blob: 442786685515862e6990e60788a6d0205644070f [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2005, Intec Automation Inc.
* Copyright (C) 2014, Freescale Semiconductor, Inc.
*/
#ifndef __LINUX_MTD_SPI_NOR_INTERNAL_H
#define __LINUX_MTD_SPI_NOR_INTERNAL_H
#include "sfdp.h"
#define SPI_NOR_MAX_ID_LEN 6
/*
* 256 bytes is a sane default for most older flashes. Newer flashes will
* have the page size defined within their SFDP tables.
*/
#define SPI_NOR_DEFAULT_PAGE_SIZE 256
#define SPI_NOR_DEFAULT_N_BANKS 1
#define SPI_NOR_DEFAULT_SECTOR_SIZE SZ_64K
/* Standard SPI NOR flash operations. */
#define SPI_NOR_READID_OP(naddr, ndummy, buf, len) \
SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDID, 0), \
SPI_MEM_OP_ADDR(naddr, 0, 0), \
SPI_MEM_OP_DUMMY(ndummy, 0), \
SPI_MEM_OP_DATA_IN(len, buf, 0))
#define SPI_NOR_WREN_OP \
SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WREN, 0), \
SPI_MEM_OP_NO_ADDR, \
SPI_MEM_OP_NO_DUMMY, \
SPI_MEM_OP_NO_DATA)
#define SPI_NOR_WRDI_OP \
SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRDI, 0), \
SPI_MEM_OP_NO_ADDR, \
SPI_MEM_OP_NO_DUMMY, \
SPI_MEM_OP_NO_DATA)
#define SPI_NOR_RDSR_OP(buf) \
SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDSR, 0), \
SPI_MEM_OP_NO_ADDR, \
SPI_MEM_OP_NO_DUMMY, \
SPI_MEM_OP_DATA_IN(1, buf, 0))
#define SPI_NOR_WRSR_OP(buf, len) \
SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRSR, 0), \
SPI_MEM_OP_NO_ADDR, \
SPI_MEM_OP_NO_DUMMY, \
SPI_MEM_OP_DATA_OUT(len, buf, 0))
#define SPI_NOR_RDSR2_OP(buf) \
SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDSR2, 0), \
SPI_MEM_OP_NO_ADDR, \
SPI_MEM_OP_NO_DUMMY, \
SPI_MEM_OP_DATA_OUT(1, buf, 0))
#define SPI_NOR_WRSR2_OP(buf) \
SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRSR2, 0), \
SPI_MEM_OP_NO_ADDR, \
SPI_MEM_OP_NO_DUMMY, \
SPI_MEM_OP_DATA_OUT(1, buf, 0))
#define SPI_NOR_RDCR_OP(buf) \
SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDCR, 0), \
SPI_MEM_OP_NO_ADDR, \
SPI_MEM_OP_NO_DUMMY, \
SPI_MEM_OP_DATA_IN(1, buf, 0))
#define SPI_NOR_EN4B_EX4B_OP(enable) \
SPI_MEM_OP(SPI_MEM_OP_CMD(enable ? SPINOR_OP_EN4B : SPINOR_OP_EX4B, 0), \
SPI_MEM_OP_NO_ADDR, \
SPI_MEM_OP_NO_DUMMY, \
SPI_MEM_OP_NO_DATA)
#define SPI_NOR_BRWR_OP(buf) \
SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_BRWR, 0), \
SPI_MEM_OP_NO_ADDR, \
SPI_MEM_OP_NO_DUMMY, \
SPI_MEM_OP_DATA_OUT(1, buf, 0))
#define SPI_NOR_GBULK_OP \
SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_GBULK, 0), \
SPI_MEM_OP_NO_ADDR, \
SPI_MEM_OP_NO_DUMMY, \
SPI_MEM_OP_NO_DATA)
#define SPI_NOR_DIE_ERASE_OP(opcode, addr_nbytes, addr, dice) \
SPI_MEM_OP(SPI_MEM_OP_CMD(opcode, 0), \
SPI_MEM_OP_ADDR(dice ? addr_nbytes : 0, addr, 0), \
SPI_MEM_OP_NO_DUMMY, \
SPI_MEM_OP_NO_DATA)
#define SPI_NOR_SECTOR_ERASE_OP(opcode, addr_nbytes, addr) \
SPI_MEM_OP(SPI_MEM_OP_CMD(opcode, 0), \
SPI_MEM_OP_ADDR(addr_nbytes, addr, 0), \
SPI_MEM_OP_NO_DUMMY, \
SPI_MEM_OP_NO_DATA)
#define SPI_NOR_READ_OP(opcode) \
SPI_MEM_OP(SPI_MEM_OP_CMD(opcode, 0), \
SPI_MEM_OP_ADDR(3, 0, 0), \
SPI_MEM_OP_DUMMY(1, 0), \
SPI_MEM_OP_DATA_IN(2, NULL, 0))
#define SPI_NOR_PP_OP(opcode) \
SPI_MEM_OP(SPI_MEM_OP_CMD(opcode, 0), \
SPI_MEM_OP_ADDR(3, 0, 0), \
SPI_MEM_OP_NO_DUMMY, \
SPI_MEM_OP_DATA_OUT(2, NULL, 0))
#define SPINOR_SRSTEN_OP \
SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_SRSTEN, 0), \
SPI_MEM_OP_NO_DUMMY, \
SPI_MEM_OP_NO_ADDR, \
SPI_MEM_OP_NO_DATA)
#define SPINOR_SRST_OP \
SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_SRST, 0), \
SPI_MEM_OP_NO_DUMMY, \
SPI_MEM_OP_NO_ADDR, \
SPI_MEM_OP_NO_DATA)
/* Keep these in sync with the list in debugfs.c */
enum spi_nor_option_flags {
SNOR_F_HAS_SR_TB = BIT(0),
SNOR_F_NO_OP_CHIP_ERASE = BIT(1),
SNOR_F_BROKEN_RESET = BIT(2),
SNOR_F_4B_OPCODES = BIT(3),
SNOR_F_HAS_4BAIT = BIT(4),
SNOR_F_HAS_LOCK = BIT(5),
SNOR_F_HAS_16BIT_SR = BIT(6),
SNOR_F_NO_READ_CR = BIT(7),
SNOR_F_HAS_SR_TB_BIT6 = BIT(8),
SNOR_F_HAS_4BIT_BP = BIT(9),
SNOR_F_HAS_SR_BP3_BIT6 = BIT(10),
SNOR_F_IO_MODE_EN_VOLATILE = BIT(11),
SNOR_F_SOFT_RESET = BIT(12),
SNOR_F_SWP_IS_VOLATILE = BIT(13),
SNOR_F_RWW = BIT(14),
SNOR_F_ECC = BIT(15),
SNOR_F_NO_WP = BIT(16),
};
struct spi_nor_read_command {
u8 num_mode_clocks;
u8 num_wait_states;
u8 opcode;
enum spi_nor_protocol proto;
};
struct spi_nor_pp_command {
u8 opcode;
enum spi_nor_protocol proto;
};
enum spi_nor_read_command_index {
SNOR_CMD_READ,
SNOR_CMD_READ_FAST,
SNOR_CMD_READ_1_1_1_DTR,
/* Dual SPI */
SNOR_CMD_READ_1_1_2,
SNOR_CMD_READ_1_2_2,
SNOR_CMD_READ_2_2_2,
SNOR_CMD_READ_1_2_2_DTR,
/* Quad SPI */
SNOR_CMD_READ_1_1_4,
SNOR_CMD_READ_1_4_4,
SNOR_CMD_READ_4_4_4,
SNOR_CMD_READ_1_4_4_DTR,
/* Octal SPI */
SNOR_CMD_READ_1_1_8,
SNOR_CMD_READ_1_8_8,
SNOR_CMD_READ_8_8_8,
SNOR_CMD_READ_1_8_8_DTR,
SNOR_CMD_READ_8_8_8_DTR,
SNOR_CMD_READ_MAX
};
enum spi_nor_pp_command_index {
SNOR_CMD_PP,
/* Quad SPI */
SNOR_CMD_PP_1_1_4,
SNOR_CMD_PP_1_4_4,
SNOR_CMD_PP_4_4_4,
/* Octal SPI */
SNOR_CMD_PP_1_1_8,
SNOR_CMD_PP_1_8_8,
SNOR_CMD_PP_8_8_8,
SNOR_CMD_PP_8_8_8_DTR,
SNOR_CMD_PP_MAX
};
/**
* struct spi_nor_erase_type - Structure to describe a SPI NOR erase type
* @size: the size of the sector/block erased by the erase type.
* JEDEC JESD216B imposes erase sizes to be a power of 2.
* @size_shift: @size is a power of 2, the shift is stored in
* @size_shift.
* @size_mask: the size mask based on @size_shift.
* @opcode: the SPI command op code to erase the sector/block.
* @idx: Erase Type index as sorted in the Basic Flash Parameter
* Table. It will be used to synchronize the supported
* Erase Types with the ones identified in the SFDP
* optional tables.
*/
struct spi_nor_erase_type {
u32 size;
u32 size_shift;
u32 size_mask;
u8 opcode;
u8 idx;
};
/**
* struct spi_nor_erase_command - Used for non-uniform erases
* The structure is used to describe a list of erase commands to be executed
* once we validate that the erase can be performed. The elements in the list
* are run-length encoded.
* @list: for inclusion into the list of erase commands.
* @count: how many times the same erase command should be
* consecutively used.
* @size: the size of the sector/block erased by the command.
* @opcode: the SPI command op code to erase the sector/block.
*/
struct spi_nor_erase_command {
struct list_head list;
u32 count;
u32 size;
u8 opcode;
};
/**
* struct spi_nor_erase_region - Structure to describe a SPI NOR erase region
* @offset: the offset in the data array of erase region start.
* @size: the size of the region in bytes.
* @erase_mask: bitmask to indicate all the supported erase commands
* inside this region. The erase types are sorted in
* ascending order with the smallest Erase Type size being
* at BIT(0).
* @overlaid: determine if this region is overlaid.
*/
struct spi_nor_erase_region {
u64 offset;
u64 size;
u8 erase_mask;
bool overlaid;
};
#define SNOR_ERASE_TYPE_MAX 4
/**
* struct spi_nor_erase_map - Structure to describe the SPI NOR erase map
* @regions: array of erase regions. The regions are consecutive in
* address space. Walking through the regions is done
* incrementally.
* @uniform_region: a pre-allocated erase region for SPI NOR with a uniform
* sector size (legacy implementation).
* @erase_type: an array of erase types shared by all the regions.
* The erase types are sorted in ascending order, with the
* smallest Erase Type size being the first member in the
* erase_type array.
* @n_regions: number of erase regions.
*/
struct spi_nor_erase_map {
struct spi_nor_erase_region *regions;
struct spi_nor_erase_region uniform_region;
struct spi_nor_erase_type erase_type[SNOR_ERASE_TYPE_MAX];
unsigned int n_regions;
};
/**
* struct spi_nor_locking_ops - SPI NOR locking methods
* @lock: lock a region of the SPI NOR.
* @unlock: unlock a region of the SPI NOR.
* @is_locked: check if a region of the SPI NOR is completely locked
*/
struct spi_nor_locking_ops {
int (*lock)(struct spi_nor *nor, loff_t ofs, u64 len);
int (*unlock)(struct spi_nor *nor, loff_t ofs, u64 len);
int (*is_locked)(struct spi_nor *nor, loff_t ofs, u64 len);
};
/**
* struct spi_nor_otp_organization - Structure to describe the SPI NOR OTP regions
* @len: size of one OTP region in bytes.
* @base: start address of the OTP area.
* @offset: offset between consecutive OTP regions if there are more
* than one.
* @n_regions: number of individual OTP regions.
*/
struct spi_nor_otp_organization {
size_t len;
loff_t base;
loff_t offset;
unsigned int n_regions;
};
/**
* struct spi_nor_otp_ops - SPI NOR OTP methods
* @read: read from the SPI NOR OTP area.
* @write: write to the SPI NOR OTP area.
* @lock: lock an OTP region.
* @erase: erase an OTP region.
* @is_locked: check if an OTP region of the SPI NOR is locked.
*/
struct spi_nor_otp_ops {
int (*read)(struct spi_nor *nor, loff_t addr, size_t len, u8 *buf);
int (*write)(struct spi_nor *nor, loff_t addr, size_t len,
const u8 *buf);
int (*lock)(struct spi_nor *nor, unsigned int region);
int (*erase)(struct spi_nor *nor, loff_t addr);
int (*is_locked)(struct spi_nor *nor, unsigned int region);
};
/**
* struct spi_nor_otp - SPI NOR OTP grouping structure
* @org: OTP region organization
* @ops: OTP access ops
*/
struct spi_nor_otp {
const struct spi_nor_otp_organization *org;
const struct spi_nor_otp_ops *ops;
};
/**
* struct spi_nor_flash_parameter - SPI NOR flash parameters and settings.
* Includes legacy flash parameters and settings that can be overwritten
* by the spi_nor_fixups hooks, or dynamically when parsing the JESD216
* Serial Flash Discoverable Parameters (SFDP) tables.
*
* @bank_size: the flash memory bank density in bytes.
* @size: the total flash memory density in bytes.
* @writesize Minimal writable flash unit size. Defaults to 1. Set to
* ECC unit size for ECC-ed flashes.
* @page_size: the page size of the SPI NOR flash memory.
* @addr_nbytes: number of address bytes to send.
* @addr_mode_nbytes: number of address bytes of current address mode. Useful
* when the flash operates with 4B opcodes but needs the
* internal address mode for opcodes that don't have a 4B
* opcode correspondent.
* @rdsr_dummy: dummy cycles needed for Read Status Register command
* in octal DTR mode.
* @rdsr_addr_nbytes: dummy address bytes needed for Read Status Register
* command in octal DTR mode.
* @n_banks: number of banks.
* @n_dice: number of dice in the flash memory.
* @die_erase_opcode: die erase opcode. Defaults to SPINOR_OP_CHIP_ERASE.
* @vreg_offset: volatile register offset for each die.
* @hwcaps: describes the read and page program hardware
* capabilities.
* @reads: read capabilities ordered by priority: the higher index
* in the array, the higher priority.
* @page_programs: page program capabilities ordered by priority: the
* higher index in the array, the higher priority.
* @erase_map: the erase map parsed from the SFDP Sector Map Parameter
* Table.
* @otp: SPI NOR OTP info.
* @set_octal_dtr: enables or disables SPI NOR octal DTR mode.
* @quad_enable: enables SPI NOR quad mode.
* @set_4byte_addr_mode: puts the SPI NOR in 4 byte addressing mode.
* @convert_addr: converts an absolute address into something the flash
* will understand. Particularly useful when pagesize is
* not a power-of-2.
* @setup: (optional) configures the SPI NOR memory. Useful for
* SPI NOR flashes that have peculiarities to the SPI NOR
* standard e.g. different opcodes, specific address
* calculation, page size, etc.
* @ready: (optional) flashes might use a different mechanism
* than reading the status register to indicate they
* are ready for a new command
* @locking_ops: SPI NOR locking methods.
* @priv: flash's private data.
*/
struct spi_nor_flash_parameter {
u64 bank_size;
u64 size;
u32 writesize;
u32 page_size;
u8 addr_nbytes;
u8 addr_mode_nbytes;
u8 rdsr_dummy;
u8 rdsr_addr_nbytes;
u8 n_banks;
u8 n_dice;
u8 die_erase_opcode;
u32 *vreg_offset;
struct spi_nor_hwcaps hwcaps;
struct spi_nor_read_command reads[SNOR_CMD_READ_MAX];
struct spi_nor_pp_command page_programs[SNOR_CMD_PP_MAX];
struct spi_nor_erase_map erase_map;
struct spi_nor_otp otp;
int (*set_octal_dtr)(struct spi_nor *nor, bool enable);
int (*quad_enable)(struct spi_nor *nor);
int (*set_4byte_addr_mode)(struct spi_nor *nor, bool enable);
u32 (*convert_addr)(struct spi_nor *nor, u32 addr);
int (*setup)(struct spi_nor *nor, const struct spi_nor_hwcaps *hwcaps);
int (*ready)(struct spi_nor *nor);
const struct spi_nor_locking_ops *locking_ops;
void *priv;
};
/**
* struct spi_nor_fixups - SPI NOR fixup hooks
* @default_init: called after default flash parameters init. Used to tweak
* flash parameters when information provided by the flash_info
* table is incomplete or wrong.
* @post_bfpt: called after the BFPT table has been parsed
* @post_sfdp: called after SFDP has been parsed (is also called for SPI NORs
* that do not support RDSFDP). Typically used to tweak various
* parameters that could not be extracted by other means (i.e.
* when information provided by the SFDP/flash_info tables are
* incomplete or wrong).
* @late_init: used to initialize flash parameters that are not declared in the
* JESD216 SFDP standard, or where SFDP tables not defined at all.
* Will replace the default_init() hook.
*
* Those hooks can be used to tweak the SPI NOR configuration when the SFDP
* table is broken or not available.
*/
struct spi_nor_fixups {
void (*default_init)(struct spi_nor *nor);
int (*post_bfpt)(struct spi_nor *nor,
const struct sfdp_parameter_header *bfpt_header,
const struct sfdp_bfpt *bfpt);
int (*post_sfdp)(struct spi_nor *nor);
int (*late_init)(struct spi_nor *nor);
};
/**
* struct spi_nor_id - SPI NOR flash ID.
*
* @bytes: the bytes returned by the flash when issuing command 9F. Typically,
* the first byte is the manufacturer ID code (see JEP106) and the next
* two bytes are a flash part specific ID.
* @len: the number of bytes of ID.
*/
struct spi_nor_id {
const u8 *bytes;
u8 len;
};
/**
* struct flash_info - SPI NOR flash_info entry.
* @id: pointer to struct spi_nor_id or NULL, which means "no ID" (mostly
* older chips).
* @name: (obsolete) the name of the flash. Do not set it for new additions.
* @size: the size of the flash in bytes.
* @sector_size: (optional) the size listed here is what works with
* SPINOR_OP_SE, which isn't necessarily called a "sector" by
* the vendor. Defaults to 64k.
* @n_banks: (optional) the number of banks. Defaults to 1.
* @page_size: (optional) the flash's page size. Defaults to 256.
* @addr_nbytes: number of address bytes to send.
*
* @flags: flags that indicate support that is not defined by the
* JESD216 standard in its SFDP tables. Flag meanings:
* SPI_NOR_HAS_LOCK: flash supports lock/unlock via SR
* SPI_NOR_HAS_TB: flash SR has Top/Bottom (TB) protect bit. Must be
* used with SPI_NOR_HAS_LOCK.
* SPI_NOR_TB_SR_BIT6: Top/Bottom (TB) is bit 6 of status register.
* Must be used with SPI_NOR_HAS_TB.
* SPI_NOR_4BIT_BP: flash SR has 4 bit fields (BP0-3) for block
* protection.
* SPI_NOR_BP3_SR_BIT6: BP3 is bit 6 of status register. Must be used with
* SPI_NOR_4BIT_BP.
* SPI_NOR_SWP_IS_VOLATILE: flash has volatile software write protection bits.
* Usually these will power-up in a write-protected
* state.
* SPI_NOR_NO_ERASE: no erase command needed.
* SPI_NOR_NO_FR: can't do fastread.
* SPI_NOR_QUAD_PP: flash supports Quad Input Page Program.
* SPI_NOR_RWW: flash supports reads while write.
*
* @no_sfdp_flags: flags that indicate support that can be discovered via SFDP.
* Used when SFDP tables are not defined in the flash. These
* flags are used together with the SPI_NOR_SKIP_SFDP flag.
* SPI_NOR_SKIP_SFDP: skip parsing of SFDP tables.
* SECT_4K: SPINOR_OP_BE_4K works uniformly.
* SPI_NOR_DUAL_READ: flash supports Dual Read.
* SPI_NOR_QUAD_READ: flash supports Quad Read.
* SPI_NOR_OCTAL_READ: flash supports Octal Read.
* SPI_NOR_OCTAL_DTR_READ: flash supports octal DTR Read.
* SPI_NOR_OCTAL_DTR_PP: flash supports Octal DTR Page Program.
*
* @fixup_flags: flags that indicate support that can be discovered via SFDP
* ideally, but can not be discovered for this particular flash
* because the SFDP table that indicates this support is not
* defined by the flash. In case the table for this support is
* defined but has wrong values, one should instead use a
* post_sfdp() hook to set the SNOR_F equivalent flag.
*
* SPI_NOR_4B_OPCODES: use dedicated 4byte address op codes to support
* memory size above 128Mib.
* SPI_NOR_IO_MODE_EN_VOLATILE: flash enables the best available I/O mode
* via a volatile bit.
* @mfr_flags: manufacturer private flags. Used in the manufacturer fixup
* hooks to differentiate support between flashes of the same
* manufacturer.
* @otp_org: flash's OTP organization.
* @fixups: part specific fixup hooks.
*/
struct flash_info {
char *name;
const struct spi_nor_id *id;
size_t size;
unsigned sector_size;
u16 page_size;
u8 n_banks;
u8 addr_nbytes;
u16 flags;
#define SPI_NOR_HAS_LOCK BIT(0)
#define SPI_NOR_HAS_TB BIT(1)
#define SPI_NOR_TB_SR_BIT6 BIT(2)
#define SPI_NOR_4BIT_BP BIT(3)
#define SPI_NOR_BP3_SR_BIT6 BIT(4)
#define SPI_NOR_SWP_IS_VOLATILE BIT(5)
#define SPI_NOR_NO_ERASE BIT(6)
#define SPI_NOR_NO_FR BIT(7)
#define SPI_NOR_QUAD_PP BIT(8)
#define SPI_NOR_RWW BIT(9)
u8 no_sfdp_flags;
#define SPI_NOR_SKIP_SFDP BIT(0)
#define SECT_4K BIT(1)
#define SPI_NOR_DUAL_READ BIT(3)
#define SPI_NOR_QUAD_READ BIT(4)
#define SPI_NOR_OCTAL_READ BIT(5)
#define SPI_NOR_OCTAL_DTR_READ BIT(6)
#define SPI_NOR_OCTAL_DTR_PP BIT(7)
u8 fixup_flags;
#define SPI_NOR_4B_OPCODES BIT(0)
#define SPI_NOR_IO_MODE_EN_VOLATILE BIT(1)
u8 mfr_flags;
const struct spi_nor_otp_organization *otp;
const struct spi_nor_fixups *fixups;
};
#define SNOR_ID(...) \
(&(const struct spi_nor_id){ \
.bytes = (const u8[]){ __VA_ARGS__ }, \
.len = sizeof((u8[]){ __VA_ARGS__ }), \
})
#define SNOR_OTP(_len, _n_regions, _base, _offset) \
(&(const struct spi_nor_otp_organization){ \
.len = (_len), \
.base = (_base), \
.offset = (_offset), \
.n_regions = (_n_regions), \
})
/**
* struct spi_nor_manufacturer - SPI NOR manufacturer object
* @name: manufacturer name
* @parts: array of parts supported by this manufacturer
* @nparts: number of entries in the parts array
* @fixups: hooks called at various points in time during spi_nor_scan()
*/
struct spi_nor_manufacturer {
const char *name;
const struct flash_info *parts;
unsigned int nparts;
const struct spi_nor_fixups *fixups;
};
/**
* struct sfdp - SFDP data
* @num_dwords: number of entries in the dwords array
* @dwords: array of double words of the SFDP data
*/
struct sfdp {
size_t num_dwords;
u32 *dwords;
};
/* Manufacturer drivers. */
extern const struct spi_nor_manufacturer spi_nor_atmel;
extern const struct spi_nor_manufacturer spi_nor_eon;
extern const struct spi_nor_manufacturer spi_nor_esmt;
extern const struct spi_nor_manufacturer spi_nor_everspin;
extern const struct spi_nor_manufacturer spi_nor_gigadevice;
extern const struct spi_nor_manufacturer spi_nor_intel;
extern const struct spi_nor_manufacturer spi_nor_issi;
extern const struct spi_nor_manufacturer spi_nor_macronix;
extern const struct spi_nor_manufacturer spi_nor_micron;
extern const struct spi_nor_manufacturer spi_nor_st;
extern const struct spi_nor_manufacturer spi_nor_spansion;
extern const struct spi_nor_manufacturer spi_nor_sst;
extern const struct spi_nor_manufacturer spi_nor_winbond;
extern const struct spi_nor_manufacturer spi_nor_xilinx;
extern const struct spi_nor_manufacturer spi_nor_xmc;
extern const struct attribute_group *spi_nor_sysfs_groups[];
void spi_nor_spimem_setup_op(const struct spi_nor *nor,
struct spi_mem_op *op,
const enum spi_nor_protocol proto);
int spi_nor_write_enable(struct spi_nor *nor);
int spi_nor_write_disable(struct spi_nor *nor);
int spi_nor_set_4byte_addr_mode_en4b_ex4b(struct spi_nor *nor, bool enable);
int spi_nor_set_4byte_addr_mode_wren_en4b_ex4b(struct spi_nor *nor,
bool enable);
int spi_nor_set_4byte_addr_mode_brwr(struct spi_nor *nor, bool enable);
int spi_nor_set_4byte_addr_mode(struct spi_nor *nor, bool enable);
int spi_nor_wait_till_ready(struct spi_nor *nor);
int spi_nor_global_block_unlock(struct spi_nor *nor);
int spi_nor_prep_and_lock(struct spi_nor *nor);
void spi_nor_unlock_and_unprep(struct spi_nor *nor);
int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor);
int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor);
int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor);
int spi_nor_read_id(struct spi_nor *nor, u8 naddr, u8 ndummy, u8 *id,
enum spi_nor_protocol reg_proto);
int spi_nor_read_sr(struct spi_nor *nor, u8 *sr);
int spi_nor_sr_ready(struct spi_nor *nor);
int spi_nor_read_cr(struct spi_nor *nor, u8 *cr);
int spi_nor_write_sr(struct spi_nor *nor, const u8 *sr, size_t len);
int spi_nor_write_sr_and_check(struct spi_nor *nor, u8 sr1);
int spi_nor_write_16bit_cr_and_check(struct spi_nor *nor, u8 cr);
ssize_t spi_nor_read_data(struct spi_nor *nor, loff_t from, size_t len,
u8 *buf);
ssize_t spi_nor_write_data(struct spi_nor *nor, loff_t to, size_t len,
const u8 *buf);
int spi_nor_read_any_reg(struct spi_nor *nor, struct spi_mem_op *op,
enum spi_nor_protocol proto);
int spi_nor_write_any_volatile_reg(struct spi_nor *nor, struct spi_mem_op *op,
enum spi_nor_protocol proto);
int spi_nor_erase_sector(struct spi_nor *nor, u32 addr);
int spi_nor_otp_read_secr(struct spi_nor *nor, loff_t addr, size_t len, u8 *buf);
int spi_nor_otp_write_secr(struct spi_nor *nor, loff_t addr, size_t len,
const u8 *buf);
int spi_nor_otp_erase_secr(struct spi_nor *nor, loff_t addr);
int spi_nor_otp_lock_sr2(struct spi_nor *nor, unsigned int region);
int spi_nor_otp_is_locked_sr2(struct spi_nor *nor, unsigned int region);
int spi_nor_hwcaps_read2cmd(u32 hwcaps);
int spi_nor_hwcaps_pp2cmd(u32 hwcaps);
u8 spi_nor_convert_3to4_read(u8 opcode);
void spi_nor_set_read_settings(struct spi_nor_read_command *read,
u8 num_mode_clocks,
u8 num_wait_states,
u8 opcode,
enum spi_nor_protocol proto);
void spi_nor_set_pp_settings(struct spi_nor_pp_command *pp, u8 opcode,
enum spi_nor_protocol proto);
void spi_nor_set_erase_type(struct spi_nor_erase_type *erase, u32 size,
u8 opcode);
void spi_nor_mask_erase_type(struct spi_nor_erase_type *erase);
void spi_nor_init_uniform_erase_map(struct spi_nor_erase_map *map,
u8 erase_mask, u64 flash_size);
int spi_nor_post_bfpt_fixups(struct spi_nor *nor,
const struct sfdp_parameter_header *bfpt_header,
const struct sfdp_bfpt *bfpt);
void spi_nor_init_default_locking_ops(struct spi_nor *nor);
void spi_nor_try_unlock_all(struct spi_nor *nor);
void spi_nor_set_mtd_locking_ops(struct spi_nor *nor);
void spi_nor_set_mtd_otp_ops(struct spi_nor *nor);
int spi_nor_controller_ops_read_reg(struct spi_nor *nor, u8 opcode,
u8 *buf, size_t len);
int spi_nor_controller_ops_write_reg(struct spi_nor *nor, u8 opcode,
const u8 *buf, size_t len);
int spi_nor_check_sfdp_signature(struct spi_nor *nor);
int spi_nor_parse_sfdp(struct spi_nor *nor);
static inline struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd)
{
return container_of(mtd, struct spi_nor, mtd);
}
/**
* spi_nor_needs_sfdp() - returns true if SFDP parsing is used for this flash.
*
* Return: true if SFDP parsing is needed
*/
static inline bool spi_nor_needs_sfdp(const struct spi_nor *nor)
{
/*
* The flash size is one property parsed by the SFDP. We use it as an
* indicator whether we need SFDP parsing for a particular flash. I.e.
* non-legacy flash entries in flash_info will have a size of zero iff
* SFDP should be used.
*/
return !nor->info->size;
}
#ifdef CONFIG_DEBUG_FS
void spi_nor_debugfs_register(struct spi_nor *nor);
void spi_nor_debugfs_shutdown(void);
#else
static inline void spi_nor_debugfs_register(struct spi_nor *nor) {}
static inline void spi_nor_debugfs_shutdown(void) {}
#endif
#endif /* __LINUX_MTD_SPI_NOR_INTERNAL_H */