| #include "kvm/kvm.h" |
| #include "kvm/boot-protocol.h" |
| #include "kvm/cpufeature.h" |
| #include "kvm/interrupt.h" |
| #include "kvm/mptable.h" |
| #include "kvm/util.h" |
| #include "kvm/8250-serial.h" |
| #include "kvm/virtio-console.h" |
| |
| #include <asm/bootparam.h> |
| #include <linux/kvm.h> |
| #include <linux/kernel.h> |
| |
| #include <sys/types.h> |
| #include <sys/ioctl.h> |
| #include <sys/mman.h> |
| #include <sys/stat.h> |
| #include <stdbool.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <unistd.h> |
| #include <stdio.h> |
| #include <fcntl.h> |
| |
| struct kvm_ext kvm_req_ext[] = { |
| { DEFINE_KVM_EXT(KVM_CAP_COALESCED_MMIO) }, |
| { DEFINE_KVM_EXT(KVM_CAP_SET_TSS_ADDR) }, |
| { DEFINE_KVM_EXT(KVM_CAP_PIT2) }, |
| { DEFINE_KVM_EXT(KVM_CAP_USER_MEMORY) }, |
| { DEFINE_KVM_EXT(KVM_CAP_IRQ_ROUTING) }, |
| { DEFINE_KVM_EXT(KVM_CAP_IRQCHIP) }, |
| { DEFINE_KVM_EXT(KVM_CAP_HLT) }, |
| { DEFINE_KVM_EXT(KVM_CAP_IRQ_INJECT_STATUS) }, |
| { DEFINE_KVM_EXT(KVM_CAP_EXT_CPUID) }, |
| { 0, 0 } |
| }; |
| |
| u64 kvm__arch_default_ram_address(void) |
| { |
| return 0; |
| } |
| |
| void kvm__arch_validate_cfg(struct kvm *kvm) |
| { |
| } |
| |
| bool kvm__arch_cpu_supports_vm(void) |
| { |
| struct cpuid_regs regs; |
| u32 eax_base; |
| int feature; |
| |
| regs = (struct cpuid_regs) { |
| .eax = 0x00, |
| }; |
| host_cpuid(®s); |
| |
| switch (regs.ebx) { |
| case CPUID_VENDOR_INTEL_1: |
| eax_base = 0x00; |
| feature = KVM__X86_FEATURE_VMX; |
| break; |
| |
| case CPUID_VENDOR_AMD_1: |
| eax_base = 0x80000000; |
| feature = KVM__X86_FEATURE_SVM; |
| break; |
| |
| default: |
| return false; |
| } |
| |
| regs = (struct cpuid_regs) { |
| .eax = eax_base, |
| }; |
| host_cpuid(®s); |
| |
| if (regs.eax < eax_base + 0x01) |
| return false; |
| |
| regs = (struct cpuid_regs) { |
| .eax = eax_base + 0x01 |
| }; |
| host_cpuid(®s); |
| |
| return regs.ecx & (1 << feature); |
| } |
| |
| /* |
| * Allocating RAM size bigger than 4GB requires us to leave a gap |
| * in the RAM which is used for PCI MMIO, hotplug, and unconfigured |
| * devices (see documentation of e820_setup_gap() for details). |
| * |
| * If we're required to initialize RAM bigger than 4GB, we will create |
| * a gap between 0xe0000000 and 0x100000000 in the guest virtual mem space. |
| */ |
| |
| void kvm__init_ram(struct kvm *kvm) |
| { |
| u64 phys_start, phys_size; |
| void *host_mem; |
| |
| if (kvm->ram_size < KVM_32BIT_GAP_START) { |
| /* Use a single block of RAM for 32bit RAM */ |
| |
| phys_start = 0; |
| phys_size = kvm->ram_size; |
| host_mem = kvm->ram_start; |
| |
| kvm__register_ram(kvm, phys_start, phys_size, host_mem); |
| } else { |
| /* First RAM range from zero to the PCI gap: */ |
| |
| phys_start = 0; |
| phys_size = KVM_32BIT_GAP_START; |
| host_mem = kvm->ram_start; |
| |
| kvm__register_ram(kvm, phys_start, phys_size, host_mem); |
| |
| /* Second RAM range from 4GB to the end of RAM: */ |
| |
| phys_start = KVM_32BIT_MAX_MEM_SIZE; |
| phys_size = kvm->ram_size - phys_start; |
| host_mem = kvm->ram_start + phys_start; |
| |
| kvm__register_ram(kvm, phys_start, phys_size, host_mem); |
| } |
| } |
| |
| /* Arch-specific commandline setup */ |
| void kvm__arch_set_cmdline(char *cmdline, bool video) |
| { |
| strcpy(cmdline, "noapic noacpi pci=conf1 reboot=k panic=1 i8042.direct=1 " |
| "i8042.dumbkbd=1 i8042.nopnp=1"); |
| if (video) |
| strcat(cmdline, " video=vesafb"); |
| else |
| strcat(cmdline, " earlyprintk=serial i8042.noaux=1"); |
| } |
| |
| /* Architecture-specific KVM init */ |
| void kvm__arch_init(struct kvm *kvm) |
| { |
| const char *hugetlbfs_path = kvm->cfg.hugetlbfs_path; |
| struct kvm_pit_config pit_config = { .flags = 0, }; |
| u64 ram_size = kvm->cfg.ram_size; |
| int ret; |
| |
| ret = ioctl(kvm->vm_fd, KVM_SET_TSS_ADDR, 0xfffbd000); |
| if (ret < 0) |
| die_perror("KVM_SET_TSS_ADDR ioctl"); |
| |
| if (ram_size < KVM_32BIT_GAP_START) { |
| kvm->ram_size = ram_size; |
| kvm->ram_start = mmap_anon_or_hugetlbfs(kvm, hugetlbfs_path, ram_size); |
| } else { |
| kvm->ram_start = mmap_anon_or_hugetlbfs(kvm, hugetlbfs_path, ram_size + KVM_32BIT_GAP_SIZE); |
| kvm->ram_size = ram_size + KVM_32BIT_GAP_SIZE; |
| if (kvm->ram_start != MAP_FAILED) |
| /* |
| * We mprotect the gap (see kvm__init_ram() for details) PROT_NONE so that |
| * if we accidently write to it, we will know. |
| */ |
| mprotect(kvm->ram_start + KVM_32BIT_GAP_START, KVM_32BIT_GAP_SIZE, PROT_NONE); |
| } |
| if (kvm->ram_start == MAP_FAILED) |
| die("out of memory"); |
| |
| madvise(kvm->ram_start, kvm->ram_size, MADV_MERGEABLE); |
| |
| ret = ioctl(kvm->vm_fd, KVM_CREATE_IRQCHIP); |
| if (ret < 0) |
| die_perror("KVM_CREATE_IRQCHIP ioctl"); |
| |
| ret = ioctl(kvm->vm_fd, KVM_CREATE_PIT2, &pit_config); |
| if (ret < 0) |
| die_perror("KVM_CREATE_PIT2 ioctl"); |
| } |
| |
| void kvm__arch_delete_ram(struct kvm *kvm) |
| { |
| munmap(kvm->ram_start, kvm->ram_size); |
| } |
| |
| void kvm__irq_line(struct kvm *kvm, int irq, int level) |
| { |
| struct kvm_irq_level irq_level; |
| |
| irq_level = (struct kvm_irq_level) { |
| { |
| .irq = irq, |
| }, |
| .level = level, |
| }; |
| |
| if (ioctl(kvm->vm_fd, KVM_IRQ_LINE, &irq_level) < 0) |
| die_perror("KVM_IRQ_LINE failed"); |
| } |
| |
| void kvm__irq_trigger(struct kvm *kvm, int irq) |
| { |
| kvm__irq_line(kvm, irq, 1); |
| kvm__irq_line(kvm, irq, 0); |
| } |
| |
| #define BOOT_LOADER_SELECTOR 0x1000 |
| #define BOOT_LOADER_IP 0x0000 |
| #define BOOT_LOADER_SP 0x8000 |
| #define BOOT_CMDLINE_OFFSET 0x20000 |
| |
| #define BOOT_PROTOCOL_REQUIRED 0x206 |
| #define LOAD_HIGH 0x01 |
| |
| static inline void *guest_real_to_host(struct kvm *kvm, u16 selector, u16 offset) |
| { |
| unsigned long flat = ((u32)selector << 4) + offset; |
| |
| return guest_flat_to_host(kvm, flat); |
| } |
| |
| static bool load_flat_binary(struct kvm *kvm, int fd_kernel) |
| { |
| void *p; |
| |
| if (lseek(fd_kernel, 0, SEEK_SET) < 0) |
| die_perror("lseek"); |
| |
| p = guest_real_to_host(kvm, BOOT_LOADER_SELECTOR, BOOT_LOADER_IP); |
| |
| if (read_file(fd_kernel, p, kvm->cfg.ram_size) < 0) |
| die_perror("read"); |
| |
| kvm->arch.boot_selector = BOOT_LOADER_SELECTOR; |
| kvm->arch.boot_ip = BOOT_LOADER_IP; |
| kvm->arch.boot_sp = BOOT_LOADER_SP; |
| |
| return true; |
| } |
| |
| static const char *BZIMAGE_MAGIC = "HdrS"; |
| |
| static bool load_bzimage(struct kvm *kvm, int fd_kernel, int fd_initrd, |
| const char *kernel_cmdline) |
| { |
| struct boot_params *kern_boot; |
| struct boot_params boot; |
| size_t cmdline_size; |
| ssize_t file_size; |
| void *p; |
| u16 vidmode; |
| |
| /* |
| * See Documentation/x86/boot.txt for details no bzImage on-disk and |
| * memory layout. |
| */ |
| |
| if (read_in_full(fd_kernel, &boot, sizeof(boot)) != sizeof(boot)) |
| return false; |
| |
| if (memcmp(&boot.hdr.header, BZIMAGE_MAGIC, strlen(BZIMAGE_MAGIC))) |
| return false; |
| |
| if (boot.hdr.version < BOOT_PROTOCOL_REQUIRED) |
| die("Too old kernel"); |
| |
| if (lseek(fd_kernel, 0, SEEK_SET) < 0) |
| die_perror("lseek"); |
| |
| if (!boot.hdr.setup_sects) |
| boot.hdr.setup_sects = BZ_DEFAULT_SETUP_SECTS; |
| file_size = (boot.hdr.setup_sects + 1) << 9; |
| p = guest_real_to_host(kvm, BOOT_LOADER_SELECTOR, BOOT_LOADER_IP); |
| if (read_in_full(fd_kernel, p, file_size) != file_size) |
| die_perror("kernel setup read"); |
| |
| /* read actual kernel image (vmlinux.bin) to BZ_KERNEL_START */ |
| p = guest_flat_to_host(kvm, BZ_KERNEL_START); |
| file_size = read_file(fd_kernel, p, |
| kvm->cfg.ram_size - BZ_KERNEL_START); |
| if (file_size < 0) |
| die_perror("kernel read"); |
| |
| p = guest_flat_to_host(kvm, BOOT_CMDLINE_OFFSET); |
| if (kernel_cmdline) { |
| cmdline_size = strlen(kernel_cmdline) + 1; |
| if (cmdline_size > boot.hdr.cmdline_size) |
| cmdline_size = boot.hdr.cmdline_size; |
| |
| memset(p, 0, boot.hdr.cmdline_size); |
| memcpy(p, kernel_cmdline, cmdline_size - 1); |
| } |
| |
| /* vidmode should be either specified or set by default */ |
| if (kvm->cfg.vnc || kvm->cfg.sdl || kvm->cfg.gtk) { |
| if (!kvm->cfg.arch.vidmode) |
| vidmode = 0x312; |
| else |
| vidmode = kvm->cfg.arch.vidmode; |
| } else { |
| vidmode = 0; |
| } |
| |
| kern_boot = guest_real_to_host(kvm, BOOT_LOADER_SELECTOR, 0x00); |
| |
| kern_boot->hdr.cmd_line_ptr = BOOT_CMDLINE_OFFSET; |
| kern_boot->hdr.type_of_loader = 0xff; |
| kern_boot->hdr.heap_end_ptr = 0xfe00; |
| kern_boot->hdr.loadflags |= CAN_USE_HEAP; |
| kern_boot->hdr.vid_mode = vidmode; |
| |
| /* |
| * Read initrd image into guest memory |
| */ |
| if (fd_initrd >= 0) { |
| struct stat initrd_stat; |
| unsigned long addr; |
| |
| if (fstat(fd_initrd, &initrd_stat)) |
| die_perror("fstat"); |
| |
| addr = boot.hdr.initrd_addr_max & ~0xfffff; |
| for (;;) { |
| if (addr < BZ_KERNEL_START) |
| die("Not enough memory for initrd"); |
| else if (addr < (kvm->ram_size - initrd_stat.st_size)) |
| break; |
| addr -= 0x100000; |
| } |
| |
| p = guest_flat_to_host(kvm, addr); |
| if (read_in_full(fd_initrd, p, initrd_stat.st_size) < 0) |
| die("Failed to read initrd"); |
| |
| kern_boot->hdr.ramdisk_image = addr; |
| kern_boot->hdr.ramdisk_size = initrd_stat.st_size; |
| } |
| |
| kvm->arch.boot_selector = BOOT_LOADER_SELECTOR; |
| /* |
| * The real-mode setup code starts at offset 0x200 of a bzImage. See |
| * Documentation/x86/boot.txt for details. |
| */ |
| kvm->arch.boot_ip = BOOT_LOADER_IP + 0x200; |
| kvm->arch.boot_sp = BOOT_LOADER_SP; |
| |
| return true; |
| } |
| |
| bool kvm__arch_load_kernel_image(struct kvm *kvm, int fd_kernel, int fd_initrd, |
| const char *kernel_cmdline) |
| { |
| if (load_bzimage(kvm, fd_kernel, fd_initrd, kernel_cmdline)) |
| return true; |
| pr_warning("Kernel image is not a bzImage."); |
| pr_warning("Trying to load it as a flat binary (no cmdline support)"); |
| |
| if (fd_initrd != -1) |
| pr_warning("Loading initrd with flat binary not supported."); |
| |
| return load_flat_binary(kvm, fd_kernel); |
| } |
| |
| /** |
| * kvm__arch_setup_firmware - inject BIOS into guest system memory |
| * @kvm - guest system descriptor |
| * |
| * This function is a main routine where we poke guest memory |
| * and install BIOS there. |
| */ |
| int kvm__arch_setup_firmware(struct kvm *kvm) |
| { |
| /* standart minimal configuration */ |
| setup_bios(kvm); |
| |
| /* FIXME: SMP, ACPI and friends here */ |
| |
| return 0; |
| } |
| |
| int kvm__arch_free_firmware(struct kvm *kvm) |
| { |
| return 0; |
| } |
| |
| void kvm__arch_read_term(struct kvm *kvm) |
| { |
| serial8250__update_consoles(kvm); |
| virtio_console__inject_interrupt(kvm); |
| } |