| /* |
| * tm6000-dvb.c - dvb-t support for TM5600/TM6000/TM6010 USB video capture devices |
| * |
| * Copyright (C) 2007 Michel Ludwig <michel.ludwig@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation version 2 |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/usb.h> |
| |
| #include "tm6000.h" |
| #include "tm6000-regs.h" |
| |
| #include "zl10353.h" |
| |
| #include <media/tuner.h> |
| |
| #include "tuner-xc2028.h" |
| #include "xc5000.h" |
| |
| MODULE_DESCRIPTION("DVB driver extension module for tm5600/6000/6010 based TV cards"); |
| MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); |
| MODULE_LICENSE("GPL"); |
| |
| MODULE_SUPPORTED_DEVICE("{{Trident, tm5600}," |
| "{{Trident, tm6000}," |
| "{{Trident, tm6010}"); |
| |
| static int debug; |
| |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "enable debug message"); |
| |
| static inline void print_err_status(struct tm6000_core *dev, |
| int packet, int status) |
| { |
| char *errmsg = "Unknown"; |
| |
| switch (status) { |
| case -ENOENT: |
| errmsg = "unlinked synchronuously"; |
| break; |
| case -ECONNRESET: |
| errmsg = "unlinked asynchronuously"; |
| break; |
| case -ENOSR: |
| errmsg = "Buffer error (overrun)"; |
| break; |
| case -EPIPE: |
| errmsg = "Stalled (device not responding)"; |
| break; |
| case -EOVERFLOW: |
| errmsg = "Babble (bad cable?)"; |
| break; |
| case -EPROTO: |
| errmsg = "Bit-stuff error (bad cable?)"; |
| break; |
| case -EILSEQ: |
| errmsg = "CRC/Timeout (could be anything)"; |
| break; |
| case -ETIME: |
| errmsg = "Device does not respond"; |
| break; |
| } |
| if (packet < 0) { |
| dprintk(dev, 1, "URB status %d [%s].\n", |
| status, errmsg); |
| } else { |
| dprintk(dev, 1, "URB packet %d, status %d [%s].\n", |
| packet, status, errmsg); |
| } |
| } |
| |
| static void tm6000_urb_received(struct urb *urb) |
| { |
| int ret; |
| struct tm6000_core *dev = urb->context; |
| |
| if (urb->status != 0) |
| print_err_status(dev, 0, urb->status); |
| else if (urb->actual_length > 0) |
| dvb_dmx_swfilter(&dev->dvb->demux, urb->transfer_buffer, |
| urb->actual_length); |
| |
| if (dev->dvb->streams > 0) { |
| ret = usb_submit_urb(urb, GFP_ATOMIC); |
| if (ret < 0) { |
| printk(KERN_ERR "tm6000: error %s\n", __FUNCTION__); |
| kfree(urb->transfer_buffer); |
| usb_free_urb(urb); |
| } |
| } |
| } |
| |
| int tm6000_start_stream(struct tm6000_core *dev) |
| { |
| int ret; |
| unsigned int pipe, size; |
| struct tm6000_dvb *dvb = dev->dvb; |
| |
| printk(KERN_INFO "tm6000: got start stream request %s\n", __FUNCTION__); |
| |
| if (dev->mode != TM6000_MODE_DIGITAL) { |
| tm6000_init_digital_mode(dev); |
| dev->mode = TM6000_MODE_DIGITAL; |
| } |
| |
| dvb->bulk_urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (dvb->bulk_urb == NULL) { |
| printk(KERN_ERR "tm6000: couldn't allocate urb\n"); |
| return -ENOMEM; |
| } |
| |
| pipe = usb_rcvbulkpipe(dev->udev, dev->bulk_in.endp->desc.bEndpointAddress |
| & USB_ENDPOINT_NUMBER_MASK); |
| |
| size = usb_maxpacket(dev->udev, pipe, usb_pipeout(pipe)); |
| size = size * 15; /* 512 x 8 or 12 or 15 */ |
| |
| dvb->bulk_urb->transfer_buffer = kzalloc(size, GFP_KERNEL); |
| if (dvb->bulk_urb->transfer_buffer == NULL) { |
| usb_free_urb(dvb->bulk_urb); |
| printk(KERN_ERR "tm6000: couldn't allocate transfer buffer!\n"); |
| return -ENOMEM; |
| } |
| |
| usb_fill_bulk_urb(dvb->bulk_urb, dev->udev, pipe, |
| dvb->bulk_urb->transfer_buffer, |
| size, |
| tm6000_urb_received, dev); |
| |
| ret = usb_clear_halt(dev->udev, pipe); |
| if (ret < 0) { |
| printk(KERN_ERR "tm6000: error %i in %s during pipe reset\n", |
| ret, __FUNCTION__); |
| return ret; |
| } else |
| printk(KERN_ERR "tm6000: pipe resetted\n"); |
| |
| /* mutex_lock(&tm6000_driver.open_close_mutex); */ |
| ret = usb_submit_urb(dvb->bulk_urb, GFP_KERNEL); |
| |
| /* mutex_unlock(&tm6000_driver.open_close_mutex); */ |
| if (ret) { |
| printk(KERN_ERR "tm6000: submit of urb failed (error=%i)\n", |
| ret); |
| |
| kfree(dvb->bulk_urb->transfer_buffer); |
| usb_free_urb(dvb->bulk_urb); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| void tm6000_stop_stream(struct tm6000_core *dev) |
| { |
| struct tm6000_dvb *dvb = dev->dvb; |
| |
| if (dvb->bulk_urb) { |
| printk(KERN_INFO "urb killing\n"); |
| usb_kill_urb(dvb->bulk_urb); |
| printk(KERN_INFO "urb buffer free\n"); |
| kfree(dvb->bulk_urb->transfer_buffer); |
| usb_free_urb(dvb->bulk_urb); |
| dvb->bulk_urb = NULL; |
| } |
| } |
| |
| int tm6000_start_feed(struct dvb_demux_feed *feed) |
| { |
| struct dvb_demux *demux = feed->demux; |
| struct tm6000_core *dev = demux->priv; |
| struct tm6000_dvb *dvb = dev->dvb; |
| printk(KERN_INFO "tm6000: got start feed request %s\n", __FUNCTION__); |
| |
| mutex_lock(&dvb->mutex); |
| if (dvb->streams == 0) { |
| dvb->streams = 1; |
| /* mutex_init(&tm6000_dev->streming_mutex); */ |
| tm6000_start_stream(dev); |
| } else |
| ++(dvb->streams); |
| mutex_unlock(&dvb->mutex); |
| |
| return 0; |
| } |
| |
| int tm6000_stop_feed(struct dvb_demux_feed *feed) |
| { |
| struct dvb_demux *demux = feed->demux; |
| struct tm6000_core *dev = demux->priv; |
| struct tm6000_dvb *dvb = dev->dvb; |
| |
| printk(KERN_INFO "tm6000: got stop feed request %s\n", __FUNCTION__); |
| |
| mutex_lock(&dvb->mutex); |
| |
| printk(KERN_INFO "stream %#x\n", dvb->streams); |
| --(dvb->streams); |
| if (dvb->streams == 0) { |
| printk(KERN_INFO "stop stream\n"); |
| tm6000_stop_stream(dev); |
| /* mutex_destroy(&tm6000_dev->streaming_mutex); */ |
| } |
| mutex_unlock(&dvb->mutex); |
| /* mutex_destroy(&tm6000_dev->streaming_mutex); */ |
| |
| return 0; |
| } |
| |
| int tm6000_dvb_attach_frontend(struct tm6000_core *dev) |
| { |
| struct tm6000_dvb *dvb = dev->dvb; |
| |
| if (dev->caps.has_zl10353) { |
| struct zl10353_config config = { |
| .demod_address = dev->demod_addr, |
| .no_tuner = 1, |
| .parallel_ts = 1, |
| .if2 = 45700, |
| .disable_i2c_gate_ctrl = 1, |
| }; |
| |
| dvb->frontend = dvb_attach(zl10353_attach, &config, |
| &dev->i2c_adap); |
| } else { |
| printk(KERN_ERR "tm6000: no frontend defined for the device!\n"); |
| return -1; |
| } |
| |
| return (!dvb->frontend) ? -1 : 0; |
| } |
| |
| DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); |
| |
| int register_dvb(struct tm6000_core *dev) |
| { |
| int ret = -1; |
| struct tm6000_dvb *dvb = dev->dvb; |
| |
| mutex_init(&dvb->mutex); |
| |
| dvb->streams = 0; |
| |
| /* attach the frontend */ |
| ret = tm6000_dvb_attach_frontend(dev); |
| if (ret < 0) { |
| printk(KERN_ERR "tm6000: couldn't attach the frontend!\n"); |
| goto err; |
| } |
| |
| ret = dvb_register_adapter(&dvb->adapter, "Trident TVMaster 6000 DVB-T", |
| THIS_MODULE, &dev->udev->dev, adapter_nr); |
| dvb->adapter.priv = dev; |
| |
| if (dvb->frontend) { |
| switch (dev->tuner_type) { |
| case TUNER_XC2028: { |
| struct xc2028_config cfg = { |
| .i2c_adap = &dev->i2c_adap, |
| .i2c_addr = dev->tuner_addr, |
| }; |
| |
| dvb->frontend->callback = tm6000_tuner_callback; |
| ret = dvb_register_frontend(&dvb->adapter, dvb->frontend); |
| if (ret < 0) { |
| printk(KERN_ERR |
| "tm6000: couldn't register frontend\n"); |
| goto adapter_err; |
| } |
| |
| if (!dvb_attach(xc2028_attach, dvb->frontend, &cfg)) { |
| printk(KERN_ERR "tm6000: couldn't register " |
| "frontend (xc3028)\n"); |
| ret = -EINVAL; |
| goto frontend_err; |
| } |
| printk(KERN_INFO "tm6000: XC2028/3028 asked to be " |
| "attached to frontend!\n"); |
| break; |
| } |
| case TUNER_XC5000: { |
| struct xc5000_config cfg = { |
| .i2c_address = dev->tuner_addr, |
| }; |
| |
| dvb->frontend->callback = tm6000_xc5000_callback; |
| ret = dvb_register_frontend(&dvb->adapter, dvb->frontend); |
| if (ret < 0) { |
| printk(KERN_ERR |
| "tm6000: couldn't register frontend\n"); |
| goto adapter_err; |
| } |
| |
| if (!dvb_attach(xc5000_attach, dvb->frontend, &dev->i2c_adap, &cfg)) { |
| printk(KERN_ERR "tm6000: couldn't register " |
| "frontend (xc5000)\n"); |
| ret = -EINVAL; |
| goto frontend_err; |
| } |
| printk(KERN_INFO "tm6000: XC5000 asked to be " |
| "attached to frontend!\n"); |
| break; |
| } |
| } |
| } else |
| printk(KERN_ERR "tm6000: no frontend found\n"); |
| |
| dvb->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING |
| | DMX_MEMORY_BASED_FILTERING; |
| dvb->demux.priv = dev; |
| dvb->demux.filternum = 8; |
| dvb->demux.feednum = 8; |
| dvb->demux.start_feed = tm6000_start_feed; |
| dvb->demux.stop_feed = tm6000_stop_feed; |
| dvb->demux.write_to_decoder = NULL; |
| ret = dvb_dmx_init(&dvb->demux); |
| if (ret < 0) { |
| printk("tm6000: dvb_dmx_init failed (errno = %d)\n", ret); |
| goto frontend_err; |
| } |
| |
| dvb->dmxdev.filternum = dev->dvb->demux.filternum; |
| dvb->dmxdev.demux = &dev->dvb->demux.dmx; |
| dvb->dmxdev.capabilities = 0; |
| |
| ret = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter); |
| if (ret < 0) { |
| printk("tm6000: dvb_dmxdev_init failed (errno = %d)\n", ret); |
| goto dvb_dmx_err; |
| } |
| |
| return 0; |
| |
| dvb_dmx_err: |
| dvb_dmx_release(&dvb->demux); |
| frontend_err: |
| if (dvb->frontend) { |
| dvb_frontend_detach(dvb->frontend); |
| dvb_unregister_frontend(dvb->frontend); |
| } |
| adapter_err: |
| dvb_unregister_adapter(&dvb->adapter); |
| err: |
| return ret; |
| } |
| |
| void unregister_dvb(struct tm6000_core *dev) |
| { |
| struct tm6000_dvb *dvb = dev->dvb; |
| |
| if (dvb->bulk_urb != NULL) { |
| struct urb *bulk_urb = dvb->bulk_urb; |
| |
| kfree(bulk_urb->transfer_buffer); |
| bulk_urb->transfer_buffer = NULL; |
| usb_unlink_urb(bulk_urb); |
| usb_free_urb(bulk_urb); |
| } |
| |
| /* mutex_lock(&tm6000_driver.open_close_mutex); */ |
| if (dvb->frontend) { |
| dvb_frontend_detach(dvb->frontend); |
| dvb_unregister_frontend(dvb->frontend); |
| } |
| |
| dvb_dmxdev_release(&dvb->dmxdev); |
| dvb_dmx_release(&dvb->demux); |
| dvb_unregister_adapter(&dvb->adapter); |
| mutex_destroy(&dvb->mutex); |
| /* mutex_unlock(&tm6000_driver.open_close_mutex); */ |
| } |
| |
| static int dvb_init(struct tm6000_core *dev) |
| { |
| struct tm6000_dvb *dvb; |
| int rc; |
| |
| if (!dev) |
| return 0; |
| |
| if (!dev->caps.has_dvb) |
| return 0; |
| |
| dvb = kzalloc(sizeof(struct tm6000_dvb), GFP_KERNEL); |
| if (!dvb) { |
| printk(KERN_INFO "Cannot allocate memory\n"); |
| return -ENOMEM; |
| } |
| |
| dev->dvb = dvb; |
| |
| rc = register_dvb(dev); |
| if (rc < 0) { |
| kfree(dvb); |
| dev->dvb = NULL; |
| return 0; |
| } |
| |
| return 0; |
| } |
| |
| static int dvb_fini(struct tm6000_core *dev) |
| { |
| if (!dev) |
| return 0; |
| |
| if (!dev->caps.has_dvb) |
| return 0; |
| |
| if (dev->dvb) { |
| unregister_dvb(dev); |
| kfree(dev->dvb); |
| dev->dvb = NULL; |
| } |
| |
| return 0; |
| } |
| |
| static struct tm6000_ops dvb_ops = { |
| .type = TM6000_DVB, |
| .name = "TM6000 dvb Extension", |
| .init = dvb_init, |
| .fini = dvb_fini, |
| }; |
| |
| static int __init tm6000_dvb_register(void) |
| { |
| return tm6000_register_extension(&dvb_ops); |
| } |
| |
| static void __exit tm6000_dvb_unregister(void) |
| { |
| tm6000_unregister_extension(&dvb_ops); |
| } |
| |
| module_init(tm6000_dvb_register); |
| module_exit(tm6000_dvb_unregister); |