| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Hardware monitoring driver for LM25056 / LM25066 / LM5064 / LM5066 |
| * |
| * Copyright (c) 2011 Ericsson AB. |
| * Copyright (c) 2013 Guenter Roeck |
| */ |
| |
| #include <linux/bitops.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/err.h> |
| #include <linux/slab.h> |
| #include <linux/i2c.h> |
| #include <linux/log2.h> |
| #include <linux/of.h> |
| #include "pmbus.h" |
| |
| enum chips { lm25056 = 1, lm25066, lm5064, lm5066, lm5066i }; |
| |
| #define LM25066_READ_VAUX 0xd0 |
| #define LM25066_MFR_READ_IIN 0xd1 |
| #define LM25066_MFR_READ_PIN 0xd2 |
| #define LM25066_MFR_IIN_OC_WARN_LIMIT 0xd3 |
| #define LM25066_MFR_PIN_OP_WARN_LIMIT 0xd4 |
| #define LM25066_READ_PIN_PEAK 0xd5 |
| #define LM25066_CLEAR_PIN_PEAK 0xd6 |
| #define LM25066_DEVICE_SETUP 0xd9 |
| #define LM25066_READ_AVG_VIN 0xdc |
| #define LM25066_SAMPLES_FOR_AVG 0xdb |
| #define LM25066_READ_AVG_VOUT 0xdd |
| #define LM25066_READ_AVG_IIN 0xde |
| #define LM25066_READ_AVG_PIN 0xdf |
| |
| #define LM25066_DEV_SETUP_CL BIT(4) /* Current limit */ |
| |
| #define LM25066_SAMPLES_FOR_AVG_MAX 4096 |
| |
| /* LM25056 only */ |
| |
| #define LM25056_VAUX_OV_WARN_LIMIT 0xe3 |
| #define LM25056_VAUX_UV_WARN_LIMIT 0xe4 |
| |
| #define LM25056_MFR_STS_VAUX_OV_WARN BIT(1) |
| #define LM25056_MFR_STS_VAUX_UV_WARN BIT(0) |
| |
| struct __coeff { |
| short m, b, R; |
| }; |
| |
| #define PSC_CURRENT_IN_L (PSC_NUM_CLASSES) |
| #define PSC_POWER_L (PSC_NUM_CLASSES + 1) |
| |
| static const struct __coeff lm25066_coeff[][PSC_NUM_CLASSES + 2] = { |
| [lm25056] = { |
| [PSC_VOLTAGE_IN] = { |
| .m = 16296, |
| .b = 1343, |
| .R = -2, |
| }, |
| [PSC_CURRENT_IN] = { |
| .m = 13797, |
| .b = -1833, |
| .R = -2, |
| }, |
| [PSC_CURRENT_IN_L] = { |
| .m = 6726, |
| .b = -537, |
| .R = -2, |
| }, |
| [PSC_POWER] = { |
| .m = 5501, |
| .b = -2908, |
| .R = -3, |
| }, |
| [PSC_POWER_L] = { |
| .m = 26882, |
| .b = -5646, |
| .R = -4, |
| }, |
| [PSC_TEMPERATURE] = { |
| .m = 1580, |
| .b = -14500, |
| .R = -2, |
| }, |
| }, |
| [lm25066] = { |
| [PSC_VOLTAGE_IN] = { |
| .m = 22070, |
| .b = -1800, |
| .R = -2, |
| }, |
| [PSC_VOLTAGE_OUT] = { |
| .m = 22070, |
| .b = -1800, |
| .R = -2, |
| }, |
| [PSC_CURRENT_IN] = { |
| .m = 13661, |
| .b = -5200, |
| .R = -2, |
| }, |
| [PSC_CURRENT_IN_L] = { |
| .m = 6854, |
| .b = -3100, |
| .R = -2, |
| }, |
| [PSC_POWER] = { |
| .m = 736, |
| .b = -3300, |
| .R = -2, |
| }, |
| [PSC_POWER_L] = { |
| .m = 369, |
| .b = -1900, |
| .R = -2, |
| }, |
| [PSC_TEMPERATURE] = { |
| .m = 16, |
| }, |
| }, |
| [lm5064] = { |
| [PSC_VOLTAGE_IN] = { |
| .m = 4611, |
| .b = -642, |
| .R = -2, |
| }, |
| [PSC_VOLTAGE_OUT] = { |
| .m = 4621, |
| .b = 423, |
| .R = -2, |
| }, |
| [PSC_CURRENT_IN] = { |
| .m = 10742, |
| .b = 1552, |
| .R = -2, |
| }, |
| [PSC_CURRENT_IN_L] = { |
| .m = 5456, |
| .b = 2118, |
| .R = -2, |
| }, |
| [PSC_POWER] = { |
| .m = 1204, |
| .b = 8524, |
| .R = -3, |
| }, |
| [PSC_POWER_L] = { |
| .m = 612, |
| .b = 11202, |
| .R = -3, |
| }, |
| [PSC_TEMPERATURE] = { |
| .m = 16, |
| }, |
| }, |
| [lm5066] = { |
| [PSC_VOLTAGE_IN] = { |
| .m = 4587, |
| .b = -1200, |
| .R = -2, |
| }, |
| [PSC_VOLTAGE_OUT] = { |
| .m = 4587, |
| .b = -2400, |
| .R = -2, |
| }, |
| [PSC_CURRENT_IN] = { |
| .m = 10753, |
| .b = -1200, |
| .R = -2, |
| }, |
| [PSC_CURRENT_IN_L] = { |
| .m = 5405, |
| .b = -600, |
| .R = -2, |
| }, |
| [PSC_POWER] = { |
| .m = 1204, |
| .b = -6000, |
| .R = -3, |
| }, |
| [PSC_POWER_L] = { |
| .m = 605, |
| .b = -8000, |
| .R = -3, |
| }, |
| [PSC_TEMPERATURE] = { |
| .m = 16, |
| }, |
| }, |
| [lm5066i] = { |
| [PSC_VOLTAGE_IN] = { |
| .m = 4617, |
| .b = -140, |
| .R = -2, |
| }, |
| [PSC_VOLTAGE_OUT] = { |
| .m = 4602, |
| .b = 500, |
| .R = -2, |
| }, |
| [PSC_CURRENT_IN] = { |
| .m = 15076, |
| .b = -504, |
| .R = -2, |
| }, |
| [PSC_CURRENT_IN_L] = { |
| .m = 7645, |
| .b = 100, |
| .R = -2, |
| }, |
| [PSC_POWER] = { |
| .m = 1701, |
| .b = -4000, |
| .R = -3, |
| }, |
| [PSC_POWER_L] = { |
| .m = 861, |
| .b = -965, |
| .R = -3, |
| }, |
| [PSC_TEMPERATURE] = { |
| .m = 16, |
| }, |
| }, |
| }; |
| |
| struct lm25066_data { |
| int id; |
| u16 rlimit; /* Maximum register value */ |
| struct pmbus_driver_info info; |
| }; |
| |
| #define to_lm25066_data(x) container_of(x, struct lm25066_data, info) |
| |
| static int lm25066_read_word_data(struct i2c_client *client, int page, |
| int phase, int reg) |
| { |
| const struct pmbus_driver_info *info = pmbus_get_driver_info(client); |
| const struct lm25066_data *data = to_lm25066_data(info); |
| int ret; |
| |
| switch (reg) { |
| case PMBUS_VIRT_READ_VMON: |
| ret = pmbus_read_word_data(client, 0, 0xff, LM25066_READ_VAUX); |
| if (ret < 0) |
| break; |
| /* Adjust returned value to match VIN coefficients */ |
| switch (data->id) { |
| case lm25056: |
| /* VIN: 6.14 mV VAUX: 293 uV LSB */ |
| ret = DIV_ROUND_CLOSEST(ret * 293, 6140); |
| break; |
| case lm25066: |
| /* VIN: 4.54 mV VAUX: 283.2 uV LSB */ |
| ret = DIV_ROUND_CLOSEST(ret * 2832, 45400); |
| break; |
| case lm5064: |
| /* VIN: 4.53 mV VAUX: 700 uV LSB */ |
| ret = DIV_ROUND_CLOSEST(ret * 70, 453); |
| break; |
| case lm5066: |
| case lm5066i: |
| /* VIN: 2.18 mV VAUX: 725 uV LSB */ |
| ret = DIV_ROUND_CLOSEST(ret * 725, 2180); |
| break; |
| } |
| break; |
| case PMBUS_READ_IIN: |
| ret = pmbus_read_word_data(client, 0, 0xff, |
| LM25066_MFR_READ_IIN); |
| break; |
| case PMBUS_READ_PIN: |
| ret = pmbus_read_word_data(client, 0, 0xff, |
| LM25066_MFR_READ_PIN); |
| break; |
| case PMBUS_IIN_OC_WARN_LIMIT: |
| ret = pmbus_read_word_data(client, 0, 0xff, |
| LM25066_MFR_IIN_OC_WARN_LIMIT); |
| break; |
| case PMBUS_PIN_OP_WARN_LIMIT: |
| ret = pmbus_read_word_data(client, 0, 0xff, |
| LM25066_MFR_PIN_OP_WARN_LIMIT); |
| break; |
| case PMBUS_VIRT_READ_VIN_AVG: |
| ret = pmbus_read_word_data(client, 0, 0xff, |
| LM25066_READ_AVG_VIN); |
| break; |
| case PMBUS_VIRT_READ_VOUT_AVG: |
| ret = pmbus_read_word_data(client, 0, 0xff, |
| LM25066_READ_AVG_VOUT); |
| break; |
| case PMBUS_VIRT_READ_IIN_AVG: |
| ret = pmbus_read_word_data(client, 0, 0xff, |
| LM25066_READ_AVG_IIN); |
| break; |
| case PMBUS_VIRT_READ_PIN_AVG: |
| ret = pmbus_read_word_data(client, 0, 0xff, |
| LM25066_READ_AVG_PIN); |
| break; |
| case PMBUS_VIRT_READ_PIN_MAX: |
| ret = pmbus_read_word_data(client, 0, 0xff, |
| LM25066_READ_PIN_PEAK); |
| break; |
| case PMBUS_VIRT_RESET_PIN_HISTORY: |
| ret = 0; |
| break; |
| case PMBUS_VIRT_SAMPLES: |
| ret = pmbus_read_byte_data(client, 0, LM25066_SAMPLES_FOR_AVG); |
| if (ret < 0) |
| break; |
| ret = 1 << ret; |
| break; |
| default: |
| ret = -ENODATA; |
| break; |
| } |
| return ret; |
| } |
| |
| static int lm25056_read_word_data(struct i2c_client *client, int page, |
| int phase, int reg) |
| { |
| int ret; |
| |
| switch (reg) { |
| case PMBUS_VIRT_VMON_UV_WARN_LIMIT: |
| ret = pmbus_read_word_data(client, 0, 0xff, |
| LM25056_VAUX_UV_WARN_LIMIT); |
| if (ret < 0) |
| break; |
| /* Adjust returned value to match VIN coefficients */ |
| ret = DIV_ROUND_CLOSEST(ret * 293, 6140); |
| break; |
| case PMBUS_VIRT_VMON_OV_WARN_LIMIT: |
| ret = pmbus_read_word_data(client, 0, 0xff, |
| LM25056_VAUX_OV_WARN_LIMIT); |
| if (ret < 0) |
| break; |
| /* Adjust returned value to match VIN coefficients */ |
| ret = DIV_ROUND_CLOSEST(ret * 293, 6140); |
| break; |
| default: |
| ret = lm25066_read_word_data(client, page, phase, reg); |
| break; |
| } |
| return ret; |
| } |
| |
| static int lm25056_read_byte_data(struct i2c_client *client, int page, int reg) |
| { |
| int ret, s; |
| |
| switch (reg) { |
| case PMBUS_VIRT_STATUS_VMON: |
| ret = pmbus_read_byte_data(client, 0, |
| PMBUS_STATUS_MFR_SPECIFIC); |
| if (ret < 0) |
| break; |
| s = 0; |
| if (ret & LM25056_MFR_STS_VAUX_UV_WARN) |
| s |= PB_VOLTAGE_UV_WARNING; |
| if (ret & LM25056_MFR_STS_VAUX_OV_WARN) |
| s |= PB_VOLTAGE_OV_WARNING; |
| ret = s; |
| break; |
| default: |
| ret = -ENODATA; |
| break; |
| } |
| return ret; |
| } |
| |
| static int lm25066_write_word_data(struct i2c_client *client, int page, int reg, |
| u16 word) |
| { |
| const struct pmbus_driver_info *info = pmbus_get_driver_info(client); |
| const struct lm25066_data *data = to_lm25066_data(info); |
| int ret; |
| |
| switch (reg) { |
| case PMBUS_POUT_OP_FAULT_LIMIT: |
| case PMBUS_POUT_OP_WARN_LIMIT: |
| case PMBUS_VOUT_UV_WARN_LIMIT: |
| case PMBUS_OT_FAULT_LIMIT: |
| case PMBUS_OT_WARN_LIMIT: |
| case PMBUS_IIN_OC_FAULT_LIMIT: |
| case PMBUS_VIN_UV_WARN_LIMIT: |
| case PMBUS_VIN_UV_FAULT_LIMIT: |
| case PMBUS_VIN_OV_FAULT_LIMIT: |
| case PMBUS_VIN_OV_WARN_LIMIT: |
| word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit); |
| ret = pmbus_write_word_data(client, 0, reg, word); |
| break; |
| case PMBUS_IIN_OC_WARN_LIMIT: |
| word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit); |
| ret = pmbus_write_word_data(client, 0, |
| LM25066_MFR_IIN_OC_WARN_LIMIT, |
| word); |
| break; |
| case PMBUS_PIN_OP_WARN_LIMIT: |
| word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit); |
| ret = pmbus_write_word_data(client, 0, |
| LM25066_MFR_PIN_OP_WARN_LIMIT, |
| word); |
| break; |
| case PMBUS_VIRT_VMON_UV_WARN_LIMIT: |
| /* Adjust from VIN coefficients (for LM25056) */ |
| word = DIV_ROUND_CLOSEST((int)word * 6140, 293); |
| word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit); |
| ret = pmbus_write_word_data(client, 0, |
| LM25056_VAUX_UV_WARN_LIMIT, word); |
| break; |
| case PMBUS_VIRT_VMON_OV_WARN_LIMIT: |
| /* Adjust from VIN coefficients (for LM25056) */ |
| word = DIV_ROUND_CLOSEST((int)word * 6140, 293); |
| word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit); |
| ret = pmbus_write_word_data(client, 0, |
| LM25056_VAUX_OV_WARN_LIMIT, word); |
| break; |
| case PMBUS_VIRT_RESET_PIN_HISTORY: |
| ret = pmbus_write_byte(client, 0, LM25066_CLEAR_PIN_PEAK); |
| break; |
| case PMBUS_VIRT_SAMPLES: |
| word = clamp_val(word, 1, LM25066_SAMPLES_FOR_AVG_MAX); |
| ret = pmbus_write_byte_data(client, 0, LM25066_SAMPLES_FOR_AVG, |
| ilog2(word)); |
| break; |
| default: |
| ret = -ENODATA; |
| break; |
| } |
| return ret; |
| } |
| |
| #if IS_ENABLED(CONFIG_SENSORS_LM25066_REGULATOR) |
| static const struct regulator_desc lm25066_reg_desc[] = { |
| PMBUS_REGULATOR_ONE("vout"), |
| }; |
| #endif |
| |
| static const struct i2c_device_id lm25066_id[] = { |
| {"lm25056", lm25056}, |
| {"lm25066", lm25066}, |
| {"lm5064", lm5064}, |
| {"lm5066", lm5066}, |
| {"lm5066i", lm5066i}, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, lm25066_id); |
| |
| static const struct of_device_id __maybe_unused lm25066_of_match[] = { |
| { .compatible = "ti,lm25056", .data = (void *)lm25056, }, |
| { .compatible = "ti,lm25066", .data = (void *)lm25066, }, |
| { .compatible = "ti,lm5064", .data = (void *)lm5064, }, |
| { .compatible = "ti,lm5066", .data = (void *)lm5066, }, |
| { .compatible = "ti,lm5066i", .data = (void *)lm5066i, }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, lm25066_of_match); |
| |
| static int lm25066_probe(struct i2c_client *client) |
| { |
| int config; |
| u32 shunt; |
| struct lm25066_data *data; |
| struct pmbus_driver_info *info; |
| const struct __coeff *coeff; |
| |
| if (!i2c_check_functionality(client->adapter, |
| I2C_FUNC_SMBUS_READ_BYTE_DATA)) |
| return -ENODEV; |
| |
| data = devm_kzalloc(&client->dev, sizeof(struct lm25066_data), |
| GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| config = i2c_smbus_read_byte_data(client, LM25066_DEVICE_SETUP); |
| if (config < 0) |
| return config; |
| |
| data->id = (enum chips)(unsigned long)i2c_get_match_data(client); |
| |
| info = &data->info; |
| |
| info->pages = 1; |
| info->format[PSC_VOLTAGE_IN] = direct; |
| info->format[PSC_VOLTAGE_OUT] = direct; |
| info->format[PSC_CURRENT_IN] = direct; |
| info->format[PSC_TEMPERATURE] = direct; |
| info->format[PSC_POWER] = direct; |
| |
| info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VMON |
| | PMBUS_HAVE_PIN | PMBUS_HAVE_IIN | PMBUS_HAVE_STATUS_INPUT |
| | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_SAMPLES; |
| |
| if (data->id == lm25056) { |
| info->func[0] |= PMBUS_HAVE_STATUS_VMON; |
| info->read_word_data = lm25056_read_word_data; |
| info->read_byte_data = lm25056_read_byte_data; |
| data->rlimit = 0x0fff; |
| } else { |
| info->func[0] |= PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT; |
| info->read_word_data = lm25066_read_word_data; |
| data->rlimit = 0x0fff; |
| } |
| info->write_word_data = lm25066_write_word_data; |
| |
| coeff = &lm25066_coeff[data->id][0]; |
| info->m[PSC_TEMPERATURE] = coeff[PSC_TEMPERATURE].m; |
| info->b[PSC_TEMPERATURE] = coeff[PSC_TEMPERATURE].b; |
| info->R[PSC_TEMPERATURE] = coeff[PSC_TEMPERATURE].R; |
| info->m[PSC_VOLTAGE_IN] = coeff[PSC_VOLTAGE_IN].m; |
| info->b[PSC_VOLTAGE_IN] = coeff[PSC_VOLTAGE_IN].b; |
| info->R[PSC_VOLTAGE_IN] = coeff[PSC_VOLTAGE_IN].R; |
| info->m[PSC_VOLTAGE_OUT] = coeff[PSC_VOLTAGE_OUT].m; |
| info->b[PSC_VOLTAGE_OUT] = coeff[PSC_VOLTAGE_OUT].b; |
| info->R[PSC_VOLTAGE_OUT] = coeff[PSC_VOLTAGE_OUT].R; |
| info->R[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN].R; |
| info->R[PSC_POWER] = coeff[PSC_POWER].R; |
| if (config & LM25066_DEV_SETUP_CL) { |
| info->m[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN_L].m; |
| info->b[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN_L].b; |
| info->m[PSC_POWER] = coeff[PSC_POWER_L].m; |
| info->b[PSC_POWER] = coeff[PSC_POWER_L].b; |
| } else { |
| info->m[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN].m; |
| info->b[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN].b; |
| info->m[PSC_POWER] = coeff[PSC_POWER].m; |
| info->b[PSC_POWER] = coeff[PSC_POWER].b; |
| } |
| |
| /* |
| * Values in the TI datasheets are normalized for a 1mOhm sense |
| * resistor; assume that unless DT specifies a value explicitly. |
| */ |
| if (of_property_read_u32(client->dev.of_node, "shunt-resistor-micro-ohms", &shunt)) |
| shunt = 1000; |
| |
| info->m[PSC_CURRENT_IN] = info->m[PSC_CURRENT_IN] * shunt / 1000; |
| info->m[PSC_POWER] = info->m[PSC_POWER] * shunt / 1000; |
| |
| #if IS_ENABLED(CONFIG_SENSORS_LM25066_REGULATOR) |
| /* LM25056 doesn't support OPERATION */ |
| if (data->id != lm25056) { |
| info->num_regulators = ARRAY_SIZE(lm25066_reg_desc); |
| info->reg_desc = lm25066_reg_desc; |
| } |
| #endif |
| |
| return pmbus_do_probe(client, info); |
| } |
| |
| /* This is the driver that will be inserted */ |
| static struct i2c_driver lm25066_driver = { |
| .driver = { |
| .name = "lm25066", |
| .of_match_table = of_match_ptr(lm25066_of_match), |
| }, |
| .probe = lm25066_probe, |
| .id_table = lm25066_id, |
| }; |
| |
| module_i2c_driver(lm25066_driver); |
| |
| MODULE_AUTHOR("Guenter Roeck"); |
| MODULE_DESCRIPTION("PMBus driver for LM25066 and compatible chips"); |
| MODULE_LICENSE("GPL"); |
| MODULE_IMPORT_NS(PMBUS); |