drivers/leds/leds-is31fl32xx.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0-only
 /*
  * Driver for ISSI IS31FL32xx family of I2C LED controllers
  *
  * Copyright 2015 Allworx Corp.
  *
  * Datasheets:
  *   http://www.issi.com/US/product-analog-fxled-driver.shtml
  *   http://www.si-en.com/product.asp?parentid=890
  */

 #include <linux/device.h>
 #include <linux/i2c.h>
 #include <linux/kernel.h>
 #include <linux/leds.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>

 /* Used to indicate a device has no such register */
 #define IS31FL32XX_REG_NONE 0xFF

 /* Software Shutdown bit in Shutdown Register */
 #define IS31FL32XX_SHUTDOWN_SSD_ENABLE  0
 #define IS31FL32XX_SHUTDOWN_SSD_DISABLE BIT(0)

 /* IS31FL3216 has a number of unique registers */
 #define IS31FL3216_CONFIG_REG 0x00
 #define IS31FL3216_LIGHTING_EFFECT_REG 0x03
 #define IS31FL3216_CHANNEL_CONFIG_REG 0x04

 /* Software Shutdown bit in 3216 Config Register */
 #define IS31FL3216_CONFIG_SSD_ENABLE  BIT(7)
 #define IS31FL3216_CONFIG_SSD_DISABLE 0

 struct is31fl32xx_priv;
 struct is31fl32xx_led_data {
 	struct led_classdev cdev;
 	u8 channel; /* 1-based, max priv->cdef->channels */
 	struct is31fl32xx_priv *priv;
 };

 struct is31fl32xx_priv {
 	const struct is31fl32xx_chipdef *cdef;
 	struct i2c_client *client;
 	unsigned int num_leds;
 	struct is31fl32xx_led_data leds[];
 };

 /**
  * struct is31fl32xx_chipdef - chip-specific attributes
  * @channels            : Number of LED channels
  * @shutdown_reg        : address of Shutdown register (optional)
  * @pwm_update_reg      : address of PWM Update register
  * @global_control_reg  : address of Global Control register (optional)
  * @reset_reg           : address of Reset register (optional)
  * @pwm_register_base   : address of first PWM register
  * @pwm_registers_reversed: : true if PWM registers count down instead of up
  * @led_control_register_base : address of first LED control register (optional)
  * @enable_bits_per_led_control_register: number of LEDs enable bits in each
  * @reset_func:         : pointer to reset function
  *
  * For all optional register addresses, the sentinel value %IS31FL32XX_REG_NONE
  * indicates that this chip has no such register.
  *
  * If non-NULL, @reset_func will be called during probing to set all
  * necessary registers to a known initialization state. This is needed
  * for chips that do not have a @reset_reg.
  *
  * @enable_bits_per_led_control_register must be >=1 if
  * @led_control_register_base != %IS31FL32XX_REG_NONE.
  */
 struct is31fl32xx_chipdef {
 	u8	channels;
 	u8	shutdown_reg;
 	u8	pwm_update_reg;
 	u8	global_control_reg;
 	u8	reset_reg;
 	u8	pwm_register_base;
 	bool	pwm_registers_reversed;
 	u8	led_control_register_base;
 	u8	enable_bits_per_led_control_register;
 	int (*reset_func)(struct is31fl32xx_priv *priv);
 	int (*sw_shutdown_func)(struct is31fl32xx_priv *priv, bool enable);
 };

 static const struct is31fl32xx_chipdef is31fl3236_cdef = {
 	.channels				= 36,
 	.shutdown_reg				= 0x00,
 	.pwm_update_reg				= 0x25,
 	.global_control_reg			= 0x4a,
 	.reset_reg				= 0x4f,
 	.pwm_register_base			= 0x01,
 	.led_control_register_base		= 0x26,
 	.enable_bits_per_led_control_register	= 1,
 };

 static const struct is31fl32xx_chipdef is31fl3235_cdef = {
 	.channels				= 28,
 	.shutdown_reg				= 0x00,
 	.pwm_update_reg				= 0x25,
 	.global_control_reg			= 0x4a,
 	.reset_reg				= 0x4f,
 	.pwm_register_base			= 0x05,
 	.led_control_register_base		= 0x2a,
 	.enable_bits_per_led_control_register	= 1,
 };

 static const struct is31fl32xx_chipdef is31fl3218_cdef = {
 	.channels				= 18,
 	.shutdown_reg				= 0x00,
 	.pwm_update_reg				= 0x16,
 	.global_control_reg			= IS31FL32XX_REG_NONE,
 	.reset_reg				= 0x17,
 	.pwm_register_base			= 0x01,
 	.led_control_register_base		= 0x13,
 	.enable_bits_per_led_control_register	= 6,
 };

 static int is31fl3216_reset(struct is31fl32xx_priv *priv);
 static int is31fl3216_software_shutdown(struct is31fl32xx_priv *priv,
 					bool enable);
 static const struct is31fl32xx_chipdef is31fl3216_cdef = {
 	.channels				= 16,
 	.shutdown_reg				= IS31FL32XX_REG_NONE,
 	.pwm_update_reg				= 0xB0,
 	.global_control_reg			= IS31FL32XX_REG_NONE,
 	.reset_reg				= IS31FL32XX_REG_NONE,
 	.pwm_register_base			= 0x10,
 	.pwm_registers_reversed			= true,
 	.led_control_register_base		= 0x01,
 	.enable_bits_per_led_control_register	= 8,
 	.reset_func				= is31fl3216_reset,
 	.sw_shutdown_func			= is31fl3216_software_shutdown,
 };

 static int is31fl32xx_write(struct is31fl32xx_priv *priv, u8 reg, u8 val)
 {
 	int ret;

 	dev_dbg(&priv->client->dev, "writing register 0x%02X=0x%02X", reg, val);

 	ret =  i2c_smbus_write_byte_data(priv->client, reg, val);
 	if (ret) {
 		dev_err(&priv->client->dev,
 			"register write to 0x%02X failed (error %d)",
 			reg, ret);
 	}
 	return ret;
 }

 /*
  * Custom reset function for IS31FL3216 because it does not have a RESET
  * register the way that the other IS31FL32xx chips do. We don't bother
  * writing the GPIO and animation registers, because the registers we
  * do write ensure those will have no effect.
  */
 static int is31fl3216_reset(struct is31fl32xx_priv *priv)
 {
 	unsigned int i;
 	int ret;

 	ret = is31fl32xx_write(priv, IS31FL3216_CONFIG_REG,
 			       IS31FL3216_CONFIG_SSD_ENABLE);
 	if (ret)
 		return ret;
 	for (i = 0; i < priv->cdef->channels; i++) {
 		ret = is31fl32xx_write(priv, priv->cdef->pwm_register_base+i,
 				       0x00);
 		if (ret)
 			return ret;
 	}
 	ret = is31fl32xx_write(priv, priv->cdef->pwm_update_reg, 0);
 	if (ret)
 		return ret;
 	ret = is31fl32xx_write(priv, IS31FL3216_LIGHTING_EFFECT_REG, 0x00);
 	if (ret)
 		return ret;
 	ret = is31fl32xx_write(priv, IS31FL3216_CHANNEL_CONFIG_REG, 0x00);
 	if (ret)
 		return ret;

 	return 0;
 }

 /*
  * Custom Software-Shutdown function for IS31FL3216 because it does not have
  * a SHUTDOWN register the way that the other IS31FL32xx chips do.
  * We don't bother doing a read/modify/write on the CONFIG register because
  * we only ever use a value of '0' for the other fields in that register.
  */
 static int is31fl3216_software_shutdown(struct is31fl32xx_priv *priv,
 					bool enable)
 {
 	u8 value = enable ? IS31FL3216_CONFIG_SSD_ENABLE :
 			    IS31FL3216_CONFIG_SSD_DISABLE;

 	return is31fl32xx_write(priv, IS31FL3216_CONFIG_REG, value);
 }

 /*
  * NOTE: A mutex is not needed in this function because:
  * - All referenced data is read-only after probe()
  * - The I2C core has a mutex on to protect the bus
  * - There are no read/modify/write operations
  * - Intervening operations between the write of the PWM register
  *   and the Update register are harmless.
  *
  * Example:
  *	PWM_REG_1 write 16
  *	UPDATE_REG write 0
  *	PWM_REG_2 write 128
  *	UPDATE_REG write 0
  *   vs:
  *	PWM_REG_1 write 16
  *	PWM_REG_2 write 128
  *	UPDATE_REG write 0
  *	UPDATE_REG write 0
  * are equivalent. Poking the Update register merely applies all PWM
  * register writes up to that point.
  */
 static int is31fl32xx_brightness_set(struct led_classdev *led_cdev,
 				     enum led_brightness brightness)
 {
 	const struct is31fl32xx_led_data *led_data =
 		container_of(led_cdev, struct is31fl32xx_led_data, cdev);
 	const struct is31fl32xx_chipdef *cdef = led_data->priv->cdef;
 	u8 pwm_register_offset;
 	int ret;

 	dev_dbg(led_cdev->dev, "%s: %d\n", __func__, brightness);

 	/* NOTE: led_data->channel is 1-based */
 	if (cdef->pwm_registers_reversed)
 		pwm_register_offset = cdef->channels - led_data->channel;
 	else
 		pwm_register_offset = led_data->channel - 1;

 	ret = is31fl32xx_write(led_data->priv,
 			       cdef->pwm_register_base + pwm_register_offset,
 			       brightness);
 	if (ret)
 		return ret;

 	return is31fl32xx_write(led_data->priv, cdef->pwm_update_reg, 0);
 }

 static int is31fl32xx_reset_regs(struct is31fl32xx_priv *priv)
 {
 	const struct is31fl32xx_chipdef *cdef = priv->cdef;
 	int ret;

 	if (cdef->reset_reg != IS31FL32XX_REG_NONE) {
 		ret = is31fl32xx_write(priv, cdef->reset_reg, 0);
 		if (ret)
 			return ret;
 	}

 	if (cdef->reset_func)
 		return cdef->reset_func(priv);

 	return 0;
 }

 static int is31fl32xx_software_shutdown(struct is31fl32xx_priv *priv,
 					bool enable)
 {
 	const struct is31fl32xx_chipdef *cdef = priv->cdef;
 	int ret;

 	if (cdef->shutdown_reg != IS31FL32XX_REG_NONE) {
 		u8 value = enable ? IS31FL32XX_SHUTDOWN_SSD_ENABLE :
 				    IS31FL32XX_SHUTDOWN_SSD_DISABLE;
 		ret = is31fl32xx_write(priv, cdef->shutdown_reg, value);
 		if (ret)
 			return ret;
 	}

 	if (cdef->sw_shutdown_func)
 		return cdef->sw_shutdown_func(priv, enable);

 	return 0;
 }

 static int is31fl32xx_init_regs(struct is31fl32xx_priv *priv)
 {
 	const struct is31fl32xx_chipdef *cdef = priv->cdef;
 	int ret;

 	ret = is31fl32xx_reset_regs(priv);
 	if (ret)
 		return ret;

 	/*
 	 * Set enable bit for all channels.
 	 * We will control state with PWM registers alone.
 	 */
 	if (cdef->led_control_register_base != IS31FL32XX_REG_NONE) {
 		u8 value =
 		    GENMASK(cdef->enable_bits_per_led_control_register-1, 0);
 		u8 num_regs = cdef->channels /
 				cdef->enable_bits_per_led_control_register;
 		int i;

 		for (i = 0; i < num_regs; i++) {
 			ret = is31fl32xx_write(priv,
 					       cdef->led_control_register_base+i,
 					       value);
 			if (ret)
 				return ret;
 		}
 	}

 	ret = is31fl32xx_software_shutdown(priv, false);
 	if (ret)
 		return ret;

 	if (cdef->global_control_reg != IS31FL32XX_REG_NONE) {
 		ret = is31fl32xx_write(priv, cdef->global_control_reg, 0x00);
 		if (ret)
 			return ret;
 	}

 	return 0;
 }

 static int is31fl32xx_parse_child_dt(const struct device *dev,
 				     const struct device_node *child,
 				     struct is31fl32xx_led_data *led_data)
 {
 	struct led_classdev *cdev = &led_data->cdev;
 	int ret = 0;
 	u32 reg;

 	ret = of_property_read_u32(child, "reg", &reg);
 	if (ret || reg < 1 || reg > led_data->priv->cdef->channels) {
 		dev_err(dev,
 			"Child node %pOF does not have a valid reg property\n",
 			child);
 		return -EINVAL;
 	}
 	led_data->channel = reg;

 	of_property_read_string(child, "linux,default-trigger",
 				&cdev->default_trigger);

 	cdev->brightness_set_blocking = is31fl32xx_brightness_set;

 	return 0;
 }

 static struct is31fl32xx_led_data *is31fl32xx_find_led_data(
 					struct is31fl32xx_priv *priv,
 					u8 channel)
 {
 	size_t i;

 	for (i = 0; i < priv->num_leds; i++) {
 		if (priv->leds[i].channel == channel)
 			return &priv->leds[i];
 	}

 	return NULL;
 }

 static int is31fl32xx_parse_dt(struct device *dev,
 			       struct is31fl32xx_priv *priv)
 {
 	struct device_node *child;
 	int ret = 0;

 	for_each_available_child_of_node(dev_of_node(dev), child) {
 		struct led_init_data init_data = {};
 		struct is31fl32xx_led_data *led_data =
 			&priv->leds[priv->num_leds];
 		const struct is31fl32xx_led_data *other_led_data;

 		led_data->priv = priv;

 		ret = is31fl32xx_parse_child_dt(dev, child, led_data);
 		if (ret)
 			goto err;

 		/* Detect if channel is already in use by another child */
 		other_led_data = is31fl32xx_find_led_data(priv,
 							  led_data->channel);
 		if (other_led_data) {
 			dev_err(dev,
 				"Node %pOF 'reg' conflicts with another LED\n",
 				child);
 			goto err;
 		}

 		init_data.fwnode = of_fwnode_handle(child);

 		ret = devm_led_classdev_register_ext(dev, &led_data->cdev,
 						     &init_data);
 		if (ret) {
 			dev_err(dev, "Failed to register LED for %pOF: %d\n",
 				child, ret);
 			goto err;
 		}

 		priv->num_leds++;
 	}

 	return 0;

 err:
 	of_node_put(child);
 	return ret;
 }

 static const struct of_device_id of_is31fl32xx_match[] = {
 	{ .compatible = "issi,is31fl3236", .data = &is31fl3236_cdef, },
 	{ .compatible = "issi,is31fl3235", .data = &is31fl3235_cdef, },
 	{ .compatible = "issi,is31fl3218", .data = &is31fl3218_cdef, },
 	{ .compatible = "si-en,sn3218",    .data = &is31fl3218_cdef, },
 	{ .compatible = "issi,is31fl3216", .data = &is31fl3216_cdef, },
 	{ .compatible = "si-en,sn3216",    .data = &is31fl3216_cdef, },
 	{},
 };

 MODULE_DEVICE_TABLE(of, of_is31fl32xx_match);

 static int is31fl32xx_probe(struct i2c_client *client,
 			    const struct i2c_device_id *id)
 {
 	const struct is31fl32xx_chipdef *cdef;
 	struct device *dev = &client->dev;
 	struct is31fl32xx_priv *priv;
 	int count;
 	int ret = 0;

 	cdef = device_get_match_data(dev);

 	count = of_get_available_child_count(dev_of_node(dev));
 	if (!count)
 		return -EINVAL;

 	priv = devm_kzalloc(dev, struct_size(priv, leds, count),
 			    GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;

 	priv->client = client;
 	priv->cdef = cdef;
 	i2c_set_clientdata(client, priv);

 	ret = is31fl32xx_init_regs(priv);
 	if (ret)
 		return ret;

 	ret = is31fl32xx_parse_dt(dev, priv);
 	if (ret)
 		return ret;

 	return 0;
 }

 static int is31fl32xx_remove(struct i2c_client *client)
 {
 	struct is31fl32xx_priv *priv = i2c_get_clientdata(client);

 	return is31fl32xx_reset_regs(priv);
 }

 /*
  * i2c-core (and modalias) requires that id_table be properly filled,
  * even though it is not used for DeviceTree based instantiation.
  */
 static const struct i2c_device_id is31fl32xx_id[] = {
 	{ "is31fl3236" },
 	{ "is31fl3235" },
 	{ "is31fl3218" },
 	{ "sn3218" },
 	{ "is31fl3216" },
 	{ "sn3216" },
 	{},
 };

 MODULE_DEVICE_TABLE(i2c, is31fl32xx_id);

 static struct i2c_driver is31fl32xx_driver = {
 	.driver = {
 		.name	= "is31fl32xx",
 		.of_match_table = of_is31fl32xx_match,
 	},
 	.probe		= is31fl32xx_probe,
 	.remove		= is31fl32xx_remove,
 	.id_table	= is31fl32xx_id,
 };

 module_i2c_driver(is31fl32xx_driver);

 MODULE_AUTHOR("David Rivshin <drivshin@allworx.com>");
 MODULE_DESCRIPTION("ISSI IS31FL32xx LED driver");
 MODULE_LICENSE("GPL v2");
	// SPDX-License-Identifier: GPL-2.0-only
	/*
	* Driver for ISSI IS31FL32xx family of I2C LED controllers
	*
	* Copyright 2015 Allworx Corp.
	*
	* Datasheets:
	* http://www.issi.com/US/product-analog-fxled-driver.shtml
	* http://www.si-en.com/product.asp?parentid=890
	*/

	#include <linux/device.h>
	#include <linux/i2c.h>
	#include <linux/kernel.h>
	#include <linux/leds.h>
	#include <linux/module.h>
	#include <linux/of.h>
	#include <linux/of_device.h>

	/* Used to indicate a device has no such register */
	#define IS31FL32XX_REG_NONE 0xFF

	/* Software Shutdown bit in Shutdown Register */
	#define IS31FL32XX_SHUTDOWN_SSD_ENABLE 0
	#define IS31FL32XX_SHUTDOWN_SSD_DISABLE BIT(0)

	/* IS31FL3216 has a number of unique registers */
	#define IS31FL3216_CONFIG_REG 0x00
	#define IS31FL3216_LIGHTING_EFFECT_REG 0x03
	#define IS31FL3216_CHANNEL_CONFIG_REG 0x04

	/* Software Shutdown bit in 3216 Config Register */
	#define IS31FL3216_CONFIG_SSD_ENABLE BIT(7)
	#define IS31FL3216_CONFIG_SSD_DISABLE 0

	struct is31fl32xx_priv;
	struct is31fl32xx_led_data {
	struct led_classdev cdev;
	u8 channel; /* 1-based, max priv->cdef->channels */
	struct is31fl32xx_priv *priv;
	};

	struct is31fl32xx_priv {
	const struct is31fl32xx_chipdef *cdef;
	struct i2c_client *client;
	unsigned int num_leds;
	struct is31fl32xx_led_data leds[];
	};

	/**
	* struct is31fl32xx_chipdef - chip-specific attributes
	* @channels : Number of LED channels
	* @shutdown_reg : address of Shutdown register (optional)
	* @pwm_update_reg : address of PWM Update register
	* @global_control_reg : address of Global Control register (optional)
	* @reset_reg : address of Reset register (optional)
	* @pwm_register_base : address of first PWM register
	* @pwm_registers_reversed: : true if PWM registers count down instead of up
	* @led_control_register_base : address of first LED control register (optional)
	* @enable_bits_per_led_control_register: number of LEDs enable bits in each
	* @reset_func: : pointer to reset function
	*
	* For all optional register addresses, the sentinel value %IS31FL32XX_REG_NONE
	* indicates that this chip has no such register.
	*
	* If non-NULL, @reset_func will be called during probing to set all
	* necessary registers to a known initialization state. This is needed
	* for chips that do not have a @reset_reg.
	*
	* @enable_bits_per_led_control_register must be >=1 if
	* @led_control_register_base != %IS31FL32XX_REG_NONE.
	*/
	struct is31fl32xx_chipdef {
	u8 channels;
	u8 shutdown_reg;
	u8 pwm_update_reg;
	u8 global_control_reg;
	u8 reset_reg;
	u8 pwm_register_base;
	bool pwm_registers_reversed;
	u8 led_control_register_base;
	u8 enable_bits_per_led_control_register;
	int (reset_func)(struct is31fl32xx_priv priv);
	int (sw_shutdown_func)(struct is31fl32xx_priv priv, bool enable);
	};

	static const struct is31fl32xx_chipdef is31fl3236_cdef = {
	.channels = 36,
	.shutdown_reg = 0x00,
	.pwm_update_reg = 0x25,
	.global_control_reg = 0x4a,
	.reset_reg = 0x4f,
	.pwm_register_base = 0x01,
	.led_control_register_base = 0x26,
	.enable_bits_per_led_control_register = 1,
	};

	static const struct is31fl32xx_chipdef is31fl3235_cdef = {
	.channels = 28,
	.shutdown_reg = 0x00,
	.pwm_update_reg = 0x25,
	.global_control_reg = 0x4a,
	.reset_reg = 0x4f,
	.pwm_register_base = 0x05,
	.led_control_register_base = 0x2a,
	.enable_bits_per_led_control_register = 1,
	};

	static const struct is31fl32xx_chipdef is31fl3218_cdef = {
	.channels = 18,
	.shutdown_reg = 0x00,
	.pwm_update_reg = 0x16,
	.global_control_reg = IS31FL32XX_REG_NONE,
	.reset_reg = 0x17,
	.pwm_register_base = 0x01,
	.led_control_register_base = 0x13,
	.enable_bits_per_led_control_register = 6,
	};

	static int is31fl3216_reset(struct is31fl32xx_priv *priv);
	static int is31fl3216_software_shutdown(struct is31fl32xx_priv *priv,
	bool enable);
	static const struct is31fl32xx_chipdef is31fl3216_cdef = {
	.channels = 16,
	.shutdown_reg = IS31FL32XX_REG_NONE,
	.pwm_update_reg = 0xB0,
	.global_control_reg = IS31FL32XX_REG_NONE,
	.reset_reg = IS31FL32XX_REG_NONE,
	.pwm_register_base = 0x10,
	.pwm_registers_reversed = true,
	.led_control_register_base = 0x01,
	.enable_bits_per_led_control_register = 8,
	.reset_func = is31fl3216_reset,
	.sw_shutdown_func = is31fl3216_software_shutdown,
	};

	static int is31fl32xx_write(struct is31fl32xx_priv *priv, u8 reg, u8 val)
	{
	int ret;

	dev_dbg(&priv->client->dev, "writing register 0x%02X=0x%02X", reg, val);

	ret = i2c_smbus_write_byte_data(priv->client, reg, val);
	if (ret) {
	dev_err(&priv->client->dev,
	"register write to 0x%02X failed (error %d)",
	reg, ret);
	}
	return ret;
	}

	/*
	* Custom reset function for IS31FL3216 because it does not have a RESET
	* register the way that the other IS31FL32xx chips do. We don't bother
	* writing the GPIO and animation registers, because the registers we
	* do write ensure those will have no effect.
	*/
	static int is31fl3216_reset(struct is31fl32xx_priv *priv)
	{
	unsigned int i;
	int ret;

	ret = is31fl32xx_write(priv, IS31FL3216_CONFIG_REG,
	IS31FL3216_CONFIG_SSD_ENABLE);
	if (ret)
	return ret;
	for (i = 0; i < priv->cdef->channels; i++) {
	ret = is31fl32xx_write(priv, priv->cdef->pwm_register_base+i,
	0x00);
	if (ret)
	return ret;
	}
	ret = is31fl32xx_write(priv, priv->cdef->pwm_update_reg, 0);
	if (ret)
	return ret;
	ret = is31fl32xx_write(priv, IS31FL3216_LIGHTING_EFFECT_REG, 0x00);
	if (ret)
	return ret;
	ret = is31fl32xx_write(priv, IS31FL3216_CHANNEL_CONFIG_REG, 0x00);
	if (ret)
	return ret;

	return 0;
	}

	/*
	* Custom Software-Shutdown function for IS31FL3216 because it does not have
	* a SHUTDOWN register the way that the other IS31FL32xx chips do.
	* We don't bother doing a read/modify/write on the CONFIG register because
	* we only ever use a value of '0' for the other fields in that register.
	*/
	static int is31fl3216_software_shutdown(struct is31fl32xx_priv *priv,
	bool enable)
	{
	u8 value = enable ? IS31FL3216_CONFIG_SSD_ENABLE :
	IS31FL3216_CONFIG_SSD_DISABLE;

	return is31fl32xx_write(priv, IS31FL3216_CONFIG_REG, value);
	}

	/*
	* NOTE: A mutex is not needed in this function because:
	* - All referenced data is read-only after probe()
	* - The I2C core has a mutex on to protect the bus
	* - There are no read/modify/write operations
	* - Intervening operations between the write of the PWM register
	* and the Update register are harmless.
	*
	* Example:
	* PWM_REG_1 write 16
	* UPDATE_REG write 0
	* PWM_REG_2 write 128
	* UPDATE_REG write 0
	* vs:
	* PWM_REG_1 write 16
	* PWM_REG_2 write 128
	* UPDATE_REG write 0
	* UPDATE_REG write 0
	* are equivalent. Poking the Update register merely applies all PWM
	* register writes up to that point.
	*/
	static int is31fl32xx_brightness_set(struct led_classdev *led_cdev,
	enum led_brightness brightness)
	{
	const struct is31fl32xx_led_data *led_data =
	container_of(led_cdev, struct is31fl32xx_led_data, cdev);
	const struct is31fl32xx_chipdef *cdef = led_data->priv->cdef;
	u8 pwm_register_offset;
	int ret;

	dev_dbg(led_cdev->dev, "%s: %d\n", __func__, brightness);

	/* NOTE: led_data->channel is 1-based */
	if (cdef->pwm_registers_reversed)
	pwm_register_offset = cdef->channels - led_data->channel;
	else
	pwm_register_offset = led_data->channel - 1;

	ret = is31fl32xx_write(led_data->priv,
	cdef->pwm_register_base + pwm_register_offset,
	brightness);
	if (ret)
	return ret;

	return is31fl32xx_write(led_data->priv, cdef->pwm_update_reg, 0);
	}

	static int is31fl32xx_reset_regs(struct is31fl32xx_priv *priv)
	{
	const struct is31fl32xx_chipdef *cdef = priv->cdef;
	int ret;

	if (cdef->reset_reg != IS31FL32XX_REG_NONE) {
	ret = is31fl32xx_write(priv, cdef->reset_reg, 0);
	if (ret)
	return ret;
	}

	if (cdef->reset_func)
	return cdef->reset_func(priv);

	return 0;
	}

	static int is31fl32xx_software_shutdown(struct is31fl32xx_priv *priv,
	bool enable)
	{
	const struct is31fl32xx_chipdef *cdef = priv->cdef;
	int ret;

	if (cdef->shutdown_reg != IS31FL32XX_REG_NONE) {
	u8 value = enable ? IS31FL32XX_SHUTDOWN_SSD_ENABLE :
	IS31FL32XX_SHUTDOWN_SSD_DISABLE;
	ret = is31fl32xx_write(priv, cdef->shutdown_reg, value);
	if (ret)
	return ret;
	}

	if (cdef->sw_shutdown_func)
	return cdef->sw_shutdown_func(priv, enable);

	return 0;
	}

	static int is31fl32xx_init_regs(struct is31fl32xx_priv *priv)
	{
	const struct is31fl32xx_chipdef *cdef = priv->cdef;
	int ret;

	ret = is31fl32xx_reset_regs(priv);
	if (ret)
	return ret;

	/*
	* Set enable bit for all channels.
	* We will control state with PWM registers alone.
	*/
	if (cdef->led_control_register_base != IS31FL32XX_REG_NONE) {
	u8 value =
	GENMASK(cdef->enable_bits_per_led_control_register-1, 0);
	u8 num_regs = cdef->channels /
	cdef->enable_bits_per_led_control_register;
	int i;

	for (i = 0; i < num_regs; i++) {
	ret = is31fl32xx_write(priv,
	cdef->led_control_register_base+i,
	value);
	if (ret)
	return ret;
	}
	}

	ret = is31fl32xx_software_shutdown(priv, false);
	if (ret)
	return ret;

	if (cdef->global_control_reg != IS31FL32XX_REG_NONE) {
	ret = is31fl32xx_write(priv, cdef->global_control_reg, 0x00);
	if (ret)
	return ret;
	}

	return 0;
	}

	static int is31fl32xx_parse_child_dt(const struct device *dev,
	const struct device_node *child,
	struct is31fl32xx_led_data *led_data)
	{
	struct led_classdev *cdev = &led_data->cdev;
	int ret = 0;
	u32 reg;

	ret = of_property_read_u32(child, "reg", &reg);
	if (ret \|\| reg < 1 \|\| reg > led_data->priv->cdef->channels) {
	dev_err(dev,
	"Child node %pOF does not have a valid reg property\n",
	child);
	return -EINVAL;
	}
	led_data->channel = reg;

	of_property_read_string(child, "linux,default-trigger",
	&cdev->default_trigger);

	cdev->brightness_set_blocking = is31fl32xx_brightness_set;

	return 0;
	}

	static struct is31fl32xx_led_data *is31fl32xx_find_led_data(
	struct is31fl32xx_priv *priv,
	u8 channel)
	{
	size_t i;

	for (i = 0; i < priv->num_leds; i++) {
	if (priv->leds[i].channel == channel)
	return &priv->leds[i];
	}

	return NULL;
	}

	static int is31fl32xx_parse_dt(struct device *dev,
	struct is31fl32xx_priv *priv)
	{
	struct device_node *child;
	int ret = 0;

	for_each_available_child_of_node(dev_of_node(dev), child) {
	struct led_init_data init_data = {};
	struct is31fl32xx_led_data *led_data =
	&priv->leds[priv->num_leds];
	const struct is31fl32xx_led_data *other_led_data;

	led_data->priv = priv;

	ret = is31fl32xx_parse_child_dt(dev, child, led_data);
	if (ret)
	goto err;

	/* Detect if channel is already in use by another child */
	other_led_data = is31fl32xx_find_led_data(priv,
	led_data->channel);
	if (other_led_data) {
	dev_err(dev,
	"Node %pOF 'reg' conflicts with another LED\n",
	child);
	goto err;
	}

	init_data.fwnode = of_fwnode_handle(child);

	ret = devm_led_classdev_register_ext(dev, &led_data->cdev,
	&init_data);
	if (ret) {
	dev_err(dev, "Failed to register LED for %pOF: %d\n",
	child, ret);
	goto err;
	}

	priv->num_leds++;
	}

	return 0;

	err:
	of_node_put(child);
	return ret;
	}

	static const struct of_device_id of_is31fl32xx_match[] = {
	{ .compatible = "issi,is31fl3236", .data = &is31fl3236_cdef, },
	{ .compatible = "issi,is31fl3235", .data = &is31fl3235_cdef, },
	{ .compatible = "issi,is31fl3218", .data = &is31fl3218_cdef, },
	{ .compatible = "si-en,sn3218", .data = &is31fl3218_cdef, },
	{ .compatible = "issi,is31fl3216", .data = &is31fl3216_cdef, },
	{ .compatible = "si-en,sn3216", .data = &is31fl3216_cdef, },
	{},
	};

	MODULE_DEVICE_TABLE(of, of_is31fl32xx_match);

	static int is31fl32xx_probe(struct i2c_client *client,
	const struct i2c_device_id *id)
	{
	const struct is31fl32xx_chipdef *cdef;
	struct device *dev = &client->dev;
	struct is31fl32xx_priv *priv;
	int count;
	int ret = 0;

	cdef = device_get_match_data(dev);

	count = of_get_available_child_count(dev_of_node(dev));
	if (!count)
	return -EINVAL;

	priv = devm_kzalloc(dev, struct_size(priv, leds, count),
	GFP_KERNEL);
	if (!priv)
	return -ENOMEM;

	priv->client = client;
	priv->cdef = cdef;
	i2c_set_clientdata(client, priv);

	ret = is31fl32xx_init_regs(priv);
	if (ret)
	return ret;

	ret = is31fl32xx_parse_dt(dev, priv);
	if (ret)
	return ret;

	return 0;
	}

	static int is31fl32xx_remove(struct i2c_client *client)
	{
	struct is31fl32xx_priv *priv = i2c_get_clientdata(client);

	return is31fl32xx_reset_regs(priv);
	}

	/*
	* i2c-core (and modalias) requires that id_table be properly filled,
	* even though it is not used for DeviceTree based instantiation.
	*/
	static const struct i2c_device_id is31fl32xx_id[] = {
	{ "is31fl3236" },
	{ "is31fl3235" },
	{ "is31fl3218" },
	{ "sn3218" },
	{ "is31fl3216" },
	{ "sn3216" },
	{},
	};

	MODULE_DEVICE_TABLE(i2c, is31fl32xx_id);

	static struct i2c_driver is31fl32xx_driver = {
	.driver = {
	.name = "is31fl32xx",
	.of_match_table = of_is31fl32xx_match,
	},
	.probe = is31fl32xx_probe,
	.remove = is31fl32xx_remove,
	.id_table = is31fl32xx_id,
	};

	module_i2c_driver(is31fl32xx_driver);

	MODULE_AUTHOR("David Rivshin <drivshin@allworx.com>");
	MODULE_DESCRIPTION("ISSI IS31FL32xx LED driver");
	MODULE_LICENSE("GPL v2");