| Sheevaplug |
| ========== |
| |
| Once the build process is finished you will have the following files |
| in the output/images/ directory: |
| |
| - u-boot.kwb |
| - uImage.kirkwood-sheevaplug |
| - rootfs.jffs2 |
| |
| Copy these to a TFTP server, connect ethernet and mini-USB cable and |
| power up the board. Stop the board in U-Boot and update U-Boot by |
| executing: |
| |
| setenv serverip <ipaddress-of-tftp-server> |
| setenv bootfile <path/to/u-boot.kwb> |
| bootp |
| nand erase 0x0 0x80000 |
| nand write $fileaddr 0x0 0x80000 |
| reset |
| |
| Once the new U-Boot boots up, stop it again and update Linux kernel |
| and rootfs by: |
| |
| setenv serverip <ipaddress-of-tftp-server> |
| setenv bootfile <path/to/uImage.kirkwood-sheevaplug> |
| bootp |
| nand erase.part kernel |
| nand write $fileaddr kernel 0x400000 |
| |
| setenv bootfile <path/to/rootfs.jffs2> |
| bootp |
| nand erase.part rootfs |
| nand write $fileaddr rootfs $filesize |
| |
| reset |
