| // SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause |
| /* Copyright (C) 2022 NVIDIA CORPORATION & AFFILIATES */ |
| |
| #include <linux/bitfield.h> |
| #include <linux/bitops.h> |
| #include <linux/device.h> |
| #include <linux/err.h> |
| #include <linux/gpio/driver.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/spinlock.h> |
| #include <linux/types.h> |
| |
| /* |
| * There are 2 YU GPIO blocks: |
| * gpio[0]: HOST_GPIO0->HOST_GPIO31 |
| * gpio[1]: HOST_GPIO32->HOST_GPIO55 |
| */ |
| #define MLXBF3_GPIO_MAX_PINS_PER_BLOCK 32 |
| #define MLXBF3_GPIO_MAX_PINS_BLOCK0 32 |
| #define MLXBF3_GPIO_MAX_PINS_BLOCK1 24 |
| |
| /* |
| * fw_gpio[x] block registers and their offset |
| */ |
| #define MLXBF_GPIO_FW_OUTPUT_ENABLE_SET 0x00 |
| #define MLXBF_GPIO_FW_DATA_OUT_SET 0x04 |
| |
| #define MLXBF_GPIO_FW_OUTPUT_ENABLE_CLEAR 0x00 |
| #define MLXBF_GPIO_FW_DATA_OUT_CLEAR 0x04 |
| |
| #define MLXBF_GPIO_CAUSE_RISE_EN 0x00 |
| #define MLXBF_GPIO_CAUSE_FALL_EN 0x04 |
| #define MLXBF_GPIO_READ_DATA_IN 0x08 |
| |
| #define MLXBF_GPIO_CAUSE_OR_CAUSE_EVTEN0 0x00 |
| #define MLXBF_GPIO_CAUSE_OR_EVTEN0 0x14 |
| #define MLXBF_GPIO_CAUSE_OR_CLRCAUSE 0x18 |
| |
| struct mlxbf3_gpio_context { |
| struct gpio_chip gc; |
| |
| /* YU GPIO block address */ |
| void __iomem *gpio_set_io; |
| void __iomem *gpio_clr_io; |
| void __iomem *gpio_io; |
| |
| /* YU GPIO cause block address */ |
| void __iomem *gpio_cause_io; |
| }; |
| |
| static void mlxbf3_gpio_irq_enable(struct irq_data *irqd) |
| { |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); |
| struct mlxbf3_gpio_context *gs = gpiochip_get_data(gc); |
| irq_hw_number_t offset = irqd_to_hwirq(irqd); |
| unsigned long flags; |
| u32 val; |
| |
| gpiochip_enable_irq(gc, offset); |
| |
| raw_spin_lock_irqsave(&gs->gc.bgpio_lock, flags); |
| writel(BIT(offset), gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_CLRCAUSE); |
| |
| val = readl(gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0); |
| val |= BIT(offset); |
| writel(val, gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0); |
| raw_spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags); |
| } |
| |
| static void mlxbf3_gpio_irq_disable(struct irq_data *irqd) |
| { |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); |
| struct mlxbf3_gpio_context *gs = gpiochip_get_data(gc); |
| irq_hw_number_t offset = irqd_to_hwirq(irqd); |
| unsigned long flags; |
| u32 val; |
| |
| raw_spin_lock_irqsave(&gs->gc.bgpio_lock, flags); |
| val = readl(gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0); |
| val &= ~BIT(offset); |
| writel(val, gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0); |
| raw_spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags); |
| |
| gpiochip_disable_irq(gc, offset); |
| } |
| |
| static irqreturn_t mlxbf3_gpio_irq_handler(int irq, void *ptr) |
| { |
| struct mlxbf3_gpio_context *gs = ptr; |
| struct gpio_chip *gc = &gs->gc; |
| unsigned long pending; |
| u32 level; |
| |
| pending = readl(gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_CAUSE_EVTEN0); |
| writel(pending, gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_CLRCAUSE); |
| |
| for_each_set_bit(level, &pending, gc->ngpio) |
| generic_handle_domain_irq(gc->irq.domain, level); |
| |
| return IRQ_RETVAL(pending); |
| } |
| |
| static int |
| mlxbf3_gpio_irq_set_type(struct irq_data *irqd, unsigned int type) |
| { |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); |
| struct mlxbf3_gpio_context *gs = gpiochip_get_data(gc); |
| irq_hw_number_t offset = irqd_to_hwirq(irqd); |
| unsigned long flags; |
| u32 val; |
| |
| raw_spin_lock_irqsave(&gs->gc.bgpio_lock, flags); |
| |
| switch (type & IRQ_TYPE_SENSE_MASK) { |
| case IRQ_TYPE_EDGE_BOTH: |
| val = readl(gs->gpio_io + MLXBF_GPIO_CAUSE_FALL_EN); |
| val |= BIT(offset); |
| writel(val, gs->gpio_io + MLXBF_GPIO_CAUSE_FALL_EN); |
| val = readl(gs->gpio_io + MLXBF_GPIO_CAUSE_RISE_EN); |
| val |= BIT(offset); |
| writel(val, gs->gpio_io + MLXBF_GPIO_CAUSE_RISE_EN); |
| break; |
| case IRQ_TYPE_EDGE_RISING: |
| val = readl(gs->gpio_io + MLXBF_GPIO_CAUSE_RISE_EN); |
| val |= BIT(offset); |
| writel(val, gs->gpio_io + MLXBF_GPIO_CAUSE_RISE_EN); |
| break; |
| case IRQ_TYPE_EDGE_FALLING: |
| val = readl(gs->gpio_io + MLXBF_GPIO_CAUSE_FALL_EN); |
| val |= BIT(offset); |
| writel(val, gs->gpio_io + MLXBF_GPIO_CAUSE_FALL_EN); |
| break; |
| default: |
| raw_spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags); |
| return -EINVAL; |
| } |
| |
| raw_spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags); |
| |
| irq_set_handler_locked(irqd, handle_edge_irq); |
| |
| return 0; |
| } |
| |
| /* This function needs to be defined for handle_edge_irq() */ |
| static void mlxbf3_gpio_irq_ack(struct irq_data *data) |
| { |
| } |
| |
| static const struct irq_chip gpio_mlxbf3_irqchip = { |
| .name = "MLNXBF33", |
| .irq_ack = mlxbf3_gpio_irq_ack, |
| .irq_set_type = mlxbf3_gpio_irq_set_type, |
| .irq_enable = mlxbf3_gpio_irq_enable, |
| .irq_disable = mlxbf3_gpio_irq_disable, |
| .flags = IRQCHIP_IMMUTABLE, |
| GPIOCHIP_IRQ_RESOURCE_HELPERS, |
| }; |
| |
| static int mlxbf3_gpio_add_pin_ranges(struct gpio_chip *chip) |
| { |
| unsigned int id; |
| |
| switch(chip->ngpio) { |
| case MLXBF3_GPIO_MAX_PINS_BLOCK0: |
| id = 0; |
| break; |
| case MLXBF3_GPIO_MAX_PINS_BLOCK1: |
| id = 1; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return gpiochip_add_pin_range(chip, "MLNXBF34:00", |
| chip->base, id * MLXBF3_GPIO_MAX_PINS_PER_BLOCK, |
| chip->ngpio); |
| } |
| |
| static int mlxbf3_gpio_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct mlxbf3_gpio_context *gs; |
| struct gpio_irq_chip *girq; |
| struct gpio_chip *gc; |
| int ret, irq; |
| |
| gs = devm_kzalloc(dev, sizeof(*gs), GFP_KERNEL); |
| if (!gs) |
| return -ENOMEM; |
| |
| gs->gpio_io = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(gs->gpio_io)) |
| return PTR_ERR(gs->gpio_io); |
| |
| gs->gpio_cause_io = devm_platform_ioremap_resource(pdev, 1); |
| if (IS_ERR(gs->gpio_cause_io)) |
| return PTR_ERR(gs->gpio_cause_io); |
| |
| gs->gpio_set_io = devm_platform_ioremap_resource(pdev, 2); |
| if (IS_ERR(gs->gpio_set_io)) |
| return PTR_ERR(gs->gpio_set_io); |
| |
| gs->gpio_clr_io = devm_platform_ioremap_resource(pdev, 3); |
| if (IS_ERR(gs->gpio_clr_io)) |
| return PTR_ERR(gs->gpio_clr_io); |
| gc = &gs->gc; |
| |
| ret = bgpio_init(gc, dev, 4, |
| gs->gpio_io + MLXBF_GPIO_READ_DATA_IN, |
| gs->gpio_set_io + MLXBF_GPIO_FW_DATA_OUT_SET, |
| gs->gpio_clr_io + MLXBF_GPIO_FW_DATA_OUT_CLEAR, |
| gs->gpio_set_io + MLXBF_GPIO_FW_OUTPUT_ENABLE_SET, |
| gs->gpio_clr_io + MLXBF_GPIO_FW_OUTPUT_ENABLE_CLEAR, 0); |
| if (ret) |
| return dev_err_probe(dev, ret, "%s: bgpio_init() failed", __func__); |
| |
| gc->request = gpiochip_generic_request; |
| gc->free = gpiochip_generic_free; |
| gc->owner = THIS_MODULE; |
| gc->add_pin_ranges = mlxbf3_gpio_add_pin_ranges; |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq >= 0) { |
| girq = &gs->gc.irq; |
| gpio_irq_chip_set_chip(girq, &gpio_mlxbf3_irqchip); |
| girq->default_type = IRQ_TYPE_NONE; |
| /* This will let us handle the parent IRQ in the driver */ |
| girq->num_parents = 0; |
| girq->parents = NULL; |
| girq->parent_handler = NULL; |
| girq->handler = handle_bad_irq; |
| |
| /* |
| * Directly request the irq here instead of passing |
| * a flow-handler because the irq is shared. |
| */ |
| ret = devm_request_irq(dev, irq, mlxbf3_gpio_irq_handler, |
| IRQF_SHARED, dev_name(dev), gs); |
| if (ret) |
| return dev_err_probe(dev, ret, "failed to request IRQ"); |
| } |
| |
| platform_set_drvdata(pdev, gs); |
| |
| ret = devm_gpiochip_add_data(dev, &gs->gc, gs); |
| if (ret) |
| dev_err_probe(dev, ret, "Failed adding memory mapped gpiochip\n"); |
| |
| return 0; |
| } |
| |
| static const struct acpi_device_id mlxbf3_gpio_acpi_match[] = { |
| { "MLNXBF33", 0 }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(acpi, mlxbf3_gpio_acpi_match); |
| |
| static struct platform_driver mlxbf3_gpio_driver = { |
| .driver = { |
| .name = "mlxbf3_gpio", |
| .acpi_match_table = mlxbf3_gpio_acpi_match, |
| }, |
| .probe = mlxbf3_gpio_probe, |
| }; |
| module_platform_driver(mlxbf3_gpio_driver); |
| |
| MODULE_SOFTDEP("pre: pinctrl-mlxbf3"); |
| MODULE_DESCRIPTION("NVIDIA BlueField-3 GPIO Driver"); |
| MODULE_AUTHOR("Asmaa Mnebhi <asmaa@nvidia.com>"); |
| MODULE_LICENSE("Dual BSD/GPL"); |