x86: use -cpu max instead of -cpu host
This allows the tests to run under TCG as well. "-cpu max" is not available on
CentOS 7, however that doesn't change much for our CI since we weren't testing
the CentOS 7 + KVM combination anyway.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 8834e59..d97e27e 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -75,6 +75,7 @@
vmexit_mov_to_cr8 vmexit_inl_pmtimer vmexit_ipi vmexit_ipi_halt
vmexit_ple_round_robin vmexit_tscdeadline vmexit_tscdeadline_immed
eventinj msr port80 setjmp sieve syscall tsc rmap_chain umip intel_iommu
+ rdpru pku pks smap tsc_adjust xsave
| tee results.txt
- if grep -q FAIL results.txt ; then exit 1 ; fi
@@ -89,7 +90,7 @@
cmpxchg8b vmexit_cpuid vmexit_mov_from_cr8 vmexit_mov_to_cr8
vmexit_inl_pmtimer vmexit_ipi vmexit_ipi_halt vmexit_ple_round_robin
vmexit_tscdeadline vmexit_tscdeadline_immed eventinj port80 setjmp sieve
- tsc taskswitch umip
+ tsc taskswitch umip rdpru smap tsc_adjust xsave
| tee results.txt
- if grep -q FAIL results.txt ; then exit 1 ; fi
@@ -103,6 +104,7 @@
vmexit_mov_to_cr8 vmexit_inl_pmtimer vmexit_ipi vmexit_ipi_halt
vmexit_ple_round_robin vmexit_tscdeadline vmexit_tscdeadline_immed
eventinj msr port80 setjmp syscall tsc rmap_chain umip intel_iommu
+ rdpru pku pks smap tsc_adjust xsave
| tee results.txt
- grep -q PASS results.txt && ! grep -q FAIL results.txt
diff --git a/x86/unittests.cfg b/x86/unittests.cfg
index 8c39630..90e370f 100644
--- a/x86/unittests.cfg
+++ b/x86/unittests.cfg
@@ -128,12 +128,12 @@
[smap]
file = smap.flat
-extra_params = -cpu host
+extra_params = -cpu max
[pku]
file = pku.flat
arch = x86_64
-extra_params = -cpu host
+extra_params = -cpu max
[pks]
file = pks.flat
@@ -163,7 +163,7 @@
[memory]
file = memory.flat
-extra_params = -cpu host
+extra_params = -cpu max
arch = x86_64
[msr]
@@ -171,12 +171,12 @@
[pmu]
file = pmu.flat
-extra_params = -cpu host
+extra_params = -cpu max
check = /proc/sys/kernel/nmi_watchdog=0
[vmware_backdoors]
file = vmware_backdoors.flat
-extra_params = -machine vmport=on -cpu host
+extra_params = -machine vmport=on -cpu max
check = /sys/module/kvm/parameters/enable_vmware_backdoor=Y
arch = x86_64
@@ -204,12 +204,12 @@
[tsc_adjust]
file = tsc_adjust.flat
-extra_params = -cpu host
+extra_params = -cpu max
[xsave]
file = xsave.flat
arch = x86_64
-extra_params = -cpu host
+extra_params = -cpu max
[rmap_chain]
file = rmap_chain.flat
@@ -218,7 +218,7 @@
[svm]
file = svm.flat
smp = 2
-extra_params = -cpu host,+svm -m 4g
+extra_params = -cpu max,+svm -m 4g
arch = x86_64
[taskswitch]
@@ -248,7 +248,7 @@
[rdpru]
file = rdpru.flat
-extra_params = -cpu host
+extra_params = -cpu max
arch = x86_64
[umip]
@@ -261,33 +261,33 @@
[vmx]
file = vmx.flat
-extra_params = -cpu host,+vmx -append "-exit_monitor_from_l2_test -ept_access* -vmx_smp* -vmx_vmcs_shadow_test -atomic_switch_overflow_msrs_test -vmx_init_signal_test -vmx_apic_passthrough_tpr_threshold_test"
+extra_params = -cpu max,+vmx -append "-exit_monitor_from_l2_test -ept_access* -vmx_smp* -vmx_vmcs_shadow_test -atomic_switch_overflow_msrs_test -vmx_init_signal_test -vmx_apic_passthrough_tpr_threshold_test"
arch = x86_64
groups = vmx
[ept]
file = vmx.flat
-extra_params = -cpu host,host-phys-bits,+vmx -m 2560 -append "ept_access*"
+extra_params = -cpu max,host-phys-bits,+vmx -m 2560 -append "ept_access*"
arch = x86_64
groups = vmx
[vmx_eoi_bitmap_ioapic_scan]
file = vmx.flat
smp = 2
-extra_params = -cpu host,+vmx -m 2048 -append vmx_eoi_bitmap_ioapic_scan_test
+extra_params = -cpu max,+vmx -m 2048 -append vmx_eoi_bitmap_ioapic_scan_test
arch = x86_64
groups = vmx
[vmx_hlt_with_rvi_test]
file = vmx.flat
-extra_params = -cpu host,+vmx -append vmx_hlt_with_rvi_test
+extra_params = -cpu max,+vmx -append vmx_hlt_with_rvi_test
arch = x86_64
groups = vmx
timeout = 10
[vmx_apicv_test]
file = vmx.flat
-extra_params = -cpu host,+vmx -append "apic_reg_virt_test virt_x2apic_mode_test"
+extra_params = -cpu max,+vmx -append "apic_reg_virt_test virt_x2apic_mode_test"
arch = x86_64
groups = vmx
timeout = 10
@@ -295,14 +295,14 @@
[vmx_apic_passthrough_thread]
file = vmx.flat
smp = 2
-extra_params = -cpu host,+vmx -m 2048 -append vmx_apic_passthrough_thread_test
+extra_params = -cpu max,+vmx -m 2048 -append vmx_apic_passthrough_thread_test
arch = x86_64
groups = vmx
[vmx_init_signal_test]
file = vmx.flat
smp = 2
-extra_params = -cpu host,+vmx -m 2048 -append vmx_init_signal_test
+extra_params = -cpu max,+vmx -m 2048 -append vmx_init_signal_test
arch = x86_64
groups = vmx
timeout = 10
@@ -310,21 +310,21 @@
[vmx_sipi_signal_test]
file = vmx.flat
smp = 2
-extra_params = -cpu host,+vmx -m 2048 -append vmx_sipi_signal_test
+extra_params = -cpu max,+vmx -m 2048 -append vmx_sipi_signal_test
arch = x86_64
groups = vmx
timeout = 10
[vmx_apic_passthrough_tpr_threshold_test]
file = vmx.flat
-extra_params = -cpu host,+vmx -m 2048 -append vmx_apic_passthrough_tpr_threshold_test
+extra_params = -cpu max,+vmx -m 2048 -append vmx_apic_passthrough_tpr_threshold_test
arch = x86_64
groups = vmx
timeout = 10
[vmx_vmcs_shadow_test]
file = vmx.flat
-extra_params = -cpu host,+vmx -append vmx_vmcs_shadow_test
+extra_params = -cpu max,+vmx -append vmx_vmcs_shadow_test
arch = x86_64
groups = vmx
@@ -367,5 +367,5 @@
[tsx-ctrl]
file = tsx-ctrl.flat
-extra_params = -cpu host
+extra_params = -cpu max
groups = tsx-ctrl
