| #include "kvm/kvm.h" |
| #include "kvm/vfio.h" |
| #include "kvm/ioport.h" |
| |
| #include <linux/list.h> |
| |
| #define VFIO_DEV_DIR "/dev/vfio" |
| #define VFIO_DEV_NODE VFIO_DEV_DIR "/vfio" |
| #define IOMMU_GROUP_DIR "/sys/kernel/iommu_groups" |
| |
| static int vfio_container; |
| static LIST_HEAD(vfio_groups); |
| static struct vfio_device *vfio_devices; |
| /* Just a random start of SID for pvIOMMU, nothing special. */ |
| static int sid_offset = 0x55; |
| |
| static int vfio_device_pci_parser(const struct option *opt, char *arg, |
| struct vfio_device_params *dev) |
| { |
| unsigned int domain, bus, devnr, fn; |
| |
| int nr = sscanf(arg, "%4x:%2x:%2x.%1x", &domain, &bus, &devnr, &fn); |
| if (nr < 4) { |
| domain = 0; |
| nr = sscanf(arg, "%2x:%2x.%1x", &bus, &devnr, &fn); |
| if (nr < 3) { |
| pr_err("Invalid device identifier %s", arg); |
| return -EINVAL; |
| } |
| } |
| |
| dev->type = VFIO_DEVICE_PCI; |
| dev->bus = "pci"; |
| dev->name = malloc(13); |
| if (!dev->name) |
| return -ENOMEM; |
| |
| snprintf(dev->name, 13, "%04x:%02x:%02x.%x", domain, bus, devnr, fn); |
| |
| return 0; |
| } |
| |
| static int vfio_device_platform_parser(const struct option *opt, char *arg, |
| struct vfio_device_params *dev) |
| { |
| dev->name = strdup(arg); |
| if (!dev->name) |
| return -ENOMEM; |
| |
| dev->type = VFIO_DEVICE_PLAFORM; |
| dev->bus = "platform"; |
| |
| return 0; |
| } |
| |
| int vfio_device_parser(const struct option *opt, const char *arg, int unset) |
| { |
| int ret = -EINVAL; |
| static int idx = 0; |
| struct kvm *kvm = opt->ptr; |
| struct vfio_device_params *dev, *devs; |
| char *cur, *buf = strdup(arg); |
| |
| if (!buf) |
| return -ENOMEM; |
| |
| if (idx >= MAX_VFIO_DEVICES) { |
| pr_warning("Too many VFIO devices"); |
| goto out_free_buf; |
| } |
| |
| devs = realloc(kvm->cfg.vfio_devices, sizeof(*dev) * (idx + 1)); |
| if (!devs) { |
| ret = -ENOMEM; |
| goto out_free_buf; |
| } |
| |
| kvm->cfg.vfio_devices = devs; |
| dev = &devs[idx]; |
| |
| cur = strtok(buf, ","); |
| if (!cur) |
| goto out_free_buf; |
| |
| if (!strcmp(opt->long_name, "vfio-pci")) |
| ret = vfio_device_pci_parser(opt, cur, dev); |
| else if (!strcmp(opt->long_name, "vfio-platform")) |
| ret = vfio_device_platform_parser(opt, cur, dev); |
| else |
| ret = -EINVAL; |
| |
| if (!ret) |
| kvm->cfg.num_vfio_devices = ++idx; |
| |
| out_free_buf: |
| free(buf); |
| |
| return ret; |
| } |
| |
| static bool vfio_ioport_in(struct vfio_region *region, u32 offset, |
| void *data, int len) |
| { |
| struct vfio_device *vdev = region->vdev; |
| ssize_t nr; |
| u32 val; |
| |
| if (!(region->info.flags & VFIO_REGION_INFO_FLAG_READ)) |
| return false; |
| |
| nr = pread(vdev->fd, &val, len, region->info.offset + offset); |
| if (nr != len) { |
| vfio_dev_err(vdev, "could not read %d bytes from I/O port 0x%x\n", |
| len, offset + region->port_base); |
| return false; |
| } |
| |
| switch (len) { |
| case 1: |
| ioport__write8(data, val); |
| break; |
| case 2: |
| ioport__write16(data, val); |
| break; |
| case 4: |
| ioport__write32(data, val); |
| break; |
| default: |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static bool vfio_ioport_out(struct vfio_region *region, u32 offset, |
| void *data, int len) |
| { |
| struct vfio_device *vdev = region->vdev; |
| ssize_t nr; |
| u32 val; |
| |
| |
| if (!(region->info.flags & VFIO_REGION_INFO_FLAG_WRITE)) |
| return false; |
| |
| switch (len) { |
| case 1: |
| val = ioport__read8(data); |
| break; |
| case 2: |
| val = ioport__read16(data); |
| break; |
| case 4: |
| val = ioport__read32(data); |
| break; |
| default: |
| return false; |
| } |
| |
| nr = pwrite(vdev->fd, &val, len, region->info.offset + offset); |
| if (nr != len) |
| vfio_dev_err(vdev, "could not write %d bytes to I/O port 0x%x", |
| len, offset + region->port_base); |
| |
| return nr == len; |
| } |
| |
| static void vfio_ioport_mmio(struct kvm_cpu *vcpu, u64 addr, u8 *data, u32 len, |
| u8 is_write, void *ptr) |
| { |
| struct vfio_region *region = ptr; |
| u32 offset = addr - region->port_base; |
| |
| if (is_write) |
| vfio_ioport_out(region, offset, data, len); |
| else |
| vfio_ioport_in(region, offset, data, len); |
| } |
| |
| static void vfio_mmio_access(struct kvm_cpu *vcpu, u64 addr, u8 *data, u32 len, |
| u8 is_write, void *ptr) |
| { |
| u64 val; |
| ssize_t nr; |
| struct vfio_region *region = ptr; |
| struct vfio_device *vdev = region->vdev; |
| |
| u32 offset = addr - region->guest_phys_addr; |
| |
| if (len < 1 || len > 8) |
| goto err_report; |
| |
| if (is_write) { |
| if (!(region->info.flags & VFIO_REGION_INFO_FLAG_WRITE)) |
| goto err_report; |
| |
| memcpy(&val, data, len); |
| |
| nr = pwrite(vdev->fd, &val, len, region->info.offset + offset); |
| if ((u32)nr != len) |
| goto err_report; |
| } else { |
| if (!(region->info.flags & VFIO_REGION_INFO_FLAG_READ)) |
| goto err_report; |
| |
| nr = pread(vdev->fd, &val, len, region->info.offset + offset); |
| if ((u32)nr != len) |
| goto err_report; |
| |
| memcpy(data, &val, len); |
| } |
| |
| return; |
| |
| err_report: |
| vfio_dev_err(vdev, "could not %s %u bytes at 0x%x (0x%llx)", is_write ? |
| "write" : "read", len, offset, addr); |
| } |
| |
| static int vfio_setup_trap_region(struct kvm *kvm, struct vfio_device *vdev, |
| struct vfio_region *region) |
| { |
| if (region->is_ioport) { |
| int port; |
| |
| port = kvm__register_pio(kvm, region->port_base, |
| region->info.size, vfio_ioport_mmio, |
| region); |
| if (port < 0) |
| return port; |
| return 0; |
| } |
| |
| return kvm__register_mmio(kvm, region->guest_phys_addr, |
| region->info.size, false, vfio_mmio_access, |
| region); |
| } |
| |
| int vfio_map_region(struct kvm *kvm, struct vfio_device *vdev, |
| struct vfio_region *region) |
| { |
| void *base; |
| int ret, prot = 0; |
| /* KVM needs page-aligned regions */ |
| u64 map_size = ALIGN(region->info.size, PAGE_SIZE); |
| |
| if (!(region->info.flags & VFIO_REGION_INFO_FLAG_MMAP)) |
| return vfio_setup_trap_region(kvm, vdev, region); |
| |
| /* |
| * KVM_SET_USER_MEMORY_REGION will fail because the guest physical |
| * address isn't page aligned, let's emulate the region ourselves. |
| */ |
| if (region->guest_phys_addr & (PAGE_SIZE - 1)) |
| return kvm__register_mmio(kvm, region->guest_phys_addr, |
| region->info.size, false, |
| vfio_mmio_access, region); |
| |
| if (region->info.flags & VFIO_REGION_INFO_FLAG_READ) |
| prot |= PROT_READ; |
| if (region->info.flags & VFIO_REGION_INFO_FLAG_WRITE) |
| prot |= PROT_WRITE; |
| |
| base = mmap(NULL, region->info.size, prot, MAP_SHARED, vdev->fd, |
| region->info.offset); |
| if (base == MAP_FAILED) { |
| /* TODO: support sparse mmap */ |
| vfio_dev_warn(vdev, "failed to mmap region %u (0x%llx bytes), falling back to trapping", |
| region->info.index, region->info.size); |
| return vfio_setup_trap_region(kvm, vdev, region); |
| } |
| region->host_addr = base; |
| |
| ret = kvm__register_dev_mem(kvm, region->guest_phys_addr, map_size, |
| region->host_addr); |
| if (ret) { |
| vfio_dev_err(vdev, "failed to register region with KVM"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| void vfio_unmap_region(struct kvm *kvm, struct vfio_region *region) |
| { |
| u64 map_size; |
| |
| if (region->host_addr) { |
| map_size = ALIGN(region->info.size, PAGE_SIZE); |
| kvm__destroy_mem(kvm, region->guest_phys_addr, map_size, |
| region->host_addr); |
| munmap(region->host_addr, region->info.size); |
| region->host_addr = NULL; |
| } else if (region->is_ioport) { |
| kvm__deregister_pio(kvm, region->port_base); |
| } else { |
| kvm__deregister_mmio(kvm, region->guest_phys_addr); |
| } |
| } |
| |
| static int vfio_configure_device(struct kvm *kvm, struct vfio_device *vdev) |
| { |
| int ret; |
| struct vfio_group *group = vdev->group; |
| |
| vdev->fd = ioctl(group->fd, VFIO_GROUP_GET_DEVICE_FD, |
| vdev->params->name); |
| if (vdev->fd < 0) { |
| vfio_dev_warn(vdev, "failed to get fd"); |
| |
| /* The device might be a bridge without an fd */ |
| return 0; |
| } |
| |
| vdev->info.argsz = sizeof(vdev->info); |
| if (ioctl(vdev->fd, VFIO_DEVICE_GET_INFO, &vdev->info)) { |
| ret = -errno; |
| vfio_dev_err(vdev, "failed to get info"); |
| goto err_close_device; |
| } |
| |
| if (vdev->info.flags & VFIO_DEVICE_FLAGS_RESET && |
| ioctl(vdev->fd, VFIO_DEVICE_RESET) < 0) |
| vfio_dev_warn(vdev, "failed to reset device"); |
| |
| vdev->regions = calloc(vdev->info.num_regions, sizeof(*vdev->regions)); |
| if (!vdev->regions) { |
| ret = -ENOMEM; |
| goto err_close_device; |
| } |
| |
| /* Now for the bus-specific initialization... */ |
| switch (vdev->params->type) { |
| case VFIO_DEVICE_PCI: |
| BUG_ON(!(vdev->info.flags & VFIO_DEVICE_FLAGS_PCI)); |
| ret = vfio_pci_setup_device(kvm, vdev); |
| break; |
| case VFIO_DEVICE_PLAFORM: |
| ret = vfio_platform_setup_device(kvm, vdev); |
| break; |
| default: |
| BUG_ON(1); |
| ret = -EINVAL; |
| } |
| |
| if (ret) |
| goto err_free_regions; |
| |
| vfio_dev_info(vdev, "assigned to device number 0x%x in group %lu", |
| vdev->dev_hdr.dev_num, group->id); |
| |
| return 0; |
| |
| err_free_regions: |
| free(vdev->regions); |
| err_close_device: |
| close(vdev->fd); |
| |
| return ret; |
| } |
| |
| static int vfio_configure_devices(struct kvm *kvm) |
| { |
| int i, ret; |
| |
| for (i = 0; i < kvm->cfg.num_vfio_devices; ++i) { |
| ret = vfio_configure_device(kvm, &vfio_devices[i]); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int vfio_get_iommu_type(void) |
| { |
| if (ioctl(vfio_container, VFIO_CHECK_EXTENSION, VFIO_TYPE1v2_IOMMU)) |
| return VFIO_TYPE1v2_IOMMU; |
| |
| if (ioctl(vfio_container, VFIO_CHECK_EXTENSION, VFIO_TYPE1_IOMMU)) |
| return VFIO_TYPE1_IOMMU; |
| |
| return -ENODEV; |
| } |
| |
| static int vfio_map_mem_bank(struct kvm *kvm, struct kvm_mem_bank *bank, void *data) |
| { |
| int ret = 0; |
| struct vfio_iommu_type1_dma_map dma_map = { |
| .argsz = sizeof(dma_map), |
| .flags = VFIO_DMA_MAP_FLAG_READ | VFIO_DMA_MAP_FLAG_WRITE, |
| .vaddr = (unsigned long)bank->host_addr, |
| .iova = (u64)bank->guest_phys_addr, |
| .size = bank->size, |
| }; |
| |
| /* Map the guest memory for DMA (i.e. provide isolation) */ |
| if (ioctl(vfio_container, VFIO_IOMMU_MAP_DMA, &dma_map)) { |
| ret = -errno; |
| pr_err("Failed to map 0x%llx -> 0x%llx (%llu) for DMA", |
| dma_map.iova, dma_map.vaddr, dma_map.size); |
| } |
| |
| return ret; |
| } |
| |
| static int vfio_unmap_mem_bank(struct kvm *kvm, struct kvm_mem_bank *bank, void *data) |
| { |
| struct vfio_iommu_type1_dma_unmap dma_unmap = { |
| .argsz = sizeof(dma_unmap), |
| .size = bank->size, |
| .iova = bank->guest_phys_addr, |
| }; |
| |
| if (kvm->cfg.vfio_no_iommu) |
| return 0; |
| |
| ioctl(vfio_container, VFIO_IOMMU_UNMAP_DMA, &dma_unmap); |
| |
| return 0; |
| } |
| |
| static int vfio_configure_reserved_regions(struct kvm *kvm, |
| struct vfio_group *group) |
| { |
| FILE *file; |
| int ret = 0; |
| char type[9]; |
| char filename[PATH_MAX]; |
| unsigned long long start, end; |
| |
| snprintf(filename, PATH_MAX, IOMMU_GROUP_DIR "/%lu/reserved_regions", |
| group->id); |
| |
| /* reserved_regions might not be present on older systems */ |
| if (access(filename, F_OK)) |
| return 0; |
| |
| file = fopen(filename, "r"); |
| if (!file) |
| return -errno; |
| |
| while (fscanf(file, "0x%llx 0x%llx %8s\n", &start, &end, type) == 3) { |
| ret = kvm__reserve_mem(kvm, start, end - start + 1); |
| if (ret) |
| break; |
| } |
| |
| fclose(file); |
| |
| return ret; |
| } |
| |
| static int vfio_configure_groups(struct kvm *kvm) |
| { |
| int ret; |
| struct vfio_group *group; |
| |
| list_for_each_entry(group, &vfio_groups, list) { |
| ret = vfio_configure_reserved_regions(kvm, group); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static struct vfio_group *vfio_group_create(struct kvm *kvm, unsigned long id) |
| { |
| int ret; |
| struct vfio_group *group; |
| char group_node[PATH_MAX]; |
| struct vfio_group_status group_status = { |
| .argsz = sizeof(group_status), |
| }; |
| |
| group = calloc(1, sizeof(*group)); |
| if (!group) |
| return NULL; |
| |
| group->id = id; |
| group->refs = 1; |
| |
| ret = snprintf(group_node, PATH_MAX, VFIO_DEV_DIR "/%lu", id); |
| if (ret < 0 || ret == PATH_MAX) |
| return NULL; |
| |
| group->fd = open(group_node, O_RDWR); |
| if (group->fd < 0) { |
| pr_err("Failed to open IOMMU group %s", group_node); |
| goto err_free_group; |
| } |
| |
| if (ioctl(group->fd, VFIO_GROUP_GET_STATUS, &group_status)) { |
| pr_err("Failed to determine status of IOMMU group %lu", id); |
| goto err_close_group; |
| } |
| |
| if (!(group_status.flags & VFIO_GROUP_FLAGS_VIABLE)) { |
| pr_err("IOMMU group %lu is not viable", id); |
| goto err_close_group; |
| } |
| |
| if (ioctl(group->fd, VFIO_GROUP_SET_CONTAINER, &vfio_container)) { |
| pr_err("Failed to add IOMMU group %lu to VFIO container", id); |
| goto err_close_group; |
| } |
| |
| list_add(&group->list, &vfio_groups); |
| |
| return group; |
| |
| err_close_group: |
| close(group->fd); |
| err_free_group: |
| free(group); |
| |
| return NULL; |
| } |
| |
| static void vfio_group_exit(struct kvm *kvm, struct vfio_group *group) |
| { |
| if (--group->refs != 0) |
| return; |
| |
| ioctl(group->fd, VFIO_GROUP_UNSET_CONTAINER); |
| |
| list_del(&group->list); |
| close(group->fd); |
| free(group); |
| } |
| |
| static struct vfio_group * |
| vfio_group_get_for_dev(struct kvm *kvm, struct vfio_device *vdev) |
| { |
| int dirfd; |
| ssize_t ret; |
| char *group_name; |
| unsigned long group_id; |
| char group_path[PATH_MAX]; |
| struct vfio_group *group = NULL; |
| |
| /* Find IOMMU group for this device */ |
| dirfd = open(vdev->sysfs_path, O_DIRECTORY | O_PATH | O_RDONLY); |
| if (dirfd < 0) { |
| vfio_dev_err(vdev, "failed to open '%s'", vdev->sysfs_path); |
| return NULL; |
| } |
| |
| ret = readlinkat(dirfd, "iommu_group", group_path, PATH_MAX); |
| if (ret < 0) { |
| vfio_dev_err(vdev, "no iommu_group"); |
| goto out_close; |
| } |
| if (ret == PATH_MAX) |
| goto out_close; |
| |
| group_path[ret] = '\0'; |
| |
| group_name = basename(group_path); |
| errno = 0; |
| group_id = strtoul(group_name, NULL, 10); |
| if (errno) |
| goto out_close; |
| |
| list_for_each_entry(group, &vfio_groups, list) { |
| if (group->id == group_id) { |
| group->refs++; |
| return group; |
| } |
| } |
| |
| group = vfio_group_create(kvm, group_id); |
| |
| out_close: |
| close(dirfd); |
| return group; |
| } |
| |
| static int vfio_device_init(struct kvm *kvm, struct vfio_device *vdev) |
| { |
| int ret; |
| char dev_path[PATH_MAX]; |
| struct vfio_group *group; |
| |
| ret = snprintf(dev_path, PATH_MAX, "/sys/bus/%s/devices/%s", |
| vdev->params->bus, vdev->params->name); |
| if (ret < 0 || ret == PATH_MAX) |
| return -EINVAL; |
| |
| vdev->sysfs_path = strndup(dev_path, PATH_MAX); |
| if (!vdev->sysfs_path) |
| return -errno; |
| |
| group = vfio_group_get_for_dev(kvm, vdev); |
| if (!group) { |
| free(vdev->sysfs_path); |
| return -EINVAL; |
| } |
| |
| vdev->group = group; |
| |
| return 0; |
| } |
| |
| static void vfio_device_exit(struct kvm *kvm, struct vfio_device *vdev) |
| { |
| vfio_group_exit(kvm, vdev->group); |
| |
| switch (vdev->params->type) { |
| case VFIO_DEVICE_PCI: |
| vfio_pci_teardown_device(kvm, vdev); |
| break; |
| case VFIO_DEVICE_PLAFORM: |
| vfio_platform_teardown_device(kvm, vdev); |
| break; |
| default: |
| vfio_dev_warn(vdev, "no teardown function for device"); |
| } |
| |
| close(vdev->fd); |
| |
| free(vdev->regions); |
| free(vdev->sysfs_path); |
| } |
| |
| static int vfio_container_init(struct kvm *kvm) |
| { |
| int api, i, ret, iommu_type;; |
| |
| /* Create a container for our IOMMU groups */ |
| vfio_container = open(VFIO_DEV_NODE, O_RDWR); |
| if (vfio_container == -1) { |
| ret = errno; |
| pr_err("Failed to open %s", VFIO_DEV_NODE); |
| return ret; |
| } |
| |
| api = ioctl(vfio_container, VFIO_GET_API_VERSION); |
| if (api != VFIO_API_VERSION) { |
| pr_err("Unknown VFIO API version %d", api); |
| return -ENODEV; |
| } |
| |
| iommu_type = vfio_get_iommu_type(); |
| if (iommu_type < 0) { |
| pr_err("VFIO type-1 IOMMU not supported on this platform"); |
| return iommu_type; |
| } |
| |
| /* Create groups for our devices and add them to the container */ |
| for (i = 0; i < kvm->cfg.num_vfio_devices; ++i) { |
| vfio_devices[i].params = &kvm->cfg.vfio_devices[i]; |
| |
| ret = vfio_device_init(kvm, &vfio_devices[i]); |
| if (ret) |
| return ret; |
| } |
| |
| /* Finalise the container */ |
| if (ioctl(vfio_container, VFIO_SET_IOMMU, iommu_type)) { |
| ret = -errno; |
| pr_err("Failed to set IOMMU type %d for VFIO container", |
| iommu_type); |
| return ret; |
| } else { |
| pr_info("Using IOMMU type %d for VFIO container", iommu_type); |
| } |
| |
| if (kvm->cfg.vfio_no_iommu) |
| return 0; |
| |
| return kvm__for_each_mem_bank(kvm, KVM_MEM_TYPE_RAM, vfio_map_mem_bank, |
| NULL); |
| } |
| |
| static int vfio_configure_kvm_device(struct kvm *kvm) |
| { |
| pr_err("Create KVM-VFIO device\n"); |
| struct vfio_group *group; |
| struct kvm_create_device cd = { |
| .type = KVM_DEV_TYPE_VFIO, |
| }; |
| int ret, i, pviommufd; |
| u32 j; |
| |
| ret = ioctl(kvm->vm_fd, KVM_CREATE_DEVICE, &cd); |
| if (ret) { |
| pr_err("Failed to create kvm-vfio bridge %d\n", ret); |
| return ret; |
| } |
| |
| list_for_each_entry(group, &vfio_groups, list) { |
| struct kvm_device_attr attr = { |
| .group = KVM_DEV_VFIO_GROUP, |
| .attr = KVM_DEV_VFIO_GROUP_ADD, |
| .addr = (uint64_t)(unsigned long)&group->fd, |
| }; |
| ret = ioctl(cd.fd, KVM_SET_DEVICE_ATTR, &attr); |
| if (ret) { |
| pr_err("Failed to create add group to kvm-vfio device %d\n", ret); |
| return ret; |
| } |
| } |
| |
| /* Create pvIOMMU for guest. */ |
| struct kvm_device_attr attr = { |
| .group = KVM_DEV_VFIO_PVIOMMU, |
| .attr = KVM_DEV_VFIO_PVIOMMU_ATTACH, |
| }; |
| |
| pviommufd = ioctl(cd.fd, KVM_SET_DEVICE_ATTR, &attr); |
| if (pviommufd < 0) { |
| pr_err("Failed to attach pviommu to kvm-vfio device %d\n", ret); |
| return pviommufd; |
| } |
| |
| /* For VFIO devices, add to the pvIOMMU. */ |
| for (i = 0 ; i < kvm->cfg.num_vfio_devices; ++i) { |
| struct kvm_vfio_iommu_info info = { |
| .device_fd = vfio_devices[i].fd, |
| }; |
| /* Probe number of SIDs for this device. */ |
| struct kvm_device_attr attr = { |
| .group = KVM_DEV_VFIO_PVIOMMU, |
| .attr = KVM_DEV_VFIO_PVIOMMU_GET_INFO, |
| .addr = (uint64_t)&info, |
| }; |
| ret = ioctl(cd.fd, KVM_SET_DEVICE_ATTR, &attr); |
| /* Set vSID => SID translation. */ |
| for (j = 0; j < info.nr_sids; ++j) { |
| struct kvm_vfio_iommu_config config = { |
| .vfio_dev_fd = vfio_devices[i].fd, |
| .sid_idx = j, |
| .vsid = sid_offset++, |
| }; |
| |
| ret = ioctl(pviommufd, KVM_PVIOMMU_SET_CONFIG, &config); |
| if (ret) { |
| pr_err("Failed to set vsid(%d) => sid(%d) translation, err %d\n", config.vsid, j, ret); |
| return ret; |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int vfio__init(struct kvm *kvm) |
| { |
| int ret; |
| |
| if (!kvm->cfg.num_vfio_devices) |
| return 0; |
| |
| vfio_devices = calloc(kvm->cfg.num_vfio_devices, sizeof(*vfio_devices)); |
| if (!vfio_devices) |
| return -ENOMEM; |
| |
| ret = vfio_container_init(kvm); |
| if (ret) |
| return ret; |
| |
| ret = vfio_configure_groups(kvm); |
| if (ret) |
| return ret; |
| |
| ret = vfio_configure_devices(kvm); |
| if (ret) |
| return ret; |
| |
| ret = vfio_configure_kvm_device(kvm); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| dev_base_init(vfio__init); |
| |
| static int vfio__exit(struct kvm *kvm) |
| { |
| int i; |
| |
| if (!kvm->cfg.num_vfio_devices) |
| return 0; |
| |
| for (i = 0; i < kvm->cfg.num_vfio_devices; i++) |
| vfio_device_exit(kvm, &vfio_devices[i]); |
| |
| free(vfio_devices); |
| |
| kvm__for_each_mem_bank(kvm, KVM_MEM_TYPE_RAM, vfio_unmap_mem_bank, NULL); |
| close(vfio_container); |
| |
| free(kvm->cfg.vfio_devices); |
| |
| return 0; |
| } |
| dev_base_exit(vfio__exit); |