| #ifndef _LINUX_VIRTIO_BLK_H |
| #define _LINUX_VIRTIO_BLK_H |
| /* This header is BSD licensed so anyone can use the definitions to implement |
| * compatible drivers/servers. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the name of IBM nor the names of its contributors |
| * may be used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. */ |
| #include <linux/types.h> |
| #include <linux/virtio_ids.h> |
| #include <linux/virtio_config.h> |
| #include <linux/virtio_types.h> |
| |
| /* Feature bits */ |
| #define VIRTIO_BLK_F_SIZE_MAX 1 /* Indicates maximum segment size */ |
| #define VIRTIO_BLK_F_SEG_MAX 2 /* Indicates maximum # of segments */ |
| #define VIRTIO_BLK_F_GEOMETRY 4 /* Legacy geometry available */ |
| #define VIRTIO_BLK_F_RO 5 /* Disk is read-only */ |
| #define VIRTIO_BLK_F_BLK_SIZE 6 /* Block size of disk is available*/ |
| #define VIRTIO_BLK_F_TOPOLOGY 10 /* Topology information is available */ |
| #define VIRTIO_BLK_F_MQ 12 /* support more than one vq */ |
| #define VIRTIO_BLK_F_DISCARD 13 /* DISCARD is supported */ |
| #define VIRTIO_BLK_F_WRITE_ZEROES 14 /* WRITE ZEROES is supported */ |
| #define VIRTIO_BLK_F_SECURE_ERASE 16 /* Secure Erase is supported */ |
| #define VIRTIO_BLK_F_ZONED 17 /* Zoned block device */ |
| |
| /* Legacy feature bits */ |
| #ifndef VIRTIO_BLK_NO_LEGACY |
| #define VIRTIO_BLK_F_BARRIER 0 /* Does host support barriers? */ |
| #define VIRTIO_BLK_F_SCSI 7 /* Supports scsi command passthru */ |
| #define VIRTIO_BLK_F_FLUSH 9 /* Flush command supported */ |
| #define VIRTIO_BLK_F_CONFIG_WCE 11 /* Writeback mode available in config */ |
| #ifndef __KERNEL__ |
| /* Old (deprecated) name for VIRTIO_BLK_F_FLUSH. */ |
| #define VIRTIO_BLK_F_WCE VIRTIO_BLK_F_FLUSH |
| #endif |
| #endif /* !VIRTIO_BLK_NO_LEGACY */ |
| |
| #define VIRTIO_BLK_ID_BYTES 20 /* ID string length */ |
| |
| struct virtio_blk_config { |
| /* The capacity (in 512-byte sectors). */ |
| __virtio64 capacity; |
| /* The maximum segment size (if VIRTIO_BLK_F_SIZE_MAX) */ |
| __virtio32 size_max; |
| /* The maximum number of segments (if VIRTIO_BLK_F_SEG_MAX) */ |
| __virtio32 seg_max; |
| /* geometry of the device (if VIRTIO_BLK_F_GEOMETRY) */ |
| struct virtio_blk_geometry { |
| __virtio16 cylinders; |
| __u8 heads; |
| __u8 sectors; |
| } geometry; |
| |
| /* block size of device (if VIRTIO_BLK_F_BLK_SIZE) */ |
| __virtio32 blk_size; |
| |
| /* the next 4 entries are guarded by VIRTIO_BLK_F_TOPOLOGY */ |
| /* exponent for physical block per logical block. */ |
| __u8 physical_block_exp; |
| /* alignment offset in logical blocks. */ |
| __u8 alignment_offset; |
| /* minimum I/O size without performance penalty in logical blocks. */ |
| __virtio16 min_io_size; |
| /* optimal sustained I/O size in logical blocks. */ |
| __virtio32 opt_io_size; |
| |
| /* writeback mode (if VIRTIO_BLK_F_CONFIG_WCE) */ |
| __u8 wce; |
| __u8 unused; |
| |
| /* number of vqs, only available when VIRTIO_BLK_F_MQ is set */ |
| __virtio16 num_queues; |
| |
| /* the next 3 entries are guarded by VIRTIO_BLK_F_DISCARD */ |
| /* |
| * The maximum discard sectors (in 512-byte sectors) for |
| * one segment. |
| */ |
| __virtio32 max_discard_sectors; |
| /* |
| * The maximum number of discard segments in a |
| * discard command. |
| */ |
| __virtio32 max_discard_seg; |
| /* Discard commands must be aligned to this number of sectors. */ |
| __virtio32 discard_sector_alignment; |
| |
| /* the next 3 entries are guarded by VIRTIO_BLK_F_WRITE_ZEROES */ |
| /* |
| * The maximum number of write zeroes sectors (in 512-byte sectors) in |
| * one segment. |
| */ |
| __virtio32 max_write_zeroes_sectors; |
| /* |
| * The maximum number of segments in a write zeroes |
| * command. |
| */ |
| __virtio32 max_write_zeroes_seg; |
| /* |
| * Set if a VIRTIO_BLK_T_WRITE_ZEROES request may result in the |
| * deallocation of one or more of the sectors. |
| */ |
| __u8 write_zeroes_may_unmap; |
| |
| __u8 unused1[3]; |
| |
| /* the next 3 entries are guarded by VIRTIO_BLK_F_SECURE_ERASE */ |
| /* |
| * The maximum secure erase sectors (in 512-byte sectors) for |
| * one segment. |
| */ |
| __virtio32 max_secure_erase_sectors; |
| /* |
| * The maximum number of secure erase segments in a |
| * secure erase command. |
| */ |
| __virtio32 max_secure_erase_seg; |
| /* Secure erase commands must be aligned to this number of sectors. */ |
| __virtio32 secure_erase_sector_alignment; |
| |
| /* Zoned block device characteristics (if VIRTIO_BLK_F_ZONED) */ |
| struct virtio_blk_zoned_characteristics { |
| __virtio32 zone_sectors; |
| __virtio32 max_open_zones; |
| __virtio32 max_active_zones; |
| __virtio32 max_append_sectors; |
| __virtio32 write_granularity; |
| __u8 model; |
| __u8 unused2[3]; |
| } zoned; |
| } __attribute__((packed)); |
| |
| /* |
| * Command types |
| * |
| * Usage is a bit tricky as some bits are used as flags and some are not. |
| * |
| * Rules: |
| * VIRTIO_BLK_T_OUT may be combined with VIRTIO_BLK_T_SCSI_CMD or |
| * VIRTIO_BLK_T_BARRIER. VIRTIO_BLK_T_FLUSH is a command of its own |
| * and may not be combined with any of the other flags. |
| */ |
| |
| /* These two define direction. */ |
| #define VIRTIO_BLK_T_IN 0 |
| #define VIRTIO_BLK_T_OUT 1 |
| |
| #ifndef VIRTIO_BLK_NO_LEGACY |
| /* This bit says it's a scsi command, not an actual read or write. */ |
| #define VIRTIO_BLK_T_SCSI_CMD 2 |
| #endif /* VIRTIO_BLK_NO_LEGACY */ |
| |
| /* Cache flush command */ |
| #define VIRTIO_BLK_T_FLUSH 4 |
| |
| /* Get device ID command */ |
| #define VIRTIO_BLK_T_GET_ID 8 |
| |
| /* Discard command */ |
| #define VIRTIO_BLK_T_DISCARD 11 |
| |
| /* Write zeroes command */ |
| #define VIRTIO_BLK_T_WRITE_ZEROES 13 |
| |
| /* Secure erase command */ |
| #define VIRTIO_BLK_T_SECURE_ERASE 14 |
| |
| /* Zone append command */ |
| #define VIRTIO_BLK_T_ZONE_APPEND 15 |
| |
| /* Report zones command */ |
| #define VIRTIO_BLK_T_ZONE_REPORT 16 |
| |
| /* Open zone command */ |
| #define VIRTIO_BLK_T_ZONE_OPEN 18 |
| |
| /* Close zone command */ |
| #define VIRTIO_BLK_T_ZONE_CLOSE 20 |
| |
| /* Finish zone command */ |
| #define VIRTIO_BLK_T_ZONE_FINISH 22 |
| |
| /* Reset zone command */ |
| #define VIRTIO_BLK_T_ZONE_RESET 24 |
| |
| /* Reset All zones command */ |
| #define VIRTIO_BLK_T_ZONE_RESET_ALL 26 |
| |
| #ifndef VIRTIO_BLK_NO_LEGACY |
| /* Barrier before this op. */ |
| #define VIRTIO_BLK_T_BARRIER 0x80000000 |
| #endif /* !VIRTIO_BLK_NO_LEGACY */ |
| |
| /* |
| * This comes first in the read scatter-gather list. |
| * For legacy virtio, if VIRTIO_F_ANY_LAYOUT is not negotiated, |
| * this is the first element of the read scatter-gather list. |
| */ |
| struct virtio_blk_outhdr { |
| /* VIRTIO_BLK_T* */ |
| __virtio32 type; |
| /* io priority. */ |
| __virtio32 ioprio; |
| /* Sector (ie. 512 byte offset) */ |
| __virtio64 sector; |
| }; |
| |
| /* |
| * Supported zoned device models. |
| */ |
| |
| /* Regular block device */ |
| #define VIRTIO_BLK_Z_NONE 0 |
| /* Host-managed zoned device */ |
| #define VIRTIO_BLK_Z_HM 1 |
| /* Host-aware zoned device */ |
| #define VIRTIO_BLK_Z_HA 2 |
| |
| /* |
| * Zone descriptor. A part of VIRTIO_BLK_T_ZONE_REPORT command reply. |
| */ |
| struct virtio_blk_zone_descriptor { |
| /* Zone capacity */ |
| __virtio64 z_cap; |
| /* The starting sector of the zone */ |
| __virtio64 z_start; |
| /* Zone write pointer position in sectors */ |
| __virtio64 z_wp; |
| /* Zone type */ |
| __u8 z_type; |
| /* Zone state */ |
| __u8 z_state; |
| __u8 reserved[38]; |
| }; |
| |
| struct virtio_blk_zone_report { |
| __virtio64 nr_zones; |
| __u8 reserved[56]; |
| struct virtio_blk_zone_descriptor zones[]; |
| }; |
| |
| /* |
| * Supported zone types. |
| */ |
| |
| /* Conventional zone */ |
| #define VIRTIO_BLK_ZT_CONV 1 |
| /* Sequential Write Required zone */ |
| #define VIRTIO_BLK_ZT_SWR 2 |
| /* Sequential Write Preferred zone */ |
| #define VIRTIO_BLK_ZT_SWP 3 |
| |
| /* |
| * Zone states that are available for zones of all types. |
| */ |
| |
| /* Not a write pointer (conventional zones only) */ |
| #define VIRTIO_BLK_ZS_NOT_WP 0 |
| /* Empty */ |
| #define VIRTIO_BLK_ZS_EMPTY 1 |
| /* Implicitly Open */ |
| #define VIRTIO_BLK_ZS_IOPEN 2 |
| /* Explicitly Open */ |
| #define VIRTIO_BLK_ZS_EOPEN 3 |
| /* Closed */ |
| #define VIRTIO_BLK_ZS_CLOSED 4 |
| /* Read-Only */ |
| #define VIRTIO_BLK_ZS_RDONLY 13 |
| /* Full */ |
| #define VIRTIO_BLK_ZS_FULL 14 |
| /* Offline */ |
| #define VIRTIO_BLK_ZS_OFFLINE 15 |
| |
| /* Unmap this range (only valid for write zeroes command) */ |
| #define VIRTIO_BLK_WRITE_ZEROES_FLAG_UNMAP 0x00000001 |
| |
| /* Discard/write zeroes range for each request. */ |
| struct virtio_blk_discard_write_zeroes { |
| /* discard/write zeroes start sector */ |
| __le64 sector; |
| /* number of discard/write zeroes sectors */ |
| __le32 num_sectors; |
| /* flags for this range */ |
| __le32 flags; |
| }; |
| |
| #ifndef VIRTIO_BLK_NO_LEGACY |
| struct virtio_scsi_inhdr { |
| __virtio32 errors; |
| __virtio32 data_len; |
| __virtio32 sense_len; |
| __virtio32 residual; |
| }; |
| #endif /* !VIRTIO_BLK_NO_LEGACY */ |
| |
| /* And this is the final byte of the write scatter-gather list. */ |
| #define VIRTIO_BLK_S_OK 0 |
| #define VIRTIO_BLK_S_IOERR 1 |
| #define VIRTIO_BLK_S_UNSUPP 2 |
| |
| /* Error codes that are specific to zoned block devices */ |
| #define VIRTIO_BLK_S_ZONE_INVALID_CMD 3 |
| #define VIRTIO_BLK_S_ZONE_UNALIGNED_WP 4 |
| #define VIRTIO_BLK_S_ZONE_OPEN_RESOURCE 5 |
| #define VIRTIO_BLK_S_ZONE_ACTIVE_RESOURCE 6 |
| |
| #endif /* _LINUX_VIRTIO_BLK_H */ |