blob: e75d81cf8c211fa6215d5f9b5d8e85effa78928b [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* davinci_nand.c - NAND Flash Driver for DaVinci family chips
*
* Copyright © 2006 Texas Instruments.
*
* Port to 2.6.23 Copyright © 2008 by:
* Sander Huijsen <Shuijsen@optelecom-nkf.com>
* Troy Kisky <troy.kisky@boundarydevices.com>
* Dirk Behme <Dirk.Behme@gmail.com>
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/err.h>
#include <linux/iopoll.h>
#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/platform_data/mtd-davinci.h>
#include <linux/platform_data/mtd-davinci-aemif.h>
/*
* This is a device driver for the NAND flash controller found on the
* various DaVinci family chips. It handles up to four SoC chipselects,
* and some flavors of secondary chipselect (e.g. based on A12) as used
* with multichip packages.
*
* The 1-bit ECC hardware is supported, as well as the newer 4-bit ECC
* available on chips like the DM355 and OMAP-L137 and needed with the
* more error-prone MLC NAND chips.
*
* This driver assumes EM_WAIT connects all the NAND devices' RDY/nBUSY
* outputs in a "wire-AND" configuration, with no per-chip signals.
*/
struct davinci_nand_info {
struct nand_controller controller;
struct nand_chip chip;
struct platform_device *pdev;
bool is_readmode;
void __iomem *base;
void __iomem *vaddr;
void __iomem *current_cs;
uint32_t mask_chipsel;
uint32_t mask_ale;
uint32_t mask_cle;
uint32_t core_chipsel;
struct davinci_aemif_timing *timing;
};
static DEFINE_SPINLOCK(davinci_nand_lock);
static bool ecc4_busy;
static inline struct davinci_nand_info *to_davinci_nand(struct mtd_info *mtd)
{
return container_of(mtd_to_nand(mtd), struct davinci_nand_info, chip);
}
static inline unsigned int davinci_nand_readl(struct davinci_nand_info *info,
int offset)
{
return __raw_readl(info->base + offset);
}
static inline void davinci_nand_writel(struct davinci_nand_info *info,
int offset, unsigned long value)
{
__raw_writel(value, info->base + offset);
}
/*----------------------------------------------------------------------*/
/*
* 1-bit hardware ECC ... context maintained for each core chipselect
*/
static inline uint32_t nand_davinci_readecc_1bit(struct mtd_info *mtd)
{
struct davinci_nand_info *info = to_davinci_nand(mtd);
return davinci_nand_readl(info, NANDF1ECC_OFFSET
+ 4 * info->core_chipsel);
}
static void nand_davinci_hwctl_1bit(struct nand_chip *chip, int mode)
{
struct davinci_nand_info *info;
uint32_t nandcfr;
unsigned long flags;
info = to_davinci_nand(nand_to_mtd(chip));
/* Reset ECC hardware */
nand_davinci_readecc_1bit(nand_to_mtd(chip));
spin_lock_irqsave(&davinci_nand_lock, flags);
/* Restart ECC hardware */
nandcfr = davinci_nand_readl(info, NANDFCR_OFFSET);
nandcfr |= BIT(8 + info->core_chipsel);
davinci_nand_writel(info, NANDFCR_OFFSET, nandcfr);
spin_unlock_irqrestore(&davinci_nand_lock, flags);
}
/*
* Read hardware ECC value and pack into three bytes
*/
static int nand_davinci_calculate_1bit(struct nand_chip *chip,
const u_char *dat, u_char *ecc_code)
{
unsigned int ecc_val = nand_davinci_readecc_1bit(nand_to_mtd(chip));
unsigned int ecc24 = (ecc_val & 0x0fff) | ((ecc_val & 0x0fff0000) >> 4);
/* invert so that erased block ecc is correct */
ecc24 = ~ecc24;
ecc_code[0] = (u_char)(ecc24);
ecc_code[1] = (u_char)(ecc24 >> 8);
ecc_code[2] = (u_char)(ecc24 >> 16);
return 0;
}
static int nand_davinci_correct_1bit(struct nand_chip *chip, u_char *dat,
u_char *read_ecc, u_char *calc_ecc)
{
uint32_t eccNand = read_ecc[0] | (read_ecc[1] << 8) |
(read_ecc[2] << 16);
uint32_t eccCalc = calc_ecc[0] | (calc_ecc[1] << 8) |
(calc_ecc[2] << 16);
uint32_t diff = eccCalc ^ eccNand;
if (diff) {
if ((((diff >> 12) ^ diff) & 0xfff) == 0xfff) {
/* Correctable error */
if ((diff >> (12 + 3)) < chip->ecc.size) {
dat[diff >> (12 + 3)] ^= BIT((diff >> 12) & 7);
return 1;
} else {
return -EBADMSG;
}
} else if (!(diff & (diff - 1))) {
/* Single bit ECC error in the ECC itself,
* nothing to fix */
return 1;
} else {
/* Uncorrectable error */
return -EBADMSG;
}
}
return 0;
}
/*----------------------------------------------------------------------*/
/*
* 4-bit hardware ECC ... context maintained over entire AEMIF
*
* This is a syndrome engine, but we avoid NAND_ECC_PLACEMENT_INTERLEAVED
* since that forces use of a problematic "infix OOB" layout.
* Among other things, it trashes manufacturer bad block markers.
* Also, and specific to this hardware, it ECC-protects the "prepad"
* in the OOB ... while having ECC protection for parts of OOB would
* seem useful, the current MTD stack sometimes wants to update the
* OOB without recomputing ECC.
*/
static void nand_davinci_hwctl_4bit(struct nand_chip *chip, int mode)
{
struct davinci_nand_info *info = to_davinci_nand(nand_to_mtd(chip));
unsigned long flags;
u32 val;
/* Reset ECC hardware */
davinci_nand_readl(info, NAND_4BIT_ECC1_OFFSET);
spin_lock_irqsave(&davinci_nand_lock, flags);
/* Start 4-bit ECC calculation for read/write */
val = davinci_nand_readl(info, NANDFCR_OFFSET);
val &= ~(0x03 << 4);
val |= (info->core_chipsel << 4) | BIT(12);
davinci_nand_writel(info, NANDFCR_OFFSET, val);
info->is_readmode = (mode == NAND_ECC_READ);
spin_unlock_irqrestore(&davinci_nand_lock, flags);
}
/* Read raw ECC code after writing to NAND. */
static void
nand_davinci_readecc_4bit(struct davinci_nand_info *info, u32 code[4])
{
const u32 mask = 0x03ff03ff;
code[0] = davinci_nand_readl(info, NAND_4BIT_ECC1_OFFSET) & mask;
code[1] = davinci_nand_readl(info, NAND_4BIT_ECC2_OFFSET) & mask;
code[2] = davinci_nand_readl(info, NAND_4BIT_ECC3_OFFSET) & mask;
code[3] = davinci_nand_readl(info, NAND_4BIT_ECC4_OFFSET) & mask;
}
/* Terminate read ECC; or return ECC (as bytes) of data written to NAND. */
static int nand_davinci_calculate_4bit(struct nand_chip *chip,
const u_char *dat, u_char *ecc_code)
{
struct davinci_nand_info *info = to_davinci_nand(nand_to_mtd(chip));
u32 raw_ecc[4], *p;
unsigned i;
/* After a read, terminate ECC calculation by a dummy read
* of some 4-bit ECC register. ECC covers everything that
* was read; correct() just uses the hardware state, so
* ecc_code is not needed.
*/
if (info->is_readmode) {
davinci_nand_readl(info, NAND_4BIT_ECC1_OFFSET);
return 0;
}
/* Pack eight raw 10-bit ecc values into ten bytes, making
* two passes which each convert four values (in upper and
* lower halves of two 32-bit words) into five bytes. The
* ROM boot loader uses this same packing scheme.
*/
nand_davinci_readecc_4bit(info, raw_ecc);
for (i = 0, p = raw_ecc; i < 2; i++, p += 2) {
*ecc_code++ = p[0] & 0xff;
*ecc_code++ = ((p[0] >> 8) & 0x03) | ((p[0] >> 14) & 0xfc);
*ecc_code++ = ((p[0] >> 22) & 0x0f) | ((p[1] << 4) & 0xf0);
*ecc_code++ = ((p[1] >> 4) & 0x3f) | ((p[1] >> 10) & 0xc0);
*ecc_code++ = (p[1] >> 18) & 0xff;
}
return 0;
}
/* Correct up to 4 bits in data we just read, using state left in the
* hardware plus the ecc_code computed when it was first written.
*/
static int nand_davinci_correct_4bit(struct nand_chip *chip, u_char *data,
u_char *ecc_code, u_char *null)
{
int i;
struct davinci_nand_info *info = to_davinci_nand(nand_to_mtd(chip));
unsigned short ecc10[8];
unsigned short *ecc16;
u32 syndrome[4];
u32 ecc_state;
unsigned num_errors, corrected;
unsigned long timeo;
/* Unpack ten bytes into eight 10 bit values. We know we're
* little-endian, and use type punning for less shifting/masking.
*/
if (WARN_ON(0x01 & (uintptr_t)ecc_code))
return -EINVAL;
ecc16 = (unsigned short *)ecc_code;
ecc10[0] = (ecc16[0] >> 0) & 0x3ff;
ecc10[1] = ((ecc16[0] >> 10) & 0x3f) | ((ecc16[1] << 6) & 0x3c0);
ecc10[2] = (ecc16[1] >> 4) & 0x3ff;
ecc10[3] = ((ecc16[1] >> 14) & 0x3) | ((ecc16[2] << 2) & 0x3fc);
ecc10[4] = (ecc16[2] >> 8) | ((ecc16[3] << 8) & 0x300);
ecc10[5] = (ecc16[3] >> 2) & 0x3ff;
ecc10[6] = ((ecc16[3] >> 12) & 0xf) | ((ecc16[4] << 4) & 0x3f0);
ecc10[7] = (ecc16[4] >> 6) & 0x3ff;
/* Tell ECC controller about the expected ECC codes. */
for (i = 7; i >= 0; i--)
davinci_nand_writel(info, NAND_4BIT_ECC_LOAD_OFFSET, ecc10[i]);
/* Allow time for syndrome calculation ... then read it.
* A syndrome of all zeroes 0 means no detected errors.
*/
davinci_nand_readl(info, NANDFSR_OFFSET);
nand_davinci_readecc_4bit(info, syndrome);
if (!(syndrome[0] | syndrome[1] | syndrome[2] | syndrome[3]))
return 0;
/*
* Clear any previous address calculation by doing a dummy read of an
* error address register.
*/
davinci_nand_readl(info, NAND_ERR_ADD1_OFFSET);
/* Start address calculation, and wait for it to complete.
* We _could_ start reading more data while this is working,
* to speed up the overall page read.
*/
davinci_nand_writel(info, NANDFCR_OFFSET,
davinci_nand_readl(info, NANDFCR_OFFSET) | BIT(13));
/*
* ECC_STATE field reads 0x3 (Error correction complete) immediately
* after setting the 4BITECC_ADD_CALC_START bit. So if you immediately
* begin trying to poll for the state, you may fall right out of your
* loop without any of the correction calculations having taken place.
* The recommendation from the hardware team is to initially delay as
* long as ECC_STATE reads less than 4. After that, ECC HW has entered
* correction state.
*/
timeo = jiffies + usecs_to_jiffies(100);
do {
ecc_state = (davinci_nand_readl(info,
NANDFSR_OFFSET) >> 8) & 0x0f;
cpu_relax();
} while ((ecc_state < 4) && time_before(jiffies, timeo));
for (;;) {
u32 fsr = davinci_nand_readl(info, NANDFSR_OFFSET);
switch ((fsr >> 8) & 0x0f) {
case 0: /* no error, should not happen */
davinci_nand_readl(info, NAND_ERR_ERRVAL1_OFFSET);
return 0;
case 1: /* five or more errors detected */
davinci_nand_readl(info, NAND_ERR_ERRVAL1_OFFSET);
return -EBADMSG;
case 2: /* error addresses computed */
case 3:
num_errors = 1 + ((fsr >> 16) & 0x03);
goto correct;
default: /* still working on it */
cpu_relax();
continue;
}
}
correct:
/* correct each error */
for (i = 0, corrected = 0; i < num_errors; i++) {
int error_address, error_value;
if (i > 1) {
error_address = davinci_nand_readl(info,
NAND_ERR_ADD2_OFFSET);
error_value = davinci_nand_readl(info,
NAND_ERR_ERRVAL2_OFFSET);
} else {
error_address = davinci_nand_readl(info,
NAND_ERR_ADD1_OFFSET);
error_value = davinci_nand_readl(info,
NAND_ERR_ERRVAL1_OFFSET);
}
if (i & 1) {
error_address >>= 16;
error_value >>= 16;
}
error_address &= 0x3ff;
error_address = (512 + 7) - error_address;
if (error_address < 512) {
data[error_address] ^= error_value;
corrected++;
}
}
return corrected;
}
/*----------------------------------------------------------------------*/
/* An ECC layout for using 4-bit ECC with small-page flash, storing
* ten ECC bytes plus the manufacturer's bad block marker byte, and
* and not overlapping the default BBT markers.
*/
static int hwecc4_ooblayout_small_ecc(struct mtd_info *mtd, int section,
struct mtd_oob_region *oobregion)
{
if (section > 2)
return -ERANGE;
if (!section) {
oobregion->offset = 0;
oobregion->length = 5;
} else if (section == 1) {
oobregion->offset = 6;
oobregion->length = 2;
} else {
oobregion->offset = 13;
oobregion->length = 3;
}
return 0;
}
static int hwecc4_ooblayout_small_free(struct mtd_info *mtd, int section,
struct mtd_oob_region *oobregion)
{
if (section > 1)
return -ERANGE;
if (!section) {
oobregion->offset = 8;
oobregion->length = 5;
} else {
oobregion->offset = 16;
oobregion->length = mtd->oobsize - 16;
}
return 0;
}
static const struct mtd_ooblayout_ops hwecc4_small_ooblayout_ops = {
.ecc = hwecc4_ooblayout_small_ecc,
.free = hwecc4_ooblayout_small_free,
};
#if defined(CONFIG_OF)
static const struct of_device_id davinci_nand_of_match[] = {
{.compatible = "ti,davinci-nand", },
{.compatible = "ti,keystone-nand", },
{},
};
MODULE_DEVICE_TABLE(of, davinci_nand_of_match);
static struct davinci_nand_pdata
*nand_davinci_get_pdata(struct platform_device *pdev)
{
if (!dev_get_platdata(&pdev->dev) && pdev->dev.of_node) {
struct davinci_nand_pdata *pdata;
const char *mode;
u32 prop;
pdata = devm_kzalloc(&pdev->dev,
sizeof(struct davinci_nand_pdata),
GFP_KERNEL);
pdev->dev.platform_data = pdata;
if (!pdata)
return ERR_PTR(-ENOMEM);
if (!of_property_read_u32(pdev->dev.of_node,
"ti,davinci-chipselect", &prop))
pdata->core_chipsel = prop;
else
return ERR_PTR(-EINVAL);
if (!of_property_read_u32(pdev->dev.of_node,
"ti,davinci-mask-ale", &prop))
pdata->mask_ale = prop;
if (!of_property_read_u32(pdev->dev.of_node,
"ti,davinci-mask-cle", &prop))
pdata->mask_cle = prop;
if (!of_property_read_u32(pdev->dev.of_node,
"ti,davinci-mask-chipsel", &prop))
pdata->mask_chipsel = prop;
if (!of_property_read_string(pdev->dev.of_node,
"ti,davinci-ecc-mode", &mode)) {
if (!strncmp("none", mode, 4))
pdata->engine_type = NAND_ECC_ENGINE_TYPE_NONE;
if (!strncmp("soft", mode, 4))
pdata->engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
if (!strncmp("hw", mode, 2))
pdata->engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
}
if (!of_property_read_u32(pdev->dev.of_node,
"ti,davinci-ecc-bits", &prop))
pdata->ecc_bits = prop;
if (!of_property_read_u32(pdev->dev.of_node,
"ti,davinci-nand-buswidth", &prop) && prop == 16)
pdata->options |= NAND_BUSWIDTH_16;
if (of_property_read_bool(pdev->dev.of_node,
"ti,davinci-nand-use-bbt"))
pdata->bbt_options = NAND_BBT_USE_FLASH;
/*
* Since kernel v4.8, this driver has been fixed to enable
* use of 4-bit hardware ECC with subpages and verified on
* TI's keystone EVMs (K2L, K2HK and K2E).
* However, in the interest of not breaking systems using
* existing UBI partitions, sub-page writes are not being
* (re)enabled. If you want to use subpage writes on Keystone
* platforms (i.e. do not have any existing UBI partitions),
* then use "ti,davinci-nand" as the compatible in your
* device-tree file.
*/
if (of_device_is_compatible(pdev->dev.of_node,
"ti,keystone-nand")) {
pdata->options |= NAND_NO_SUBPAGE_WRITE;
}
}
return dev_get_platdata(&pdev->dev);
}
#else
static struct davinci_nand_pdata
*nand_davinci_get_pdata(struct platform_device *pdev)
{
return dev_get_platdata(&pdev->dev);
}
#endif
static int davinci_nand_attach_chip(struct nand_chip *chip)
{
struct mtd_info *mtd = nand_to_mtd(chip);
struct davinci_nand_info *info = to_davinci_nand(mtd);
struct davinci_nand_pdata *pdata = nand_davinci_get_pdata(info->pdev);
int ret = 0;
if (IS_ERR(pdata))
return PTR_ERR(pdata);
/* Use board-specific ECC config */
chip->ecc.engine_type = pdata->engine_type;
chip->ecc.placement = pdata->ecc_placement;
switch (chip->ecc.engine_type) {
case NAND_ECC_ENGINE_TYPE_NONE:
pdata->ecc_bits = 0;
break;
case NAND_ECC_ENGINE_TYPE_SOFT:
pdata->ecc_bits = 0;
/*
* This driver expects Hamming based ECC when engine_type is set
* to NAND_ECC_ENGINE_TYPE_SOFT. Force ecc.algo to
* NAND_ECC_ALGO_HAMMING to avoid adding an extra ->ecc_algo
* field to davinci_nand_pdata.
*/
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
break;
case NAND_ECC_ENGINE_TYPE_ON_HOST:
if (pdata->ecc_bits == 4) {
int chunks = mtd->writesize / 512;
if (!chunks || mtd->oobsize < 16) {
dev_dbg(&info->pdev->dev, "too small\n");
return -EINVAL;
}
/*
* No sanity checks: CPUs must support this,
* and the chips may not use NAND_BUSWIDTH_16.
*/
/* No sharing 4-bit hardware between chipselects yet */
spin_lock_irq(&davinci_nand_lock);
if (ecc4_busy)
ret = -EBUSY;
else
ecc4_busy = true;
spin_unlock_irq(&davinci_nand_lock);
if (ret == -EBUSY)
return ret;
chip->ecc.calculate = nand_davinci_calculate_4bit;
chip->ecc.correct = nand_davinci_correct_4bit;
chip->ecc.hwctl = nand_davinci_hwctl_4bit;
chip->ecc.bytes = 10;
chip->ecc.options = NAND_ECC_GENERIC_ERASED_CHECK;
chip->ecc.algo = NAND_ECC_ALGO_BCH;
/*
* Update ECC layout if needed ... for 1-bit HW ECC, the
* default is OK, but it allocates 6 bytes when only 3
* are needed (for each 512 bytes). For 4-bit HW ECC,
* the default is not usable: 10 bytes needed, not 6.
*
* For small page chips, preserve the manufacturer's
* badblock marking data ... and make sure a flash BBT
* table marker fits in the free bytes.
*/
if (chunks == 1) {
mtd_set_ooblayout(mtd,
&hwecc4_small_ooblayout_ops);
} else if (chunks == 4 || chunks == 8) {
mtd_set_ooblayout(mtd,
nand_get_large_page_ooblayout());
chip->ecc.read_page = nand_read_page_hwecc_oob_first;
} else {
return -EIO;
}
} else {
/* 1bit ecc hamming */
chip->ecc.calculate = nand_davinci_calculate_1bit;
chip->ecc.correct = nand_davinci_correct_1bit;
chip->ecc.hwctl = nand_davinci_hwctl_1bit;
chip->ecc.bytes = 3;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
chip->ecc.size = 512;
chip->ecc.strength = pdata->ecc_bits;
break;
default:
return -EINVAL;
}
return ret;
}
static void nand_davinci_data_in(struct davinci_nand_info *info, void *buf,
unsigned int len, bool force_8bit)
{
u32 alignment = ((uintptr_t)buf | len) & 3;
if (force_8bit || (alignment & 1))
ioread8_rep(info->current_cs, buf, len);
else if (alignment & 3)
ioread16_rep(info->current_cs, buf, len >> 1);
else
ioread32_rep(info->current_cs, buf, len >> 2);
}
static void nand_davinci_data_out(struct davinci_nand_info *info,
const void *buf, unsigned int len,
bool force_8bit)
{
u32 alignment = ((uintptr_t)buf | len) & 3;
if (force_8bit || (alignment & 1))
iowrite8_rep(info->current_cs, buf, len);
else if (alignment & 3)
iowrite16_rep(info->current_cs, buf, len >> 1);
else
iowrite32_rep(info->current_cs, buf, len >> 2);
}
static int davinci_nand_exec_instr(struct davinci_nand_info *info,
const struct nand_op_instr *instr)
{
unsigned int i, timeout_us;
u32 status;
int ret;
switch (instr->type) {
case NAND_OP_CMD_INSTR:
iowrite8(instr->ctx.cmd.opcode,
info->current_cs + info->mask_cle);
break;
case NAND_OP_ADDR_INSTR:
for (i = 0; i < instr->ctx.addr.naddrs; i++) {
iowrite8(instr->ctx.addr.addrs[i],
info->current_cs + info->mask_ale);
}
break;
case NAND_OP_DATA_IN_INSTR:
nand_davinci_data_in(info, instr->ctx.data.buf.in,
instr->ctx.data.len,
instr->ctx.data.force_8bit);
break;
case NAND_OP_DATA_OUT_INSTR:
nand_davinci_data_out(info, instr->ctx.data.buf.out,
instr->ctx.data.len,
instr->ctx.data.force_8bit);
break;
case NAND_OP_WAITRDY_INSTR:
timeout_us = instr->ctx.waitrdy.timeout_ms * 1000;
ret = readl_relaxed_poll_timeout(info->base + NANDFSR_OFFSET,
status, status & BIT(0), 100,
timeout_us);
if (ret)
return ret;
break;
}
if (instr->delay_ns)
ndelay(instr->delay_ns);
return 0;
}
static int davinci_nand_exec_op(struct nand_chip *chip,
const struct nand_operation *op,
bool check_only)
{
struct davinci_nand_info *info = to_davinci_nand(nand_to_mtd(chip));
unsigned int i;
if (check_only)
return 0;
info->current_cs = info->vaddr + (op->cs * info->mask_chipsel);
for (i = 0; i < op->ninstrs; i++) {
int ret;
ret = davinci_nand_exec_instr(info, &op->instrs[i]);
if (ret)
return ret;
}
return 0;
}
static const struct nand_controller_ops davinci_nand_controller_ops = {
.attach_chip = davinci_nand_attach_chip,
.exec_op = davinci_nand_exec_op,
};
static int nand_davinci_probe(struct platform_device *pdev)
{
struct davinci_nand_pdata *pdata;
struct davinci_nand_info *info;
struct resource *res1;
struct resource *res2;
void __iomem *vaddr;
void __iomem *base;
int ret;
uint32_t val;
struct mtd_info *mtd;
pdata = nand_davinci_get_pdata(pdev);
if (IS_ERR(pdata))
return PTR_ERR(pdata);
/* insist on board-specific configuration */
if (!pdata)
return -ENODEV;
/* which external chipselect will we be managing? */
if (pdata->core_chipsel > 3)
return -ENODEV;
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
platform_set_drvdata(pdev, info);
res1 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
res2 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
if (!res1 || !res2) {
dev_err(&pdev->dev, "resource missing\n");
return -EINVAL;
}
vaddr = devm_ioremap_resource(&pdev->dev, res1);
if (IS_ERR(vaddr))
return PTR_ERR(vaddr);
/*
* This registers range is used to setup NAND settings. In case with
* TI AEMIF driver, the same memory address range is requested already
* by AEMIF, so we cannot request it twice, just ioremap.
* The AEMIF and NAND drivers not use the same registers in this range.
*/
base = devm_ioremap(&pdev->dev, res2->start, resource_size(res2));
if (!base) {
dev_err(&pdev->dev, "ioremap failed for resource %pR\n", res2);
return -EADDRNOTAVAIL;
}
info->pdev = pdev;
info->base = base;
info->vaddr = vaddr;
mtd = nand_to_mtd(&info->chip);
mtd->dev.parent = &pdev->dev;
nand_set_flash_node(&info->chip, pdev->dev.of_node);
/* options such as NAND_BBT_USE_FLASH */
info->chip.bbt_options = pdata->bbt_options;
/* options such as 16-bit widths */
info->chip.options = pdata->options;
info->chip.bbt_td = pdata->bbt_td;
info->chip.bbt_md = pdata->bbt_md;
info->timing = pdata->timing;
info->current_cs = info->vaddr;
info->core_chipsel = pdata->core_chipsel;
info->mask_chipsel = pdata->mask_chipsel;
/* use nandboot-capable ALE/CLE masks by default */
info->mask_ale = pdata->mask_ale ? : MASK_ALE;
info->mask_cle = pdata->mask_cle ? : MASK_CLE;
spin_lock_irq(&davinci_nand_lock);
/* put CSxNAND into NAND mode */
val = davinci_nand_readl(info, NANDFCR_OFFSET);
val |= BIT(info->core_chipsel);
davinci_nand_writel(info, NANDFCR_OFFSET, val);
spin_unlock_irq(&davinci_nand_lock);
/* Scan to find existence of the device(s) */
nand_controller_init(&info->controller);
info->controller.ops = &davinci_nand_controller_ops;
info->chip.controller = &info->controller;
ret = nand_scan(&info->chip, pdata->mask_chipsel ? 2 : 1);
if (ret < 0) {
dev_dbg(&pdev->dev, "no NAND chip(s) found\n");
return ret;
}
if (pdata->parts)
ret = mtd_device_register(mtd, pdata->parts, pdata->nr_parts);
else
ret = mtd_device_register(mtd, NULL, 0);
if (ret < 0)
goto err_cleanup_nand;
val = davinci_nand_readl(info, NRCSR_OFFSET);
dev_info(&pdev->dev, "controller rev. %d.%d\n",
(val >> 8) & 0xff, val & 0xff);
return 0;
err_cleanup_nand:
nand_cleanup(&info->chip);
return ret;
}
static void nand_davinci_remove(struct platform_device *pdev)
{
struct davinci_nand_info *info = platform_get_drvdata(pdev);
struct nand_chip *chip = &info->chip;
int ret;
spin_lock_irq(&davinci_nand_lock);
if (chip->ecc.placement == NAND_ECC_PLACEMENT_INTERLEAVED)
ecc4_busy = false;
spin_unlock_irq(&davinci_nand_lock);
ret = mtd_device_unregister(nand_to_mtd(chip));
WARN_ON(ret);
nand_cleanup(chip);
}
static struct platform_driver nand_davinci_driver = {
.probe = nand_davinci_probe,
.remove_new = nand_davinci_remove,
.driver = {
.name = "davinci_nand",
.of_match_table = of_match_ptr(davinci_nand_of_match),
},
};
MODULE_ALIAS("platform:davinci_nand");
module_platform_driver(nand_davinci_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Texas Instruments");
MODULE_DESCRIPTION("Davinci NAND flash driver");