blob: b92b656fc5130705e80f6ed8a57ba1a369226e50 [file] [log] [blame]
#
# Config.in.legacy - support for backward compatibility
#
# When an existing Config.in symbol is removed, it should be added again in this
# file, and take appropriate action to approximate backward compatibility. If
# there is an equivalent (set of) new symbols, these can just be select'ed by
# the old symbol. This makes sure that running 'make oldconfig' will make things
# "just work" when upgrading to a new buildroot version. If the change is too
# fundamental and cannot be fixed by a simple select, then the old symbol should
# select BR2_LEGACY. If that symbol is set, the build will issue an error.
#
# When adding legacy symbols to this file, add them to the front. The oldest
# symbols will be removed again after about two years.
#
# The symbol should be copied as-is from the place where it was previously
# defined, but the help text should be removed or replaced with something that
# explains how to fix it.
config BR2_LEGACY
bool
help
This option is selected automatically when your old .config uses an
option that no longer exists in current buildroot. In that case, the
build will fail. Look for config options which are selected in the
menu below: they no longer exist and should be replaced by something
else.
# This comment fits exactly in a 80-column display
comment "Legacy detected: check the content of the menu below"
depends on BR2_LEGACY
menu "Legacy config options"
if BR2_LEGACY
comment "Your old configuration uses legacy options that no "
comment "longer exist in buildroot. "
comment "Please look at the options which have been selected "
comment "and read their help text. "
comment "As long as these options stay selected, the build "
comment "will fail. "
comment "Note: at some point in the future, the oldest legacy"
comment "options will be removed, and configuration files "
comment "that still have those options set, will fail to "
comment "build, or run, in unpredictable ways. "
endif
###############################################################################
comment "Legacy options removed in 2013.08"
config BR2_PACKAGE_DOSFSTOOLS_DOSFSCK
bool "dosfstools dosfsck renamed to fsck.fat"
select BR2_LEGACY
select BR2_PACKAGE_DOSFSTOOLS_FSCK_FAT
help
dosfsck was renamed upstream to fsck.fat for consistency.
config BR2_PACKAGE_DOSFSTOOLS_DOSFSLABEL
bool "dosfstools dosfslabel renamed to fatlabel"
select BR2_LEGACY
select BR2_PACKAGE_DOSFSTOOLS_FATLABEL
help
doslabel was renamed upstream to fatlabel for consistency.
config BR2_PACKAGE_DOSFSTOOLS_MKDOSFS
bool "dosfstools mkdosfs renamed to mkfs.fat"
select BR2_LEGACY
select BR2_PACKAGE_DOSFSTOOLS_MKFS_FAT
help
mkdosfs was renamed upstream to mkfs.fat for consistency.
config BR2_ELF2FLT
bool "the elf2flt option has been renamed"
select BR2_LEGACY
help
The BR2_ELF2FLT option has been renamed to
BR2_PACKAGE_HOST_ELF2FLT due to the conversion of elf2flt to
the package infrastructure.
config BR2_VFP_FLOAT
bool "the ARM VFP floating point option has been renamed"
select BR2_LEGACY
help
Due to a major refactoring of the floating-point handling of
the ARM architecture support, the BR2_VFP_FLOAT option has
been replaced with a choice of options that allows to select
between various VFP versions/capabilities.
###############################################################################
comment "Legacy options removed in 2013.05"
config BR2_PACKAGE_LINUX_FIRMWARE_RTL_8192
bool "Realtek 8192 replaced by Realtek 81xx"
select BR2_LEGACY
select BR2_PACKAGE_LINUX_FIRMWARE_RTL_81XX
help
Now covers the whole Realtek 81xx familly: 8188/8192.
config BR2_PACKAGE_LINUX_FIRMWARE_RTL_8712
bool "Realtek 8712 replaced by Realtek 87xx"
select BR2_LEGACY
select BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX
help
Now covers the whole Realtek 87xx familly: 8712/8723.
###############################################################################
comment "Legacy options removed in 2013.02"
config BR2_sa110
bool "sa110 ARM target switched to strongarm"
select BR2_LEGACY
select BR2_strongarm
help
The SA110 is the same as a generic StrongARM, it just differs
in speed, peripherals and cache.
config BR2_sa1100
bool "sa1100 ARM target switched to strongarm"
select BR2_LEGACY
select BR2_strongarm
help
The SA1100 is the same as a generic StrongARM, it just differs
in speed, peripherals and cache.
config BR2_PACKAGE_GDISK
bool "gdisk has been replaced by gptfdisk"
select BR2_LEGACY
select BR2_PACKAGE_GPTFDISK
help
The option has been renamed BR2_PACKAGE_GPTFDISK.
config BR2_PACKAGE_GDISK_GDISK
bool "gdisk tool from gdisk has been replaced by gdisk in gptfdisk"
select BR2_LEGACY
select BR2_PACKAGE_GPTFDISK
select BR2_PACKAGE_GPTFDISK_GDISK
help
The option has been renamed BR2_PACKAGE_GPTFDISK_GDISK.
config BR2_PACKAGE_GDISK_SGDISK
bool "sgdisk tool from gdisk has been replaced by sgdisk in gptfdisk"
select BR2_LEGACY
select BR2_PACKAGE_GPTFDISK
select BR2_PACKAGE_GPTFDISK_SGDISK
help
The option has been renamed BR2_PACKAGE_GPTFDISK_SGDISK.
config BR2_PACKAGE_GDB_HOST
bool "gdb for the host option has been renamed"
select BR2_PACKAGE_HOST_GDB
select BR2_LEGACY
help
Due to the conversion of gdb to the package infrastructure,
the BR2_PACKAGE_GDB_HOST option has been renamed
BR2_PACKAGE_HOST_GDB.
config BR2_PACKAGE_DIRECTB_DITHER_RGB16
bool "DirectFB RGB16 dithering option has been renamed"
select BR2_PACKAGE_DIRECTFB_DITHER_RGB16
select BR2_LEGACY
help
The option has been renamed
BR2_PACKAGE_DIRECTFB_DITHER_RGB16.
config BR2_PACKAGE_DIRECTB_TESTS
bool "DirectFB Tests option has been renamed"
select BR2_PACKAGE_DIRECTFB_TESTS
select BR2_LEGACY
help
The option has been renamed
BR2_PACKAGE_DIRECTFB_TESTS.
###############################################################################
comment "Legacy options removed in 2012.11"
config BR2_PACKAGE_CUSTOMIZE
bool "customize package has been removed"
select BR2_LEGACY
help
The 'customize' special package has been removed. Instead,
we recommend to create either your own packages, or use a
post-build script to customize your root filesystem. See
Buildroot's documentation for more details.
config BR2_PACKAGE_XSERVER_xorg
bool "X.org modular server"
select BR2_LEGACY
select BR2_PACKAGE_XSERVER_XORG_SERVER_MODULAR
help
The option has been renamed
BR2_PACKAGE_XSERVER_XORG_SERVER_MODULAR.
config BR2_PACKAGE_XSERVER_tinyx
bool "KDrive / TinyX server"
select BR2_LEGACY
select BR2_PACKAGE_XSERVER_XORG_SERVER_KDRIVE
help
The option has been renamed
BR2_PACKAGE_XSERVER_XORG_SERVER_KDRIVE.
config BR2_PACKAGE_PTHREAD_STUBS
bool "pthread-stubs option has been renamed"
select BR2_LEGACY
select BR2_PACKAGE_XLIB_LIBPTHREAD_STUBS
depends on BR2_PACKAGE_XORG7
help
For consistency reason, the pthread-stubs package has been
renamed to xlib_libpthread-stubs.
###############################################################################
comment "Legacy options removed in 2012.08"
config BR2_PACKAGE_GETTEXT_STATIC
bool "libgettext.a is now selected by BR2_PREFER_STATIC_LIB"
select BR2_LEGACY
help
To build a static gettext library, select BR2_PREFER_STATIC_LIB.
config BR2_PACKAGE_LIBINTL
bool "libintl"
select BR2_LEGACY
select BR2_PACKAGE_GETTEXT
help
libintl is now installed by selecting BR2_PACKAGE_GETTEXT. This now
only installs the library, not the executables.
config BR2_PACKAGE_INPUT_TOOLS_EVTEST
bool "input-tools evtest is now a separate package evtest"
select BR2_LEGACY
select BR2_PACKAGE_EVTEST
help
The evtest program from input-tools is now a separate package.
config BR2_BFIN_FDPIC
bool "BR2_BFIN_FDPIC is now BR2_BINFMT_FDPIC"
select BR2_BINFMT_FDPIC
select BR2_LEGACY
config BR2_BFIN_FLAT
bool "BR2_BFIN_FLAT is now BR2_BINFMT_FLAT"
select BR2_BINFMT_FLAT
select BR2_LEGACY
endmenu