| #!/usr/bin/env bash |
| |
| if [ -z "${BASH_VERSINFO[0]}" ] || [ "${BASH_VERSINFO[0]}" -lt 4 ] ; then |
| echo "Error: Bash version 4 or newer is required for the kvm-unit-tests" |
| exit 1 |
| fi |
| |
| srcdir=$(cd "$(dirname "$0")"; pwd) |
| prefix=/usr/local |
| cc=gcc |
| cflags= |
| ld=ld |
| objcopy=objcopy |
| objdump=objdump |
| readelf=readelf |
| ar=ar |
| addr2line=addr2line |
| arch=$(uname -m | sed -e 's/i.86/i386/;s/arm64/aarch64/;s/arm.*/arm/;s/ppc64.*/ppc64/') |
| host=$arch |
| cross_prefix= |
| endian="" |
| pretty_print_stacks=yes |
| environ_default=yes |
| u32_long= |
| wa_divide= |
| target= |
| errata_force=0 |
| erratatxt="$srcdir/errata.txt" |
| host_key_document= |
| gen_se_header= |
| enable_dump=no |
| page_size= |
| earlycon= |
| efi= |
| efi_direct= |
| |
| # Enable -Werror by default for git repositories only (i.e. developer builds) |
| if [ -e "$srcdir"/.git ]; then |
| werror=-Werror |
| else |
| werror= |
| fi |
| |
| usage() { |
| cat <<-EOF |
| Usage: $0 [options] |
| |
| Options include: |
| --arch=ARCH architecture to compile for ($arch). ARCH can be one of: |
| arm, arm64, i386, ppc64, riscv32, riscv64, s390x, x86_64 |
| --processor=PROCESSOR processor to compile for ($arch) |
| --target=TARGET target platform that the tests will be running on (qemu or |
| kvmtool, default is qemu) (arm/arm64 only) |
| --cross-prefix=PREFIX cross compiler prefix |
| --cc=CC c compiler to use ($cc) |
| --cflags=FLAGS extra options to be passed to the c compiler |
| --ld=LD ld linker to use ($ld) |
| --prefix=PREFIX where to install things ($prefix) |
| --endian=ENDIAN endianness to compile for (little or big, ppc64 only) |
| --[enable|disable]-pretty-print-stacks |
| enable or disable pretty stack printing (enabled by default) |
| --[enable|disable]-default-environ |
| enable or disable the generation of a default environ when |
| no environ is provided by the user (enabled by default) |
| --erratatxt=FILE specify a file to use instead of errata.txt. Use |
| '--erratatxt=' to ensure no file is used. |
| --host-key-document=HOST_KEY_DOCUMENT |
| Specify the machine-specific host-key document for creating |
| a PVM image with 'genprotimg' (s390x only) |
| --gen-se-header=GEN_SE_HEADER |
| Provide an executable to generate a PV header |
| requires --host-key-document. (s390x-snippets only) |
| --[enable|disable]-dump |
| Allow PV guests to be dumped. Requires at least z16. |
| (s390x only) |
| --page-size=PAGE_SIZE |
| Specify the page size (translation granule). PAGE_SIZE can be |
| 4k [default], 16k, 64k for arm64. |
| 4k [default], 64k for ppc64. |
| --earlycon=EARLYCON |
| Specify the UART name, type and address (optional, arm and |
| arm64 only). The specified address will overwrite the UART |
| address set by the --target option. EARLYCON can be one of |
| (case sensitive): |
| uart[8250],mmio,ADDR |
| Specify an 8250 compatible UART at address ADDR. Supported |
| register stride is 8 bit only. |
| pl011,ADDR |
| pl011,mmio32,ADDR |
| Specify a PL011 compatible UART at address ADDR. Supported |
| register stride is 32 bit only. |
| --[enable|disable]-efi Boot and run from UEFI (disabled by default, x86_64 and arm64 only) |
| --[enable|disable]-werror |
| Select whether to compile with the -Werror compiler flag |
| --[enable|disable]-efi-direct |
| Select whether to run EFI tests directly with QEMU's -kernel |
| option. When not enabled, tests will be placed in an EFI file |
| system and run from the UEFI shell. Ignored when efi isn't enabled |
| and defaults to enabled when efi is enabled for riscv64. |
| (arm64 and riscv64 only) |
| EOF |
| exit 1 |
| } |
| |
| optno=1 |
| argc=$# |
| while [[ $optno -le $argc ]]; do |
| opt="$1"; shift |
| optno=$(( $optno + 1 )) |
| arg= |
| if [[ "$opt" = *=* ]]; then |
| arg="${opt#*=}" |
| opt="${opt%%=*}" |
| fi |
| case "$opt" in |
| --prefix) |
| prefix="$arg" |
| ;; |
| --arch) |
| arch="$arg" |
| ;; |
| --processor) |
| processor="$arg" |
| ;; |
| --target) |
| target="$arg" |
| ;; |
| --cross-prefix) |
| cross_prefix="$arg" |
| ;; |
| --endian) |
| endian="$arg" |
| ;; |
| --cc) |
| cc="$arg" |
| ;; |
| --cflags) |
| cflags="$arg" |
| ;; |
| --ld) |
| ld="$arg" |
| ;; |
| --enable-pretty-print-stacks) |
| pretty_print_stacks=yes |
| ;; |
| --disable-pretty-print-stacks) |
| pretty_print_stacks=no |
| ;; |
| --enable-default-environ) |
| environ_default=yes |
| ;; |
| --disable-default-environ) |
| environ_default=no |
| ;; |
| --erratatxt) |
| erratatxt= |
| [ "$arg" ] && erratatxt=$(eval realpath "$arg") |
| ;; |
| --host-key-document) |
| host_key_document="$arg" |
| ;; |
| --gen-se-header) |
| gen_se_header="$arg" |
| ;; |
| --enable-dump) |
| enable_dump=yes |
| ;; |
| --disable-dump) |
| enable_dump=no |
| ;; |
| --page-size) |
| page_size="$arg" |
| ;; |
| --earlycon) |
| earlycon="$arg" |
| ;; |
| --enable-efi) |
| efi=y |
| ;; |
| --disable-efi) |
| efi=n |
| ;; |
| --enable-efi-direct) |
| efi_direct=y |
| ;; |
| --disable-efi-direct) |
| efi_direct=n |
| ;; |
| --enable-werror) |
| werror=-Werror |
| ;; |
| --disable-werror) |
| werror= |
| ;; |
| --help) |
| usage |
| ;; |
| *) |
| echo "Unknown option '$opt'" |
| echo |
| usage |
| ;; |
| esac |
| done |
| |
| if [ -z "$efi" ] || [ "$efi" = "n" ]; then |
| [ "$efi_direct" = "y" ] && efi_direct= |
| fi |
| |
| if [ -n "$host_key_document" ] && [ ! -f "$host_key_document" ]; then |
| echo "Host key document doesn't exist at the specified location." |
| exit 1 |
| fi |
| |
| if [ "$erratatxt" ] && [ ! -f "$erratatxt" ]; then |
| echo "erratatxt: $erratatxt does not exist or is not a regular file" |
| exit 1 |
| fi |
| |
| arch_name=$arch |
| [ "$arch" = "aarch64" ] && arch="arm64" |
| [ "$arch_name" = "arm64" ] && arch_name="aarch64" |
| arch_libdir=$arch |
| |
| if [ "$arch" = "riscv" ]; then |
| echo "riscv32 or riscv64 must be specified" |
| exit 1 |
| fi |
| |
| if [ -z "$target" ]; then |
| target="qemu" |
| else |
| if [ "$arch" != "arm64" ] && [ "$arch" != "arm" ]; then |
| echo "--target is not supported for $arch" |
| usage |
| fi |
| fi |
| |
| if [ "$efi" ] && [ "$arch" != "x86_64" ] && |
| [ "$arch" != "arm64" ] && [ "$arch" != "riscv64" ]; then |
| echo "--[enable|disable]-efi is not supported for $arch" |
| usage |
| fi |
| |
| if [ "$efi" ] && [ "$arch" = "riscv64" ] && [ -z "$efi_direct" ]; then |
| efi_direct=y |
| fi |
| |
| if [ -z "$page_size" ]; then |
| if [ "$arch" = "arm" ] || [ "$arch" = "arm64" ]; then |
| page_size="4096" |
| elif [ "$arch" = "ppc64" ]; then |
| page_size="65536" |
| fi |
| else |
| if [ "${page_size: -1}" = "K" ] || [ "${page_size: -1}" = "k" ]; then |
| page_size=$(( ${page_size%?} * 1024 )) |
| fi |
| |
| if [ "$arch" = "arm64" ]; then |
| if [ "$page_size" != "4096" ] && [ "$page_size" != "16384" ] && |
| [ "$page_size" != "65536" ]; then |
| echo "arm64 doesn't support page size of $page_size" |
| usage |
| fi |
| if [ "$efi" = 'y' ] && [ "$page_size" != "4096" ]; then |
| echo "efi must use 4K pages" |
| exit 1 |
| fi |
| elif [ "$arch" = "ppc64" ]; then |
| if [ "$page_size" != "4096" ] && [ "$page_size" != "65536" ]; then |
| echo "ppc64 doesn't support page size of $page_size" |
| usage |
| fi |
| else |
| echo "--page-size is not supported for $arch" |
| usage |
| fi |
| fi |
| |
| [ -z "$processor" ] && processor="$arch" |
| |
| if [ "$processor" = "arm64" ]; then |
| processor="cortex-a57" |
| elif [ "$processor" = "arm" ]; then |
| processor="cortex-a15" |
| fi |
| |
| if [ "$arch" = "i386" ] || [ "$arch" = "x86_64" ]; then |
| testdir=x86 |
| elif [ "$arch" = "arm" ] || [ "$arch" = "arm64" ]; then |
| testdir=arm |
| if [ "$target" = "qemu" ]; then |
| arm_uart_early_addr=0x09000000 |
| elif [ "$target" = "kvmtool" ]; then |
| arm_uart_early_addr=0x1000000 |
| errata_force=1 |
| else |
| echo "--target must be one of 'qemu' or 'kvmtool'!" |
| usage |
| fi |
| |
| if [ "$earlycon" ]; then |
| IFS=, read -r name type_addr addr <<<"$earlycon" |
| if [ "$name" != "uart" ] && [ "$name" != "uart8250" ] && |
| [ "$name" != "pl011" ]; then |
| echo "unknown earlycon name: $name" |
| usage |
| fi |
| |
| if [ "$name" = "pl011" ]; then |
| if [ -z "$addr" ]; then |
| addr=$type_addr |
| else |
| if [ "$type_addr" != "mmio32" ]; then |
| echo "unknown $name earlycon type: $type_addr" |
| usage |
| fi |
| fi |
| else |
| if [ "$type_addr" != "mmio" ]; then |
| echo "unknown $name earlycon type: $type_addr" |
| usage |
| fi |
| fi |
| |
| if [ -z "$addr" ]; then |
| echo "missing $name earlycon address" |
| usage |
| fi |
| if [[ $addr =~ ^0(x|X)[0-9a-fA-F]+$ ]] || |
| [[ $addr =~ ^[0-9]+$ ]]; then |
| arm_uart_early_addr=$addr |
| else |
| echo "invalid $name earlycon address: $addr" |
| usage |
| fi |
| fi |
| elif [ "$arch" = "ppc64" ]; then |
| testdir=powerpc |
| firmware="$testdir/boot_rom.bin" |
| if [ "$endian" != "little" ] && [ "$endian" != "big" ]; then |
| echo "You must provide endianness (big or little)!" |
| usage |
| fi |
| elif [ "$arch" = "riscv32" ] || [ "$arch" = "riscv64" ]; then |
| testdir=riscv |
| arch_libdir=riscv |
| elif [ "$arch" = "s390x" ]; then |
| testdir=s390x |
| else |
| echo "arch $arch is not supported!" |
| arch= |
| usage |
| fi |
| if [ ! -d "$srcdir/$testdir" ]; then |
| echo "$srcdir/$testdir does not exist!" |
| exit 1 |
| fi |
| |
| if [ "$efi" = "y" ] && [ -f "$srcdir/$testdir/efi/run" ]; then |
| ln -fs "$srcdir/$testdir/efi/run" $testdir-run |
| elif [ -f "$srcdir/$testdir/run" ]; then |
| ln -fs "$srcdir/$testdir/run" $testdir-run |
| fi |
| |
| testsubdir=$testdir |
| if [ "$efi" = "y" ]; then |
| testsubdir=$testdir/efi |
| fi |
| |
| # check if uint32_t needs a long format modifier |
| cat << EOF > lib-test.c |
| __UINT32_TYPE__ |
| EOF |
| u32_long=$("$cross_prefix$cc" -E lib-test.c | grep -v '^#' | grep -q long && echo yes) |
| rm -f lib-test.c |
| |
| # check if slash can be used for division |
| if [ "$arch" = "i386" ] || [ "$arch" = "x86_64" ]; then |
| cat << EOF > lib-test.S |
| foo: |
| movl (8 / 2), %eax |
| EOF |
| wa_divide=$("$cross_prefix$cc" -c lib-test.S >/dev/null 2>&1 || echo yes) |
| rm -f lib-test.{o,S} |
| fi |
| |
| # warn if enhanced getopt is unavailable |
| getopt -T > /dev/null |
| if [ $? -ne 4 ]; then |
| echo "Without enhanced getopt you won't be able to use run_tests.sh." |
| echo "Add it to your PATH?" |
| fi |
| |
| # Are we in a separate build tree? If so, link the Makefile |
| # and shared stuff so that 'make' and run_tests.sh work. |
| if test ! -e Makefile; then |
| echo "linking Makefile..." |
| ln -s "$srcdir/Makefile" . |
| |
| echo "linking tests..." |
| mkdir -p $testsubdir |
| ln -sf "$srcdir/$testdir/run" $testdir/ |
| if test "$testdir" != "$testsubdir"; then |
| ln -sf "$srcdir/$testsubdir/run" $testsubdir/ |
| fi |
| ln -sf "$srcdir/$testdir/unittests.cfg" $testdir/ |
| ln -sf "$srcdir/run_tests.sh" |
| |
| if [ -d "$srcdir/$testdir/snippets" ]; then |
| mkdir -p "$testdir/snippets/c" |
| fi |
| |
| echo "linking scripts..." |
| ln -sf "$srcdir/scripts" |
| fi |
| |
| # link lib/asm for the architecture |
| rm -f lib/asm |
| asm="asm-generic" |
| if [ -d "$srcdir/lib/$arch/asm" ]; then |
| asm="$srcdir/lib/$arch/asm" |
| mkdir -p "lib/$arch" |
| elif [ -d "$srcdir/lib/$arch_libdir/asm" ]; then |
| asm="$srcdir/lib/$arch_libdir/asm" |
| mkdir -p "lib/$arch_libdir" |
| elif [ -d "$srcdir/lib/$testdir/asm" ]; then |
| asm="$srcdir/lib/$testdir/asm" |
| mkdir -p "lib/$testdir" |
| fi |
| ln -sf "$asm" lib/asm |
| mkdir -p lib/generated lib/libfdt |
| |
| # create the config |
| cat <<EOF > config.mak |
| # Shellcheck does not see these are used |
| # shellcheck disable=SC2034 |
| # Shellcheck can give pointless quoting warnings for some commands |
| # shellcheck disable=SC2209 |
| SRCDIR=$srcdir |
| PREFIX=$prefix |
| HOST=$host |
| ARCH=$arch |
| ARCH_NAME=$arch_name |
| ARCH_LIBDIR=$arch_libdir |
| PROCESSOR=$processor |
| CC=$cross_prefix$cc |
| CFLAGS=$cflags |
| LD=$cross_prefix$ld |
| OBJCOPY=$cross_prefix$objcopy |
| OBJDUMP=$cross_prefix$objdump |
| READELF=$cross_prefix$readelf |
| AR=$cross_prefix$ar |
| ADDR2LINE=$cross_prefix$addr2line |
| TEST_DIR=$testdir |
| TEST_SUBDIR=$testsubdir |
| FIRMWARE=$firmware |
| ENDIAN=$endian |
| PRETTY_PRINT_STACKS=$pretty_print_stacks |
| ENVIRON_DEFAULT=$environ_default |
| ERRATATXT=$erratatxt |
| U32_LONG_FMT=$u32_long |
| WA_DIVIDE=$wa_divide |
| GENPROTIMG=${GENPROTIMG-genprotimg} |
| HOST_KEY_DOCUMENT=$host_key_document |
| CONFIG_DUMP=$enable_dump |
| CONFIG_EFI=$efi |
| EFI_DIRECT=$efi_direct |
| CONFIG_WERROR=$werror |
| GEN_SE_HEADER=$gen_se_header |
| EOF |
| if [ "$arch" = "arm" ] || [ "$arch" = "arm64" ]; then |
| echo "TARGET=$target" >> config.mak |
| fi |
| |
| cat <<EOF > lib/config.h |
| #ifndef _CONFIG_H_ |
| #define _CONFIG_H_ |
| /* |
| * Generated file. DO NOT MODIFY. |
| * |
| */ |
| |
| EOF |
| if [ "$arch" = "arm" ] || [ "$arch" = "arm64" ]; then |
| cat <<EOF >> lib/config.h |
| |
| #define CONFIG_UART_EARLY_BASE ${arm_uart_early_addr} |
| #define CONFIG_ERRATA_FORCE ${errata_force} |
| |
| EOF |
| fi |
| |
| if [ "$arch" = "arm" ] || [ "$arch" = "arm64" ] || [ "$arch" = "ppc64" ]; then |
| cat <<EOF >> lib/config.h |
| |
| #define CONFIG_PAGE_SIZE _AC(${page_size}, UL) |
| |
| EOF |
| elif [ "$arch" = "riscv32" ] || [ "$arch" = "riscv64" ]; then |
| cat <<EOF >> lib/config.h |
| |
| #define CONFIG_UART_EARLY_BASE 0x10000000 |
| |
| EOF |
| fi |
| echo "#endif" >> lib/config.h |
