| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * w1_ds2413.c - w1 family 3a (DS2413) driver |
| * based on w1_ds2408.c by Jean-Francois Dagenais <dagenaisj@sonatest.com> |
| * |
| * Copyright (c) 2013 Mariusz Bialonczyk <manio@skyboo.net> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/device.h> |
| #include <linux/types.h> |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| |
| #include <linux/w1.h> |
| |
| #define W1_FAMILY_DS2413 0x3A |
| |
| #define W1_F3A_RETRIES 3 |
| #define W1_F3A_FUNC_PIO_ACCESS_READ 0xF5 |
| #define W1_F3A_FUNC_PIO_ACCESS_WRITE 0x5A |
| #define W1_F3A_SUCCESS_CONFIRM_BYTE 0xAA |
| #define W1_F3A_INVALID_PIO_STATE 0xFF |
| |
| static ssize_t state_read(struct file *filp, struct kobject *kobj, |
| struct bin_attribute *bin_attr, char *buf, loff_t off, |
| size_t count) |
| { |
| struct w1_slave *sl = kobj_to_w1_slave(kobj); |
| unsigned int retries = W1_F3A_RETRIES; |
| ssize_t bytes_read = -EIO; |
| u8 state; |
| |
| dev_dbg(&sl->dev, |
| "Reading %s kobj: %p, off: %0#10x, count: %zu, buff addr: %p", |
| bin_attr->attr.name, kobj, (unsigned int)off, count, buf); |
| |
| if (off != 0) |
| return 0; |
| if (!buf) |
| return -EINVAL; |
| |
| mutex_lock(&sl->master->bus_mutex); |
| dev_dbg(&sl->dev, "mutex locked"); |
| |
| next: |
| if (w1_reset_select_slave(sl)) |
| goto out; |
| |
| while (retries--) { |
| w1_write_8(sl->master, W1_F3A_FUNC_PIO_ACCESS_READ); |
| |
| state = w1_read_8(sl->master); |
| if ((state & 0x0F) == ((~state >> 4) & 0x0F)) { |
| /* complement is correct */ |
| *buf = state; |
| bytes_read = 1; |
| goto out; |
| } else if (state == W1_F3A_INVALID_PIO_STATE) { |
| /* slave didn't respond, try to select it again */ |
| dev_warn(&sl->dev, "slave device did not respond to PIO_ACCESS_READ, " \ |
| "reselecting, retries left: %d\n", retries); |
| goto next; |
| } |
| |
| if (w1_reset_resume_command(sl->master)) |
| goto out; /* unrecoverable error */ |
| |
| dev_warn(&sl->dev, "PIO_ACCESS_READ error, retries left: %d\n", retries); |
| } |
| |
| out: |
| mutex_unlock(&sl->master->bus_mutex); |
| dev_dbg(&sl->dev, "%s, mutex unlocked, retries: %d\n", |
| (bytes_read > 0) ? "succeeded" : "error", retries); |
| return bytes_read; |
| } |
| |
| static BIN_ATTR_RO(state, 1); |
| |
| static ssize_t output_write(struct file *filp, struct kobject *kobj, |
| struct bin_attribute *bin_attr, char *buf, |
| loff_t off, size_t count) |
| { |
| struct w1_slave *sl = kobj_to_w1_slave(kobj); |
| u8 w1_buf[3]; |
| unsigned int retries = W1_F3A_RETRIES; |
| ssize_t bytes_written = -EIO; |
| |
| if (count != 1 || off != 0) |
| return -EFAULT; |
| |
| dev_dbg(&sl->dev, "locking mutex for write_output"); |
| mutex_lock(&sl->master->bus_mutex); |
| dev_dbg(&sl->dev, "mutex locked"); |
| |
| if (w1_reset_select_slave(sl)) |
| goto out; |
| |
| /* |
| * according to the DS2413 datasheet the most significant 6 bits |
| * should be set to "1"s, so do it now |
| */ |
| *buf = *buf | 0xFC; |
| |
| while (retries--) { |
| w1_buf[0] = W1_F3A_FUNC_PIO_ACCESS_WRITE; |
| w1_buf[1] = *buf; |
| w1_buf[2] = ~(*buf); |
| w1_write_block(sl->master, w1_buf, 3); |
| |
| if (w1_read_8(sl->master) == W1_F3A_SUCCESS_CONFIRM_BYTE) { |
| bytes_written = 1; |
| goto out; |
| } |
| if (w1_reset_resume_command(sl->master)) |
| goto out; /* unrecoverable error */ |
| |
| dev_warn(&sl->dev, "PIO_ACCESS_WRITE error, retries left: %d\n", retries); |
| } |
| |
| out: |
| mutex_unlock(&sl->master->bus_mutex); |
| dev_dbg(&sl->dev, "%s, mutex unlocked, retries: %d\n", |
| (bytes_written > 0) ? "succeeded" : "error", retries); |
| return bytes_written; |
| } |
| |
| static BIN_ATTR(output, 0664, NULL, output_write, 1); |
| |
| static struct bin_attribute *w1_f3a_bin_attrs[] = { |
| &bin_attr_state, |
| &bin_attr_output, |
| NULL, |
| }; |
| |
| static const struct attribute_group w1_f3a_group = { |
| .bin_attrs = w1_f3a_bin_attrs, |
| }; |
| |
| static const struct attribute_group *w1_f3a_groups[] = { |
| &w1_f3a_group, |
| NULL, |
| }; |
| |
| static const struct w1_family_ops w1_f3a_fops = { |
| .groups = w1_f3a_groups, |
| }; |
| |
| static struct w1_family w1_family_3a = { |
| .fid = W1_FAMILY_DS2413, |
| .fops = &w1_f3a_fops, |
| }; |
| module_w1_family(w1_family_3a); |
| |
| MODULE_AUTHOR("Mariusz Bialonczyk <manio@skyboo.net>"); |
| MODULE_DESCRIPTION("w1 family 3a driver for DS2413 2 Pin IO"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS2413)); |