| From f2cb904f074bc7e90be475488872a82270e9bae7 Mon Sep 17 00:00:00 2001 |
| From: =?UTF-8?q?J=C3=B6rg=20Krause?= <joerg.krause@embedded.rocks> |
| Date: Mon, 9 Jan 2017 21:36:38 +0100 |
| Subject: [PATCH 2/2] ARM: dts: sun7i: Add wifi dt node on Banana Pro |
| MIME-Version: 1.0 |
| Content-Type: text/plain; charset=UTF-8 |
| Content-Transfer-Encoding: 8bit |
| |
| The Banana Pro has an AMPAK AP6181 WiFi+Bluetooth module. The WiFi part |
| is a BCM43362 IC connected to MMC3 of the A20 SoC via SDIO. The IC also |
| takes a power enable signal via GPIO. |
| |
| This commit adds a device-tree node to power it up, so the mmc subsys |
| can scan it, and enables the mmc controller which is connected to it. |
| |
| As the wifi enable pin of the AP6181 module is not really a regulator, |
| switch the mmc3 node to the mmc-pwrseq framework for controlling it. |
| This more accurately reflectes how the hardware actually works. |
| |
| Signed-off-by: Jรถrg Krause <joerg.krause@embedded.rocks> |
| Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> |
| --- |
| arch/arm/boot/dts/sun7i-a20-bananapro.dts | 29 +++++++++++++++++------------ |
| 1 file changed, 17 insertions(+), 12 deletions(-) |
| |
| diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts |
| index 03799c647e13..83516bc81225 100644 |
| --- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts |
| +++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts |
| @@ -76,6 +76,13 @@ |
| }; |
| }; |
| |
| + wifi_pwrseq: wifi-pwrseq { |
| + compatible = "mmc-pwrseq-simple"; |
| + pinctrl-names = "default"; |
| + pinctrl-0 = <&vmmc3_pin_bananapro>; |
| + reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; |
| + }; |
| + |
| reg_gmac_3v3: gmac-3v3 { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| @@ -87,17 +94,6 @@ |
| enable-active-high; |
| gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; |
| }; |
| - |
| - reg_vmmc3: vmmc3 { |
| - compatible = "regulator-fixed"; |
| - pinctrl-names = "default"; |
| - pinctrl-0 = <&vmmc3_pin_bananapro>; |
| - regulator-name = "vmmc3"; |
| - regulator-min-microvolt = <3300000>; |
| - regulator-max-microvolt = <3300000>; |
| - enable-active-high; |
| - gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; |
| - }; |
| }; |
| |
| &ahci { |
| @@ -170,10 +166,19 @@ |
| &mmc3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mmc3_pins_a>; |
| - vmmc-supply = <®_vmmc3>; |
| + vmmc-supply = <®_vcc3v3>; |
| + mmc-pwrseq = <&wifi_pwrseq>; |
| bus-width = <4>; |
| non-removable; |
| status = "okay"; |
| + |
| + brcmf: bcrmf@1 { |
| + reg = <1>; |
| + compatible = "brcm,bcm4329-fmac"; |
| + interrupt-parent = <&pio>; |
| + interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>; |
| + interrupt-names = "host-wake"; |
| + }; |
| }; |
| |
| &ohci0 { |
| -- |
| 2.11.0 |
| |