| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Pinctrl GPIO driver for Intel Baytrail |
| * |
| * Copyright (c) 2012-2013, Intel Corporation |
| * Author: Mathias Nyman <mathias.nyman@linux.intel.com> |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/array_size.h> |
| #include <linux/bitops.h> |
| #include <linux/cleanup.h> |
| #include <linux/gpio/driver.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm.h> |
| #include <linux/property.h> |
| #include <linux/seq_file.h> |
| #include <linux/string_helpers.h> |
| |
| #include <linux/pinctrl/pinctrl.h> |
| #include <linux/pinctrl/pinmux.h> |
| #include <linux/pinctrl/pinconf.h> |
| #include <linux/pinctrl/pinconf-generic.h> |
| |
| #include "pinctrl-intel.h" |
| |
| /* memory mapped register offsets */ |
| #define BYT_CONF0_REG 0x000 |
| #define BYT_CONF1_REG 0x004 |
| #define BYT_VAL_REG 0x008 |
| #define BYT_DFT_REG 0x00c |
| #define BYT_INT_STAT_REG 0x800 |
| #define BYT_DIRECT_IRQ_REG 0x980 |
| #define BYT_DEBOUNCE_REG 0x9d0 |
| |
| /* BYT_CONF0_REG register bits */ |
| #define BYT_IODEN BIT(31) |
| #define BYT_DIRECT_IRQ_EN BIT(27) |
| #define BYT_TRIG_MASK GENMASK(26, 24) |
| #define BYT_TRIG_NEG BIT(26) |
| #define BYT_TRIG_POS BIT(25) |
| #define BYT_TRIG_LVL BIT(24) |
| #define BYT_DEBOUNCE_EN BIT(20) |
| #define BYT_GLITCH_FILTER_EN BIT(19) |
| #define BYT_GLITCH_F_SLOW_CLK BIT(17) |
| #define BYT_GLITCH_F_FAST_CLK BIT(16) |
| #define BYT_PULL_STR_SHIFT 9 |
| #define BYT_PULL_STR_MASK GENMASK(10, 9) |
| #define BYT_PULL_STR_2K (0 << BYT_PULL_STR_SHIFT) |
| #define BYT_PULL_STR_10K (1 << BYT_PULL_STR_SHIFT) |
| #define BYT_PULL_STR_20K (2 << BYT_PULL_STR_SHIFT) |
| #define BYT_PULL_STR_40K (3 << BYT_PULL_STR_SHIFT) |
| #define BYT_PULL_ASSIGN_MASK GENMASK(8, 7) |
| #define BYT_PULL_ASSIGN_DOWN BIT(8) |
| #define BYT_PULL_ASSIGN_UP BIT(7) |
| #define BYT_PIN_MUX GENMASK(2, 0) |
| |
| /* BYT_VAL_REG register bits */ |
| #define BYT_DIR_MASK GENMASK(2, 1) |
| #define BYT_INPUT_EN BIT(2) /* 0: input enabled (active low)*/ |
| #define BYT_OUTPUT_EN BIT(1) /* 0: output enabled (active low)*/ |
| #define BYT_LEVEL BIT(0) |
| |
| #define BYT_CONF0_RESTORE_MASK (BYT_DIRECT_IRQ_EN | BYT_TRIG_MASK | BYT_PIN_MUX) |
| #define BYT_VAL_RESTORE_MASK (BYT_DIR_MASK | BYT_LEVEL) |
| |
| /* BYT_DEBOUNCE_REG bits */ |
| #define BYT_DEBOUNCE_PULSE_MASK GENMASK(2, 0) |
| #define BYT_DEBOUNCE_PULSE_375US 1 |
| #define BYT_DEBOUNCE_PULSE_750US 2 |
| #define BYT_DEBOUNCE_PULSE_1500US 3 |
| #define BYT_DEBOUNCE_PULSE_3MS 4 |
| #define BYT_DEBOUNCE_PULSE_6MS 5 |
| #define BYT_DEBOUNCE_PULSE_12MS 6 |
| #define BYT_DEBOUNCE_PULSE_24MS 7 |
| |
| #define BYT_NGPIO_SCORE 102 |
| #define BYT_NGPIO_NCORE 28 |
| #define BYT_NGPIO_SUS 44 |
| |
| #define BYT_SCORE_ACPI_UID "1" |
| #define BYT_NCORE_ACPI_UID "2" |
| #define BYT_SUS_ACPI_UID "3" |
| |
| /* |
| * This is the function value most pins have for GPIO muxing. If the value |
| * differs from the default one, it must be explicitly mentioned. Otherwise, the |
| * pin control implementation will set the muxing value to default GPIO if it |
| * does not find a match for the requested function. |
| */ |
| #define BYT_DEFAULT_GPIO_MUX 0 |
| #define BYT_ALTER_GPIO_MUX 1 |
| |
| struct intel_pad_context { |
| u32 conf0; |
| u32 val; |
| }; |
| |
| #define COMMUNITY(p, n, map) \ |
| { \ |
| .pin_base = (p), \ |
| .npins = (n), \ |
| .pad_map = (map),\ |
| } |
| |
| /* SCORE pins, aka GPIOC_<pin_no> or GPIO_S0_SC[<pin_no>] */ |
| static const struct pinctrl_pin_desc byt_score_pins[] = { |
| PINCTRL_PIN(0, "SATA_GP0"), |
| PINCTRL_PIN(1, "SATA_GP1"), |
| PINCTRL_PIN(2, "SATA_LED#"), |
| PINCTRL_PIN(3, "PCIE_CLKREQ0"), |
| PINCTRL_PIN(4, "PCIE_CLKREQ1"), |
| PINCTRL_PIN(5, "PCIE_CLKREQ2"), |
| PINCTRL_PIN(6, "PCIE_CLKREQ3"), |
| PINCTRL_PIN(7, "SD3_WP"), |
| PINCTRL_PIN(8, "HDA_RST"), |
| PINCTRL_PIN(9, "HDA_SYNC"), |
| PINCTRL_PIN(10, "HDA_CLK"), |
| PINCTRL_PIN(11, "HDA_SDO"), |
| PINCTRL_PIN(12, "HDA_SDI0"), |
| PINCTRL_PIN(13, "HDA_SDI1"), |
| PINCTRL_PIN(14, "GPIO_S0_SC14"), |
| PINCTRL_PIN(15, "GPIO_S0_SC15"), |
| PINCTRL_PIN(16, "MMC1_CLK"), |
| PINCTRL_PIN(17, "MMC1_D0"), |
| PINCTRL_PIN(18, "MMC1_D1"), |
| PINCTRL_PIN(19, "MMC1_D2"), |
| PINCTRL_PIN(20, "MMC1_D3"), |
| PINCTRL_PIN(21, "MMC1_D4"), |
| PINCTRL_PIN(22, "MMC1_D5"), |
| PINCTRL_PIN(23, "MMC1_D6"), |
| PINCTRL_PIN(24, "MMC1_D7"), |
| PINCTRL_PIN(25, "MMC1_CMD"), |
| PINCTRL_PIN(26, "MMC1_RST"), |
| PINCTRL_PIN(27, "SD2_CLK"), |
| PINCTRL_PIN(28, "SD2_D0"), |
| PINCTRL_PIN(29, "SD2_D1"), |
| PINCTRL_PIN(30, "SD2_D2"), |
| PINCTRL_PIN(31, "SD2_D3_CD"), |
| PINCTRL_PIN(32, "SD2_CMD"), |
| PINCTRL_PIN(33, "SD3_CLK"), |
| PINCTRL_PIN(34, "SD3_D0"), |
| PINCTRL_PIN(35, "SD3_D1"), |
| PINCTRL_PIN(36, "SD3_D2"), |
| PINCTRL_PIN(37, "SD3_D3"), |
| PINCTRL_PIN(38, "SD3_CD"), |
| PINCTRL_PIN(39, "SD3_CMD"), |
| PINCTRL_PIN(40, "SD3_1P8EN"), |
| PINCTRL_PIN(41, "SD3_PWREN#"), |
| PINCTRL_PIN(42, "ILB_LPC_AD0"), |
| PINCTRL_PIN(43, "ILB_LPC_AD1"), |
| PINCTRL_PIN(44, "ILB_LPC_AD2"), |
| PINCTRL_PIN(45, "ILB_LPC_AD3"), |
| PINCTRL_PIN(46, "ILB_LPC_FRAME"), |
| PINCTRL_PIN(47, "ILB_LPC_CLK0"), |
| PINCTRL_PIN(48, "ILB_LPC_CLK1"), |
| PINCTRL_PIN(49, "ILB_LPC_CLKRUN"), |
| PINCTRL_PIN(50, "ILB_LPC_SERIRQ"), |
| PINCTRL_PIN(51, "PCU_SMB_DATA"), |
| PINCTRL_PIN(52, "PCU_SMB_CLK"), |
| PINCTRL_PIN(53, "PCU_SMB_ALERT"), |
| PINCTRL_PIN(54, "ILB_8254_SPKR"), |
| PINCTRL_PIN(55, "GPIO_S0_SC55"), |
| PINCTRL_PIN(56, "GPIO_S0_SC56"), |
| PINCTRL_PIN(57, "GPIO_S0_SC57"), |
| PINCTRL_PIN(58, "GPIO_S0_SC58"), |
| PINCTRL_PIN(59, "GPIO_S0_SC59"), |
| PINCTRL_PIN(60, "GPIO_S0_SC60"), |
| PINCTRL_PIN(61, "GPIO_S0_SC61"), |
| PINCTRL_PIN(62, "LPE_I2S2_CLK"), |
| PINCTRL_PIN(63, "LPE_I2S2_FRM"), |
| PINCTRL_PIN(64, "LPE_I2S2_DATAIN"), |
| PINCTRL_PIN(65, "LPE_I2S2_DATAOUT"), |
| PINCTRL_PIN(66, "SIO_SPI_CS"), |
| PINCTRL_PIN(67, "SIO_SPI_MISO"), |
| PINCTRL_PIN(68, "SIO_SPI_MOSI"), |
| PINCTRL_PIN(69, "SIO_SPI_CLK"), |
| PINCTRL_PIN(70, "SIO_UART1_RXD"), |
| PINCTRL_PIN(71, "SIO_UART1_TXD"), |
| PINCTRL_PIN(72, "SIO_UART1_RTS"), |
| PINCTRL_PIN(73, "SIO_UART1_CTS"), |
| PINCTRL_PIN(74, "SIO_UART2_RXD"), |
| PINCTRL_PIN(75, "SIO_UART2_TXD"), |
| PINCTRL_PIN(76, "SIO_UART2_RTS"), |
| PINCTRL_PIN(77, "SIO_UART2_CTS"), |
| PINCTRL_PIN(78, "SIO_I2C0_DATA"), |
| PINCTRL_PIN(79, "SIO_I2C0_CLK"), |
| PINCTRL_PIN(80, "SIO_I2C1_DATA"), |
| PINCTRL_PIN(81, "SIO_I2C1_CLK"), |
| PINCTRL_PIN(82, "SIO_I2C2_DATA"), |
| PINCTRL_PIN(83, "SIO_I2C2_CLK"), |
| PINCTRL_PIN(84, "SIO_I2C3_DATA"), |
| PINCTRL_PIN(85, "SIO_I2C3_CLK"), |
| PINCTRL_PIN(86, "SIO_I2C4_DATA"), |
| PINCTRL_PIN(87, "SIO_I2C4_CLK"), |
| PINCTRL_PIN(88, "SIO_I2C5_DATA"), |
| PINCTRL_PIN(89, "SIO_I2C5_CLK"), |
| PINCTRL_PIN(90, "SIO_I2C6_DATA"), |
| PINCTRL_PIN(91, "SIO_I2C6_CLK"), |
| PINCTRL_PIN(92, "GPIO_S0_SC92"), |
| PINCTRL_PIN(93, "GPIO_S0_SC93"), |
| PINCTRL_PIN(94, "SIO_PWM0"), |
| PINCTRL_PIN(95, "SIO_PWM1"), |
| PINCTRL_PIN(96, "PMC_PLT_CLK0"), |
| PINCTRL_PIN(97, "PMC_PLT_CLK1"), |
| PINCTRL_PIN(98, "PMC_PLT_CLK2"), |
| PINCTRL_PIN(99, "PMC_PLT_CLK3"), |
| PINCTRL_PIN(100, "PMC_PLT_CLK4"), |
| PINCTRL_PIN(101, "PMC_PLT_CLK5"), |
| }; |
| |
| static const unsigned int byt_score_pins_map[BYT_NGPIO_SCORE] = { |
| 85, 89, 93, 96, 99, 102, 98, 101, 34, 37, |
| 36, 38, 39, 35, 40, 84, 62, 61, 64, 59, |
| 54, 56, 60, 55, 63, 57, 51, 50, 53, 47, |
| 52, 49, 48, 43, 46, 41, 45, 42, 58, 44, |
| 95, 105, 70, 68, 67, 66, 69, 71, 65, 72, |
| 86, 90, 88, 92, 103, 77, 79, 83, 78, 81, |
| 80, 82, 13, 12, 15, 14, 17, 18, 19, 16, |
| 2, 1, 0, 4, 6, 7, 9, 8, 33, 32, |
| 31, 30, 29, 27, 25, 28, 26, 23, 21, 20, |
| 24, 22, 5, 3, 10, 11, 106, 87, 91, 104, |
| 97, 100, |
| }; |
| |
| /* SCORE groups */ |
| static const unsigned int byt_score_uart1_pins[] = { 70, 71, 72, 73 }; |
| static const unsigned int byt_score_uart2_pins[] = { 74, 75, 76, 77 }; |
| |
| static const unsigned int byt_score_pwm0_pins[] = { 94 }; |
| static const unsigned int byt_score_pwm1_pins[] = { 95 }; |
| |
| static const unsigned int byt_score_sio_spi_pins[] = { 66, 67, 68, 69 }; |
| |
| static const unsigned int byt_score_i2c5_pins[] = { 88, 89 }; |
| static const unsigned int byt_score_i2c6_pins[] = { 90, 91 }; |
| static const unsigned int byt_score_i2c4_pins[] = { 86, 87 }; |
| static const unsigned int byt_score_i2c3_pins[] = { 84, 85 }; |
| static const unsigned int byt_score_i2c2_pins[] = { 82, 83 }; |
| static const unsigned int byt_score_i2c1_pins[] = { 80, 81 }; |
| static const unsigned int byt_score_i2c0_pins[] = { 78, 79 }; |
| |
| static const unsigned int byt_score_ssp0_pins[] = { 8, 9, 10, 11 }; |
| static const unsigned int byt_score_ssp1_pins[] = { 12, 13, 14, 15 }; |
| static const unsigned int byt_score_ssp2_pins[] = { 62, 63, 64, 65 }; |
| |
| static const unsigned int byt_score_sdcard_pins[] = { |
| 7, 33, 34, 35, 36, 37, 38, 39, 40, 41, |
| }; |
| static const unsigned int byt_score_sdcard_mux_values[] = { |
| 2, 1, 1, 1, 1, 1, 1, 1, 1, 1, |
| }; |
| |
| static const unsigned int byt_score_sdio_pins[] = { 27, 28, 29, 30, 31, 32 }; |
| |
| static const unsigned int byt_score_emmc_pins[] = { |
| 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, |
| }; |
| |
| static const unsigned int byt_score_ilb_lpc_pins[] = { |
| 42, 43, 44, 45, 46, 47, 48, 49, 50, |
| }; |
| |
| static const unsigned int byt_score_sata_pins[] = { 0, 1, 2 }; |
| |
| static const unsigned int byt_score_plt_clk0_pins[] = { 96 }; |
| static const unsigned int byt_score_plt_clk1_pins[] = { 97 }; |
| static const unsigned int byt_score_plt_clk2_pins[] = { 98 }; |
| static const unsigned int byt_score_plt_clk3_pins[] = { 99 }; |
| static const unsigned int byt_score_plt_clk4_pins[] = { 100 }; |
| static const unsigned int byt_score_plt_clk5_pins[] = { 101 }; |
| |
| static const unsigned int byt_score_smbus_pins[] = { 51, 52, 53 }; |
| |
| static const struct intel_pingroup byt_score_groups[] = { |
| PIN_GROUP("uart1_grp", byt_score_uart1_pins, 1), |
| PIN_GROUP("uart2_grp", byt_score_uart2_pins, 1), |
| PIN_GROUP("pwm0_grp", byt_score_pwm0_pins, 1), |
| PIN_GROUP("pwm1_grp", byt_score_pwm1_pins, 1), |
| PIN_GROUP("ssp2_grp", byt_score_ssp2_pins, 1), |
| PIN_GROUP("sio_spi_grp", byt_score_sio_spi_pins, 1), |
| PIN_GROUP("i2c5_grp", byt_score_i2c5_pins, 1), |
| PIN_GROUP("i2c6_grp", byt_score_i2c6_pins, 1), |
| PIN_GROUP("i2c4_grp", byt_score_i2c4_pins, 1), |
| PIN_GROUP("i2c3_grp", byt_score_i2c3_pins, 1), |
| PIN_GROUP("i2c2_grp", byt_score_i2c2_pins, 1), |
| PIN_GROUP("i2c1_grp", byt_score_i2c1_pins, 1), |
| PIN_GROUP("i2c0_grp", byt_score_i2c0_pins, 1), |
| PIN_GROUP("ssp0_grp", byt_score_ssp0_pins, 1), |
| PIN_GROUP("ssp1_grp", byt_score_ssp1_pins, 1), |
| PIN_GROUP("sdcard_grp", byt_score_sdcard_pins, byt_score_sdcard_mux_values), |
| PIN_GROUP("sdio_grp", byt_score_sdio_pins, 1), |
| PIN_GROUP("emmc_grp", byt_score_emmc_pins, 1), |
| PIN_GROUP("lpc_grp", byt_score_ilb_lpc_pins, 1), |
| PIN_GROUP("sata_grp", byt_score_sata_pins, 1), |
| PIN_GROUP("plt_clk0_grp", byt_score_plt_clk0_pins, 1), |
| PIN_GROUP("plt_clk1_grp", byt_score_plt_clk1_pins, 1), |
| PIN_GROUP("plt_clk2_grp", byt_score_plt_clk2_pins, 1), |
| PIN_GROUP("plt_clk3_grp", byt_score_plt_clk3_pins, 1), |
| PIN_GROUP("plt_clk4_grp", byt_score_plt_clk4_pins, 1), |
| PIN_GROUP("plt_clk5_grp", byt_score_plt_clk5_pins, 1), |
| PIN_GROUP("smbus_grp", byt_score_smbus_pins, 1), |
| }; |
| |
| static const char * const byt_score_uart_groups[] = { |
| "uart1_grp", "uart2_grp", |
| }; |
| static const char * const byt_score_pwm_groups[] = { |
| "pwm0_grp", "pwm1_grp", |
| }; |
| static const char * const byt_score_ssp_groups[] = { |
| "ssp0_grp", "ssp1_grp", "ssp2_grp", |
| }; |
| static const char * const byt_score_spi_groups[] = { "sio_spi_grp" }; |
| static const char * const byt_score_i2c_groups[] = { |
| "i2c0_grp", "i2c1_grp", "i2c2_grp", "i2c3_grp", "i2c4_grp", "i2c5_grp", |
| "i2c6_grp", |
| }; |
| static const char * const byt_score_sdcard_groups[] = { "sdcard_grp" }; |
| static const char * const byt_score_sdio_groups[] = { "sdio_grp" }; |
| static const char * const byt_score_emmc_groups[] = { "emmc_grp" }; |
| static const char * const byt_score_lpc_groups[] = { "lpc_grp" }; |
| static const char * const byt_score_sata_groups[] = { "sata_grp" }; |
| static const char * const byt_score_plt_clk_groups[] = { |
| "plt_clk0_grp", "plt_clk1_grp", "plt_clk2_grp", "plt_clk3_grp", |
| "plt_clk4_grp", "plt_clk5_grp", |
| }; |
| static const char * const byt_score_smbus_groups[] = { "smbus_grp" }; |
| static const char * const byt_score_gpio_groups[] = { |
| "uart1_grp", "uart2_grp", "pwm0_grp", "pwm1_grp", "ssp0_grp", |
| "ssp1_grp", "ssp2_grp", "sio_spi_grp", "i2c0_grp", "i2c1_grp", |
| "i2c2_grp", "i2c3_grp", "i2c4_grp", "i2c5_grp", "i2c6_grp", |
| "sdcard_grp", "sdio_grp", "emmc_grp", "lpc_grp", "sata_grp", |
| "plt_clk0_grp", "plt_clk1_grp", "plt_clk2_grp", "plt_clk3_grp", |
| "plt_clk4_grp", "plt_clk5_grp", "smbus_grp", |
| }; |
| |
| static const struct intel_function byt_score_functions[] = { |
| FUNCTION("uart", byt_score_uart_groups), |
| FUNCTION("pwm", byt_score_pwm_groups), |
| FUNCTION("ssp", byt_score_ssp_groups), |
| FUNCTION("spi", byt_score_spi_groups), |
| FUNCTION("i2c", byt_score_i2c_groups), |
| FUNCTION("sdcard", byt_score_sdcard_groups), |
| FUNCTION("sdio", byt_score_sdio_groups), |
| FUNCTION("emmc", byt_score_emmc_groups), |
| FUNCTION("lpc", byt_score_lpc_groups), |
| FUNCTION("sata", byt_score_sata_groups), |
| FUNCTION("plt_clk", byt_score_plt_clk_groups), |
| FUNCTION("smbus", byt_score_smbus_groups), |
| FUNCTION("gpio", byt_score_gpio_groups), |
| }; |
| |
| static const struct intel_community byt_score_communities[] = { |
| COMMUNITY(0, BYT_NGPIO_SCORE, byt_score_pins_map), |
| }; |
| |
| static const struct intel_pinctrl_soc_data byt_score_soc_data = { |
| .uid = BYT_SCORE_ACPI_UID, |
| .pins = byt_score_pins, |
| .npins = ARRAY_SIZE(byt_score_pins), |
| .groups = byt_score_groups, |
| .ngroups = ARRAY_SIZE(byt_score_groups), |
| .functions = byt_score_functions, |
| .nfunctions = ARRAY_SIZE(byt_score_functions), |
| .communities = byt_score_communities, |
| .ncommunities = ARRAY_SIZE(byt_score_communities), |
| }; |
| |
| /* SUS pins, aka GPIOS_<pin_no> or GPIO_S5[<pin_no>] */ |
| static const struct pinctrl_pin_desc byt_sus_pins[] = { |
| PINCTRL_PIN(0, "GPIO_S50"), |
| PINCTRL_PIN(1, "GPIO_S51"), |
| PINCTRL_PIN(2, "GPIO_S52"), |
| PINCTRL_PIN(3, "GPIO_S53"), |
| PINCTRL_PIN(4, "GPIO_S54"), |
| PINCTRL_PIN(5, "GPIO_S55"), |
| PINCTRL_PIN(6, "GPIO_S56"), |
| PINCTRL_PIN(7, "GPIO_S57"), |
| PINCTRL_PIN(8, "GPIO_S58"), |
| PINCTRL_PIN(9, "GPIO_S59"), |
| PINCTRL_PIN(10, "GPIO_S510"), |
| PINCTRL_PIN(11, "PMC_SUSPWRDNACK"), |
| PINCTRL_PIN(12, "PMC_SUSCLK0"), |
| PINCTRL_PIN(13, "GPIO_S513"), |
| PINCTRL_PIN(14, "USB_ULPI_RST"), |
| PINCTRL_PIN(15, "PMC_WAKE_PCIE0#"), |
| PINCTRL_PIN(16, "PMC_PWRBTN"), |
| PINCTRL_PIN(17, "GPIO_S517"), |
| PINCTRL_PIN(18, "PMC_SUS_STAT"), |
| PINCTRL_PIN(19, "USB_OC0"), |
| PINCTRL_PIN(20, "USB_OC1"), |
| PINCTRL_PIN(21, "PCU_SPI_CS1"), |
| PINCTRL_PIN(22, "GPIO_S522"), |
| PINCTRL_PIN(23, "GPIO_S523"), |
| PINCTRL_PIN(24, "GPIO_S524"), |
| PINCTRL_PIN(25, "GPIO_S525"), |
| PINCTRL_PIN(26, "GPIO_S526"), |
| PINCTRL_PIN(27, "GPIO_S527"), |
| PINCTRL_PIN(28, "GPIO_S528"), |
| PINCTRL_PIN(29, "GPIO_S529"), |
| PINCTRL_PIN(30, "GPIO_S530"), |
| PINCTRL_PIN(31, "USB_ULPI_CLK"), |
| PINCTRL_PIN(32, "USB_ULPI_DATA0"), |
| PINCTRL_PIN(33, "USB_ULPI_DATA1"), |
| PINCTRL_PIN(34, "USB_ULPI_DATA2"), |
| PINCTRL_PIN(35, "USB_ULPI_DATA3"), |
| PINCTRL_PIN(36, "USB_ULPI_DATA4"), |
| PINCTRL_PIN(37, "USB_ULPI_DATA5"), |
| PINCTRL_PIN(38, "USB_ULPI_DATA6"), |
| PINCTRL_PIN(39, "USB_ULPI_DATA7"), |
| PINCTRL_PIN(40, "USB_ULPI_DIR"), |
| PINCTRL_PIN(41, "USB_ULPI_NXT"), |
| PINCTRL_PIN(42, "USB_ULPI_STP"), |
| PINCTRL_PIN(43, "USB_ULPI_REFCLK"), |
| }; |
| |
| static const unsigned int byt_sus_pins_map[BYT_NGPIO_SUS] = { |
| 29, 33, 30, 31, 32, 34, 36, 35, 38, 37, |
| 18, 7, 11, 20, 17, 1, 8, 10, 19, 12, |
| 0, 2, 23, 39, 28, 27, 22, 21, 24, 25, |
| 26, 51, 56, 54, 49, 55, 48, 57, 50, 58, |
| 52, 53, 59, 40, |
| }; |
| |
| static const unsigned int byt_sus_usb_over_current_pins[] = { 19, 20 }; |
| static const unsigned int byt_sus_usb_over_current_mode_values[] = { 0, 0 }; |
| static const unsigned int byt_sus_usb_over_current_gpio_mode_values[] = { 1, 1 }; |
| |
| static const unsigned int byt_sus_usb_ulpi_pins[] = { |
| 14, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, |
| }; |
| static const unsigned int byt_sus_usb_ulpi_mode_values[] = { |
| 2, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, |
| }; |
| static const unsigned int byt_sus_usb_ulpi_gpio_mode_values[] = { |
| 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| }; |
| |
| static const unsigned int byt_sus_pcu_spi_pins[] = { 21 }; |
| static const unsigned int byt_sus_pcu_spi_mode_values[] = { 0 }; |
| static const unsigned int byt_sus_pcu_spi_gpio_mode_values[] = { 1 }; |
| |
| static const unsigned int byt_sus_pmu_clk1_pins[] = { 5 }; |
| static const unsigned int byt_sus_pmu_clk2_pins[] = { 6 }; |
| |
| static const struct intel_pingroup byt_sus_groups[] = { |
| PIN_GROUP("usb_oc_grp", byt_sus_usb_over_current_pins, byt_sus_usb_over_current_mode_values), |
| PIN_GROUP("usb_ulpi_grp", byt_sus_usb_ulpi_pins, byt_sus_usb_ulpi_mode_values), |
| PIN_GROUP("pcu_spi_grp", byt_sus_pcu_spi_pins, byt_sus_pcu_spi_mode_values), |
| PIN_GROUP("usb_oc_grp_gpio", byt_sus_usb_over_current_pins, byt_sus_usb_over_current_gpio_mode_values), |
| PIN_GROUP("usb_ulpi_grp_gpio", byt_sus_usb_ulpi_pins, byt_sus_usb_ulpi_gpio_mode_values), |
| PIN_GROUP("pcu_spi_grp_gpio", byt_sus_pcu_spi_pins, byt_sus_pcu_spi_gpio_mode_values), |
| PIN_GROUP("pmu_clk1_grp", byt_sus_pmu_clk1_pins, 1), |
| PIN_GROUP("pmu_clk2_grp", byt_sus_pmu_clk2_pins, 1), |
| }; |
| |
| static const char * const byt_sus_usb_groups[] = { |
| "usb_oc_grp", "usb_ulpi_grp", |
| }; |
| static const char * const byt_sus_spi_groups[] = { "pcu_spi_grp" }; |
| static const char * const byt_sus_pmu_clk_groups[] = { |
| "pmu_clk1_grp", "pmu_clk2_grp", |
| }; |
| static const char * const byt_sus_gpio_groups[] = { |
| "usb_oc_grp_gpio", "usb_ulpi_grp_gpio", "pcu_spi_grp_gpio", |
| "pmu_clk1_grp", "pmu_clk2_grp", |
| }; |
| |
| static const struct intel_function byt_sus_functions[] = { |
| FUNCTION("usb", byt_sus_usb_groups), |
| FUNCTION("spi", byt_sus_spi_groups), |
| FUNCTION("gpio", byt_sus_gpio_groups), |
| FUNCTION("pmu_clk", byt_sus_pmu_clk_groups), |
| }; |
| |
| static const struct intel_community byt_sus_communities[] = { |
| COMMUNITY(0, BYT_NGPIO_SUS, byt_sus_pins_map), |
| }; |
| |
| static const struct intel_pinctrl_soc_data byt_sus_soc_data = { |
| .uid = BYT_SUS_ACPI_UID, |
| .pins = byt_sus_pins, |
| .npins = ARRAY_SIZE(byt_sus_pins), |
| .groups = byt_sus_groups, |
| .ngroups = ARRAY_SIZE(byt_sus_groups), |
| .functions = byt_sus_functions, |
| .nfunctions = ARRAY_SIZE(byt_sus_functions), |
| .communities = byt_sus_communities, |
| .ncommunities = ARRAY_SIZE(byt_sus_communities), |
| }; |
| |
| static const struct pinctrl_pin_desc byt_ncore_pins[] = { |
| PINCTRL_PIN(0, "HV_DDI0_HPD"), |
| PINCTRL_PIN(1, "HV_DDI0_DDC_SDA"), |
| PINCTRL_PIN(2, "HV_DDI0_DDC_SCL"), |
| PINCTRL_PIN(3, "PANEL0_VDDEN"), |
| PINCTRL_PIN(4, "PANEL0_BKLTEN"), |
| PINCTRL_PIN(5, "PANEL0_BKLTCTL"), |
| PINCTRL_PIN(6, "HV_DDI1_HPD"), |
| PINCTRL_PIN(7, "HV_DDI1_DDC_SDA"), |
| PINCTRL_PIN(8, "HV_DDI1_DDC_SCL"), |
| PINCTRL_PIN(9, "PANEL1_VDDEN"), |
| PINCTRL_PIN(10, "PANEL1_BKLTEN"), |
| PINCTRL_PIN(11, "PANEL1_BKLTCTL"), |
| PINCTRL_PIN(12, "GP_INTD_DSI_TE1"), |
| PINCTRL_PIN(13, "HV_DDI2_DDC_SDA"), |
| PINCTRL_PIN(14, "HV_DDI2_DDC_SCL"), |
| PINCTRL_PIN(15, "GP_CAMERASB00"), |
| PINCTRL_PIN(16, "GP_CAMERASB01"), |
| PINCTRL_PIN(17, "GP_CAMERASB02"), |
| PINCTRL_PIN(18, "GP_CAMERASB03"), |
| PINCTRL_PIN(19, "GP_CAMERASB04"), |
| PINCTRL_PIN(20, "GP_CAMERASB05"), |
| PINCTRL_PIN(21, "GP_CAMERASB06"), |
| PINCTRL_PIN(22, "GP_CAMERASB07"), |
| PINCTRL_PIN(23, "GP_CAMERASB08"), |
| PINCTRL_PIN(24, "GP_CAMERASB09"), |
| PINCTRL_PIN(25, "GP_CAMERASB10"), |
| PINCTRL_PIN(26, "GP_CAMERASB11"), |
| PINCTRL_PIN(27, "GP_INTD_DSI_TE2"), |
| }; |
| |
| static const unsigned int byt_ncore_pins_map[BYT_NGPIO_NCORE] = { |
| 19, 18, 17, 20, 21, 22, 24, 25, 23, 16, |
| 14, 15, 12, 26, 27, 1, 4, 8, 11, 0, |
| 3, 6, 10, 13, 2, 5, 9, 7, |
| }; |
| |
| static const struct intel_community byt_ncore_communities[] = { |
| COMMUNITY(0, BYT_NGPIO_NCORE, byt_ncore_pins_map), |
| }; |
| |
| static const struct intel_pinctrl_soc_data byt_ncore_soc_data = { |
| .uid = BYT_NCORE_ACPI_UID, |
| .pins = byt_ncore_pins, |
| .npins = ARRAY_SIZE(byt_ncore_pins), |
| .communities = byt_ncore_communities, |
| .ncommunities = ARRAY_SIZE(byt_ncore_communities), |
| }; |
| |
| static const struct intel_pinctrl_soc_data *byt_soc_data[] = { |
| &byt_score_soc_data, |
| &byt_sus_soc_data, |
| &byt_ncore_soc_data, |
| NULL |
| }; |
| |
| static DEFINE_RAW_SPINLOCK(byt_lock); |
| |
| static void __iomem *byt_gpio_reg(struct intel_pinctrl *vg, unsigned int offset, |
| int reg) |
| { |
| struct intel_community *comm = intel_get_community(vg, offset); |
| u32 reg_offset; |
| |
| if (!comm) |
| return NULL; |
| |
| offset -= comm->pin_base; |
| switch (reg) { |
| case BYT_INT_STAT_REG: |
| reg_offset = (offset / 32) * 4; |
| break; |
| case BYT_DEBOUNCE_REG: |
| reg_offset = 0; |
| break; |
| default: |
| reg_offset = comm->pad_map[offset] * 16; |
| break; |
| } |
| |
| return comm->pad_regs + reg_offset + reg; |
| } |
| |
| static const struct pinctrl_ops byt_pinctrl_ops = { |
| .get_groups_count = intel_get_groups_count, |
| .get_group_name = intel_get_group_name, |
| .get_group_pins = intel_get_group_pins, |
| }; |
| |
| static void byt_set_group_simple_mux(struct intel_pinctrl *vg, |
| const struct intel_pingroup group, |
| unsigned int func) |
| { |
| int i; |
| |
| guard(raw_spinlock_irqsave)(&byt_lock); |
| |
| for (i = 0; i < group.grp.npins; i++) { |
| void __iomem *padcfg0; |
| u32 value; |
| |
| padcfg0 = byt_gpio_reg(vg, group.grp.pins[i], BYT_CONF0_REG); |
| if (!padcfg0) { |
| dev_warn(vg->dev, "Group %s, pin %i not muxed (can't retrieve CONF0)\n", |
| group.grp.name, i); |
| continue; |
| } |
| |
| value = readl(padcfg0); |
| value &= ~BYT_PIN_MUX; |
| value |= func; |
| writel(value, padcfg0); |
| } |
| } |
| |
| static void byt_set_group_mixed_mux(struct intel_pinctrl *vg, |
| const struct intel_pingroup group, |
| const unsigned int *func) |
| { |
| int i; |
| |
| guard(raw_spinlock_irqsave)(&byt_lock); |
| |
| for (i = 0; i < group.grp.npins; i++) { |
| void __iomem *padcfg0; |
| u32 value; |
| |
| padcfg0 = byt_gpio_reg(vg, group.grp.pins[i], BYT_CONF0_REG); |
| if (!padcfg0) { |
| dev_warn(vg->dev, "Group %s, pin %i not muxed (can't retrieve CONF0)\n", |
| group.grp.name, i); |
| continue; |
| } |
| |
| value = readl(padcfg0); |
| value &= ~BYT_PIN_MUX; |
| value |= func[i]; |
| writel(value, padcfg0); |
| } |
| } |
| |
| static int byt_set_mux(struct pinctrl_dev *pctldev, unsigned int func_selector, |
| unsigned int group_selector) |
| { |
| struct intel_pinctrl *vg = pinctrl_dev_get_drvdata(pctldev); |
| const struct intel_function func = vg->soc->functions[func_selector]; |
| const struct intel_pingroup group = vg->soc->groups[group_selector]; |
| |
| if (group.modes) |
| byt_set_group_mixed_mux(vg, group, group.modes); |
| else if (!strcmp(func.func.name, "gpio")) |
| byt_set_group_simple_mux(vg, group, BYT_DEFAULT_GPIO_MUX); |
| else |
| byt_set_group_simple_mux(vg, group, group.mode); |
| |
| return 0; |
| } |
| |
| static u32 byt_get_gpio_mux(struct intel_pinctrl *vg, unsigned int offset) |
| { |
| /* SCORE pin 92-93 */ |
| if (!strcmp(vg->soc->uid, BYT_SCORE_ACPI_UID) && |
| offset >= 92 && offset <= 93) |
| return BYT_ALTER_GPIO_MUX; |
| |
| /* SUS pin 11-21 */ |
| if (!strcmp(vg->soc->uid, BYT_SUS_ACPI_UID) && |
| offset >= 11 && offset <= 21) |
| return BYT_ALTER_GPIO_MUX; |
| |
| return BYT_DEFAULT_GPIO_MUX; |
| } |
| |
| static void byt_gpio_clear_triggering(struct intel_pinctrl *vg, unsigned int offset) |
| { |
| void __iomem *reg = byt_gpio_reg(vg, offset, BYT_CONF0_REG); |
| u32 value; |
| |
| guard(raw_spinlock_irqsave)(&byt_lock); |
| |
| value = readl(reg); |
| |
| /* Do not clear direct-irq enabled IRQs (from gpio_disable_free) */ |
| if (!(value & BYT_DIRECT_IRQ_EN)) |
| value &= ~(BYT_TRIG_POS | BYT_TRIG_NEG | BYT_TRIG_LVL); |
| |
| writel(value, reg); |
| } |
| |
| static int byt_gpio_request_enable(struct pinctrl_dev *pctl_dev, |
| struct pinctrl_gpio_range *range, |
| unsigned int offset) |
| { |
| struct intel_pinctrl *vg = pinctrl_dev_get_drvdata(pctl_dev); |
| void __iomem *reg = byt_gpio_reg(vg, offset, BYT_CONF0_REG); |
| u32 value, gpio_mux; |
| |
| guard(raw_spinlock_irqsave)(&byt_lock); |
| |
| /* |
| * In most cases, func pin mux 000 means GPIO function. |
| * But, some pins may have func pin mux 001 represents |
| * GPIO function. |
| * |
| * Because there are devices out there where some pins were not |
| * configured correctly we allow changing the mux value from |
| * request (but print out warning about that). |
| */ |
| value = readl(reg) & BYT_PIN_MUX; |
| gpio_mux = byt_get_gpio_mux(vg, offset); |
| if (gpio_mux == value) |
| return 0; |
| |
| value = readl(reg) & ~BYT_PIN_MUX; |
| value |= gpio_mux; |
| writel(value, reg); |
| |
| dev_warn(vg->dev, FW_BUG "Pin %i: forcibly re-configured as GPIO\n", offset); |
| |
| return 0; |
| } |
| |
| static void byt_gpio_disable_free(struct pinctrl_dev *pctl_dev, |
| struct pinctrl_gpio_range *range, |
| unsigned int offset) |
| { |
| struct intel_pinctrl *vg = pinctrl_dev_get_drvdata(pctl_dev); |
| |
| byt_gpio_clear_triggering(vg, offset); |
| } |
| |
| static void byt_gpio_direct_irq_check(struct intel_pinctrl *vg, |
| unsigned int offset) |
| { |
| void __iomem *conf_reg = byt_gpio_reg(vg, offset, BYT_CONF0_REG); |
| |
| /* |
| * Before making any direction modifications, do a check if gpio is set |
| * for direct IRQ. On Bay Trail, setting GPIO to output does not make |
| * sense, so let's at least inform the caller before they shoot |
| * themselves in the foot. |
| */ |
| if (readl(conf_reg) & BYT_DIRECT_IRQ_EN) |
| dev_info_once(vg->dev, |
| "Potential Error: Pin %i: forcibly set GPIO with DIRECT_IRQ_EN to output\n", |
| offset); |
| } |
| |
| static int byt_gpio_set_direction(struct pinctrl_dev *pctl_dev, |
| struct pinctrl_gpio_range *range, |
| unsigned int offset, |
| bool input) |
| { |
| struct intel_pinctrl *vg = pinctrl_dev_get_drvdata(pctl_dev); |
| void __iomem *val_reg = byt_gpio_reg(vg, offset, BYT_VAL_REG); |
| u32 value; |
| |
| guard(raw_spinlock_irqsave)(&byt_lock); |
| |
| value = readl(val_reg); |
| value &= ~BYT_DIR_MASK; |
| if (input) |
| value |= BYT_OUTPUT_EN; |
| else |
| byt_gpio_direct_irq_check(vg, offset); |
| |
| writel(value, val_reg); |
| |
| return 0; |
| } |
| |
| static const struct pinmux_ops byt_pinmux_ops = { |
| .get_functions_count = intel_get_functions_count, |
| .get_function_name = intel_get_function_name, |
| .get_function_groups = intel_get_function_groups, |
| .set_mux = byt_set_mux, |
| .gpio_request_enable = byt_gpio_request_enable, |
| .gpio_disable_free = byt_gpio_disable_free, |
| .gpio_set_direction = byt_gpio_set_direction, |
| }; |
| |
| static void byt_get_pull_strength(u32 reg, u16 *strength) |
| { |
| switch (reg & BYT_PULL_STR_MASK) { |
| case BYT_PULL_STR_2K: |
| *strength = 2000; |
| break; |
| case BYT_PULL_STR_10K: |
| *strength = 10000; |
| break; |
| case BYT_PULL_STR_20K: |
| *strength = 20000; |
| break; |
| case BYT_PULL_STR_40K: |
| *strength = 40000; |
| break; |
| } |
| } |
| |
| static int byt_set_pull_strength(u32 *reg, u16 strength) |
| { |
| *reg &= ~BYT_PULL_STR_MASK; |
| |
| switch (strength) { |
| case 1: /* Set default strength value in case none is given */ |
| case 2000: |
| *reg |= BYT_PULL_STR_2K; |
| break; |
| case 10000: |
| *reg |= BYT_PULL_STR_10K; |
| break; |
| case 20000: |
| *reg |= BYT_PULL_STR_20K; |
| break; |
| case 40000: |
| *reg |= BYT_PULL_STR_40K; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static void byt_gpio_force_input_mode(struct intel_pinctrl *vg, unsigned int offset) |
| { |
| void __iomem *reg = byt_gpio_reg(vg, offset, BYT_VAL_REG); |
| u32 value; |
| |
| value = readl(reg); |
| if (!(value & BYT_INPUT_EN)) |
| return; |
| |
| /* |
| * Pull assignment is only applicable in input mode. If |
| * chip is not in input mode, set it and warn about it. |
| */ |
| value &= ~BYT_INPUT_EN; |
| writel(value, reg); |
| dev_warn(vg->dev, "Pin %i: forcibly set to input mode\n", offset); |
| } |
| |
| static int byt_pin_config_get(struct pinctrl_dev *pctl_dev, unsigned int offset, |
| unsigned long *config) |
| { |
| struct intel_pinctrl *vg = pinctrl_dev_get_drvdata(pctl_dev); |
| enum pin_config_param param = pinconf_to_config_param(*config); |
| void __iomem *conf_reg = byt_gpio_reg(vg, offset, BYT_CONF0_REG); |
| void __iomem *val_reg = byt_gpio_reg(vg, offset, BYT_VAL_REG); |
| void __iomem *db_reg = byt_gpio_reg(vg, offset, BYT_DEBOUNCE_REG); |
| u32 conf, pull, val, debounce; |
| u16 arg = 0; |
| |
| scoped_guard(raw_spinlock_irqsave, &byt_lock) { |
| conf = readl(conf_reg); |
| val = readl(val_reg); |
| } |
| |
| pull = conf & BYT_PULL_ASSIGN_MASK; |
| |
| switch (param) { |
| case PIN_CONFIG_BIAS_DISABLE: |
| if (pull) |
| return -EINVAL; |
| break; |
| case PIN_CONFIG_BIAS_PULL_DOWN: |
| /* Pull assignment is only applicable in input mode */ |
| if ((val & BYT_INPUT_EN) || pull != BYT_PULL_ASSIGN_DOWN) |
| return -EINVAL; |
| |
| byt_get_pull_strength(conf, &arg); |
| |
| break; |
| case PIN_CONFIG_BIAS_PULL_UP: |
| /* Pull assignment is only applicable in input mode */ |
| if ((val & BYT_INPUT_EN) || pull != BYT_PULL_ASSIGN_UP) |
| return -EINVAL; |
| |
| byt_get_pull_strength(conf, &arg); |
| |
| break; |
| case PIN_CONFIG_INPUT_DEBOUNCE: |
| if (!(conf & BYT_DEBOUNCE_EN)) |
| return -EINVAL; |
| |
| scoped_guard(raw_spinlock_irqsave, &byt_lock) |
| debounce = readl(db_reg); |
| |
| switch (debounce & BYT_DEBOUNCE_PULSE_MASK) { |
| case BYT_DEBOUNCE_PULSE_375US: |
| arg = 375; |
| break; |
| case BYT_DEBOUNCE_PULSE_750US: |
| arg = 750; |
| break; |
| case BYT_DEBOUNCE_PULSE_1500US: |
| arg = 1500; |
| break; |
| case BYT_DEBOUNCE_PULSE_3MS: |
| arg = 3000; |
| break; |
| case BYT_DEBOUNCE_PULSE_6MS: |
| arg = 6000; |
| break; |
| case BYT_DEBOUNCE_PULSE_12MS: |
| arg = 12000; |
| break; |
| case BYT_DEBOUNCE_PULSE_24MS: |
| arg = 24000; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| break; |
| default: |
| return -ENOTSUPP; |
| } |
| |
| *config = pinconf_to_config_packed(param, arg); |
| |
| return 0; |
| } |
| |
| static int byt_pin_config_set(struct pinctrl_dev *pctl_dev, |
| unsigned int offset, |
| unsigned long *configs, |
| unsigned int num_configs) |
| { |
| struct intel_pinctrl *vg = pinctrl_dev_get_drvdata(pctl_dev); |
| void __iomem *conf_reg = byt_gpio_reg(vg, offset, BYT_CONF0_REG); |
| void __iomem *db_reg = byt_gpio_reg(vg, offset, BYT_DEBOUNCE_REG); |
| u32 conf, db_pulse, debounce; |
| enum pin_config_param param; |
| int i, ret; |
| u32 arg; |
| |
| guard(raw_spinlock_irqsave)(&byt_lock); |
| |
| conf = readl(conf_reg); |
| |
| for (i = 0; i < num_configs; i++) { |
| param = pinconf_to_config_param(configs[i]); |
| arg = pinconf_to_config_argument(configs[i]); |
| |
| switch (param) { |
| case PIN_CONFIG_BIAS_DISABLE: |
| conf &= ~BYT_PULL_ASSIGN_MASK; |
| break; |
| case PIN_CONFIG_BIAS_PULL_DOWN: |
| byt_gpio_force_input_mode(vg, offset); |
| |
| conf &= ~BYT_PULL_ASSIGN_MASK; |
| conf |= BYT_PULL_ASSIGN_DOWN; |
| ret = byt_set_pull_strength(&conf, arg); |
| if (ret) |
| return ret; |
| |
| break; |
| case PIN_CONFIG_BIAS_PULL_UP: |
| byt_gpio_force_input_mode(vg, offset); |
| |
| conf &= ~BYT_PULL_ASSIGN_MASK; |
| conf |= BYT_PULL_ASSIGN_UP; |
| ret = byt_set_pull_strength(&conf, arg); |
| if (ret) |
| return ret; |
| |
| break; |
| case PIN_CONFIG_INPUT_DEBOUNCE: |
| switch (arg) { |
| case 0: |
| db_pulse = 0; |
| break; |
| case 375: |
| db_pulse = BYT_DEBOUNCE_PULSE_375US; |
| break; |
| case 750: |
| db_pulse = BYT_DEBOUNCE_PULSE_750US; |
| break; |
| case 1500: |
| db_pulse = BYT_DEBOUNCE_PULSE_1500US; |
| break; |
| case 3000: |
| db_pulse = BYT_DEBOUNCE_PULSE_3MS; |
| break; |
| case 6000: |
| db_pulse = BYT_DEBOUNCE_PULSE_6MS; |
| break; |
| case 12000: |
| db_pulse = BYT_DEBOUNCE_PULSE_12MS; |
| break; |
| case 24000: |
| db_pulse = BYT_DEBOUNCE_PULSE_24MS; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (db_pulse) { |
| debounce = readl(db_reg); |
| debounce = (debounce & ~BYT_DEBOUNCE_PULSE_MASK) | db_pulse; |
| writel(debounce, db_reg); |
| |
| conf |= BYT_DEBOUNCE_EN; |
| } else { |
| conf &= ~BYT_DEBOUNCE_EN; |
| } |
| |
| break; |
| default: |
| return -ENOTSUPP; |
| } |
| } |
| |
| writel(conf, conf_reg); |
| |
| return 0; |
| } |
| |
| static const struct pinconf_ops byt_pinconf_ops = { |
| .is_generic = true, |
| .pin_config_get = byt_pin_config_get, |
| .pin_config_set = byt_pin_config_set, |
| }; |
| |
| static const struct pinctrl_desc byt_pinctrl_desc = { |
| .pctlops = &byt_pinctrl_ops, |
| .pmxops = &byt_pinmux_ops, |
| .confops = &byt_pinconf_ops, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int byt_gpio_get(struct gpio_chip *chip, unsigned int offset) |
| { |
| struct intel_pinctrl *vg = gpiochip_get_data(chip); |
| void __iomem *reg = byt_gpio_reg(vg, offset, BYT_VAL_REG); |
| u32 val; |
| |
| scoped_guard(raw_spinlock_irqsave, &byt_lock) |
| val = readl(reg); |
| |
| return !!(val & BYT_LEVEL); |
| } |
| |
| static void byt_gpio_set(struct gpio_chip *chip, unsigned int offset, int value) |
| { |
| struct intel_pinctrl *vg = gpiochip_get_data(chip); |
| void __iomem *reg; |
| u32 old_val; |
| |
| reg = byt_gpio_reg(vg, offset, BYT_VAL_REG); |
| if (!reg) |
| return; |
| |
| guard(raw_spinlock_irqsave)(&byt_lock); |
| |
| old_val = readl(reg); |
| if (value) |
| writel(old_val | BYT_LEVEL, reg); |
| else |
| writel(old_val & ~BYT_LEVEL, reg); |
| } |
| |
| static int byt_gpio_get_direction(struct gpio_chip *chip, unsigned int offset) |
| { |
| struct intel_pinctrl *vg = gpiochip_get_data(chip); |
| void __iomem *reg; |
| u32 value; |
| |
| reg = byt_gpio_reg(vg, offset, BYT_VAL_REG); |
| if (!reg) |
| return -EINVAL; |
| |
| scoped_guard(raw_spinlock_irqsave, &byt_lock) |
| value = readl(reg); |
| |
| if (!(value & BYT_OUTPUT_EN)) |
| return GPIO_LINE_DIRECTION_OUT; |
| if (!(value & BYT_INPUT_EN)) |
| return GPIO_LINE_DIRECTION_IN; |
| |
| return -EINVAL; |
| } |
| |
| static int byt_gpio_direction_input(struct gpio_chip *chip, unsigned int offset) |
| { |
| struct intel_pinctrl *vg = gpiochip_get_data(chip); |
| void __iomem *val_reg = byt_gpio_reg(vg, offset, BYT_VAL_REG); |
| u32 reg; |
| |
| guard(raw_spinlock_irqsave)(&byt_lock); |
| |
| reg = readl(val_reg); |
| reg &= ~BYT_DIR_MASK; |
| reg |= BYT_OUTPUT_EN; |
| writel(reg, val_reg); |
| |
| return 0; |
| } |
| |
| /* |
| * Note despite the temptation this MUST NOT be converted into a call to |
| * pinctrl_gpio_direction_output() + byt_gpio_set() that does not work this |
| * MUST be done as a single BYT_VAL_REG register write. |
| * See the commit message of the commit adding this comment for details. |
| */ |
| static int byt_gpio_direction_output(struct gpio_chip *chip, |
| unsigned int offset, int value) |
| { |
| struct intel_pinctrl *vg = gpiochip_get_data(chip); |
| void __iomem *val_reg = byt_gpio_reg(vg, offset, BYT_VAL_REG); |
| u32 reg; |
| |
| guard(raw_spinlock_irqsave)(&byt_lock); |
| |
| byt_gpio_direct_irq_check(vg, offset); |
| |
| reg = readl(val_reg); |
| reg &= ~BYT_DIR_MASK; |
| if (value) |
| reg |= BYT_LEVEL; |
| else |
| reg &= ~BYT_LEVEL; |
| |
| writel(reg, val_reg); |
| |
| return 0; |
| } |
| |
| static void byt_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) |
| { |
| struct intel_pinctrl *vg = gpiochip_get_data(chip); |
| int i; |
| u32 conf0, val; |
| |
| for (i = 0; i < vg->soc->npins; i++) { |
| const struct intel_community *comm; |
| void __iomem *conf_reg, *val_reg; |
| const char *pull_str = NULL; |
| const char *pull = NULL; |
| unsigned int pin; |
| |
| pin = vg->soc->pins[i].number; |
| |
| conf_reg = byt_gpio_reg(vg, pin, BYT_CONF0_REG); |
| if (!conf_reg) { |
| seq_printf(s, "Pin %i: can't retrieve CONF0\n", pin); |
| continue; |
| } |
| |
| val_reg = byt_gpio_reg(vg, pin, BYT_VAL_REG); |
| if (!val_reg) { |
| seq_printf(s, "Pin %i: can't retrieve VAL\n", pin); |
| continue; |
| } |
| |
| scoped_guard(raw_spinlock_irqsave, &byt_lock) { |
| conf0 = readl(conf_reg); |
| val = readl(val_reg); |
| } |
| |
| comm = intel_get_community(vg, pin); |
| if (!comm) { |
| seq_printf(s, "Pin %i: can't retrieve community\n", pin); |
| continue; |
| } |
| |
| char *label __free(kfree) = gpiochip_dup_line_label(chip, i); |
| if (IS_ERR(label)) |
| continue; |
| |
| switch (conf0 & BYT_PULL_ASSIGN_MASK) { |
| case BYT_PULL_ASSIGN_UP: |
| pull = "up"; |
| break; |
| case BYT_PULL_ASSIGN_DOWN: |
| pull = "down"; |
| break; |
| } |
| |
| switch (conf0 & BYT_PULL_STR_MASK) { |
| case BYT_PULL_STR_2K: |
| pull_str = "2k"; |
| break; |
| case BYT_PULL_STR_10K: |
| pull_str = "10k"; |
| break; |
| case BYT_PULL_STR_20K: |
| pull_str = "20k"; |
| break; |
| case BYT_PULL_STR_40K: |
| pull_str = "40k"; |
| break; |
| } |
| |
| seq_printf(s, |
| " gpio-%-3d (%-20.20s) %s %s %s pad-%-3d offset:0x%03x mux:%d %s%s%s", |
| pin, |
| label ?: "Unrequested", |
| val & BYT_INPUT_EN ? " " : "in", |
| val & BYT_OUTPUT_EN ? " " : "out", |
| str_hi_lo(val & BYT_LEVEL), |
| comm->pad_map[i], comm->pad_map[i] * 16, |
| conf0 & 0x7, |
| conf0 & BYT_TRIG_NEG ? " fall" : " ", |
| conf0 & BYT_TRIG_POS ? " rise" : " ", |
| conf0 & BYT_TRIG_LVL ? " level" : " "); |
| |
| if (pull && pull_str) |
| seq_printf(s, " %-4s %-3s", pull, pull_str); |
| else |
| seq_puts(s, " "); |
| |
| if (conf0 & BYT_IODEN) |
| seq_puts(s, " open-drain"); |
| |
| seq_puts(s, "\n"); |
| } |
| } |
| |
| static const struct gpio_chip byt_gpio_chip = { |
| .owner = THIS_MODULE, |
| .request = gpiochip_generic_request, |
| .free = gpiochip_generic_free, |
| .get_direction = byt_gpio_get_direction, |
| .direction_input = byt_gpio_direction_input, |
| .direction_output = byt_gpio_direction_output, |
| .get = byt_gpio_get, |
| .set = byt_gpio_set, |
| .set_config = gpiochip_generic_config, |
| .dbg_show = byt_gpio_dbg_show, |
| }; |
| |
| static void byt_irq_ack(struct irq_data *d) |
| { |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); |
| struct intel_pinctrl *vg = gpiochip_get_data(gc); |
| irq_hw_number_t hwirq = irqd_to_hwirq(d); |
| void __iomem *reg; |
| |
| reg = byt_gpio_reg(vg, hwirq, BYT_INT_STAT_REG); |
| if (!reg) |
| return; |
| |
| guard(raw_spinlock)(&byt_lock); |
| |
| writel(BIT(hwirq % 32), reg); |
| } |
| |
| static void byt_irq_mask(struct irq_data *d) |
| { |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); |
| struct intel_pinctrl *vg = gpiochip_get_data(gc); |
| irq_hw_number_t hwirq = irqd_to_hwirq(d); |
| |
| byt_gpio_clear_triggering(vg, hwirq); |
| gpiochip_disable_irq(gc, hwirq); |
| } |
| |
| static void byt_irq_unmask(struct irq_data *d) |
| { |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); |
| struct intel_pinctrl *vg = gpiochip_get_data(gc); |
| irq_hw_number_t hwirq = irqd_to_hwirq(d); |
| void __iomem *reg; |
| u32 value; |
| |
| gpiochip_enable_irq(gc, hwirq); |
| |
| reg = byt_gpio_reg(vg, hwirq, BYT_CONF0_REG); |
| if (!reg) |
| return; |
| |
| guard(raw_spinlock_irqsave)(&byt_lock); |
| |
| value = readl(reg); |
| |
| switch (irqd_get_trigger_type(d)) { |
| case IRQ_TYPE_LEVEL_HIGH: |
| value |= BYT_TRIG_LVL; |
| fallthrough; |
| case IRQ_TYPE_EDGE_RISING: |
| value |= BYT_TRIG_POS; |
| break; |
| case IRQ_TYPE_LEVEL_LOW: |
| value |= BYT_TRIG_LVL; |
| fallthrough; |
| case IRQ_TYPE_EDGE_FALLING: |
| value |= BYT_TRIG_NEG; |
| break; |
| case IRQ_TYPE_EDGE_BOTH: |
| value |= (BYT_TRIG_NEG | BYT_TRIG_POS); |
| break; |
| } |
| |
| writel(value, reg); |
| } |
| |
| static int byt_irq_type(struct irq_data *d, unsigned int type) |
| { |
| struct intel_pinctrl *vg = gpiochip_get_data(irq_data_get_irq_chip_data(d)); |
| irq_hw_number_t hwirq = irqd_to_hwirq(d); |
| void __iomem *reg; |
| u32 value; |
| |
| reg = byt_gpio_reg(vg, hwirq, BYT_CONF0_REG); |
| if (!reg) |
| return -EINVAL; |
| |
| guard(raw_spinlock_irqsave)(&byt_lock); |
| |
| value = readl(reg); |
| |
| WARN(value & BYT_DIRECT_IRQ_EN, |
| "Bad pad config for IO mode, force DIRECT_IRQ_EN bit clearing"); |
| |
| /* For level trigges the BYT_TRIG_POS and BYT_TRIG_NEG bits |
| * are used to indicate high and low level triggering |
| */ |
| value &= ~(BYT_DIRECT_IRQ_EN | BYT_TRIG_POS | BYT_TRIG_NEG | |
| BYT_TRIG_LVL); |
| /* Enable glitch filtering */ |
| value |= BYT_GLITCH_FILTER_EN | BYT_GLITCH_F_SLOW_CLK | |
| BYT_GLITCH_F_FAST_CLK; |
| |
| writel(value, reg); |
| |
| if (type & IRQ_TYPE_EDGE_BOTH) |
| irq_set_handler_locked(d, handle_edge_irq); |
| else if (type & IRQ_TYPE_LEVEL_MASK) |
| irq_set_handler_locked(d, handle_level_irq); |
| |
| return 0; |
| } |
| |
| static const struct irq_chip byt_gpio_irq_chip = { |
| .name = "BYT-GPIO", |
| .irq_ack = byt_irq_ack, |
| .irq_mask = byt_irq_mask, |
| .irq_unmask = byt_irq_unmask, |
| .irq_set_type = byt_irq_type, |
| .flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_SET_TYPE_MASKED | IRQCHIP_IMMUTABLE, |
| GPIOCHIP_IRQ_RESOURCE_HELPERS, |
| }; |
| |
| static void byt_gpio_irq_handler(struct irq_desc *desc) |
| { |
| struct irq_data *data = irq_desc_get_irq_data(desc); |
| struct intel_pinctrl *vg = gpiochip_get_data(irq_desc_get_handler_data(desc)); |
| struct irq_chip *chip = irq_data_get_irq_chip(data); |
| u32 base, pin; |
| void __iomem *reg; |
| unsigned long pending; |
| |
| /* check from GPIO controller which pin triggered the interrupt */ |
| for (base = 0; base < vg->chip.ngpio; base += 32) { |
| reg = byt_gpio_reg(vg, base, BYT_INT_STAT_REG); |
| |
| if (!reg) { |
| dev_warn(vg->dev, "Pin %i: can't retrieve INT_STAT%u\n", base / 32, base); |
| continue; |
| } |
| |
| scoped_guard(raw_spinlock, &byt_lock) |
| pending = readl(reg); |
| for_each_set_bit(pin, &pending, 32) |
| generic_handle_domain_irq(vg->chip.irq.domain, base + pin); |
| } |
| chip->irq_eoi(data); |
| } |
| |
| static bool byt_direct_irq_sanity_check(struct intel_pinctrl *vg, int pin, u32 conf0) |
| { |
| int direct_irq, ioapic_direct_irq_base; |
| u8 *match, direct_irq_mux[16]; |
| u32 trig; |
| |
| memcpy_fromio(direct_irq_mux, vg->communities->pad_regs + BYT_DIRECT_IRQ_REG, |
| sizeof(direct_irq_mux)); |
| match = memchr(direct_irq_mux, pin, sizeof(direct_irq_mux)); |
| if (!match) { |
| dev_warn(vg->dev, FW_BUG "Pin %i: DIRECT_IRQ_EN set but no IRQ assigned, clearing\n", pin); |
| return false; |
| } |
| |
| direct_irq = match - direct_irq_mux; |
| /* Base IO-APIC pin numbers come from atom-e3800-family-datasheet.pdf */ |
| ioapic_direct_irq_base = (vg->communities->npins == BYT_NGPIO_SCORE) ? 51 : 67; |
| dev_dbg(vg->dev, "Pin %i: uses direct IRQ %d (IO-APIC %d)\n", pin, |
| direct_irq, direct_irq + ioapic_direct_irq_base); |
| |
| /* |
| * Testing has shown that the way direct IRQs work is that the combination of the |
| * direct-irq-en flag and the direct IRQ mux connect the output of the GPIO's IRQ |
| * trigger block, which normally sets the status flag in the IRQ status reg at |
| * 0x800, to one of the IO-APIC pins according to the mux registers. |
| * |
| * This means that: |
| * 1. The TRIG_MASK bits must be set to configure the GPIO's IRQ trigger block |
| * 2. The TRIG_LVL bit *must* be set, so that the GPIO's input value is directly |
| * passed (1:1 or inverted) to the IO-APIC pin, if TRIG_LVL is not set, |
| * selecting edge mode operation then on the first edge the IO-APIC pin goes |
| * high, but since no write-to-clear write will be done to the IRQ status reg |
| * at 0x800, the detected edge condition will never get cleared. |
| */ |
| trig = conf0 & BYT_TRIG_MASK; |
| if (trig != (BYT_TRIG_POS | BYT_TRIG_LVL) && |
| trig != (BYT_TRIG_NEG | BYT_TRIG_LVL)) { |
| dev_warn(vg->dev, |
| FW_BUG "Pin %i: DIRECT_IRQ_EN set without trigger (CONF0: %#08x), clearing\n", |
| pin, conf0); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static void byt_init_irq_valid_mask(struct gpio_chip *chip, |
| unsigned long *valid_mask, |
| unsigned int ngpios) |
| { |
| struct intel_pinctrl *vg = gpiochip_get_data(chip); |
| void __iomem *reg; |
| u32 value; |
| int i; |
| |
| /* |
| * Clear interrupt triggers for all pins that are GPIOs and |
| * do not use direct IRQ mode. This will prevent spurious |
| * interrupts from misconfigured pins. |
| */ |
| for (i = 0; i < vg->soc->npins; i++) { |
| unsigned int pin = vg->soc->pins[i].number; |
| |
| reg = byt_gpio_reg(vg, pin, BYT_CONF0_REG); |
| if (!reg) { |
| dev_warn(vg->dev, "Pin %i: could not retrieve CONF0\n", i); |
| continue; |
| } |
| |
| value = readl(reg); |
| if (value & BYT_DIRECT_IRQ_EN) { |
| if (byt_direct_irq_sanity_check(vg, i, value)) { |
| clear_bit(i, valid_mask); |
| } else { |
| value &= ~(BYT_DIRECT_IRQ_EN | BYT_TRIG_POS | |
| BYT_TRIG_NEG | BYT_TRIG_LVL); |
| writel(value, reg); |
| } |
| } else if ((value & BYT_PIN_MUX) == byt_get_gpio_mux(vg, i)) { |
| byt_gpio_clear_triggering(vg, i); |
| dev_dbg(vg->dev, "disabling GPIO %d\n", i); |
| } |
| } |
| } |
| |
| static int byt_gpio_irq_init_hw(struct gpio_chip *chip) |
| { |
| struct intel_pinctrl *vg = gpiochip_get_data(chip); |
| void __iomem *reg; |
| u32 base, value; |
| |
| /* clear interrupt status trigger registers */ |
| for (base = 0; base < vg->soc->npins; base += 32) { |
| reg = byt_gpio_reg(vg, base, BYT_INT_STAT_REG); |
| |
| if (!reg) { |
| dev_warn(vg->dev, "Pin %i: can't retrieve INT_STAT%u\n", base / 32, base); |
| continue; |
| } |
| |
| writel(0xffffffff, reg); |
| /* make sure trigger bits are cleared, if not then a pin |
| might be misconfigured in bios */ |
| value = readl(reg); |
| if (value) |
| dev_err(vg->dev, |
| "GPIO interrupt error, pins misconfigured. INT_STAT%u: %#08x\n", |
| base / 32, value); |
| } |
| |
| return 0; |
| } |
| |
| static int byt_gpio_add_pin_ranges(struct gpio_chip *chip) |
| { |
| struct intel_pinctrl *vg = gpiochip_get_data(chip); |
| struct device *dev = vg->dev; |
| int ret; |
| |
| ret = gpiochip_add_pin_range(chip, dev_name(dev), 0, 0, vg->soc->npins); |
| if (ret) |
| dev_err(dev, "failed to add GPIO pin range\n"); |
| |
| return ret; |
| } |
| |
| static int byt_gpio_probe(struct intel_pinctrl *vg) |
| { |
| struct platform_device *pdev = to_platform_device(vg->dev); |
| struct gpio_chip *gc; |
| int irq, ret; |
| |
| /* Set up gpio chip */ |
| vg->chip = byt_gpio_chip; |
| gc = &vg->chip; |
| gc->label = dev_name(vg->dev); |
| gc->base = -1; |
| gc->can_sleep = false; |
| gc->add_pin_ranges = byt_gpio_add_pin_ranges; |
| gc->parent = vg->dev; |
| gc->ngpio = vg->soc->npins; |
| |
| #ifdef CONFIG_PM_SLEEP |
| vg->context.pads = devm_kcalloc(vg->dev, gc->ngpio, sizeof(*vg->context.pads), |
| GFP_KERNEL); |
| if (!vg->context.pads) |
| return -ENOMEM; |
| #endif |
| |
| /* set up interrupts */ |
| irq = platform_get_irq_optional(pdev, 0); |
| if (irq > 0) { |
| struct gpio_irq_chip *girq; |
| |
| girq = &gc->irq; |
| gpio_irq_chip_set_chip(girq, &byt_gpio_irq_chip); |
| girq->init_hw = byt_gpio_irq_init_hw; |
| girq->init_valid_mask = byt_init_irq_valid_mask; |
| girq->parent_handler = byt_gpio_irq_handler; |
| girq->num_parents = 1; |
| girq->parents = devm_kcalloc(vg->dev, girq->num_parents, |
| sizeof(*girq->parents), GFP_KERNEL); |
| if (!girq->parents) |
| return -ENOMEM; |
| girq->parents[0] = irq; |
| girq->default_type = IRQ_TYPE_NONE; |
| girq->handler = handle_bad_irq; |
| } |
| |
| ret = devm_gpiochip_add_data(vg->dev, gc, vg); |
| if (ret) { |
| dev_err(vg->dev, "failed adding byt-gpio chip\n"); |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| static int byt_set_soc_data(struct intel_pinctrl *vg, |
| const struct intel_pinctrl_soc_data *soc) |
| { |
| struct platform_device *pdev = to_platform_device(vg->dev); |
| int i; |
| |
| vg->soc = soc; |
| |
| vg->ncommunities = vg->soc->ncommunities; |
| vg->communities = devm_kcalloc(vg->dev, vg->ncommunities, |
| sizeof(*vg->communities), GFP_KERNEL); |
| if (!vg->communities) |
| return -ENOMEM; |
| |
| for (i = 0; i < vg->soc->ncommunities; i++) { |
| struct intel_community *comm = vg->communities + i; |
| |
| *comm = vg->soc->communities[i]; |
| |
| comm->pad_regs = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(comm->pad_regs)) |
| return PTR_ERR(comm->pad_regs); |
| } |
| |
| return 0; |
| } |
| |
| static const struct acpi_device_id byt_gpio_acpi_match[] = { |
| { "INT33B2", (kernel_ulong_t)byt_soc_data }, |
| { "INT33FC", (kernel_ulong_t)byt_soc_data }, |
| { } |
| }; |
| |
| static int byt_pinctrl_probe(struct platform_device *pdev) |
| { |
| const struct intel_pinctrl_soc_data *soc_data; |
| struct device *dev = &pdev->dev; |
| struct intel_pinctrl *vg; |
| int ret; |
| |
| soc_data = intel_pinctrl_get_soc_data(pdev); |
| if (IS_ERR(soc_data)) |
| return PTR_ERR(soc_data); |
| |
| vg = devm_kzalloc(dev, sizeof(*vg), GFP_KERNEL); |
| if (!vg) |
| return -ENOMEM; |
| |
| vg->dev = dev; |
| ret = byt_set_soc_data(vg, soc_data); |
| if (ret) { |
| dev_err(dev, "failed to set soc data\n"); |
| return ret; |
| } |
| |
| vg->pctldesc = byt_pinctrl_desc; |
| vg->pctldesc.name = dev_name(dev); |
| vg->pctldesc.pins = vg->soc->pins; |
| vg->pctldesc.npins = vg->soc->npins; |
| |
| vg->pctldev = devm_pinctrl_register(dev, &vg->pctldesc, vg); |
| if (IS_ERR(vg->pctldev)) { |
| dev_err(dev, "failed to register pinctrl driver\n"); |
| return PTR_ERR(vg->pctldev); |
| } |
| |
| ret = byt_gpio_probe(vg); |
| if (ret) |
| return ret; |
| |
| platform_set_drvdata(pdev, vg); |
| |
| return 0; |
| } |
| |
| static int byt_gpio_suspend(struct device *dev) |
| { |
| struct intel_pinctrl *vg = dev_get_drvdata(dev); |
| int i; |
| |
| guard(raw_spinlock_irqsave)(&byt_lock); |
| |
| for (i = 0; i < vg->soc->npins; i++) { |
| void __iomem *reg; |
| u32 value; |
| unsigned int pin = vg->soc->pins[i].number; |
| |
| reg = byt_gpio_reg(vg, pin, BYT_CONF0_REG); |
| if (!reg) { |
| dev_warn(vg->dev, "Pin %i: can't retrieve CONF0\n", i); |
| continue; |
| } |
| value = readl(reg) & BYT_CONF0_RESTORE_MASK; |
| vg->context.pads[i].conf0 = value; |
| |
| reg = byt_gpio_reg(vg, pin, BYT_VAL_REG); |
| if (!reg) { |
| dev_warn(vg->dev, "Pin %i: can't retrieve VAL\n", i); |
| continue; |
| } |
| value = readl(reg) & BYT_VAL_RESTORE_MASK; |
| vg->context.pads[i].val = value; |
| } |
| |
| return 0; |
| } |
| |
| static int byt_gpio_resume(struct device *dev) |
| { |
| struct intel_pinctrl *vg = dev_get_drvdata(dev); |
| int i; |
| |
| guard(raw_spinlock_irqsave)(&byt_lock); |
| |
| for (i = 0; i < vg->soc->npins; i++) { |
| void __iomem *reg; |
| u32 value; |
| unsigned int pin = vg->soc->pins[i].number; |
| |
| reg = byt_gpio_reg(vg, pin, BYT_CONF0_REG); |
| if (!reg) { |
| dev_warn(vg->dev, "Pin %i: can't retrieve CONF0\n", i); |
| continue; |
| } |
| value = readl(reg); |
| if ((value & BYT_CONF0_RESTORE_MASK) != |
| vg->context.pads[i].conf0) { |
| value &= ~BYT_CONF0_RESTORE_MASK; |
| value |= vg->context.pads[i].conf0; |
| writel(value, reg); |
| dev_info(dev, "restored pin %d CONF0 %#08x", i, value); |
| } |
| |
| reg = byt_gpio_reg(vg, pin, BYT_VAL_REG); |
| if (!reg) { |
| dev_warn(vg->dev, "Pin %i: can't retrieve VAL\n", i); |
| continue; |
| } |
| value = readl(reg); |
| if ((value & BYT_VAL_RESTORE_MASK) != |
| vg->context.pads[i].val) { |
| u32 v; |
| |
| v = value & ~BYT_VAL_RESTORE_MASK; |
| v |= vg->context.pads[i].val; |
| if (v != value) { |
| writel(v, reg); |
| dev_dbg(dev, "restored pin %d VAL %#08x\n", i, v); |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops byt_gpio_pm_ops = { |
| LATE_SYSTEM_SLEEP_PM_OPS(byt_gpio_suspend, byt_gpio_resume) |
| }; |
| |
| static struct platform_driver byt_gpio_driver = { |
| .probe = byt_pinctrl_probe, |
| .driver = { |
| .name = "byt_gpio", |
| .pm = pm_sleep_ptr(&byt_gpio_pm_ops), |
| .acpi_match_table = byt_gpio_acpi_match, |
| .suppress_bind_attrs = true, |
| }, |
| }; |
| |
| static int __init byt_gpio_init(void) |
| { |
| return platform_driver_register(&byt_gpio_driver); |
| } |
| subsys_initcall(byt_gpio_init); |
| |
| MODULE_IMPORT_NS(PINCTRL_INTEL); |