| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * ACPI PCI Hot Plug Extension for Ampere Altra. Allows control of |
| * attention LEDs via requests to system firmware. |
| * |
| * Copyright (C) 2023 Ampere Computing LLC |
| */ |
| |
| #define pr_fmt(fmt) "acpiphp_ampere_altra: " fmt |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/pci_hotplug.h> |
| #include <linux/platform_device.h> |
| |
| #include "acpiphp.h" |
| |
| #define HANDLE_OPEN 0xb0200000 |
| #define HANDLE_CLOSE 0xb0300000 |
| #define REQUEST 0xf0700000 |
| #define LED_CMD 0x00000004 |
| #define LED_ATTENTION 0x00000002 |
| #define LED_SET_ON 0x00000001 |
| #define LED_SET_OFF 0x00000002 |
| #define LED_SET_BLINK 0x00000003 |
| |
| static u32 led_service_id[4]; |
| |
| static int led_status(u8 status) |
| { |
| switch (status) { |
| case 1: return LED_SET_ON; |
| case 2: return LED_SET_BLINK; |
| default: return LED_SET_OFF; |
| } |
| } |
| |
| static int set_attention_status(struct hotplug_slot *slot, u8 status) |
| { |
| struct arm_smccc_res res; |
| struct pci_bus *bus; |
| struct pci_dev *root_port; |
| unsigned long flags; |
| u32 handle; |
| int ret = 0; |
| |
| bus = slot->pci_slot->bus; |
| root_port = pcie_find_root_port(bus->self); |
| if (!root_port) |
| return -ENODEV; |
| |
| local_irq_save(flags); |
| arm_smccc_smc(HANDLE_OPEN, led_service_id[0], led_service_id[1], |
| led_service_id[2], led_service_id[3], 0, 0, 0, &res); |
| if (res.a0) { |
| ret = -ENODEV; |
| goto out; |
| } |
| handle = res.a1 & 0xffff0000; |
| |
| arm_smccc_smc(REQUEST, LED_CMD, led_status(status), LED_ATTENTION, |
| (PCI_SLOT(root_port->devfn) << 4) | (pci_domain_nr(bus) & 0xf), |
| 0, 0, handle, &res); |
| if (res.a0) |
| ret = -ENODEV; |
| |
| arm_smccc_smc(HANDLE_CLOSE, handle, 0, 0, 0, 0, 0, 0, &res); |
| |
| out: |
| local_irq_restore(flags); |
| return ret; |
| } |
| |
| static int get_attention_status(struct hotplug_slot *slot, u8 *status) |
| { |
| return -EINVAL; |
| } |
| |
| static struct acpiphp_attention_info ampere_altra_attn = { |
| .set_attn = set_attention_status, |
| .get_attn = get_attention_status, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int altra_led_probe(struct platform_device *pdev) |
| { |
| struct fwnode_handle *fwnode = dev_fwnode(&pdev->dev); |
| int ret; |
| |
| ret = fwnode_property_read_u32_array(fwnode, "uuid", led_service_id, 4); |
| if (ret) { |
| dev_err(&pdev->dev, "can't find uuid\n"); |
| return ret; |
| } |
| |
| ret = acpiphp_register_attention(&ere_altra_attn); |
| if (ret) { |
| dev_err(&pdev->dev, "can't register driver\n"); |
| return ret; |
| } |
| return 0; |
| } |
| |
| static void altra_led_remove(struct platform_device *pdev) |
| { |
| acpiphp_unregister_attention(&ere_altra_attn); |
| } |
| |
| static const struct acpi_device_id altra_led_ids[] = { |
| { "AMPC0008", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(acpi, altra_led_ids); |
| |
| static struct platform_driver altra_led_driver = { |
| .driver = { |
| .name = "ampere-altra-leds", |
| .acpi_match_table = altra_led_ids, |
| }, |
| .probe = altra_led_probe, |
| .remove_new = altra_led_remove, |
| }; |
| module_platform_driver(altra_led_driver); |
| |
| MODULE_AUTHOR("D Scott Phillips <scott@os.amperecomputing.com>"); |
| MODULE_LICENSE("GPL"); |