| /* SPDX-License-Identifier: GPL-2.0-only */ |
| /* |
| * OMAP2xxx/3xxx-common Power/Reset Management (PRM) register definitions |
| * |
| * Copyright (C) 2007-2009, 2011-2012 Texas Instruments, Inc. |
| * Copyright (C) 2008-2010 Nokia Corporation |
| * Paul Walmsley |
| * |
| * The PRM hardware modules on the OMAP2/3 are quite similar to each |
| * other. The PRM on OMAP4 has a new register layout, and is handled |
| * in a separate file. |
| */ |
| #ifndef __ARCH_ARM_MACH_OMAP2_PRM2XXX_3XXX_H |
| #define __ARCH_ARM_MACH_OMAP2_PRM2XXX_3XXX_H |
| |
| #include "prcm-common.h" |
| #include "prm.h" |
| |
| /* |
| * Module specific PRM register offsets from PRM_BASE + domain offset |
| * |
| * Use prm_{read,write}_mod_reg() with these registers. |
| * |
| * With a few exceptions, these are the register names beginning with |
| * {PM,RM}_* on both OMAP2/3 SoC families.. (The exceptions are the |
| * IRQSTATUS and IRQENABLE bits.) |
| */ |
| |
| /* Register offsets appearing on both OMAP2 and OMAP3 */ |
| |
| #define OMAP2_RM_RSTCTRL 0x0050 |
| #define OMAP2_RM_RSTTIME 0x0054 |
| #define OMAP2_RM_RSTST 0x0058 |
| #define OMAP2_PM_PWSTCTRL 0x00e0 |
| #define OMAP2_PM_PWSTST 0x00e4 |
| |
| #define PM_WKEN 0x00a0 |
| #define PM_WKEN1 PM_WKEN |
| #define PM_WKST 0x00b0 |
| #define PM_WKST1 PM_WKST |
| #define PM_WKDEP 0x00c8 |
| #define PM_EVGENCTRL 0x00d4 |
| #define PM_EVGENONTIM 0x00d8 |
| #define PM_EVGENOFFTIM 0x00dc |
| |
| |
| #ifndef __ASSEMBLER__ |
| |
| #include <linux/io.h> |
| #include "powerdomain.h" |
| |
| /* Power/reset management domain register get/set */ |
| static inline u32 omap2_prm_read_mod_reg(s16 module, u16 idx) |
| { |
| return readl_relaxed(prm_base.va + module + idx); |
| } |
| |
| static inline void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx) |
| { |
| writel_relaxed(val, prm_base.va + module + idx); |
| } |
| |
| /* Read-modify-write a register in a PRM module. Caller must lock */ |
| static inline u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, |
| s16 idx) |
| { |
| u32 v; |
| |
| v = omap2_prm_read_mod_reg(module, idx); |
| v &= ~mask; |
| v |= bits; |
| omap2_prm_write_mod_reg(v, module, idx); |
| |
| return v; |
| } |
| |
| /* Read a PRM register, AND it, and shift the result down to bit 0 */ |
| static inline u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask) |
| { |
| u32 v; |
| |
| v = omap2_prm_read_mod_reg(domain, idx); |
| v &= mask; |
| v >>= __ffs(mask); |
| |
| return v; |
| } |
| |
| static inline u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx) |
| { |
| return omap2_prm_rmw_mod_reg_bits(bits, bits, module, idx); |
| } |
| |
| static inline u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) |
| { |
| return omap2_prm_rmw_mod_reg_bits(bits, 0x0, module, idx); |
| } |
| |
| /* These omap2_ PRM functions apply to both OMAP2 and 3 */ |
| int omap2_prm_is_hardreset_asserted(u8 shift, u8 part, s16 prm_mod, u16 offset); |
| int omap2_prm_assert_hardreset(u8 shift, u8 part, s16 prm_mod, |
| u16 offset); |
| int omap2_prm_deassert_hardreset(u8 rst_shift, u8 st_shift, u8 part, |
| s16 prm_mod, u16 reset_offset, |
| u16 st_offset); |
| |
| extern int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, |
| u8 pwrst); |
| extern int omap2_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, |
| u8 pwrst); |
| extern int omap2_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank); |
| extern int omap2_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank); |
| extern int omap2_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst); |
| extern int omap2_pwrdm_wait_transition(struct powerdomain *pwrdm); |
| |
| extern int omap2_clkdm_add_wkdep(struct clockdomain *clkdm1, |
| struct clockdomain *clkdm2); |
| extern int omap2_clkdm_del_wkdep(struct clockdomain *clkdm1, |
| struct clockdomain *clkdm2); |
| extern int omap2_clkdm_read_wkdep(struct clockdomain *clkdm1, |
| struct clockdomain *clkdm2); |
| extern int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm); |
| |
| #endif /* __ASSEMBLER */ |
| |
| /* |
| * Bits common to specific registers |
| * |
| * The 3430 register and bit names are generally used, |
| * since they tend to make more sense |
| */ |
| |
| /* PM_EVGENONTIM_MPU */ |
| /* Named PM_EVEGENONTIM_MPU on the 24XX */ |
| #define OMAP_ONTIMEVAL_SHIFT 0 |
| #define OMAP_ONTIMEVAL_MASK (0xffffffff << 0) |
| |
| /* PM_EVGENOFFTIM_MPU */ |
| /* Named PM_EVEGENOFFTIM_MPU on the 24XX */ |
| #define OMAP_OFFTIMEVAL_SHIFT 0 |
| #define OMAP_OFFTIMEVAL_MASK (0xffffffff << 0) |
| |
| /* PRM_CLKSETUP and PRCM_VOLTSETUP */ |
| /* Named PRCM_CLKSSETUP on the 24XX */ |
| #define OMAP_SETUP_TIME_SHIFT 0 |
| #define OMAP_SETUP_TIME_MASK (0xffff << 0) |
| |
| /* PRM_CLKSRC_CTRL */ |
| /* Named PRCM_CLKSRC_CTRL on the 24XX */ |
| #define OMAP_SYSCLKDIV_SHIFT 6 |
| #define OMAP_SYSCLKDIV_MASK (0x3 << 6) |
| #define OMAP_SYSCLKDIV_WIDTH 2 |
| #define OMAP_AUTOEXTCLKMODE_SHIFT 3 |
| #define OMAP_AUTOEXTCLKMODE_MASK (0x3 << 3) |
| #define OMAP_SYSCLKSEL_SHIFT 0 |
| #define OMAP_SYSCLKSEL_MASK (0x3 << 0) |
| |
| /* PM_EVGENCTRL_MPU */ |
| #define OMAP_OFFLOADMODE_SHIFT 3 |
| #define OMAP_OFFLOADMODE_MASK (0x3 << 3) |
| #define OMAP_ONLOADMODE_SHIFT 1 |
| #define OMAP_ONLOADMODE_MASK (0x3 << 1) |
| #define OMAP_ENABLE_MASK (1 << 0) |
| |
| /* PRM_RSTTIME */ |
| /* Named RM_RSTTIME_WKUP on the 24xx */ |
| #define OMAP_RSTTIME2_SHIFT 8 |
| #define OMAP_RSTTIME2_MASK (0x1f << 8) |
| #define OMAP_RSTTIME1_SHIFT 0 |
| #define OMAP_RSTTIME1_MASK (0xff << 0) |
| |
| /* PRM_RSTCTRL */ |
| /* Named RM_RSTCTRL_WKUP on the 24xx */ |
| /* 2420 calls RST_DPLL3 'RST_DPLL' */ |
| #define OMAP_RST_DPLL3_MASK (1 << 2) |
| #define OMAP_RST_GS_MASK (1 << 1) |
| |
| |
| /* |
| * Bits common to module-shared registers |
| * |
| * Not all registers of a particular type support all of these bits - |
| * check TRM if you are unsure |
| */ |
| |
| /* |
| * 24XX: RM_RSTST_MPU and RM_RSTST_DSP - on 24XX, 'COREDOMAINWKUP_RST' is |
| * called 'COREWKUP_RST' |
| * |
| * 3430: RM_RSTST_IVA2, RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSS, |
| * RM_RSTST_CAM, RM_RSTST_PER, RM_RSTST_NEON |
| */ |
| #define OMAP_COREDOMAINWKUP_RST_MASK (1 << 3) |
| |
| /* |
| * 24XX: RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSP |
| * |
| * 2430: RM_RSTST_MDM |
| * |
| * 3430: RM_RSTST_CORE, RM_RSTST_EMU |
| */ |
| #define OMAP_DOMAINWKUP_RST_MASK (1 << 2) |
| |
| /* |
| * 24XX: RM_RSTST_MPU, RM_RSTST_WKUP, RM_RSTST_DSP |
| * On 24XX, 'GLOBALWARM_RST' is called 'GLOBALWMPU_RST'. |
| * |
| * 2430: RM_RSTST_MDM |
| * |
| * 3430: RM_RSTST_CORE, RM_RSTST_EMU |
| */ |
| #define OMAP_GLOBALWARM_RST_SHIFT 1 |
| #define OMAP_GLOBALWARM_RST_MASK (1 << 1) |
| #define OMAP_GLOBALCOLD_RST_SHIFT 0 |
| #define OMAP_GLOBALCOLD_RST_MASK (1 << 0) |
| |
| /* |
| * 24XX: PM_WKDEP_GFX, PM_WKDEP_MPU, PM_WKDEP_CORE, PM_WKDEP_DSP |
| * 2420 TRM sometimes uses "EN_WAKEUP" instead of "EN_WKUP" |
| * |
| * 2430: PM_WKDEP_MDM |
| * |
| * 3430: PM_WKDEP_IVA2, PM_WKDEP_GFX, PM_WKDEP_DSS, PM_WKDEP_CAM, |
| * PM_WKDEP_PER |
| */ |
| #define OMAP_EN_WKUP_SHIFT 4 |
| #define OMAP_EN_WKUP_MASK (1 << 4) |
| |
| /* |
| * 24XX: PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX, |
| * PM_PWSTCTRL_DSP |
| * |
| * 2430: PM_PWSTCTRL_MDM |
| * |
| * 3430: PM_PWSTCTRL_IVA2, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX, |
| * PM_PWSTCTRL_DSS, PM_PWSTCTRL_CAM, PM_PWSTCTRL_PER, |
| * PM_PWSTCTRL_NEON |
| */ |
| #define OMAP_LOGICRETSTATE_MASK (1 << 2) |
| |
| |
| #endif |