| #include "kvm/kvm.h" |
| #include "kvm/util.h" |
| #include "kvm/8250-serial.h" |
| #include "kvm/virtio-console.h" |
| #include "kvm/fdt.h" |
| |
| #include <linux/kernel.h> |
| #include <linux/kvm.h> |
| #include <linux/sizes.h> |
| |
| struct kvm_ext kvm_req_ext[] = { |
| { DEFINE_KVM_EXT(KVM_CAP_ONE_REG) }, |
| { 0, 0 }, |
| }; |
| |
| u64 kvm__arch_default_ram_address(void) |
| { |
| return RISCV_RAM; |
| } |
| |
| void kvm__arch_validate_cfg(struct kvm *kvm) |
| { |
| } |
| |
| bool kvm__arch_cpu_supports_vm(void) |
| { |
| /* The KVM capability check is enough. */ |
| return true; |
| } |
| |
| void kvm__init_ram(struct kvm *kvm) |
| { |
| int err; |
| u64 phys_start, phys_size; |
| void *host_mem; |
| |
| phys_start = RISCV_RAM; |
| phys_size = kvm->ram_size; |
| host_mem = kvm->ram_start; |
| |
| err = kvm__register_ram(kvm, phys_start, phys_size, host_mem); |
| if (err) |
| die("Failed to register %lld bytes of memory at physical " |
| "address 0x%llx [err %d]", phys_size, phys_start, err); |
| |
| kvm->arch.memory_guest_start = phys_start; |
| } |
| |
| void kvm__arch_delete_ram(struct kvm *kvm) |
| { |
| munmap(kvm->arch.ram_alloc_start, kvm->arch.ram_alloc_size); |
| } |
| |
| void kvm__arch_read_term(struct kvm *kvm) |
| { |
| serial8250__update_consoles(kvm); |
| virtio_console__inject_interrupt(kvm); |
| } |
| |
| void kvm__arch_set_cmdline(char *cmdline, bool video) |
| { |
| } |
| |
| #if __riscv_xlen == 64 |
| #define HUGEPAGE_SIZE SZ_2M |
| #else |
| #define HUGEPAGE_SIZE SZ_4M |
| #endif |
| |
| void kvm__arch_init(struct kvm *kvm) |
| { |
| /* |
| * Allocate guest memory. We must align our buffer to 64K to |
| * correlate with the maximum guest page size for virtio-mmio. |
| * If using THP, then our minimal alignment becomes hugepage |
| * size. The hugepage size is always greater than 64K, so |
| * let's go with that. |
| */ |
| kvm->ram_size = min(kvm->cfg.ram_size, (u64)RISCV_MAX_MEMORY(kvm)); |
| kvm->arch.ram_alloc_size = kvm->ram_size; |
| if (!kvm->cfg.hugetlbfs_path) |
| kvm->arch.ram_alloc_size += HUGEPAGE_SIZE; |
| kvm->arch.ram_alloc_start = mmap_anon_or_hugetlbfs(kvm, |
| kvm->cfg.hugetlbfs_path, |
| kvm->arch.ram_alloc_size); |
| |
| if (kvm->arch.ram_alloc_start == MAP_FAILED) |
| die("Failed to map %lld bytes for guest memory (%d)", |
| kvm->arch.ram_alloc_size, errno); |
| |
| kvm->ram_start = (void *)ALIGN((unsigned long)kvm->arch.ram_alloc_start, |
| SZ_2M); |
| |
| madvise(kvm->arch.ram_alloc_start, kvm->arch.ram_alloc_size, |
| MADV_MERGEABLE); |
| |
| madvise(kvm->arch.ram_alloc_start, kvm->arch.ram_alloc_size, |
| MADV_HUGEPAGE); |
| } |
| |
| #define FDT_ALIGN SZ_4M |
| #define INITRD_ALIGN 8 |
| bool kvm__arch_load_kernel_image(struct kvm *kvm, int fd_kernel, int fd_initrd, |
| const char *kernel_cmdline) |
| { |
| void *pos, *kernel_end, *limit; |
| unsigned long guest_addr, kernel_offset; |
| ssize_t file_size; |
| |
| /* |
| * Linux requires the initrd and dtb to be mapped inside lowmem, |
| * so we can't just place them at the top of memory. |
| */ |
| limit = kvm->ram_start + min(kvm->ram_size, (u64)SZ_256M) - 1; |
| |
| #if __riscv_xlen == 64 |
| /* Linux expects to be booted at 2M boundary for RV64 */ |
| kernel_offset = 0x200000; |
| #else |
| /* Linux expects to be booted at 4M boundary for RV32 */ |
| kernel_offset = 0x400000; |
| #endif |
| |
| pos = kvm->ram_start + kernel_offset; |
| kvm->arch.kern_guest_start = host_to_guest_flat(kvm, pos); |
| file_size = read_file(fd_kernel, pos, limit - pos); |
| if (file_size < 0) { |
| if (errno == ENOMEM) |
| die("kernel image too big to fit in guest memory."); |
| |
| die_perror("kernel read"); |
| } |
| kernel_end = pos + file_size; |
| pr_debug("Loaded kernel to 0x%llx (%zd bytes)", |
| kvm->arch.kern_guest_start, file_size); |
| |
| /* Place FDT just after kernel at FDT_ALIGN address */ |
| pos = kernel_end + FDT_ALIGN; |
| guest_addr = ALIGN(host_to_guest_flat(kvm, pos), FDT_ALIGN); |
| pos = guest_flat_to_host(kvm, guest_addr); |
| if (pos < kernel_end) |
| die("fdt overlaps with kernel image."); |
| |
| kvm->arch.dtb_guest_start = guest_addr; |
| pr_debug("Placing fdt at 0x%llx - 0x%llx", |
| kvm->arch.dtb_guest_start, |
| host_to_guest_flat(kvm, limit)); |
| |
| /* ... and finally the initrd, if we have one. */ |
| if (fd_initrd != -1) { |
| struct stat sb; |
| unsigned long initrd_start; |
| |
| if (fstat(fd_initrd, &sb)) |
| die_perror("fstat"); |
| |
| pos = limit - (sb.st_size + INITRD_ALIGN); |
| guest_addr = ALIGN(host_to_guest_flat(kvm, pos), INITRD_ALIGN); |
| pos = guest_flat_to_host(kvm, guest_addr); |
| if (pos < kernel_end) |
| die("initrd overlaps with kernel image."); |
| |
| initrd_start = guest_addr; |
| file_size = read_file(fd_initrd, pos, limit - pos); |
| if (file_size == -1) { |
| if (errno == ENOMEM) |
| die("initrd too big to fit in guest memory."); |
| |
| die_perror("initrd read"); |
| } |
| |
| kvm->arch.initrd_guest_start = initrd_start; |
| kvm->arch.initrd_size = file_size; |
| pr_debug("Loaded initrd to 0x%llx (%llu bytes)", |
| kvm->arch.initrd_guest_start, |
| kvm->arch.initrd_size); |
| } else { |
| kvm->arch.initrd_size = 0; |
| } |
| |
| return true; |
| } |
| |
| bool kvm__load_firmware(struct kvm *kvm, const char *firmware_filename) |
| { |
| /* TODO: Firmware loading to be supported later. */ |
| return false; |
| } |
| |
| int kvm__arch_setup_firmware(struct kvm *kvm) |
| { |
| return 0; |
| } |