package/gcc/gcc.mk

################################################################################
#
# Common variables for the gcc-initial and gcc-final packages.
#
################################################################################

#
# Version, site and source
#

GCC_VERSION = $(call qstrip,$(BR2_GCC_VERSION))

ifeq ($(BR2_GCC_VERSION_ARC),y)
GCC_SITE = $(call github,foss-for-synopsys-dwc-arc-processors,gcc,$(GCC_VERSION))
GCC_SOURCE = gcc-$(GCC_VERSION).tar.gz
else ifeq ($(BR2_GCC_VERSION_CSKY),y)
GCC_SITE = $(call github,c-sky,gcc,$(GCC_VERSION))
GCC_SOURCE = gcc-$(GCC_VERSION).tar.gz
else
GCC_SITE = $(BR2_GNU_MIRROR:/=)/gcc/gcc-$(GCC_VERSION)
GCC_SOURCE = gcc-$(GCC_VERSION).tar.xz
endif

#
# Xtensa special hook
#
define HOST_GCC_XTENSA_OVERLAY_EXTRACT
	$(call arch-xtensa-overlay-extract,$(@D),gcc)
endef

#
# Apply patches
#

# gcc is a special package, not named gcc, but gcc-initial and
# gcc-final, but patches are nonetheless stored in package/gcc in the
# tree, and potentially in BR2_GLOBAL_PATCH_DIR directories as well.
define HOST_GCC_APPLY_PATCHES
	for patchdir in \
	    package/gcc/$(GCC_VERSION) \
	    $(addsuffix /gcc/$(GCC_VERSION),$(call qstrip,$(BR2_GLOBAL_PATCH_DIR))) \
	    $(addsuffix /gcc,$(call qstrip,$(BR2_GLOBAL_PATCH_DIR))) ; do \
		if test -d $${patchdir}; then \
			$(APPLY_PATCHES) $(@D) $${patchdir} \*.patch || exit 1; \
		fi; \
	done
	$(HOST_GCC_APPLY_POWERPC_PATCH)
endef

HOST_GCC_EXCLUDES = \
	libjava/* libgo/*

#
# Create 'build' directory and configure symlink
#

define HOST_GCC_CONFIGURE_SYMLINK
	mkdir -p $(@D)/build
	ln -sf ../configure $(@D)/build/configure
endef

#
# Common configuration options
#

HOST_GCC_COMMON_DEPENDENCIES = \
	host-binutils \
	host-gmp \
	host-mpc \
	host-mpfr \
	$(if $(BR2_BINFMT_FLAT),host-elf2flt)

HOST_GCC_COMMON_CONF_OPTS = \
	--target=$(GNU_TARGET_NAME) \
	--with-sysroot=$(STAGING_DIR) \
	--enable-__cxa_atexit \
	--with-gnu-ld \
	--disable-libssp \
	--disable-multilib \
	--disable-decimal-float \
	--with-gmp=$(HOST_DIR) \
	--with-mpc=$(HOST_DIR) \
	--with-mpfr=$(HOST_DIR) \
	--with-pkgversion="Buildroot $(BR2_VERSION_FULL)" \
	--with-bugurl="http://bugs.buildroot.net/" \
	--without-zstd

# Don't build documentation. It takes up extra space / build time,
# and sometimes needs specific makeinfo versions to work
HOST_GCC_COMMON_CONF_ENV = \
	MAKEINFO=missing

GCC_COMMON_TARGET_CFLAGS = $(TARGET_CFLAGS)
GCC_COMMON_TARGET_CXXFLAGS = $(TARGET_CXXFLAGS)

# used to fix ../../../../libsanitizer/libbacktrace/../../libbacktrace/elf.c:772:21: error: 'st.st_mode' may be used uninitialized in this function [-Werror=maybe-uninitialized]
ifeq ($(BR2_ENABLE_DEBUG),y)
GCC_COMMON_TARGET_CFLAGS += -Wno-error
endif

# Propagate options used for target software building to GCC target libs
HOST_GCC_COMMON_CONF_ENV += CFLAGS_FOR_TARGET="$(GCC_COMMON_TARGET_CFLAGS)"
HOST_GCC_COMMON_CONF_ENV += CXXFLAGS_FOR_TARGET="$(GCC_COMMON_TARGET_CXXFLAGS)"

# libitm needs sparc V9+
ifeq ($(BR2_sparc_v8)$(BR2_sparc_leon3),y)
HOST_GCC_COMMON_CONF_OPTS += --disable-libitm
endif

# libmpx uses secure_getenv and struct _libc_fpstate not present in musl
ifeq ($(BR2_TOOLCHAIN_BUILDROOT_MUSL)$(BR2_TOOLCHAIN_GCC_AT_LEAST_6),yy)
HOST_GCC_COMMON_CONF_OPTS += --disable-libmpx
endif

# quadmath support requires wchar
ifeq ($(BR2_USE_WCHAR)$(BR2_TOOLCHAIN_HAS_LIBQUADMATH),yy)
HOST_GCC_COMMON_CONF_OPTS += --enable-libquadmath
else
HOST_GCC_COMMON_CONF_OPTS += --disable-libquadmath
endif

# Disable libsanitizer due to a build issue with gcc 7.5 and glibc 2.31.
# It would require to backport the following upstream commit
# https://gcc.gnu.org/git/?p=gcc.git;a=commitdiff;h=4abc46b51af5751d657764d0c44b8a4aeed06302
# but it conflict with gcc 7.5 libsanitizer code.
# Disable libsanitizer since the gcc 7.5 branch is now closed
# (unmaintained) and it's not a trivial merge.
ifeq ($(BR2_TOOLCHAIN_BUILDROOT_GLIBC)$(BR2_GCC_VERSION_7_X),yy)
HOST_GCC_COMMON_CONF_OPTS += --disable-libsanitizer
endif

# libsanitizer requires wordexp, not in default uClibc config. Also
# doesn't build properly with musl.
ifeq ($(BR2_TOOLCHAIN_BUILDROOT_UCLIBC)$(BR2_TOOLCHAIN_BUILDROOT_MUSL),y)
HOST_GCC_COMMON_CONF_OPTS += --disable-libsanitizer
endif

# libsanitizer is broken for SPARC
# https://bugs.busybox.net/show_bug.cgi?id=7951
ifeq ($(BR2_sparc)$(BR2_sparc64),y)
HOST_GCC_COMMON_CONF_OPTS += --disable-libsanitizer
endif

# TLS support is not needed on uClibc/no-thread and
# uClibc/linux-threads, otherwise, for all other situations (glibc,
# musl and uClibc/NPTL), we need it.
ifeq ($(BR2_TOOLCHAIN_BUILDROOT_UCLIBC)$(BR2_PTHREADS)$(BR2_PTHREADS_NONE),yy)
HOST_GCC_COMMON_CONF_OPTS += --disable-tls
else
HOST_GCC_COMMON_CONF_OPTS += --enable-tls
endif

ifeq ($(BR2_GCC_ENABLE_LTO),y)
HOST_GCC_COMMON_CONF_OPTS += --enable-plugins --enable-lto
endif

ifeq ($(BR2_PTHREADS_NONE),y)
HOST_GCC_COMMON_CONF_OPTS += \
	--disable-threads \
	--disable-libitm \
	--disable-libatomic
else
HOST_GCC_COMMON_CONF_OPTS += --enable-threads
endif

# gcc 5 doesn't need cloog any more, see
# https://gcc.gnu.org/gcc-5/changes.html and we don't support graphite
# on GCC 4.9.x, so only isl is needed.
ifeq ($(BR2_GCC_ENABLE_GRAPHITE),y)
HOST_GCC_COMMON_DEPENDENCIES += host-isl
HOST_GCC_COMMON_CONF_OPTS += --with-isl=$(HOST_DIR)
else
HOST_GCC_COMMON_CONF_OPTS += --without-isl --without-cloog
endif

ifeq ($(BR2_arc),y)
HOST_GCC_COMMON_DEPENDENCIES += host-flex host-bison
endif

ifeq ($(BR2_SOFT_FLOAT),y)
# only mips*-*-*, arm*-*-* and sparc*-*-* accept --with-float
# powerpc seems to be needing it as well
ifeq ($(BR2_arm)$(BR2_armeb)$(BR2_mips)$(BR2_mipsel)$(BR2_mips64)$(BR2_mips64el)$(BR2_powerpc)$(BR2_sparc),y)
HOST_GCC_COMMON_CONF_OPTS += --with-float=soft
endif
endif

# Determine arch/tune/abi/cpu options
ifneq ($(GCC_TARGET_ARCH),)
HOST_GCC_COMMON_CONF_OPTS += --with-arch="$(GCC_TARGET_ARCH)"
endif
ifneq ($(GCC_TARGET_ABI),)
HOST_GCC_COMMON_CONF_OPTS += --with-abi="$(GCC_TARGET_ABI)"
endif
ifeq ($(BR2_TOOLCHAIN_HAS_MNAN_OPTION),y)
ifneq ($(GCC_TARGET_NAN),)
HOST_GCC_COMMON_CONF_OPTS += --with-nan="$(GCC_TARGET_NAN)"
endif
endif
ifneq ($(GCC_TARGET_FP32_MODE),)
HOST_GCC_COMMON_CONF_OPTS += --with-fp-32="$(GCC_TARGET_FP32_MODE)"
endif
ifneq ($(GCC_TARGET_CPU),)
HOST_GCC_COMMON_CONF_OPTS += --with-cpu=$(GCC_TARGET_CPU)
endif

ifneq ($(GCC_TARGET_FPU),)
HOST_GCC_COMMON_CONF_OPTS += --with-fpu=$(GCC_TARGET_FPU)
endif

ifneq ($(GCC_TARGET_FLOAT_ABI),)
HOST_GCC_COMMON_CONF_OPTS += --with-float=$(GCC_TARGET_FLOAT_ABI)
endif

ifneq ($(GCC_TARGET_MODE),)
HOST_GCC_COMMON_CONF_OPTS += --with-mode=$(GCC_TARGET_MODE)
endif

# Enable proper double/long double for SPE ABI
ifeq ($(BR2_powerpc_SPE),y)
HOST_GCC_COMMON_CONF_OPTS += \
	--enable-e500_double \
	--with-long-double-128
endif

# PowerPC64 big endian by default uses the elfv1 ABI, and PowerPC 64
# little endian by default uses the elfv2 ABI. However, musl has
# decided to use the elfv2 ABI for both, so we force the elfv2 ABI for
# Power64 big endian when the selected C library is musl.
ifeq ($(BR2_TOOLCHAIN_USES_MUSL)$(BR2_powerpc64),yy)
HOST_GCC_COMMON_CONF_OPTS += \
	--with-abi=elfv2 \
	--without-long-double-128
endif

# Since glibc >= 2.26, poerpc64le requires double/long double which
# requires at least gcc 6.2.
# See sysdeps/powerpc/powerpc64le/configure.ac
ifeq ($(BR2_TOOLCHAIN_USES_GLIBC)$(BR2_TOOLCHAIN_GCC_AT_LEAST_6)$(BR2_powerpc64le),yyy)
HOST_GCC_COMMON_CONF_OPTS += \
	--with-long-double-128
endif

HOST_GCC_COMMON_TOOLCHAIN_WRAPPER_ARGS += -DBR_CROSS_PATH_SUFFIX='".br_real"'

# For gcc-initial, we need to tell gcc that the C library will be
# providing the ssp support, as it can't guess it since the C library
# hasn't been built yet.
#
# For gcc-final, the gcc logic to detect whether SSP support is
# available or not in the C library is not working properly for
# uClibc, so let's be explicit as well.
HOST_GCC_COMMON_MAKE_OPTS = \
	gcc_cv_libc_provides_ssp=$(if $(BR2_TOOLCHAIN_HAS_SSP),yes,no)

ifeq ($(BR2_CCACHE),y)
HOST_GCC_COMMON_CCACHE_HASH_FILES += $(GCC_DL_DIR)/$(GCC_SOURCE)

# Cfr. PATCH_BASE_DIRS in .stamp_patched, but we catch both versioned
# and unversioned patches unconditionally. Moreover, to facilitate the
# addition of gcc patches in BR2_GLOBAL_PATCH_DIR, we allow them to be
# stored in a sub-directory called 'gcc' even if it's not technically
# the name of the package.
HOST_GCC_COMMON_CCACHE_HASH_FILES += \
	$(sort $(wildcard \
		package/gcc/$(GCC_VERSION)/*.patch \
		$(addsuffix /$($(PKG)_RAWNAME)/$(GCC_VERSION)/*.patch,$(call qstrip,$(BR2_GLOBAL_PATCH_DIR))) \
		$(addsuffix /$($(PKG)_RAWNAME)/*.patch,$(call qstrip,$(BR2_GLOBAL_PATCH_DIR))) \
		$(addsuffix /gcc/$(GCC_VERSION)/*.patch,$(call qstrip,$(BR2_GLOBAL_PATCH_DIR))) \
		$(addsuffix /gcc/*.patch,$(call qstrip,$(BR2_GLOBAL_PATCH_DIR)))))
ifeq ($(BR2_xtensa),y)
HOST_GCC_COMMON_CCACHE_HASH_FILES += $(ARCH_XTENSA_OVERLAY_TAR)
endif
ifeq ($(ARCH),powerpc)
ifneq ($(BR2_SOFT_FLOAT),)
HOST_GCC_COMMON_CCACHE_HASH_FILES += package/gcc/$(GCC_VERSION)/1000-powerpc-link-with-math-lib.patch.conditional
endif
endif

# _CONF_OPTS contains some references to the absolute path of $(HOST_DIR)
# and a reference to the Buildroot git revision (BR2_VERSION_FULL),
# so substitute those away.
HOST_GCC_COMMON_TOOLCHAIN_WRAPPER_ARGS += -DBR_CCACHE_HASH=\"`\
	printf '%s\n' $(subst $(HOST_DIR),@HOST_DIR@,\
		$(subst --with-pkgversion="Buildroot $(BR2_VERSION_FULL)",,$($(PKG)_CONF_OPTS))) \
		| sha256sum - $(HOST_GCC_COMMON_CCACHE_HASH_FILES) \
		| cut -c -64 | tr -d '\n'`\"
endif # BR2_CCACHE

# The LTO support in gcc creates wrappers for ar, ranlib and nm which load
# the lto plugin. These wrappers are called *-gcc-ar, *-gcc-ranlib, and
# *-gcc-nm and should be used instead of the real programs when -flto is
# used. However, we should not add the toolchain wrapper for them, and they
# match the *cc-* pattern. Therefore, an additional case is added for *-ar,
# *-ranlib and *-nm.
# According to gfortran manpage, it supports all options supported by gcc, so
# add gfortran to the list of the program called via the Buildroot wrapper.
# Avoid that a .br_real is symlinked a second time.
# Also create <arch>-linux-<tool> symlinks.
define HOST_GCC_INSTALL_WRAPPER_AND_SIMPLE_SYMLINKS
	$(Q)cd $(HOST_DIR)/bin; \
	for i in $(GNU_TARGET_NAME)-*; do \
		case "$$i" in \
		*.br_real) \
			;; \
		*-ar|*-ranlib|*-nm) \
			ln -snf $$i $(ARCH)-linux$${i##$(GNU_TARGET_NAME)}; \
			;; \
		*cc|*cc-*|*++|*++-*|*cpp|*-gfortran|*-gdc) \
			rm -f $$i.br_real; \
			mv $$i $$i.br_real; \
			ln -sf toolchain-wrapper $$i; \
			ln -sf toolchain-wrapper $(ARCH)-linux$${i##$(GNU_TARGET_NAME)}; \
			ln -snf $$i.br_real $(ARCH)-linux$${i##$(GNU_TARGET_NAME)}.br_real; \
			;; \
		*) \
			ln -snf $$i $(ARCH)-linux$${i##$(GNU_TARGET_NAME)}; \
			;; \
		esac; \
	done

endef

include $(sort $(wildcard package/gcc/*/*.mk))