |
| |
| # Details about sysroot directory selection. |
| # |
| # To find the sysroot directory: |
| # |
| # * We first try the -print-sysroot option, available in gcc 4.4.x |
| # and in some Codesourcery toolchains. |
| # |
| # * If this option is not available, we fallback to the value of |
| # --with-sysroot as visible in CROSS-gcc -v. |
| # |
| # When doing those tests, we don't pass any option to gcc that could |
| # select a multilib variant (such as -march) as we want the "main" |
| # sysroot, which contains all variants of the C library in the case of |
| # multilib toolchains. We use the TARGET_CC_NO_SYSROOT variable, which |
| # is the path of the cross-compiler, without the |
| # --sysroot=$(STAGING_DIR), since what we want to find is the location |
| # of the original toolchain sysroot. This "main" sysroot directory is |
| # stored in SYSROOT_DIR. |
| # |
| # Then, multilib toolchains are a little bit more complicated, since |
| # they in fact have multiple sysroots, one for each variant supported |
| # by the toolchain. So we need to find the particular sysroot we're |
| # interested in. |
| # |
| # To do so, we ask the compiler where its sysroot is by passing all |
| # flags (including -march and al.), except the --sysroot flag since we |
| # want to the compiler to tell us where its original sysroot |
| # is. ARCH_SUBDIR will contain the subdirectory, in the main |
| # SYSROOT_DIR, that corresponds to the selected architecture |
| # variant. ARCH_SYSROOT_DIR will contain the full path to this |
| # location. |
| # |
| # One might wonder why we don't just bother with ARCH_SYSROOT_DIR. The |
| # fact is that in multilib toolchains, the header files are often only |
| # present in the main sysroot, and only the libraries are available in |
| # each variant-specific sysroot directory. |
| |
| |
| TOOLCHAIN_EXTERNAL_PREFIX=$(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_PREFIX)) |
| ifeq ($(BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD),y) |
| TOOLCHAIN_EXTERNAL_DIR=$(HOST_DIR)/opt/ext-toolchain |
| else |
| TOOLCHAIN_EXTERNAL_DIR=$(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_PATH)) |
| endif |
| |
| ifeq ($(TOOLCHAIN_EXTERNAL_DIR),) |
| # if no path set, figure it out from path |
| TOOLCHAIN_EXTERNAL_BIN:=$(shell dirname $(shell which $(TOOLCHAIN_EXTERNAL_PREFIX)-gcc)) |
| else |
| TOOLCHAIN_EXTERNAL_BIN:=$(TOOLCHAIN_EXTERNAL_DIR)/bin |
| endif |
| |
| TOOLCHAIN_EXTERNAL_CROSS=$(TOOLCHAIN_EXTERNAL_BIN)/$(TOOLCHAIN_EXTERNAL_PREFIX)- |
| TOOLCHAIN_EXTERNAL_CC=$(TOOLCHAIN_EXTERNAL_CROSS)gcc |
| TOOLCHAIN_EXTERNAL_CXX=$(TOOLCHAIN_EXTERNAL_CROSS)g++ |
| TOOLCHAIN_EXTERNAL_WRAPPER_ARGS = -DBR_SYSROOT='"$(STAGING_SUBDIR)"' |
| |
| ifeq ($(filter $(HOST_DIR)/%,$(TOOLCHAIN_EXTERNAL_BIN)),) |
| # TOOLCHAIN_EXTERNAL_BIN points outside HOST_DIR => absolute path |
| TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += \ |
| -DBR_CROSS_PATH_ABS='"$(TOOLCHAIN_EXTERNAL_BIN)"' |
| else |
| # TOOLCHAIN_EXTERNAL_BIN points inside HOST_DIR => relative path |
| TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += \ |
| -DBR_CROSS_PATH_REL='"$(TOOLCHAIN_EXTERNAL_BIN:$(HOST_DIR)/%=%)"' |
| endif |
| |
| CC_TARGET_TUNE_:=$(call qstrip,$(BR2_GCC_TARGET_TUNE)) |
| CC_TARGET_CPU_:=$(call qstrip,$(BR2_GCC_TARGET_CPU)) |
| CC_TARGET_ARCH_:=$(call qstrip,$(BR2_GCC_TARGET_ARCH)) |
| CC_TARGET_ABI_:=$(call qstrip,$(BR2_GCC_TARGET_ABI)) |
| |
| # march/mtune/floating point mode needs to be passed to the external toolchain |
| # to select the right multilib variant |
| ifeq ($(BR2_x86_64),y) |
| TOOLCHAIN_EXTERNAL_CFLAGS += -m64 |
| TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_64 |
| endif |
| ifneq ($(CC_TARGET_TUNE_),) |
| TOOLCHAIN_EXTERNAL_CFLAGS += -mtune=$(CC_TARGET_TUNE_) |
| TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_TUNE='"$(CC_TARGET_TUNE_)"' |
| endif |
| ifneq ($(CC_TARGET_ARCH_),) |
| TOOLCHAIN_EXTERNAL_CFLAGS += -march=$(CC_TARGET_ARCH_) |
| TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_ARCH='"$(CC_TARGET_ARCH_)"' |
| endif |
| ifneq ($(CC_TARGET_CPU_),) |
| TOOLCHAIN_EXTERNAL_CFLAGS += -mcpu=$(CC_TARGET_CPU_) |
| TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_CPU='"$(CC_TARGET_CPU_)"' |
| endif |
| ifneq ($(CC_TARGET_ABI_),) |
| TOOLCHAIN_EXTERNAL_CFLAGS += -mabi=$(CC_TARGET_ABI_) |
| TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_ABI='"$(CC_TARGET_ABI_)"' |
| endif |
| |
| ifneq ($(BR2_TARGET_OPTIMIZATION),) |
| TOOLCHAIN_EXTERNAL_CFLAGS += $(call qstrip,$(BR2_TARGET_OPTIMIZATION)) |
| # We create a list like '"-mfoo", "-mbar", "-mbarfoo"' so that each |
| # flag is a separate argument when used in execv() by the external |
| # toolchain wrapper. |
| TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_ADDITIONAL_CFLAGS='$(foreach f,$(call qstrip,$(BR2_TARGET_OPTIMIZATION)),"$(f)",)' |
| endif |
| |
| ifeq ($(BR2_SOFT_FLOAT),y) |
| TOOLCHAIN_EXTERNAL_CFLAGS += -msoft-float |
| TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_SOFTFLOAT=1 |
| endif |
| |
| ifeq ($(BR2_VFP_FLOAT),y) |
| TOOLCHAIN_EXTERNAL_CFLAGS += -mfpu=vfp |
| TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_VFPFLOAT=1 |
| endif |
| |
| ifeq ($(BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD),y) |
| TOOLCHAIN_EXTERNAL_DEPENDENCIES = $(TOOLCHAIN_EXTERNAL_DIR)/.extracted |
| endif |
| |
| ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201103),y) |
| TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/public/gnu_toolchain/arm-none-linux-gnueabi/ |
| TOOLCHAIN_EXTERNAL_SOURCE=arm-2011.03-41-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201109),y) |
| TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/public/gnu_toolchain/arm-none-linux-gnueabi/ |
| TOOLCHAIN_EXTERNAL_SOURCE=arm-2011.09-70-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201203),y) |
| TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/public/gnu_toolchain/arm-none-linux-gnueabi/ |
| TOOLCHAIN_EXTERNAL_SOURCE=arm-2012.03-57-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_11),y) |
| TOOLCHAIN_EXTERNAL_SITE=https://launchpad.net/linaro-toolchain-binaries/trunk/2012.11/+download/ |
| TOOLCHAIN_EXTERNAL_SOURCE=gcc-linaro-arm-linux-gnueabihf-4.7-2012.11-20121123_linux.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_12),y) |
| TOOLCHAIN_EXTERNAL_SITE=http://releases.linaro.org/12.12/components/toolchain/binaries/ |
| TOOLCHAIN_EXTERNAL_SOURCE=gcc-linaro-arm-linux-gnueabihf-4.7-2012.12-20121214_linux.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_2013_01),y) |
| TOOLCHAIN_EXTERNAL_SITE=https://launchpad.net/linaro-toolchain-binaries/trunk/2013.01/+download/ |
| TOOLCHAIN_EXTERNAL_SOURCE=gcc-linaro-arm-linux-gnueabihf-4.7-2013.01-20130125_linux.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201109),y) |
| TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu/ |
| TOOLCHAIN_EXTERNAL_SOURCE=mips-2011.09-75-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201203),y) |
| TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu/ |
| TOOLCHAIN_EXTERNAL_SOURCE=mips-2012.03-63-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201209),y) |
| TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu/ |
| TOOLCHAIN_EXTERNAL_SOURCE=mips-2012.09-99-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009),y) |
| TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/public/gnu_toolchain/powerpc-linux-gnu/ |
| TOOLCHAIN_EXTERNAL_SOURCE=freescale-2010.09-55-powerpc-linux-gnu-i686-pc-linux-gnu.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103),y) |
| TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/public/gnu_toolchain/powerpc-linux-gnu/ |
| TOOLCHAIN_EXTERNAL_SOURCE=freescale-2011.03-38-powerpc-linux-gnu-i686-pc-linux-gnu.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103),y) |
| TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu/ |
| TOOLCHAIN_EXTERNAL_SOURCE=renesas-2011.03-37-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201203),y) |
| TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu/ |
| TOOLCHAIN_EXTERNAL_SOURCE=renesas-2012.03-35-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201209),y) |
| TOOLCHAIN_EXTERNAL_SITE=https://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu/ |
| TOOLCHAIN_EXTERNAL_SOURCE=renesas-2012.09-61-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009),y) |
| TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/public/gnu_toolchain/sh-uclinux/ |
| TOOLCHAIN_EXTERNAL_SOURCE=renesas-2010.09-60-sh-uclinux-i686-pc-linux-gnu.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103),y) |
| TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/public/gnu_toolchain/sh-uclinux/ |
| TOOLCHAIN_EXTERNAL_SOURCE=renesas-2011.03-36-sh-uclinux-i686-pc-linux-gnu.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201109),y) |
| TOOLCHAIN_EXTERNAL_SITE=https://sourcery.mentor.com/public/gnu_toolchain/i686-pc-linux-gnu/ |
| TOOLCHAIN_EXTERNAL_SOURCE=ia32-2011.09-24-i686-pc-linux-gnu-i386-linux.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201203),y) |
| TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/public/gnu_toolchain/i686-pc-linux-gnu/ |
| TOOLCHAIN_EXTERNAL_SOURCE=ia32-2012.03-27-i686-pc-linux-gnu-i386-linux.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201209),y) |
| TOOLCHAIN_EXTERNAL_SITE=https://sourcery.mentor.com/public/gnu_toolchain/i686-pc-linux-gnu/ |
| TOOLCHAIN_EXTERNAL_SOURCE=ia32-2012.09-62-i686-pc-linux-gnu-i386-linux.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2011R1),y) |
| TOOLCHAIN_EXTERNAL_SITE_1 = http://blackfin.uclinux.org/gf/download/frsrelease/531/9509/ |
| TOOLCHAIN_EXTERNAL_SOURCE_1 = blackfin-toolchain-2011R1-RC4.i386.tar.bz2 |
| TOOLCHAIN_EXTERNAL_SITE_2 = http://blackfin.uclinux.org/gf/download/frsrelease/531/9517/ |
| TOOLCHAIN_EXTERNAL_SOURCE_2 = blackfin-toolchain-uclibc-full-2011R1-RC4.i386.tar.bz2 |
| TOOLCHAIN_EXTERNAL_SOURCE = $(TOOLCHAIN_EXTERNAL_SOURCE_1) $(TOOLCHAIN_EXTERNAL_SOURCE_2) |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1),y) |
| TOOLCHAIN_EXTERNAL_SITE_1 = http://blackfin.uclinux.org/gf/download/frsrelease/559/9858/ |
| TOOLCHAIN_EXTERNAL_SOURCE_1 = blackfin-toolchain-2012R1-RC2.i386.tar.bz2 |
| TOOLCHAIN_EXTERNAL_SITE_2 = http://blackfin.uclinux.org/gf/download/frsrelease/559/9866/ |
| TOOLCHAIN_EXTERNAL_SOURCE_2 = blackfin-toolchain-uclibc-full-2012R1-RC2.i386.tar.bz2 |
| TOOLCHAIN_EXTERNAL_SOURCE = $(TOOLCHAIN_EXTERNAL_SOURCE_1) $(TOOLCHAIN_EXTERNAL_SOURCE_2) |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2),y) |
| TOOLCHAIN_EXTERNAL_SITE_1 = http://blackfin.uclinux.org/gf/download/frsrelease/588/10139/ |
| TOOLCHAIN_EXTERNAL_SOURCE_1 = blackfin-toolchain-2012R2-RC2.i386.tar.bz2 |
| TOOLCHAIN_EXTERNAL_SITE_2 = http://blackfin.uclinux.org/gf/download/frsrelease/588/10147/ |
| TOOLCHAIN_EXTERNAL_SOURCE_2 = blackfin-toolchain-uclibc-full-2012R2-RC2.i386.tar.bz2 |
| TOOLCHAIN_EXTERNAL_SOURCE = $(TOOLCHAIN_EXTERNAL_SOURCE_1) $(TOOLCHAIN_EXTERNAL_SOURCE_2) |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_V2),y) |
| TOOLCHAIN_EXTERNAL_SITE=http://git.xilinx.com/?p=xldk/microblaze_v2.0_le.git;a=blob;h=d7b493c5dbcc24ba9cc3be2e4c14d6d9701e6805;hb=00163583b771bb4e937632765dd0c5516b3e31c4;f= |
| TOOLCHAIN_EXTERNAL_SOURCE=microblazeel-unknown-linux-gnu.tgz |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2),y) |
| TOOLCHAIN_EXTERNAL_SITE=http://git.xilinx.com/?p=xldk/microblaze_v2.0.git;a=blob;h=71e031ae990e063a5718f90d30cf97ad85e2f565;hb=569081301f0f1d8d3b24335a364e8ff1774190d4;f= |
| TOOLCHAIN_EXTERNAL_SOURCE=microblaze-unknown-linux-gnu.tgz |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_12_11),y) |
| TOOLCHAIN_EXTERNAL_SITE=http://releases.linaro.org/12.11/components/toolchain/binaries/ |
| TOOLCHAIN_EXTERNAL_SOURCE=gcc-linaro-aarch64-linux-gnu-4.7-2012.11-1-20121127_linux.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_12_12),y) |
| TOOLCHAIN_EXTERNAL_SITE=http://releases.linaro.org/12.12/components/toolchain/binaries/ |
| TOOLCHAIN_EXTERNAL_SOURCE=gcc-linaro-aarch64-linux-gnu-4.7-2012.12-20121214_linux.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_13_01),y) |
| TOOLCHAIN_EXTERNAL_SITE=http://releases.linaro.org/13.01/components/toolchain/binaries/ |
| TOOLCHAIN_EXTERNAL_SOURCE=gcc-linaro-aarch64-linux-gnu-4.7-2013.01-20130125_linux.tar.xz |
| else |
| # Custom toolchain |
| TOOLCHAIN_EXTERNAL_SITE=$(dir $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_URL))) |
| TOOLCHAIN_EXTERNAL_SOURCE=$(notdir $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_URL))) |
| |
| # A value must be set (even if unused), otherwise the |
| # $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE) rule would override the main |
| # $(DL_DIR) rule |
| ifeq (,$(TOOLCHAIN_EXTERNAL_SOURCE)) |
| TOOLCHAIN_EXTERNAL_SOURCE=none |
| endif |
| endif |
| |
| # Special handling for Blackfin toolchain, because of the split in two |
| # tarballs, and the organization of tarball contents. The tarballs |
| # contain ./opt/uClinux/{bfin-uclinux,bfin-linux-uclibc} directories, |
| # which themselves contain the toolchain. This is why we strip more |
| # components than usual. |
| ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2011R1)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2),y) |
| $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE_1): |
| $(call DOWNLOAD,$(TOOLCHAIN_EXTERNAL_SITE_1)/$(TOOLCHAIN_EXTERNAL_SOURCE_1)) |
| |
| $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE_2): |
| $(call DOWNLOAD,$(TOOLCHAIN_EXTERNAL_SITE_2)/$(TOOLCHAIN_EXTERNAL_SOURCE_2)) |
| |
| $(TOOLCHAIN_EXTERNAL_DIR)/.extracted: $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE_1) $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE_2) |
| mkdir -p $(@D) |
| $(INFLATE$(suffix $(TOOLCHAIN_EXTERNAL_SOURCE_1))) $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE_1) | \ |
| $(TAR) $(TAR_STRIP_COMPONENTS)=3 --hard-dereference -C $(@D) $(TAR_OPTIONS) - |
| $(INFLATE$(suffix $(TOOLCHAIN_EXTERNAL_SOURCE_2))) $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE_2) | \ |
| $(TAR) $(TAR_STRIP_COMPONENTS)=3 --hard-dereference -C $(@D) $(TAR_OPTIONS) - |
| ifeq ($(TOOLCHAIN_EXTERNAL_PREFIX),bfin-uclinux) |
| rm -rf $(TOOLCHAIN_EXTERNAL_DIR)/bfin-linux-uclibc |
| mv $(TOOLCHAIN_EXTERNAL_DIR)/bfin-uclinux $(TOOLCHAIN_EXTERNAL_DIR)/tmp |
| mv $(TOOLCHAIN_EXTERNAL_DIR)/tmp/* $(TOOLCHAIN_EXTERNAL_DIR)/ |
| rmdir $(TOOLCHAIN_EXTERNAL_DIR)/tmp |
| else |
| rm -rf $(TOOLCHAIN_EXTERNAL_DIR)/bfin-uclinux |
| mv $(TOOLCHAIN_EXTERNAL_DIR)/bfin-linux-uclibc $(TOOLCHAIN_EXTERNAL_DIR)/tmp |
| mv $(TOOLCHAIN_EXTERNAL_DIR)/tmp/* $(TOOLCHAIN_EXTERNAL_DIR)/ |
| rmdir $(TOOLCHAIN_EXTERNAL_DIR)/tmp |
| endif |
| $(Q)touch $@ |
| else |
| # Download and extraction of a toolchain |
| $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE): |
| $(call DOWNLOAD,$(TOOLCHAIN_EXTERNAL_SITE)$(TOOLCHAIN_EXTERNAL_SOURCE),$(TOOLCHAIN_EXTERNAL_SOURCE)) |
| |
| $(TOOLCHAIN_EXTERNAL_DIR)/.extracted: $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE) |
| mkdir -p $(@D) |
| $(INFLATE$(suffix $(TOOLCHAIN_EXTERNAL_SOURCE))) $^ | \ |
| $(TAR) $(TAR_STRIP_COMPONENTS)=1 --exclude='usr/lib/locale/*' -C $(@D) $(TAR_OPTIONS) - |
| $(Q)touch $@ |
| endif |
| |
| # Checks for an already installed toolchain: check the toolchain |
| # location, check that it supports sysroot, and then verify that it |
| # matches the configuration provided in Buildroot: ABI, C++ support, |
| # type of C library and all C library features. |
| $(STAMP_DIR)/ext-toolchain-checked: $(TOOLCHAIN_EXTERNAL_DEPENDENCIES) |
| @$(call MESSAGE,"Checking external toolchain settings") |
| $(Q)$(call check_cross_compiler_exists,$(TOOLCHAIN_EXTERNAL_CC)) |
| $(Q)LIBC_A_LOCATION=`readlink -f $$(LANG=C $(TOOLCHAIN_EXTERNAL_CC) -print-file-name=libc.a)` ; \ |
| SYSROOT_DIR=`echo $${LIBC_A_LOCATION} | sed -r -e 's:usr/lib(64)?/(.*/)?libc\.a::'` ; \ |
| if test -z "$${SYSROOT_DIR}" ; then \ |
| @echo "External toolchain doesn't support --sysroot. Cannot use." ; \ |
| exit 1 ; \ |
| fi ; \ |
| if test x$(BR2_arm) == x"y" ; then \ |
| $(call check_arm_abi,$(TOOLCHAIN_EXTERNAL_CC)) ; \ |
| fi ; \ |
| if test x$(BR2_INSTALL_LIBSTDCPP) == x"y" ; then \ |
| $(call check_cplusplus,$(TOOLCHAIN_EXTERNAL_CXX)) ; \ |
| fi ; \ |
| if test x$(BR2_TOOLCHAIN_EXTERNAL_UCLIBC) == x"y" ; then \ |
| $(call check_uclibc,$${SYSROOT_DIR}) ; \ |
| else \ |
| $(call check_glibc,$${SYSROOT_DIR}) ; \ |
| fi |
| $(Q)touch $@ |
| |
| # Integration of the toolchain into Buildroot: find the main sysroot |
| # and the variant-specific sysroot, then copy the needed libraries to |
| # the $(TARGET_DIR) and copy the whole sysroot (libraries and headers) |
| # to $(STAGING_DIR). |
| # |
| # Variables are defined as follows: |
| # |
| # LIBC_A_LOCATION: location of the libc.a file in the default |
| # multilib variant (allows to find the main |
| # sysroot directory) |
| # Ex: /x-tools/mips-2011.03/mips-linux-gnu/libc/usr/lib/libc.a |
| # |
| # SYSROOT_DIR: the main sysroot directory, deduced from |
| # LIBC_A_LOCATION by removing the |
| # usr/lib[64]/libc.a part of the path. |
| # Ex: /x-tools/mips-2011.03/mips-linux-gnu/libc/ |
| # |
| # ARCH_LIBC_A_LOCATION: location of the libc.a file in the selected |
| # multilib variant (taking into account the |
| # CFLAGS). Allows to find the sysroot of the |
| # selected multilib variant. |
| # Ex: /x-tools/mips-2011.03/mips-linux-gnu/libc/mips16/soft-float/el/usr/lib/libc.a |
| # |
| # ARCH_SYSROOT_DIR: the sysroot of the selected multilib variant, |
| # deduced from ARCH_LIBC_A_LOCATION by removing |
| # usr/lib[64]/libc.a at the end of the path. |
| # Ex: /x-tools/mips-2011.03/mips-linux-gnu/libc/mips16/soft-float/el/ |
| # |
| # ARCH_LIB_DIR: 'lib' or 'lib64' depending on where libraries are |
| # stored. Deduced from ARCH_LIBC_A_LOCATION by |
| # looking at usr/lib??/libc.a. |
| # Ex: lib |
| # |
| # ARCH_SUBDIR: the relative location of the sysroot of the selected |
| # multilib variant compared to the main sysroot. |
| # Ex: mips16/soft-float/el |
| # |
| # SUPPORT_LIB_DIR: some toolchains, such as recent Linaro toolchains, |
| # store GCC support libraries (libstdc++, |
| # libgcc_s, etc.) outside of the sysroot. In |
| # this case, SUPPORT_LIB_DIR is set to a |
| # non-empty value, and points to the directory |
| # where these support libraries are |
| # available. Those libraries will be copied to |
| # our sysroot, and the directory will also be |
| # considered when searching libraries for copy |
| # to the target filesystem. |
| |
| $(STAMP_DIR)/ext-toolchain-installed: $(STAMP_DIR)/ext-toolchain-checked |
| $(Q)LIBC_A_LOCATION=`readlink -f $$(LANG=C $(TOOLCHAIN_EXTERNAL_CC) -print-file-name=libc.a)` ; \ |
| SYSROOT_DIR=`echo $${LIBC_A_LOCATION} | sed -r -e 's:usr/lib(64)?/(.*/)?libc\.a::'` ; \ |
| if test -z "$${SYSROOT_DIR}" ; then \ |
| @echo "External toolchain doesn't support --sysroot. Cannot use." ; \ |
| exit 1 ; \ |
| fi ; \ |
| ARCH_LIBC_A_LOCATION=`readlink -f $$(LANG=C $(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS) -print-file-name=libc.a)` ; \ |
| ARCH_SYSROOT_DIR=`echo $${ARCH_LIBC_A_LOCATION} | sed -r -e 's:usr/lib(64)?/(.*/)?libc\.a::'` ; \ |
| ARCH_LIB_DIR=`echo $${ARCH_LIBC_A_LOCATION} | sed -r -e 's:.*/usr/(lib(64)?)/(.*/)?libc.a:\1:'` ; \ |
| SUPPORT_LIB_DIR="" ; \ |
| if test `find $${ARCH_SYSROOT_DIR} -name 'libstdc++.a' | wc -l` -eq 0 ; then \ |
| LIBSTDCPP_A_LOCATION=$$(LANG=C $(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS) -print-file-name=libstdc++.a) ; \ |
| if [ -e "$${LIBSTDCPP_A_LOCATION}" ]; then \ |
| SUPPORT_LIB_DIR=`readlink -f $${LIBSTDCPP_A_LOCATION} | sed -r -e 's:libstdc\+\+\.a::'` ; \ |
| fi ; \ |
| fi ; \ |
| ARCH_SUBDIR=`echo $${ARCH_SYSROOT_DIR} | sed -r -e "s:^$${SYSROOT_DIR}(.*)/$$:\1:"` ; \ |
| mkdir -p $(TARGET_DIR)/lib ; \ |
| if test -z "$(BR2_PREFER_STATIC_LIB)" ; then \ |
| $(call MESSAGE,"Copying external toolchain libraries to target...") ; \ |
| for libs in $(LIB_EXTERNAL_LIBS); do \ |
| $(call copy_toolchain_lib_root,$${ARCH_SYSROOT_DIR},$${SUPPORT_LIB_DIR},$${ARCH_LIB_DIR},$$libs,/lib); \ |
| done ; \ |
| for libs in $(USR_LIB_EXTERNAL_LIBS); do \ |
| $(call copy_toolchain_lib_root,$${ARCH_SYSROOT_DIR},$${SUPPORT_LIB_DIR},$${ARCH_LIB_DIR},$$libs,/usr/lib); \ |
| done ; \ |
| fi ; \ |
| $(call MESSAGE,"Copying external toolchain sysroot to staging...") ; \ |
| $(call copy_toolchain_sysroot,$${SYSROOT_DIR},$${ARCH_SYSROOT_DIR},$${ARCH_SUBDIR},$${ARCH_LIB_DIR},$${SUPPORT_LIB_DIR}) ; \ |
| if [ -L $${ARCH_SYSROOT_DIR}/lib64 ] ; then \ |
| $(call create_lib64_symlinks) ; \ |
| fi ; \ |
| if test x"$(BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY)" == x"y"; then \ |
| $(call MESSAGE,"Copying gdbserver") ; \ |
| gdbserver_found=0 ; \ |
| for d in $${ARCH_SYSROOT_DIR} $${ARCH_SYSROOT_DIR}/../debug-root/ ; do \ |
| if test -f $${d}/usr/bin/gdbserver ; then \ |
| install -m 0755 -D $${d}/usr/bin/gdbserver $(TARGET_DIR)/usr/bin/gdbserver ; \ |
| gdbserver_found=1 ; \ |
| break ; \ |
| fi ; \ |
| done ; \ |
| if [ $${gdbserver_found} -eq 0 ] ; then \ |
| echo "Could not find gdbserver in external toolchain" ; \ |
| exit 1 ; \ |
| fi ; \ |
| fi ; \ |
| touch $@ |
| |
| # Build toolchain wrapper for preprocessor, C and C++ compiler, and setup |
| # symlinks for everything else |
| $(HOST_DIR)/usr/bin/ext-toolchain-wrapper: $(STAMP_DIR)/ext-toolchain-installed |
| $(Q)$(call MESSAGE,"Building ext-toolchain wrapper") |
| mkdir -p $(HOST_DIR)/usr/bin; cd $(HOST_DIR)/usr/bin; \ |
| for i in $(TOOLCHAIN_EXTERNAL_CROSS)*; do \ |
| base=$${i##*/}; \ |
| case "$$base" in \ |
| *cc|*cc-*|*++|*++-*|*cpp) \ |
| ln -sf $(@F) $$base; \ |
| ;; \ |
| *) \ |
| ln -sf $$(echo $$i | sed 's%^$(HOST_DIR)%../..%') .; \ |
| ;; \ |
| esac; \ |
| done ; |
| $(HOSTCC) $(HOST_CFLAGS) $(TOOLCHAIN_EXTERNAL_WRAPPER_ARGS) -s \ |
| toolchain/toolchain-external/ext-toolchain-wrapper.c -o $@ |
| |
| # 'uclibc' is the target to provide toolchain / staging dir |
| uclibc: dependencies $(HOST_DIR)/usr/bin/ext-toolchain-wrapper |
| |
| ifeq ($(BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD),y) |
| # download ext toolchain if so configured |
| uclibc-source: $(addprefix $(DL_DIR)/,$(TOOLCHAIN_EXTERNAL_SOURCE)) |
| endif |