blob: f10afa3d7ff5176fce5cf68bd91f0d1a2c289679 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-only
#
# Phy drivers for Samsung platforms
#
config PHY_EXYNOS_DP_VIDEO
tristate "Exynos SoC series Display Port PHY driver"
depends on OF
depends on ARCH_EXYNOS || COMPILE_TEST
default ARCH_EXYNOS
select GENERIC_PHY
help
Support for Display Port PHY found on Samsung Exynos SoCs.
config PHY_EXYNOS_MIPI_VIDEO
tristate "S5P/Exynos SoC series MIPI CSI-2/DSI PHY driver"
depends on HAS_IOMEM
depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
select GENERIC_PHY
default y if ARCH_S5PV210 || ARCH_EXYNOS
help
Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
and Exynos SoCs.
config PHY_EXYNOS_PCIE
bool "Exynos PCIe PHY driver"
depends on OF && (ARCH_EXYNOS || COMPILE_TEST)
select GENERIC_PHY
help
Enable PCIe PHY support for Exynos SoC series.
This driver provides PHY interface for Exynos PCIe controller.
config PHY_SAMSUNG_UFS
tristate "Exynos SoC series UFS PHY driver"
depends on OF && (ARCH_EXYNOS || COMPILE_TEST)
select GENERIC_PHY
help
Enable this to support the Samsung Exynos SoC UFS PHY driver for
Samsung Exynos SoCs. This driver provides the interface for UFS host
controller to do PHY related programming.
config PHY_SAMSUNG_USB2
tristate "S5P/Exynos SoC series USB 2.0 PHY driver"
depends on HAS_IOMEM
depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 || COMPILE_TEST
select GENERIC_PHY
select MFD_SYSCON
default ARCH_EXYNOS
help
Enable this to support the Samsung USB 2.0 PHY driver for Samsung
S5Pv210 and Exynos SoCs. This driver provides the interface for USB
2.0 PHY. Support for particular PHYs will be enabled based on the SoC
type in addition to this driver.
config PHY_EXYNOS4210_USB2
bool
depends on PHY_SAMSUNG_USB2
default CPU_EXYNOS4210
config PHY_EXYNOS4X12_USB2
bool
depends on PHY_SAMSUNG_USB2
default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
config PHY_EXYNOS5250_USB2
bool
depends on PHY_SAMSUNG_USB2
default SOC_EXYNOS5250 || SOC_EXYNOS5420
config PHY_S5PV210_USB2
bool "Support for S5PV210"
depends on PHY_SAMSUNG_USB2
depends on ARCH_S5PV210 || COMPILE_TEST
help
Enable USB PHY support for S5PV210. This option requires that Samsung
USB 2.0 PHY driver is enabled and means that support for this
particular SoC is compiled in the driver. In case of S5PV210 two phys
are available - device and host.
config PHY_EXYNOS5_USBDRD
tristate "Exynos5 SoC series USB DRD PHY driver"
depends on (ARCH_EXYNOS && OF) || COMPILE_TEST
depends on HAS_IOMEM
depends on USB_DWC3_EXYNOS
select GENERIC_PHY
select MFD_SYSCON
default y
help
Enable USB DRD PHY support for Exynos 5 SoC series.
This driver provides PHY interface for USB 3.0 DRD controller
present on Exynos5 SoC series.
config PHY_EXYNOS5250_SATA
tristate "Exynos5250 Sata SerDes/PHY driver"
depends on SOC_EXYNOS5250
depends on HAS_IOMEM
depends on OF
select GENERIC_PHY
select I2C
select I2C_S3C2410
select MFD_SYSCON
help
Enable this to support SATA SerDes/Phy found on Samsung's
Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
port to accept one SATA device.