blob: abba07e889c4619fc7ffefdd877e3b4493f786a2 [file] [log] [blame]
config BR2_PACKAGE_OPENOCD
bool "openocd"
help
OpenOCD - Open On-Chip Debugger
http://openocd.sourceforge.net/
if BR2_PACKAGE_OPENOCD
comment "Adapters"
config BR2_PACKAGE_OPENOCD_CMSIS_DAP
bool "CMSIS-DAP compliant debuggers"
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
depends on BR2_PACKAGE_HAS_UDEV # hidapi
depends on BR2_TOOLCHAIN_HAS_THREADS_NPTL # hidapi
select BR2_PACKAGE_LIBUSB
select BR2_PACKAGE_HIDAPI
help
Enable support for CMSIS-DAP compliant debuggers (i.e
Atmel/Microchip EDBG, etc.)
config BR2_PACKAGE_OPENOCD_FTDI
bool "MPSSE mode of FTDI based devices"
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
select BR2_PACKAGE_LIBUSB
help
Enable building support for the MPSSE mode of FTDI
(FT2xxx/FT4xxx) based devices (default is auto)
config BR2_PACKAGE_OPENOCD_STLINK
bool "ST-Link JTAG Programmer"
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
select BR2_PACKAGE_LIBUSB
help
Enable building support for the ST-Link JTAG
Programmer (default is auto)
config BR2_PACKAGE_OPENOCD_TI_ICDI
bool "TI ICDI JTAG Programmer"
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
select BR2_PACKAGE_LIBUSB
help
Enable building support for the TI ICDI JTAG
Programmer (default is auto)
config BR2_PACKAGE_OPENOCD_ULINK
bool "Keil ULINK JTAG Programmer"
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
select BR2_PACKAGE_LIBUSB
help
Enable building support for the Keil ULINK JTAG
Programmer (default is auto)
config BR2_PACKAGE_OPENOCD_UBLASTER2
bool "Altera USB-Blaster II Compatible"
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
select BR2_PACKAGE_LIBUSB
help
Enable building support for the Altera USB-Blaster
II Compatible (default is auto)
config BR2_PACKAGE_OPENOCD_JLINK
bool "Segger J-Link JTAG Programmer"
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
select BR2_PACKAGE_LIBUSB
help
Segger J-Link JTAG Programmer and clone such as Atmel
SAM-ICE
config BR2_PACKAGE_OPENOCD_OSDBM
bool "OSDBM JTAG (only) Programmer"
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
select BR2_PACKAGE_LIBUSB
help
Enable building support for the OSBDM (JTAG only)
Programmer (default is auto)
config BR2_PACKAGE_OPENOCD_OPENDOUS
bool "eStick/opendous JTAG Programmer"
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
select BR2_PACKAGE_LIBUSB
help
Enable building support for the eStick/opendous JTAG
Programmer (default is auto)
config BR2_PACKAGE_OPENOCD_AICE
bool "Andes JTAG Programmer"
depends on BR2_USE_MMU # use fork()
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
select BR2_PACKAGE_LIBUSB
help
Enable building support for the Andes JTAG
Programmer (default is auto)
config BR2_PACKAGE_OPENOCD_VSLLINK
bool "Versaloon-Link JTAG Programmer"
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb
select BR2_PACKAGE_LIBUSB
select BR2_PACKAGE_LIBUSB_COMPAT
help
Enable building support for the Versaloon-Link JTAG
Programmer (default is auto)
config BR2_PACKAGE_OPENOCD_USBPROG
bool "USBProg JTAG Programmer"
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb
select BR2_PACKAGE_LIBUSB
select BR2_PACKAGE_LIBUSB_COMPAT
help
Enable building support for the USBProg JTAG
Programmer (default is auto)
config BR2_PACKAGE_OPENOCD_RLINK
bool "Raisonance RLink JTAG Programmer"
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb
select BR2_PACKAGE_LIBUSB
select BR2_PACKAGE_LIBUSB_COMPAT
help
Enable building support for the Raisonance RLink
JTAG Programmer (default is auto)
config BR2_PACKAGE_OPENOCD_ARMEW
bool "Olimex ARM-JTAG-EW Programmer"
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb
select BR2_PACKAGE_LIBUSB
select BR2_PACKAGE_LIBUSB_COMPAT
help
Enable building support for the Olimex ARM-JTAG-EW
Programmer (default is auto)
config BR2_PACKAGE_OPENOCD_PARPORT
bool "pc parallel port driver"
help
Enable building the pc parallel port driver
config BR2_PACKAGE_OPENOCD_VPI
bool "JTAG VPI"
help
Enable building support for JTAG VPI
config BR2_PACKAGE_OPENOCD_UBLASTER
bool "Altera USB-Blaster"
depends on BR2_TOOLCHAIN_HAS_THREADS # libftdi -> libusb
select BR2_PACKAGE_LIBFTDI1
help
Enable building support for the Altera USB-Blaster
using the libftdi driver, opensource alternate of
FTD2XX
config BR2_PACKAGE_OPENOCD_AMTJT
bool "Amontec JTAG-Accelerator"
help
Enable building the Amontec JTAG-Accelerator driver
if BR2_arm
config BR2_PACKAGE_OPENOCD_EP93XX
bool "EP93xx based SBCs"
help
Enable building support for EP93xx based SBCs
config BR2_PACKAGE_OPENOCD_AT91RM
bool "AT91RM9200 based SBCs"
help
Enable building support for AT91RM9200 based SBCs
config BR2_PACKAGE_OPENOCD_BCM2835
bool "bitbanging on BCM2835"
help
Enable building support for bitbanging on BCM2835
(as found in Raspberry Pi)
endif # BR2_arm
config BR2_PACKAGE_OPENOCD_GW16012
bool "Gateworks GW16012 JTAG Programmer"
help
Enable building support for the Gateworks GW16012
JTAG Programmer
config BR2_PACKAGE_OPENOCD_PRESTO
bool "ASIX Presto Programmer"
depends on BR2_TOOLCHAIN_HAS_THREADS # libftdi -> libusb
select BR2_PACKAGE_LIBFTDI1
help
Enable building support for ASIX Presto Programmer
using the libftdi driver
config BR2_PACKAGE_OPENOCD_OPENJTAG
bool "OpenJTAG Programmer"
depends on BR2_TOOLCHAIN_HAS_THREADS # libftdi -> libusb
select BR2_PACKAGE_LIBFTDI1
select BR2_PACKAGE_LIBUSB
select BR2_PACKAGE_LIBUSB_COMPAT # needs usb.h
help
Enable building support for the OpenJTAG Programmer
with ftdi driver
config BR2_PACKAGE_OPENOCD_BUSPIRATE
bool "Buspirate"
help
Enable building support for the Buspirate
config BR2_PACKAGE_OPENOCD_SYSFS
bool "programming via sysfs gpios"
help
Enable building support for programming driven via
sysfs gpios.
# Many adapters need libusb or libusb-compat, which require threads,
# but we don't want to duplicate this comment for all adapters that
# select libusb or libusb-compat.
comment "many openocd adapters needs a toolchain w/ threads"
depends on !BR2_TOOLCHAIN_HAS_THREADS
endif # BR2_PACKAGE_OPENOCD