| : "${RUNTIME_arch_run?}" |
| : "${MAX_SMP:=$(getconf _NPROCESSORS_ONLN)}" |
| |
| PASS() { echo -ne "\e[32mPASS\e[0m"; } |
| SKIP() { echo -ne "\e[33mSKIP\e[0m"; } |
| FAIL() { echo -ne "\e[31mFAIL\e[0m"; } |
| |
| extract_summary() |
| { |
| local cr=$'\r' |
| tail -5 | grep '^SUMMARY: ' | sed 's/^SUMMARY: /(/;s/'"$cr"'\{0,1\}$/)/' |
| } |
| |
| # We assume that QEMU is going to work if it tried to load the kernel |
| premature_failure() |
| { |
| local log |
| |
| log="$(eval "$(get_cmdline _NO_FILE_4Uhere_)" 2>&1)" |
| |
| vmm_parse_premature_failure "$log" || return 1 |
| |
| RUNTIME_log_stderr <<< "$log" |
| |
| echo "$log" |
| return 0 |
| } |
| |
| get_cmdline() |
| { |
| local kernel=$1 |
| echo "TESTNAME=$testname TIMEOUT=$timeout MACHINE=$machine ACCEL=$accel $RUNTIME_arch_run $kernel $smp $test_args $opts" |
| } |
| |
| skip_nodefault() |
| { |
| [ "$run_all_tests" = "yes" ] && return 1 |
| [ "$KUT_STANDALONE" != "yes" ] && return 0 |
| |
| while true; do |
| read -r -p "Test marked not to be run by default, are you sure (y/N)? " yn |
| case $yn in |
| "Y" | "y" | "Yes" | "yes") |
| return 1 |
| ;; |
| "" | "N" | "n" | "No" | "no" | "q" | "quit" | "exit") |
| return 0 |
| ;; |
| esac |
| done |
| } |
| |
| function print_result() |
| { |
| local status="$1" |
| local testname="$2" |
| local summary="$3" |
| local reason="$4" |
| |
| if [ -z "$reason" ]; then |
| echo "$($status) $testname $summary" |
| else |
| echo "$($status) $testname ($reason)" |
| fi |
| } |
| |
| function find_word() |
| { |
| grep -Fq " $1 " <<< " $2 " |
| } |
| |
| function run() |
| { |
| local testname="$1" |
| local groups="$2" |
| local smp="$3" |
| local kernel="$4" |
| local test_args="$5" |
| local opts="$6" |
| local arch="$7" |
| local machine="$8" |
| local check="${CHECK:-$9}" |
| local accel="${10}" |
| local timeout="${TIMEOUT:-${11:-90s}}" # TIMEOUT env var overrides unittests.cfg |
| local disabled_if="${12}" |
| |
| if [ "${CONFIG_EFI}" == "y" ]; then |
| kernel=${kernel/%.flat/.efi} |
| fi |
| |
| if [ -z "$testname" ]; then |
| return |
| fi |
| |
| if [ -n "$only_tests" ] && ! find_word "$testname" "$only_tests"; then |
| return |
| fi |
| |
| if [ -n "$only_group" ] && ! find_word "$only_group" "$groups"; then |
| return |
| fi |
| |
| if [ -z "$GEN_SE_HEADER" ] && find_word "pv-host" "$groups"; then |
| print_result "SKIP" $testname "" "no gen-se-header available for pv-host test" |
| return 2 |
| fi |
| |
| if [ -z "$only_group" ] && find_word nodefault "$groups" && |
| skip_nodefault; then |
| print_result "SKIP" $testname "" "test marked as manual run only" |
| return 2 |
| fi |
| |
| if [ -n "$arch" ] && [ "$arch" != "$ARCH" ]; then |
| print_result "SKIP" $testname "" "$arch only" |
| return 2 |
| fi |
| |
| if [ -n "$machine" ] && [ -n "$MACHINE" ] && [ "$machine" != "$MACHINE" ]; then |
| print_result "SKIP" $testname "" "$machine only" |
| return 2 |
| elif [ -n "$MACHINE" ]; then |
| machine="$MACHINE" |
| fi |
| |
| if [ -n "$accel" ] && [ -n "$ACCEL" ] && [[ ! "$ACCEL" =~ ^$accel(,|$) ]]; then |
| print_result "SKIP" $testname "" "$accel only, but ACCEL=$ACCEL" |
| return 2 |
| elif [ -n "$ACCEL" ]; then |
| accel="$ACCEL" |
| fi |
| |
| if [[ "$disabled_if" ]] && (eval $disabled_if); then |
| print_result "SKIP" $testname "" "disabled because: $disabled_if" |
| return 2 |
| fi |
| |
| # check a file for a particular value before running a test |
| # the check line can contain multiple files to check separated by a space |
| # but each check parameter needs to be of the form <path>=<value> |
| if [ "$check" ]; then |
| # There is no globbing or whitespace allowed in check parameters. |
| # shellcheck disable=SC2206 |
| check=($check) |
| for check_param in "${check[@]}"; do |
| path=${check_param%%=*} |
| value=${check_param#*=} |
| if ! [ -f "$path" ] || [ "$(cat $path)" != "$value" ]; then |
| print_result "SKIP" $testname "" "$path not equal to $value" |
| return 2 |
| fi |
| done |
| fi |
| |
| if [ ! -f "$kernel" ]; then |
| print_result "SKIP" $testname "" "Test file '$kernel' not found"; |
| return 2; |
| fi |
| |
| log=$(premature_failure) && { |
| skip=true |
| if [ "${CONFIG_EFI}" == "y" ]; then |
| if [ "$ARCH" == "x86_64" ] && |
| [[ "$(tail -1 <<<"$log")" =~ "Dummy Hello World!" ]]; then |
| skip=false |
| elif [ "$ARCH" == "arm64" ] && |
| [[ "$(tail -2 <<<"$log" | head -1)" =~ "Dummy Hello World!" ]]; then |
| skip=false |
| fi |
| fi |
| |
| if [ ${skip} == true ]; then |
| print_result "SKIP" $testname "" "$(tail -1 <<<"$log")" |
| return 77 |
| fi |
| } |
| |
| cmdline=$(get_cmdline $kernel) |
| if find_word "migration" "$groups"; then |
| cmdline="MIGRATION=yes $cmdline" |
| fi |
| if find_word "panic" "$groups"; then |
| cmdline="PANIC=yes $cmdline" |
| fi |
| if [ "$verbose" = "yes" ]; then |
| echo $cmdline |
| fi |
| |
| # qemu_params/extra_params in the config file may contain backticks that |
| # need to be expanded, so use eval to start qemu. Use "> >(foo)" instead of |
| # a pipe to preserve the exit status. |
| # |
| # SC complains that redirection without tee takes output away from command |
| # substitution, but that is what we want here (tee is used inside the |
| # parenthesis and output piped to extract_summary which is captured by |
| # command substitution). |
| # shellcheck disable=SC2327,SC2328 |
| summary=$(eval "$cmdline" 2> >(RUNTIME_log_stderr $testname) \ |
| > >(tee >(RUNTIME_log_stdout $testname $kernel) | extract_summary)) |
| ret=$? |
| [ "$KUT_STANDALONE" != "yes" ] && echo > >(RUNTIME_log_stdout $testname $kernel) |
| |
| if [ $ret -eq 0 ]; then |
| print_result "PASS" $testname "$summary" |
| elif [ $ret -eq 77 ]; then |
| print_result "SKIP" $testname "$summary" |
| elif [ $ret -eq 124 ]; then |
| print_result "FAIL" $testname "" "timeout; duration=$timeout" |
| if [ "$tap_output" = "yes" ]; then |
| echo "not ok TEST_NUMBER - ${testname}: timeout; duration=$timeout" >&3 |
| fi |
| elif [ $ret -gt 127 ]; then |
| signame="SIG"$(kill -l $(($ret - 128))) |
| print_result "FAIL" $testname "" "terminated on $signame" |
| if [ "$tap_output" = "yes" ]; then |
| echo "not ok TEST_NUMBER - ${testname}: terminated on $signame" >&3 |
| fi |
| elif [ $ret -eq 127 ] && [ "$tap_output" = "yes" ]; then |
| echo "not ok TEST_NUMBER - ${testname}: aborted" >&3 |
| else |
| print_result "FAIL" $testname "$summary" |
| fi |
| |
| return $ret |
| } |
