powerpc/emulator.c - kvm-unit-tests - Git at Google

 /*
  * Test some powerpc instructions
  */

 #include <libcflat.h>
 #include <asm/processor.h>

 static int verbose;
 static int volatile is_invalid;
 static int volatile alignment;

 static void program_check_handler(struct pt_regs *regs, void *opaque)
 {
 	int *data = opaque;

 	if (verbose) {
 		printf("Detected invalid instruction %#018lx: %08x\n",
 		       regs->nip, *(uint32_t*)regs->nip);
 	}

 	/* the result is bit 16 to 19 of SRR1
 	 * bit 0: SRR0 contains the address of the next instruction
 	 * bit 1: Trap
 	 * bit 2: Privileged instruction
 	 * bit 3: Illegal instruction
 	 * bit 4: FP enabled exception type
 	 */

 	*data = regs->msr >> 16;

 	regs->nip += 4;
 }

 static void alignment_handler(struct pt_regs *regs, void *opaque)
 {
 	int *data = opaque;

 	if (verbose) {
 		printf("Detected alignment exception %#018lx: %08x\n",
 		       regs->nip, *(uint32_t*)regs->nip);
 	}

 	*data = 1;

 	regs->nip += 4;
 }

 static void test_illegal(void)
 {
 	report_prefix_push("invalid");

 	is_invalid = 0;

 	asm volatile (".long 0");

 	report(is_invalid == 8, "exception"); /* illegal instruction */

 	report_prefix_pop();
 }

 static void test_64bit(void)
 {
 	uint64_t msr;

 	report_prefix_push("64bit");

 	asm("mfmsr %[msr]": [msr] "=r" (msr));

 	report(msr & 0x8000000000000000UL, "detected");

 	report_prefix_pop();
 }

 /**
  * Test 'Load String Word Immediate' instruction
  */
 static void test_lswi(void)
 {
 	int i;
 	char addr[128];
 	uint64_t regs[32];

 	report_prefix_push("lswi");

 	/* fill memory with sequence */
 	for (i = 0; i < 128; i++)
 		addr[i] = 1 + i;

 #if  __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__

 	/*
 	 * lswi is supposed to cause an alignment exception in little endian
 	 * mode, but to be able to check this, we also have to specify the
 	 * opcode without mnemonic here since newer versions of GCC refuse
 	 * "lswi" when compiling in little endian mode.
 	 */
 	alignment = 0;
 	asm volatile ("mr r12,%[addr];"
 		      ".long 0x7d6c24aa;"       /* lswi r11,r12,4 */
 		      "std r11,0(%[regs]);"
 		       :: [addr] "r" (addr), [regs] "r" (regs)
 		       : "r11", "r12", "memory");
 	report(alignment, "alignment");

 #else

 	/* check incomplete register filling */
 	asm volatile ("li r12,-1;"
 		      "mr r11, r12;"
 		      "lswi r11, %[addr], %[len];"
 		      "std r11, 0*8(%[regs]);"
 		      "std r12, 1*8(%[regs]);"
 		      ::
 		      [len] "i" (3),
 		      [addr] "b" (addr),
 		      [regs] "r" (regs)
 		      :
 		      "r11", "r12", "memory");
 	report(regs[0] == 0x01020300 && regs[1] == (uint64_t)-1, "partial");

 	/* check NB = 0 ==> 32 bytes. */
 	asm volatile ("li r19,-1;"
 		      "mr r11, r19; mr r12, r19; mr r13, r19;"
 		      "mr r14, r19; mr r15, r19; mr r16, r19;"
 		      "mr r17, r19; mr r18, r19;"
 		      "lswi r11, %[addr], %[len];"
 		      "std r11, 0*8(%[regs]);"
 		      "std r12, 1*8(%[regs]);"
 		      "std r13, 2*8(%[regs]);"
 		      "std r14, 3*8(%[regs]);"
 		      "std r15, 4*8(%[regs]);"
 		      "std r16, 5*8(%[regs]);"
 		      "std r17, 6*8(%[regs]);"
 		      "std r18, 7*8(%[regs]);"
 		      "std r19, 8*8(%[regs]);"
 		      ::
 		      [len] "i" (0),
 		      [addr] "b" (addr),
 		      [regs] "r" (regs)
 		      :
 		      /* as 32 is the number of bytes,
 		       * we should modify 32/4 = 8 regs, from r11 to r18
 		       * We check r19 is unmodified by filling it with 1s
 		       * before the instruction.
 		       */
 		      "r11", "r12", "r13", "r14", "r15", "r16", "r17",
 		      "r18", "r19", "memory");

 	report(regs[0] == 0x01020304 && regs[1] == 0x05060708 &&
 	       regs[2] == 0x090a0b0c && regs[3] == 0x0d0e0f10 &&
 	       regs[4] == 0x11121314 && regs[5] == 0x15161718 &&
 	       regs[6] == 0x191a1b1c && regs[7] == 0x1d1e1f20 &&
 	       regs[8] == (uint64_t)-1, "length");

 	/* check wrap around to r0 */
 	asm volatile ("li r31,-1;"
 		      "mr r0, r31;"
 		      "lswi r31, %[addr], %[len];"
 		      "std r31, 0*8(%[regs]);"
 		      "std r0, 1*8(%[regs]);"
 		      ::
 		      [len] "i" (8),
 		      [addr] "b" (addr),
 		      [regs] "r" (regs)
 		      :
 		      /* modify two registers from r31, wrap around to r0 */
 		      "r31", "r0", "memory");

 	report(regs[0] == 0x01020304 && regs[1] == 0x05060708,
 	       "wrap around to r0");

 	/* check wrap around doesn't break RA */
 	asm volatile ("mr r29,r1\n"
 		      "li r31,-1\n"
 		      "mr r0,r31\n"
 		      "mr r1, %[addr]\n"
 		      ".long 0x7fe154aa\n"       /* lswi r31, r1, 10 */
 		      "std r31, 0*8(%[regs])\n"
 		      "std r0, 1*8(%[regs])\n"
 		      "std r1, 2*8(%[regs])\n"
 		      "mr r1,r29\n"
 		      ::
 		      [addr] "r" (addr),
 		      [regs] "r" (regs)
 		      :
 		      /* loading three registers from r31 wraps around to r1,
 		       * r1 is saved to r29, as adding it to the clobber
 		       * list doesn't protect it
 		       */
 		      "r0", "r29", "r31", "memory");

 	/* doc says it is invalid, real proc stops when it comes to
 	 * overwrite the register.
 	 * In all the cases, the register must stay untouched
 	 */
 	report(regs[2] == (uint64_t)addr, "Don't overwrite Ra");

 #endif

 	report_prefix_pop();
 }

 /*
  * lswx: Load String Word Indexed X-form
  *
  *     lswx RT,RA,RB
  *
  * EA = (RA|0) + RB
  * n  = XER
  *
  * Load n bytes from address EA into (n / 4) consecutive registers,
  * throught RT -> RT + (n / 4) - 1.
  * - Data are loaded into 4 low order bytes of registers (Word).
  * - The unfilled bytes are set to 0.
  * - The sequence of registers wraps around to GPR0.
  * - if n == 0, content of RT is undefined
  * - RT <= RA or RB < RT + (n + 4) is invalid or result is undefined
  * - RT == RA == 0 is invalid
  *
  * For lswx in little-endian mode, an alignment interrupt always occurs.
  *
  */

 static void test_lswx(void)
 {
 	int i;
 	char addr[128];
 	uint64_t regs[32];

 	report_prefix_push("lswx");

 	/* fill memory with sequence */
 	for (i = 0; i < 128; i++)
 		addr[i] = 1 + i;

 #if  __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__

 	/*
 	 * lswx is supposed to cause an alignment exception in little endian
 	 * mode, but to be able to check this, we also have to specify the
 	 * opcode without mnemonic here since newer versions of GCC refuse
 	 * "lswx" when compiling in little endian mode.
 	 */
 	alignment = 0;
 	asm volatile ("mtxer %[len];"
 		      "mr r11,%[addr];"
 		      ".long 0x7d805c2a;"       /* lswx r12,0,r11 */
 		      "std r12,0(%[regs]);"
 		      :: [len]"r"(4), [addr]"r"(addr), [regs]"r"(regs)
 		      : "r11", "r12", "memory");
 	report(alignment, "alignment");

 #else

 	/* check incomplete register filling */
 	asm volatile ("mtxer %[len];"
 		      "li r12,-1;"
 		      "mr r11, r12;"
 		      "lswx r11, 0, %[addr];"
 		      "std r11, 0*8(%[regs]);"
 		      "std r12, 1*8(%[regs]);"
 		      ::
 		      [len] "r" (3),
 		      [addr] "r" (addr),
 		      [regs] "r" (regs)
 		      :
 		      "xer", "r11", "r12", "memory");
 	report(regs[0] == 0x01020300 && regs[1] == (uint64_t)-1, "partial");

 	/* check an old know bug: the number of bytes is used as
 	 * the number of registers, so try 32 bytes.
 	 */

 	asm volatile ("mtxer %[len];"
 		      "li r19,-1;"
 		      "mr r11, r19; mr r12, r19; mr r13, r19;"
 		      "mr r14, r19; mr r15, r19; mr r16, r19;"
 		      "mr r17, r19; mr r18, r19;"
 		      "lswx r11, 0, %[addr];"
 		      "std r11, 0*8(%[regs]);"
 		      "std r12, 1*8(%[regs]);"
 		      "std r13, 2*8(%[regs]);"
 		      "std r14, 3*8(%[regs]);"
 		      "std r15, 4*8(%[regs]);"
 		      "std r16, 5*8(%[regs]);"
 		      "std r17, 6*8(%[regs]);"
 		      "std r18, 7*8(%[regs]);"
 		      "std r19, 8*8(%[regs]);"
 		      ::
 		      [len] "r" (32),
 		      [addr] "r" (addr),
 		      [regs] "r" (regs)
 		      :
 		      /* as 32 is the number of bytes,
 		       * we should modify 32/4 = 8 regs, from r11 to r18
 		       * We check r19 is unmodified by filling it with 1s
 		       * before the instruction.
 		       */
 		      "xer", "r11", "r12", "r13", "r14", "r15", "r16", "r17",
 		      "r18", "r19", "memory");

 	report(regs[0] == 0x01020304 && regs[1] == 0x05060708 &&
 	       regs[2] == 0x090a0b0c && regs[3] == 0x0d0e0f10 &&
 	       regs[4] == 0x11121314 && regs[5] == 0x15161718 &&
 	       regs[6] == 0x191a1b1c && regs[7] == 0x1d1e1f20 &&
 	       regs[8] == (uint64_t)-1, "length");

 	/* check wrap around to r0 */

 	asm volatile ("mtxer %[len];"
 		      "li r31,-1;"
 		      "mr r0, r31;"
 		      "lswx r31, 0, %[addr];"
 		      "std r31, 0*8(%[regs]);"
 		      "std r0, 1*8(%[regs]);"
 		      ::
 		      [len] "r" (8),
 		      [addr] "r" (addr),
 		      [regs] "r" (regs)
 		      :
 		      /* modify two registers from r31, wrap around to r0 */
 		      "xer", "r31", "r0", "memory");

 	report(regs[0] == 0x01020304 && regs[1] == 0x05060708,
 	       "wrap around to r0");

 	/* check wrap around to r0 over RB doesn't break RB */

 	asm volatile ("mtxer %[len];"
 		      "mr r29,r1;"
 		      "li r31,-1;"
 		      "mr r1,r31;"
 		      "mr r0, %[addr];"
 		      "lswx r31, 0, r0;"
 		      "std r31, 0*8(%[regs]);"
 		      "std r0, 1*8(%[regs]);"
 		      "std r1, 2*8(%[regs]);"
 		      "mr r1,r29;"
 		      ::
 		      [len] "r" (12),
 		      [addr] "r" (addr),
 		      [regs] "r" (regs)
 		      :
 		      /* loading three registers from r31 wraps around to r1,
 		       * r1 is saved to r29, as adding it to the clobber
 		       * list doesn't protect it
 		       */
 		      "xer", "r31", "r0", "r29", "memory");

 	/* doc says it is invalid, real proc stops when it comes to
 	 * overwrite the register.
 	 * In all the cases, the register must stay untouched
 	 */
 	report(regs[1] == (uint64_t)addr, "Don't overwrite Rb");

 #endif

 	report_prefix_pop();
 }

 int main(int argc, char **argv)
 {
 	int i;

 	handle_exception(0x700, program_check_handler, (void *)&is_invalid);
 	handle_exception(0x600, alignment_handler, (void *)&alignment);

 	for (i = 1; i < argc; i++) {
 		if (strcmp(argv[i], "-v") == 0) {
 			verbose = 1;
 		}
 	}

 	report_prefix_push("emulator");

 	test_64bit();
 	test_illegal();
 	test_lswx();
 	test_lswi();

 	report_prefix_pop();

 	return report_summary();
 }
	/*
	* Test some powerpc instructions
	*/

	#include <libcflat.h>
	#include <asm/processor.h>

	static int verbose;
	static int volatile is_invalid;
	static int volatile alignment;

	static void program_check_handler(struct pt_regs regs, void opaque)
	{
	int *data = opaque;

	if (verbose) {
	printf("Detected invalid instruction %#018lx: %08x\n",
	regs->nip, (uint32_t)regs->nip);
	}

	/* the result is bit 16 to 19 of SRR1
	* bit 0: SRR0 contains the address of the next instruction
	* bit 1: Trap
	* bit 2: Privileged instruction
	* bit 3: Illegal instruction
	* bit 4: FP enabled exception type
	*/

	*data = regs->msr >> 16;

	regs->nip += 4;
	}

	static void alignment_handler(struct pt_regs regs, void opaque)
	{
	int *data = opaque;

	if (verbose) {
	printf("Detected alignment exception %#018lx: %08x\n",
	regs->nip, (uint32_t)regs->nip);
	}

	*data = 1;

	regs->nip += 4;
	}

	static void test_illegal(void)
	{
	report_prefix_push("invalid");

	is_invalid = 0;

	asm volatile (".long 0");

	report(is_invalid == 8, "exception"); /* illegal instruction */

	report_prefix_pop();
	}

	static void test_64bit(void)
	{
	uint64_t msr;

	report_prefix_push("64bit");

	asm("mfmsr %[msr]": [msr] "=r" (msr));

	report(msr & 0x8000000000000000UL, "detected");

	report_prefix_pop();
	}

	/**
	* Test 'Load String Word Immediate' instruction
	*/
	static void test_lswi(void)
	{
	int i;
	char addr[128];
	uint64_t regs[32];

	report_prefix_push("lswi");

	/* fill memory with sequence */
	for (i = 0; i < 128; i++)
	addr[i] = 1 + i;

	#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__

	/*
	* lswi is supposed to cause an alignment exception in little endian
	* mode, but to be able to check this, we also have to specify the
	* opcode without mnemonic here since newer versions of GCC refuse
	* "lswi" when compiling in little endian mode.
	*/
	alignment = 0;
	asm volatile ("mr r12,%[addr];"
	".long 0x7d6c24aa;" /* lswi r11,r12,4 */
	"std r11,0(%[regs]);"
	:: [addr] "r" (addr), [regs] "r" (regs)
	: "r11", "r12", "memory");
	report(alignment, "alignment");

	#else

	/* check incomplete register filling */
	asm volatile ("li r12,-1;"
	"mr r11, r12;"
	"lswi r11, %[addr], %[len];"
	"std r11, 0*8(%[regs]);"
	"std r12, 1*8(%[regs]);"
	::
	[len] "i" (3),
	[addr] "b" (addr),
	[regs] "r" (regs)
	:
	"r11", "r12", "memory");
	report(regs[0] == 0x01020300 && regs[1] == (uint64_t)-1, "partial");

	/* check NB = 0 ==> 32 bytes. */
	asm volatile ("li r19,-1;"
	"mr r11, r19; mr r12, r19; mr r13, r19;"
	"mr r14, r19; mr r15, r19; mr r16, r19;"
	"mr r17, r19; mr r18, r19;"
	"lswi r11, %[addr], %[len];"
	"std r11, 0*8(%[regs]);"
	"std r12, 1*8(%[regs]);"
	"std r13, 2*8(%[regs]);"
	"std r14, 3*8(%[regs]);"
	"std r15, 4*8(%[regs]);"
	"std r16, 5*8(%[regs]);"
	"std r17, 6*8(%[regs]);"
	"std r18, 7*8(%[regs]);"
	"std r19, 8*8(%[regs]);"
	::
	[len] "i" (0),
	[addr] "b" (addr),
	[regs] "r" (regs)
	:
	/* as 32 is the number of bytes,
	* we should modify 32/4 = 8 regs, from r11 to r18
	* We check r19 is unmodified by filling it with 1s
	* before the instruction.
	*/
	"r11", "r12", "r13", "r14", "r15", "r16", "r17",
	"r18", "r19", "memory");

	report(regs[0] == 0x01020304 && regs[1] == 0x05060708 &&
	regs[2] == 0x090a0b0c && regs[3] == 0x0d0e0f10 &&
	regs[4] == 0x11121314 && regs[5] == 0x15161718 &&
	regs[6] == 0x191a1b1c && regs[7] == 0x1d1e1f20 &&
	regs[8] == (uint64_t)-1, "length");

	/* check wrap around to r0 */
	asm volatile ("li r31,-1;"
	"mr r0, r31;"
	"lswi r31, %[addr], %[len];"
	"std r31, 0*8(%[regs]);"
	"std r0, 1*8(%[regs]);"
	::
	[len] "i" (8),
	[addr] "b" (addr),
	[regs] "r" (regs)
	:
	/* modify two registers from r31, wrap around to r0 */
	"r31", "r0", "memory");

	report(regs[0] == 0x01020304 && regs[1] == 0x05060708,
	"wrap around to r0");

	/* check wrap around doesn't break RA */
	asm volatile ("mr r29,r1\n"
	"li r31,-1\n"
	"mr r0,r31\n"
	"mr r1, %[addr]\n"
	".long 0x7fe154aa\n" /* lswi r31, r1, 10 */
	"std r31, 0*8(%[regs])\n"
	"std r0, 1*8(%[regs])\n"
	"std r1, 2*8(%[regs])\n"
	"mr r1,r29\n"
	::
	[addr] "r" (addr),
	[regs] "r" (regs)
	:
	/* loading three registers from r31 wraps around to r1,
	* r1 is saved to r29, as adding it to the clobber
	* list doesn't protect it
	*/
	"r0", "r29", "r31", "memory");

	/* doc says it is invalid, real proc stops when it comes to
	* overwrite the register.
	* In all the cases, the register must stay untouched
	*/
	report(regs[2] == (uint64_t)addr, "Don't overwrite Ra");

	#endif

	report_prefix_pop();
	}

	/*
	* lswx: Load String Word Indexed X-form
	*
	* lswx RT,RA,RB
	*
	* EA = (RA\|0) + RB
	* n = XER
	*
	* Load n bytes from address EA into (n / 4) consecutive registers,
	* throught RT -> RT + (n / 4) - 1.
	* - Data are loaded into 4 low order bytes of registers (Word).
	* - The unfilled bytes are set to 0.
	* - The sequence of registers wraps around to GPR0.
	* - if n == 0, content of RT is undefined
	* - RT <= RA or RB < RT + (n + 4) is invalid or result is undefined
	* - RT == RA == 0 is invalid
	*
	* For lswx in little-endian mode, an alignment interrupt always occurs.
	*
	*/

	static void test_lswx(void)
	{
	int i;
	char addr[128];
	uint64_t regs[32];

	report_prefix_push("lswx");

	/* fill memory with sequence */
	for (i = 0; i < 128; i++)
	addr[i] = 1 + i;

	#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__

	/*
	* lswx is supposed to cause an alignment exception in little endian
	* mode, but to be able to check this, we also have to specify the
	* opcode without mnemonic here since newer versions of GCC refuse
	* "lswx" when compiling in little endian mode.
	*/
	alignment = 0;
	asm volatile ("mtxer %[len];"
	"mr r11,%[addr];"
	".long 0x7d805c2a;" /* lswx r12,0,r11 */
	"std r12,0(%[regs]);"
	:: [len]"r"(4), [addr]"r"(addr), [regs]"r"(regs)
	: "r11", "r12", "memory");
	report(alignment, "alignment");

	#else

	/* check incomplete register filling */
	asm volatile ("mtxer %[len];"
	"li r12,-1;"
	"mr r11, r12;"
	"lswx r11, 0, %[addr];"
	"std r11, 0*8(%[regs]);"
	"std r12, 1*8(%[regs]);"
	::
	[len] "r" (3),
	[addr] "r" (addr),
	[regs] "r" (regs)
	:
	"xer", "r11", "r12", "memory");
	report(regs[0] == 0x01020300 && regs[1] == (uint64_t)-1, "partial");

	/* check an old know bug: the number of bytes is used as
	* the number of registers, so try 32 bytes.
	*/

	asm volatile ("mtxer %[len];"
	"li r19,-1;"
	"mr r11, r19; mr r12, r19; mr r13, r19;"
	"mr r14, r19; mr r15, r19; mr r16, r19;"
	"mr r17, r19; mr r18, r19;"
	"lswx r11, 0, %[addr];"
	"std r11, 0*8(%[regs]);"
	"std r12, 1*8(%[regs]);"
	"std r13, 2*8(%[regs]);"
	"std r14, 3*8(%[regs]);"
	"std r15, 4*8(%[regs]);"
	"std r16, 5*8(%[regs]);"
	"std r17, 6*8(%[regs]);"
	"std r18, 7*8(%[regs]);"
	"std r19, 8*8(%[regs]);"
	::
	[len] "r" (32),
	[addr] "r" (addr),
	[regs] "r" (regs)
	:
	/* as 32 is the number of bytes,
	* we should modify 32/4 = 8 regs, from r11 to r18
	* We check r19 is unmodified by filling it with 1s
	* before the instruction.
	*/
	"xer", "r11", "r12", "r13", "r14", "r15", "r16", "r17",
	"r18", "r19", "memory");

	report(regs[0] == 0x01020304 && regs[1] == 0x05060708 &&
	regs[2] == 0x090a0b0c && regs[3] == 0x0d0e0f10 &&
	regs[4] == 0x11121314 && regs[5] == 0x15161718 &&
	regs[6] == 0x191a1b1c && regs[7] == 0x1d1e1f20 &&
	regs[8] == (uint64_t)-1, "length");

	/* check wrap around to r0 */

	asm volatile ("mtxer %[len];"
	"li r31,-1;"
	"mr r0, r31;"
	"lswx r31, 0, %[addr];"
	"std r31, 0*8(%[regs]);"
	"std r0, 1*8(%[regs]);"
	::
	[len] "r" (8),
	[addr] "r" (addr),
	[regs] "r" (regs)
	:
	/* modify two registers from r31, wrap around to r0 */
	"xer", "r31", "r0", "memory");

	report(regs[0] == 0x01020304 && regs[1] == 0x05060708,
	"wrap around to r0");

	/* check wrap around to r0 over RB doesn't break RB */

	asm volatile ("mtxer %[len];"
	"mr r29,r1;"
	"li r31,-1;"
	"mr r1,r31;"
	"mr r0, %[addr];"
	"lswx r31, 0, r0;"
	"std r31, 0*8(%[regs]);"
	"std r0, 1*8(%[regs]);"
	"std r1, 2*8(%[regs]);"
	"mr r1,r29;"
	::
	[len] "r" (12),
	[addr] "r" (addr),
	[regs] "r" (regs)
	:
	/* loading three registers from r31 wraps around to r1,
	* r1 is saved to r29, as adding it to the clobber
	* list doesn't protect it
	*/
	"xer", "r31", "r0", "r29", "memory");

	/* doc says it is invalid, real proc stops when it comes to
	* overwrite the register.
	* In all the cases, the register must stay untouched
	*/
	report(regs[1] == (uint64_t)addr, "Don't overwrite Rb");

	#endif

	report_prefix_pop();
	}

	int main(int argc, char **argv)
	{
	int i;

	handle_exception(0x700, program_check_handler, (void *)&is_invalid);
	handle_exception(0x600, alignment_handler, (void *)&alignment);

	for (i = 1; i < argc; i++) {
	if (strcmp(argv[i], "-v") == 0) {
	verbose = 1;
	}
	}

	report_prefix_push("emulator");

	test_64bit();
	test_illegal();
	test_lswx();
	test_lswi();

	report_prefix_pop();

	return report_summary();
	}