blob: 4ada60fbf81de40070f4f92838b4dcb4b200a928 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/mtd/qcom,nandc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm NAND controller
maintainers:
- Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
properties:
compatible:
enum:
- qcom,ipq806x-nand
- qcom,ipq4019-nand
- qcom,ipq6018-nand
- qcom,ipq8074-nand
- qcom,sdx55-nand
reg:
maxItems: 1
clocks:
items:
- description: Core Clock
- description: Always ON Clock
clock-names:
items:
- const: core
- const: aon
patternProperties:
"^nand@[a-f0-9]$":
type: object
$ref: raw-nand-chip.yaml
properties:
nand-bus-width:
const: 8
nand-ecc-strength:
enum: [1, 4, 8]
nand-ecc-step-size:
enum:
- 512
qcom,boot-partitions:
$ref: /schemas/types.yaml#/definitions/uint32-matrix
items:
items:
- description: offset
- description: size
description:
Boot partition use a different layout where the 4 bytes of spare
data are not protected by ECC. Use this to declare these special
partitions by defining first the offset and then the size.
It's in the form of <offset1 size1 offset2 size2 offset3 ...>
and should be declared in ascending order.
Refer to the ipq8064 example on how to use this special binding.
unevaluatedProperties: false
allOf:
- $ref: nand-controller.yaml#
- if:
properties:
compatible:
contains:
const: qcom,ipq806x-nand
then:
properties:
dmas:
items:
- description: rxtx DMA channel
dma-names:
items:
- const: rxtx
qcom,cmd-crci:
$ref: /schemas/types.yaml#/definitions/uint32
description:
Must contain the ADM command type CRCI block instance number
specified for the NAND controller on the given platform
qcom,data-crci:
$ref: /schemas/types.yaml#/definitions/uint32
description:
Must contain the ADM data type CRCI block instance number
specified for the NAND controller on the given platform
- if:
properties:
compatible:
contains:
enum:
- qcom,ipq4019-nand
- qcom,ipq6018-nand
- qcom,ipq8074-nand
- qcom,sdx55-nand
then:
properties:
dmas:
items:
- description: tx DMA channel
- description: rx DMA channel
- description: cmd DMA channel
dma-names:
items:
- const: tx
- const: rx
- const: cmd
- if:
properties:
compatible:
contains:
enum:
- qcom,ipq806x-nand
then:
patternProperties:
"^nand@[a-f0-9]$":
properties:
qcom,boot-partitions: true
else:
patternProperties:
"^nand@[a-f0-9]$":
properties:
qcom,boot-partitions: false
required:
- compatible
- reg
- clocks
- clock-names
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
nand-controller@1ac00000 {
compatible = "qcom,ipq806x-nand";
reg = <0x1ac00000 0x800>;
clocks = <&gcc EBI2_CLK>,
<&gcc EBI2_AON_CLK>;
clock-names = "core", "aon";
dmas = <&adm_dma 3>;
dma-names = "rxtx";
qcom,cmd-crci = <15>;
qcom,data-crci = <3>;
#address-cells = <1>;
#size-cells = <0>;
nand@0 {
reg = <0>;
nand-ecc-strength = <4>;
nand-bus-width = <8>;
qcom,boot-partitions = <0x0 0x58a0000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "boot-nand";
reg = <0 0x58a0000>;
};
partition@58a0000 {
label = "fs-nand";
reg = <0x58a0000 0x4000000>;
};
};
};
};
#include <dt-bindings/clock/qcom,gcc-ipq4019.h>
nand-controller@79b0000 {
compatible = "qcom,ipq4019-nand";
reg = <0x79b0000 0x1000>;
clocks = <&gcc GCC_QPIC_CLK>,
<&gcc GCC_QPIC_AHB_CLK>;
clock-names = "core", "aon";
dmas = <&qpicbam 0>,
<&qpicbam 1>,
<&qpicbam 2>;
dma-names = "tx", "rx", "cmd";
#address-cells = <1>;
#size-cells = <0>;
nand@0 {
reg = <0>;
nand-ecc-strength = <4>;
nand-bus-width = <8>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "boot-nand";
reg = <0 0x58a0000>;
};
partition@58a0000 {
label = "fs-nand";
reg = <0x58a0000 0x4000000>;
};
};
};
};
...