| /* SPDX-License-Identifier: GPL-2.0-only */ | |
| /* | |
| * Tests vector instruction support | |
| * | |
| * Copyright 2018 IBM Corp. | |
| * | |
| * Authors: | |
| * Janosch Frank <frankja@linux.ibm.com> | |
| */ | |
| #include <libcflat.h> | |
| #include <asm/page.h> | |
| #include <asm/facility.h> | |
| #include <asm/interrupt.h> | |
| #include <asm-generic/barrier.h> | |
| static uint8_t pagebuf[PAGE_SIZE] __attribute__((aligned(PAGE_SIZE))); | |
| /* Fills all vector registers with data from addr */ | |
| static inline void vlm_all(unsigned long *addr) | |
| { | |
| asm volatile(" .machine z13\n" | |
| " vlm 0, 15, %[a]\n" | |
| : : [a] "Q" (*addr) | |
| : "v0", "v1", "v2", "v3", "v4", "v5", "v6", "v7", "v8", | |
| "v9", "v10", "v11", "v12", "v13", "v14", "v15"); | |
| asm volatile(" .machine z13\n" | |
| " vlm 16, 31, %[a]\n" | |
| : : [a] "Q" (*(addr+256/8)) | |
| : "v16", "v17", "v18", "v19", "v20", "v21", "v22", | |
| "v23", "v24", "v25", "v26", "v27", "v28", "v29", | |
| "v30", "v31"); | |
| } | |
| static void test_add(void) | |
| { | |
| static struct prm { | |
| __uint128_t a,b,c; | |
| } prm __attribute__((aligned(16))); | |
| prm.a = prm.b = prm.c = 21; | |
| asm volatile(" .machine z13\n" | |
| " vl 0, %[v1]\n" | |
| " vl 1, %[v2]\n" | |
| " va 2, 0, 1, 4\n" | |
| " vst 2, %[v3]\n" | |
| : [v3] "=Q" (prm.c) | |
| : [v1] "Q" (prm.a), [v2] "Q" (prm.b) | |
| : "v0", "v1", "v2", "memory"); | |
| report(prm.c == 42, "adding 21"); | |
| } | |
| /* z14 vector extension test */ | |
| static void test_ext1_nand(void) | |
| { | |
| bool has_vext = test_facility(135); | |
| static struct prm { | |
| __uint128_t a,b,c; | |
| } prm __attribute__((aligned(16))); | |
| if (!has_vext) { | |
| report_skip("Vector extensions 1 is not available"); | |
| return; | |
| } | |
| memset(&prm, 0xff, sizeof(prm)); | |
| asm volatile(" .machine z13\n" | |
| " vl 0, %[v1]\n" | |
| " vl 1, %[v2]\n" | |
| " .byte 0xe7, 0x20, 0x10, 0x00, 0x00, 0x6e\n" /* vnn */ | |
| " vst 2, %[v3]\n" | |
| : [v3] "=Q" (prm.c) | |
| : [v1] "Q" (prm.a), [v2] "Q" (prm.b) | |
| : "v0", "v1", "v2", "memory"); | |
| report(!prm.c, "nand ff"); | |
| } | |
| /* z14 bcd extension test */ | |
| static void test_bcd_add(void) | |
| { | |
| bool has_bcd = test_facility(134); | |
| static struct prm { | |
| __uint128_t a,b,c; | |
| } prm __attribute__((aligned(16))); | |
| if (!has_bcd) { | |
| report_skip("Vector BCD extensions is not available"); | |
| return; | |
| } | |
| prm.c = 0; | |
| prm.a = prm.b = 0b001000011100; | |
| asm volatile(" .machine z13\n" | |
| " vl 0, %[v1]\n" | |
| " vl 1, %[v2]\n" | |
| " .byte 0xe6, 0x20, 0x10, 0x01, 0x00, 0x71\n" /* vap */ | |
| " vst 2, %[v3]\n" | |
| : [v3] "=Q" (prm.c) | |
| : [v1] "Q" (prm.a), [v2] "Q" (prm.b) | |
| : "v0", "v1", "v2", "memory"); | |
| report(prm.c == 0x42c, "bcd add 21"); | |
| } | |
| static void init(void) | |
| { | |
| /* Enable vector instructions */ | |
| ctl_set_bit(0, CTL0_VECTOR); | |
| /* Preset vector registers to 0xff */ | |
| memset(pagebuf, 0xff, PAGE_SIZE); | |
| vlm_all((u64*)pagebuf); | |
| } | |
| int main(void) | |
| { | |
| bool has_vregs = test_facility(129); | |
| report_prefix_push("vector"); | |
| if (!has_vregs) { | |
| report_skip("Basic vector facility is not available"); | |
| goto done; | |
| } | |
| init(); | |
| test_add(); | |
| test_ext1_nand(); | |
| test_bcd_add(); | |
| done: | |
| report_prefix_pop(); | |
| return report_summary(); | |
| } |