| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * This file contains kasan initialization code for ARM. |
| * |
| * Copyright (c) 2018 Samsung Electronics Co., Ltd. |
| * Author: Andrey Ryabinin <ryabinin.a.a@gmail.com> |
| * Author: Linus Walleij <linus.walleij@linaro.org> |
| */ |
| |
| #define pr_fmt(fmt) "kasan: " fmt |
| #include <linux/kasan.h> |
| #include <linux/kernel.h> |
| #include <linux/memblock.h> |
| #include <linux/sched/task.h> |
| #include <linux/start_kernel.h> |
| #include <linux/pgtable.h> |
| #include <asm/cputype.h> |
| #include <asm/highmem.h> |
| #include <asm/mach/map.h> |
| #include <asm/page.h> |
| #include <asm/pgalloc.h> |
| #include <asm/procinfo.h> |
| #include <asm/proc-fns.h> |
| |
| #include "mm.h" |
| |
| static pgd_t tmp_pgd_table[PTRS_PER_PGD] __initdata __aligned(PGD_SIZE); |
| |
| pmd_t tmp_pmd_table[PTRS_PER_PMD] __page_aligned_bss; |
| |
| static __init void *kasan_alloc_block_raw(size_t size) |
| { |
| return memblock_alloc_try_nid_raw(size, size, __pa(MAX_DMA_ADDRESS), |
| MEMBLOCK_ALLOC_NOLEAKTRACE, NUMA_NO_NODE); |
| } |
| |
| static __init void *kasan_alloc_block(size_t size) |
| { |
| return memblock_alloc_try_nid(size, size, __pa(MAX_DMA_ADDRESS), |
| MEMBLOCK_ALLOC_NOLEAKTRACE, NUMA_NO_NODE); |
| } |
| |
| static void __init kasan_pte_populate(pmd_t *pmdp, unsigned long addr, |
| unsigned long end, bool early) |
| { |
| unsigned long next; |
| pte_t *ptep = pte_offset_kernel(pmdp, addr); |
| |
| do { |
| pte_t entry; |
| void *p; |
| |
| next = addr + PAGE_SIZE; |
| |
| if (!early) { |
| if (!pte_none(READ_ONCE(*ptep))) |
| continue; |
| |
| p = kasan_alloc_block_raw(PAGE_SIZE); |
| if (!p) { |
| panic("%s failed to allocate shadow page for address 0x%lx\n", |
| __func__, addr); |
| return; |
| } |
| memset(p, KASAN_SHADOW_INIT, PAGE_SIZE); |
| entry = pfn_pte(virt_to_pfn(p), |
| __pgprot(pgprot_val(PAGE_KERNEL))); |
| } else if (pte_none(READ_ONCE(*ptep))) { |
| /* |
| * The early shadow memory is mapping all KASan |
| * operations to one and the same page in memory, |
| * "kasan_early_shadow_page" so that the instrumentation |
| * will work on a scratch area until we can set up the |
| * proper KASan shadow memory. |
| */ |
| entry = pfn_pte(virt_to_pfn(kasan_early_shadow_page), |
| __pgprot(_L_PTE_DEFAULT | L_PTE_DIRTY | L_PTE_XN)); |
| } else { |
| /* |
| * Early shadow mappings are PMD_SIZE aligned, so if the |
| * first entry is already set, they must all be set. |
| */ |
| return; |
| } |
| |
| set_pte_at(&init_mm, addr, ptep, entry); |
| } while (ptep++, addr = next, addr != end); |
| } |
| |
| /* |
| * The pmd (page middle directory) is only used on LPAE |
| */ |
| static void __init kasan_pmd_populate(pud_t *pudp, unsigned long addr, |
| unsigned long end, bool early) |
| { |
| unsigned long next; |
| pmd_t *pmdp = pmd_offset(pudp, addr); |
| |
| do { |
| if (pmd_none(*pmdp)) { |
| /* |
| * We attempt to allocate a shadow block for the PMDs |
| * used by the PTEs for this address if it isn't already |
| * allocated. |
| */ |
| void *p = early ? kasan_early_shadow_pte : |
| kasan_alloc_block(PAGE_SIZE); |
| |
| if (!p) { |
| panic("%s failed to allocate shadow block for address 0x%lx\n", |
| __func__, addr); |
| return; |
| } |
| pmd_populate_kernel(&init_mm, pmdp, p); |
| flush_pmd_entry(pmdp); |
| } |
| |
| next = pmd_addr_end(addr, end); |
| kasan_pte_populate(pmdp, addr, next, early); |
| } while (pmdp++, addr = next, addr != end); |
| } |
| |
| static void __init kasan_pgd_populate(unsigned long addr, unsigned long end, |
| bool early) |
| { |
| unsigned long next; |
| pgd_t *pgdp; |
| p4d_t *p4dp; |
| pud_t *pudp; |
| |
| pgdp = pgd_offset_k(addr); |
| |
| do { |
| /* |
| * Allocate and populate the shadow block of p4d folded into |
| * pud folded into pmd if it doesn't already exist |
| */ |
| if (!early && pgd_none(*pgdp)) { |
| void *p = kasan_alloc_block(PAGE_SIZE); |
| |
| if (!p) { |
| panic("%s failed to allocate shadow block for address 0x%lx\n", |
| __func__, addr); |
| return; |
| } |
| pgd_populate(&init_mm, pgdp, p); |
| } |
| |
| next = pgd_addr_end(addr, end); |
| /* |
| * We just immediately jump over the p4d and pud page |
| * directories since we believe ARM32 will never gain four |
| * nor five level page tables. |
| */ |
| p4dp = p4d_offset(pgdp, addr); |
| pudp = pud_offset(p4dp, addr); |
| |
| kasan_pmd_populate(pudp, addr, next, early); |
| } while (pgdp++, addr = next, addr != end); |
| } |
| |
| extern struct proc_info_list *lookup_processor_type(unsigned int); |
| |
| void __init kasan_early_init(void) |
| { |
| struct proc_info_list *list; |
| |
| /* |
| * locate processor in the list of supported processor |
| * types. The linker builds this table for us from the |
| * entries in arch/arm/mm/proc-*.S |
| */ |
| list = lookup_processor_type(read_cpuid_id()); |
| if (list) { |
| #ifdef MULTI_CPU |
| processor = *list->proc; |
| #endif |
| } |
| |
| BUILD_BUG_ON((KASAN_SHADOW_END - (1UL << 29)) != KASAN_SHADOW_OFFSET); |
| /* |
| * We walk the page table and set all of the shadow memory to point |
| * to the scratch page. |
| */ |
| kasan_pgd_populate(KASAN_SHADOW_START, KASAN_SHADOW_END, true); |
| } |
| |
| static void __init clear_pgds(unsigned long start, |
| unsigned long end) |
| { |
| for (; start && start < end; start += PMD_SIZE) |
| pmd_clear(pmd_off_k(start)); |
| } |
| |
| static int __init create_mapping(void *start, void *end) |
| { |
| void *shadow_start, *shadow_end; |
| |
| shadow_start = kasan_mem_to_shadow(start); |
| shadow_end = kasan_mem_to_shadow(end); |
| |
| pr_info("Mapping kernel virtual memory block: %px-%px at shadow: %px-%px\n", |
| start, end, shadow_start, shadow_end); |
| |
| kasan_pgd_populate((unsigned long)shadow_start & PAGE_MASK, |
| PAGE_ALIGN((unsigned long)shadow_end), false); |
| return 0; |
| } |
| |
| void __init kasan_init(void) |
| { |
| phys_addr_t pa_start, pa_end; |
| u64 i; |
| |
| /* |
| * We are going to perform proper setup of shadow memory. |
| * |
| * At first we should unmap early shadow (clear_pgds() call bellow). |
| * However, instrumented code can't execute without shadow memory. |
| * |
| * To keep the early shadow memory MMU tables around while setting up |
| * the proper shadow memory, we copy swapper_pg_dir (the initial page |
| * table) to tmp_pgd_table and use that to keep the early shadow memory |
| * mapped until the full shadow setup is finished. Then we swap back |
| * to the proper swapper_pg_dir. |
| */ |
| |
| memcpy(tmp_pgd_table, swapper_pg_dir, sizeof(tmp_pgd_table)); |
| #ifdef CONFIG_ARM_LPAE |
| /* We need to be in the same PGD or this won't work */ |
| BUILD_BUG_ON(pgd_index(KASAN_SHADOW_START) != |
| pgd_index(KASAN_SHADOW_END)); |
| memcpy(tmp_pmd_table, |
| (void*)pgd_page_vaddr(*pgd_offset_k(KASAN_SHADOW_START)), |
| sizeof(tmp_pmd_table)); |
| set_pgd(&tmp_pgd_table[pgd_index(KASAN_SHADOW_START)], |
| __pgd(__pa(tmp_pmd_table) | PMD_TYPE_TABLE | L_PGD_SWAPPER)); |
| #endif |
| cpu_switch_mm(tmp_pgd_table, &init_mm); |
| local_flush_tlb_all(); |
| |
| clear_pgds(KASAN_SHADOW_START, KASAN_SHADOW_END); |
| |
| if (!IS_ENABLED(CONFIG_KASAN_VMALLOC)) |
| kasan_populate_early_shadow(kasan_mem_to_shadow((void *)VMALLOC_START), |
| kasan_mem_to_shadow((void *)VMALLOC_END)); |
| |
| kasan_populate_early_shadow(kasan_mem_to_shadow((void *)VMALLOC_END), |
| kasan_mem_to_shadow((void *)-1UL) + 1); |
| |
| for_each_mem_range(i, &pa_start, &pa_end) { |
| void *start = __va(pa_start); |
| void *end = __va(pa_end); |
| |
| /* Do not attempt to shadow highmem */ |
| if (pa_start >= arm_lowmem_limit) { |
| pr_info("Skip highmem block at %pa-%pa\n", &pa_start, &pa_end); |
| continue; |
| } |
| if (pa_end > arm_lowmem_limit) { |
| pr_info("Truncating shadow for memory block at %pa-%pa to lowmem region at %pa\n", |
| &pa_start, &pa_end, &arm_lowmem_limit); |
| end = __va(arm_lowmem_limit); |
| } |
| if (start >= end) { |
| pr_info("Skipping invalid memory block %pa-%pa (virtual %p-%p)\n", |
| &pa_start, &pa_end, start, end); |
| continue; |
| } |
| |
| create_mapping(start, end); |
| } |
| |
| /* |
| * 1. The module global variables are in MODULES_VADDR ~ MODULES_END, |
| * so we need to map this area if CONFIG_KASAN_VMALLOC=n. With |
| * VMALLOC support KASAN will manage this region dynamically, |
| * refer to kasan_populate_vmalloc() and ARM's implementation of |
| * module_alloc(). |
| * 2. PKMAP_BASE ~ PKMAP_BASE+PMD_SIZE's shadow and MODULES_VADDR |
| * ~ MODULES_END's shadow is in the same PMD_SIZE, so we can't |
| * use kasan_populate_zero_shadow. |
| */ |
| if (!IS_ENABLED(CONFIG_KASAN_VMALLOC) && IS_ENABLED(CONFIG_MODULES)) |
| create_mapping((void *)MODULES_VADDR, (void *)(MODULES_END)); |
| create_mapping((void *)PKMAP_BASE, (void *)(PKMAP_BASE + PMD_SIZE)); |
| |
| /* |
| * KAsan may reuse the contents of kasan_early_shadow_pte directly, so |
| * we should make sure that it maps the zero page read-only. |
| */ |
| for (i = 0; i < PTRS_PER_PTE; i++) |
| set_pte_at(&init_mm, KASAN_SHADOW_START + i*PAGE_SIZE, |
| &kasan_early_shadow_pte[i], |
| pfn_pte(virt_to_pfn(kasan_early_shadow_page), |
| __pgprot(pgprot_val(PAGE_KERNEL) |
| | L_PTE_RDONLY))); |
| |
| cpu_switch_mm(swapper_pg_dir, &init_mm); |
| local_flush_tlb_all(); |
| |
| memset(kasan_early_shadow_page, 0, PAGE_SIZE); |
| pr_info("Kernel address sanitizer initialized\n"); |
| init_task.kasan_depth = 0; |
| } |