| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * I2C link layer for the NXP NCI driver |
| * |
| * Copyright (C) 2014 NXP Semiconductors All rights reserved. |
| * Copyright (C) 2012-2015 Intel Corporation. All rights reserved. |
| * |
| * Authors: Clément Perrochaud <clement.perrochaud@nxp.com> |
| * Authors: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com> |
| * |
| * Derived from PN544 device driver: |
| * Copyright (C) 2012 Intel Corporation. All rights reserved. |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/delay.h> |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/nfc.h> |
| #include <linux/gpio/consumer.h> |
| #include <asm/unaligned.h> |
| |
| #include <net/nfc/nfc.h> |
| |
| #include "nxp-nci.h" |
| |
| #define NXP_NCI_I2C_DRIVER_NAME "nxp-nci_i2c" |
| |
| #define NXP_NCI_I2C_MAX_PAYLOAD 32 |
| |
| struct nxp_nci_i2c_phy { |
| struct i2c_client *i2c_dev; |
| struct nci_dev *ndev; |
| |
| struct gpio_desc *gpiod_en; |
| struct gpio_desc *gpiod_fw; |
| |
| int hard_fault; /* |
| * < 0 if hardware error occurred (e.g. i2c err) |
| * and prevents normal operation. |
| */ |
| }; |
| |
| static int nxp_nci_i2c_set_mode(void *phy_id, |
| enum nxp_nci_mode mode) |
| { |
| struct nxp_nci_i2c_phy *phy = (struct nxp_nci_i2c_phy *) phy_id; |
| |
| gpiod_set_value(phy->gpiod_fw, (mode == NXP_NCI_MODE_FW) ? 1 : 0); |
| gpiod_set_value(phy->gpiod_en, (mode != NXP_NCI_MODE_COLD) ? 1 : 0); |
| usleep_range(10000, 15000); |
| |
| if (mode == NXP_NCI_MODE_COLD) |
| phy->hard_fault = 0; |
| |
| return 0; |
| } |
| |
| static int nxp_nci_i2c_write(void *phy_id, struct sk_buff *skb) |
| { |
| int r; |
| struct nxp_nci_i2c_phy *phy = phy_id; |
| struct i2c_client *client = phy->i2c_dev; |
| |
| if (phy->hard_fault != 0) |
| return phy->hard_fault; |
| |
| r = i2c_master_send(client, skb->data, skb->len); |
| if (r < 0) { |
| /* Retry, chip was in standby */ |
| msleep(110); |
| r = i2c_master_send(client, skb->data, skb->len); |
| } |
| |
| if (r < 0) { |
| nfc_err(&client->dev, "Error %d on I2C send\n", r); |
| } else if (r != skb->len) { |
| nfc_err(&client->dev, |
| "Invalid length sent: %u (expected %u)\n", |
| r, skb->len); |
| r = -EREMOTEIO; |
| } else { |
| /* Success but return 0 and not number of bytes */ |
| r = 0; |
| } |
| |
| return r; |
| } |
| |
| static const struct nxp_nci_phy_ops i2c_phy_ops = { |
| .set_mode = nxp_nci_i2c_set_mode, |
| .write = nxp_nci_i2c_write, |
| }; |
| |
| static int nxp_nci_i2c_fw_read(struct nxp_nci_i2c_phy *phy, |
| struct sk_buff **skb) |
| { |
| struct i2c_client *client = phy->i2c_dev; |
| size_t frame_len; |
| __be16 header; |
| int r; |
| |
| r = i2c_master_recv(client, (u8 *) &header, NXP_NCI_FW_HDR_LEN); |
| if (r < 0) { |
| goto fw_read_exit; |
| } else if (r != NXP_NCI_FW_HDR_LEN) { |
| nfc_err(&client->dev, "Incorrect header length: %u\n", r); |
| r = -EBADMSG; |
| goto fw_read_exit; |
| } |
| |
| frame_len = (be16_to_cpu(header) & NXP_NCI_FW_FRAME_LEN_MASK) + |
| NXP_NCI_FW_CRC_LEN; |
| |
| *skb = alloc_skb(NXP_NCI_FW_HDR_LEN + frame_len, GFP_KERNEL); |
| if (*skb == NULL) { |
| r = -ENOMEM; |
| goto fw_read_exit; |
| } |
| |
| skb_put_data(*skb, &header, NXP_NCI_FW_HDR_LEN); |
| |
| r = i2c_master_recv(client, skb_put(*skb, frame_len), frame_len); |
| if (r < 0) { |
| goto fw_read_exit_free_skb; |
| } else if (r != frame_len) { |
| nfc_err(&client->dev, |
| "Invalid frame length: %u (expected %zu)\n", |
| r, frame_len); |
| r = -EBADMSG; |
| goto fw_read_exit_free_skb; |
| } |
| |
| return 0; |
| |
| fw_read_exit_free_skb: |
| kfree_skb(*skb); |
| fw_read_exit: |
| return r; |
| } |
| |
| static int nxp_nci_i2c_nci_read(struct nxp_nci_i2c_phy *phy, |
| struct sk_buff **skb) |
| { |
| struct nci_ctrl_hdr header; /* May actually be a data header */ |
| struct i2c_client *client = phy->i2c_dev; |
| int r; |
| |
| r = i2c_master_recv(client, (u8 *) &header, NCI_CTRL_HDR_SIZE); |
| if (r < 0) { |
| goto nci_read_exit; |
| } else if (r != NCI_CTRL_HDR_SIZE) { |
| nfc_err(&client->dev, "Incorrect header length: %u\n", r); |
| r = -EBADMSG; |
| goto nci_read_exit; |
| } |
| |
| *skb = alloc_skb(NCI_CTRL_HDR_SIZE + header.plen, GFP_KERNEL); |
| if (*skb == NULL) { |
| r = -ENOMEM; |
| goto nci_read_exit; |
| } |
| |
| skb_put_data(*skb, (void *)&header, NCI_CTRL_HDR_SIZE); |
| |
| if (!header.plen) |
| return 0; |
| |
| r = i2c_master_recv(client, skb_put(*skb, header.plen), header.plen); |
| if (r < 0) { |
| goto nci_read_exit_free_skb; |
| } else if (r != header.plen) { |
| nfc_err(&client->dev, |
| "Invalid frame payload length: %u (expected %u)\n", |
| r, header.plen); |
| r = -EBADMSG; |
| goto nci_read_exit_free_skb; |
| } |
| |
| return 0; |
| |
| nci_read_exit_free_skb: |
| kfree_skb(*skb); |
| nci_read_exit: |
| return r; |
| } |
| |
| static irqreturn_t nxp_nci_i2c_irq_thread_fn(int irq, void *phy_id) |
| { |
| struct nxp_nci_i2c_phy *phy = phy_id; |
| struct i2c_client *client; |
| struct nxp_nci_info *info; |
| |
| struct sk_buff *skb = NULL; |
| int r = 0; |
| |
| if (!phy || !phy->ndev) |
| goto exit_irq_none; |
| |
| client = phy->i2c_dev; |
| |
| if (!client || irq != client->irq) |
| goto exit_irq_none; |
| |
| info = nci_get_drvdata(phy->ndev); |
| |
| if (!info) |
| goto exit_irq_none; |
| |
| mutex_lock(&info->info_lock); |
| |
| if (phy->hard_fault != 0) |
| goto exit_irq_handled; |
| |
| switch (info->mode) { |
| case NXP_NCI_MODE_NCI: |
| r = nxp_nci_i2c_nci_read(phy, &skb); |
| break; |
| case NXP_NCI_MODE_FW: |
| r = nxp_nci_i2c_fw_read(phy, &skb); |
| break; |
| case NXP_NCI_MODE_COLD: |
| r = -EREMOTEIO; |
| break; |
| } |
| |
| if (r == -EREMOTEIO) { |
| phy->hard_fault = r; |
| if (info->mode == NXP_NCI_MODE_FW) |
| nxp_nci_fw_recv_frame(phy->ndev, NULL); |
| } |
| if (r < 0) { |
| nfc_err(&client->dev, "Read failed with error %d\n", r); |
| goto exit_irq_handled; |
| } |
| |
| switch (info->mode) { |
| case NXP_NCI_MODE_NCI: |
| nci_recv_frame(phy->ndev, skb); |
| break; |
| case NXP_NCI_MODE_FW: |
| nxp_nci_fw_recv_frame(phy->ndev, skb); |
| break; |
| case NXP_NCI_MODE_COLD: |
| break; |
| } |
| |
| exit_irq_handled: |
| mutex_unlock(&info->info_lock); |
| return IRQ_HANDLED; |
| exit_irq_none: |
| WARN_ON_ONCE(1); |
| return IRQ_NONE; |
| } |
| |
| static const struct acpi_gpio_params firmware_gpios = { 1, 0, false }; |
| static const struct acpi_gpio_params enable_gpios = { 2, 0, false }; |
| |
| static const struct acpi_gpio_mapping acpi_nxp_nci_gpios[] = { |
| { "enable-gpios", &enable_gpios, 1 }, |
| { "firmware-gpios", &firmware_gpios, 1 }, |
| { } |
| }; |
| |
| static int nxp_nci_i2c_probe(struct i2c_client *client) |
| { |
| struct device *dev = &client->dev; |
| struct nxp_nci_i2c_phy *phy; |
| int r; |
| |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { |
| nfc_err(&client->dev, "Need I2C_FUNC_I2C\n"); |
| return -ENODEV; |
| } |
| |
| phy = devm_kzalloc(&client->dev, sizeof(struct nxp_nci_i2c_phy), |
| GFP_KERNEL); |
| if (!phy) |
| return -ENOMEM; |
| |
| phy->i2c_dev = client; |
| i2c_set_clientdata(client, phy); |
| |
| r = devm_acpi_dev_add_driver_gpios(dev, acpi_nxp_nci_gpios); |
| if (r) |
| dev_dbg(dev, "Unable to add GPIO mapping table\n"); |
| |
| phy->gpiod_en = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); |
| if (IS_ERR(phy->gpiod_en)) { |
| nfc_err(dev, "Failed to get EN gpio\n"); |
| return PTR_ERR(phy->gpiod_en); |
| } |
| |
| phy->gpiod_fw = devm_gpiod_get_optional(dev, "firmware", GPIOD_OUT_LOW); |
| if (IS_ERR(phy->gpiod_fw)) { |
| nfc_err(dev, "Failed to get FW gpio\n"); |
| return PTR_ERR(phy->gpiod_fw); |
| } |
| |
| r = nxp_nci_probe(phy, &client->dev, &i2c_phy_ops, |
| NXP_NCI_I2C_MAX_PAYLOAD, &phy->ndev); |
| if (r < 0) |
| return r; |
| |
| r = request_threaded_irq(client->irq, NULL, |
| nxp_nci_i2c_irq_thread_fn, |
| IRQF_TRIGGER_RISING | IRQF_ONESHOT, |
| NXP_NCI_I2C_DRIVER_NAME, phy); |
| if (r < 0) |
| nfc_err(&client->dev, "Unable to register IRQ handler\n"); |
| |
| return r; |
| } |
| |
| static void nxp_nci_i2c_remove(struct i2c_client *client) |
| { |
| struct nxp_nci_i2c_phy *phy = i2c_get_clientdata(client); |
| |
| nxp_nci_remove(phy->ndev); |
| free_irq(client->irq, phy); |
| } |
| |
| static const struct i2c_device_id nxp_nci_i2c_id_table[] = { |
| {"nxp-nci_i2c", 0}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, nxp_nci_i2c_id_table); |
| |
| static const struct of_device_id of_nxp_nci_i2c_match[] = { |
| { .compatible = "nxp,nxp-nci-i2c", }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, of_nxp_nci_i2c_match); |
| |
| #ifdef CONFIG_ACPI |
| static const struct acpi_device_id acpi_id[] = { |
| { "NXP1001" }, |
| { "NXP1002" }, |
| { "NXP7471" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(acpi, acpi_id); |
| #endif |
| |
| static struct i2c_driver nxp_nci_i2c_driver = { |
| .driver = { |
| .name = NXP_NCI_I2C_DRIVER_NAME, |
| .acpi_match_table = ACPI_PTR(acpi_id), |
| .of_match_table = of_nxp_nci_i2c_match, |
| }, |
| .probe = nxp_nci_i2c_probe, |
| .id_table = nxp_nci_i2c_id_table, |
| .remove = nxp_nci_i2c_remove, |
| }; |
| |
| module_i2c_driver(nxp_nci_i2c_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("I2C driver for NXP NCI NFC controllers"); |
| MODULE_AUTHOR("Clément Perrochaud <clement.perrochaud@nxp.com>"); |
| MODULE_AUTHOR("Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>"); |