| // SPDX-License-Identifier: GPL-2.0 |
| // TI LP50XX LED chip family driver |
| // Copyright (C) 2018-20 Texas Instruments Incorporated - https://www.ti.com/ |
| |
| #include <linux/gpio/consumer.h> |
| #include <linux/i2c.h> |
| #include <linux/init.h> |
| #include <linux/leds.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/of.h> |
| #include <linux/of_gpio.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/slab.h> |
| #include <uapi/linux/uleds.h> |
| |
| #include <linux/led-class-multicolor.h> |
| |
| #include "leds.h" |
| |
| #define LP50XX_DEV_CFG0 0x00 |
| #define LP50XX_DEV_CFG1 0x01 |
| #define LP50XX_LED_CFG0 0x02 |
| |
| /* LP5009 and LP5012 registers */ |
| #define LP5012_BNK_BRT 0x03 |
| #define LP5012_BNKA_CLR 0x04 |
| #define LP5012_BNKB_CLR 0x05 |
| #define LP5012_BNKC_CLR 0x06 |
| #define LP5012_LED0_BRT 0x07 |
| #define LP5012_OUT0_CLR 0x0b |
| #define LP5012_RESET 0x17 |
| |
| /* LP5018 and LP5024 registers */ |
| #define LP5024_BNK_BRT 0x03 |
| #define LP5024_BNKA_CLR 0x04 |
| #define LP5024_BNKB_CLR 0x05 |
| #define LP5024_BNKC_CLR 0x06 |
| #define LP5024_LED0_BRT 0x07 |
| #define LP5024_OUT0_CLR 0x0f |
| #define LP5024_RESET 0x27 |
| |
| /* LP5030 and LP5036 registers */ |
| #define LP5036_LED_CFG1 0x03 |
| #define LP5036_BNK_BRT 0x04 |
| #define LP5036_BNKA_CLR 0x05 |
| #define LP5036_BNKB_CLR 0x06 |
| #define LP5036_BNKC_CLR 0x07 |
| #define LP5036_LED0_BRT 0x08 |
| #define LP5036_OUT0_CLR 0x14 |
| #define LP5036_RESET 0x38 |
| |
| #define LP50XX_SW_RESET 0xff |
| #define LP50XX_CHIP_EN BIT(6) |
| |
| /* There are 3 LED outputs per bank */ |
| #define LP50XX_LEDS_PER_MODULE 3 |
| |
| #define LP5009_MAX_LED_MODULES 2 |
| #define LP5012_MAX_LED_MODULES 4 |
| #define LP5018_MAX_LED_MODULES 6 |
| #define LP5024_MAX_LED_MODULES 8 |
| #define LP5030_MAX_LED_MODULES 10 |
| #define LP5036_MAX_LED_MODULES 12 |
| |
| static const struct reg_default lp5012_reg_defs[] = { |
| {LP50XX_DEV_CFG0, 0x0}, |
| {LP50XX_DEV_CFG1, 0x3c}, |
| {LP50XX_LED_CFG0, 0x0}, |
| {LP5012_BNK_BRT, 0xff}, |
| {LP5012_BNKA_CLR, 0x0f}, |
| {LP5012_BNKB_CLR, 0x0f}, |
| {LP5012_BNKC_CLR, 0x0f}, |
| {LP5012_LED0_BRT, 0x0f}, |
| /* LEDX_BRT registers are all 0xff for defaults */ |
| {0x08, 0xff}, {0x09, 0xff}, {0x0a, 0xff}, |
| {LP5012_OUT0_CLR, 0x0f}, |
| /* OUTX_CLR registers are all 0x0 for defaults */ |
| {0x0c, 0x00}, {0x0d, 0x00}, {0x0e, 0x00}, {0x0f, 0x00}, {0x10, 0x00}, |
| {0x11, 0x00}, {0x12, 0x00}, {0x13, 0x00}, {0x14, 0x00}, {0x15, 0x00}, |
| {0x16, 0x00}, |
| {LP5012_RESET, 0x00} |
| }; |
| |
| static const struct reg_default lp5024_reg_defs[] = { |
| {LP50XX_DEV_CFG0, 0x0}, |
| {LP50XX_DEV_CFG1, 0x3c}, |
| {LP50XX_LED_CFG0, 0x0}, |
| {LP5024_BNK_BRT, 0xff}, |
| {LP5024_BNKA_CLR, 0x0f}, |
| {LP5024_BNKB_CLR, 0x0f}, |
| {LP5024_BNKC_CLR, 0x0f}, |
| {LP5024_LED0_BRT, 0x0f}, |
| /* LEDX_BRT registers are all 0xff for defaults */ |
| {0x08, 0xff}, {0x09, 0xff}, {0x0a, 0xff}, {0x0b, 0xff}, {0x0c, 0xff}, |
| {0x0d, 0xff}, {0x0e, 0xff}, |
| {LP5024_OUT0_CLR, 0x0f}, |
| /* OUTX_CLR registers are all 0x0 for defaults */ |
| {0x10, 0x00}, {0x11, 0x00}, {0x12, 0x00}, {0x13, 0x00}, {0x14, 0x00}, |
| {0x15, 0x00}, {0x16, 0x00}, {0x17, 0x00}, {0x18, 0x00}, {0x19, 0x00}, |
| {0x1a, 0x00}, {0x1b, 0x00}, {0x1c, 0x00}, {0x1d, 0x00}, {0x1e, 0x00}, |
| {0x1f, 0x00}, {0x20, 0x00}, {0x21, 0x00}, {0x22, 0x00}, {0x23, 0x00}, |
| {0x24, 0x00}, {0x25, 0x00}, {0x26, 0x00}, |
| {LP5024_RESET, 0x00} |
| }; |
| |
| static const struct reg_default lp5036_reg_defs[] = { |
| {LP50XX_DEV_CFG0, 0x0}, |
| {LP50XX_DEV_CFG1, 0x3c}, |
| {LP50XX_LED_CFG0, 0x0}, |
| {LP5036_LED_CFG1, 0x0}, |
| {LP5036_BNK_BRT, 0xff}, |
| {LP5036_BNKA_CLR, 0x0f}, |
| {LP5036_BNKB_CLR, 0x0f}, |
| {LP5036_BNKC_CLR, 0x0f}, |
| {LP5036_LED0_BRT, 0x0f}, |
| /* LEDX_BRT registers are all 0xff for defaults */ |
| {0x08, 0xff}, {0x09, 0xff}, {0x0a, 0xff}, {0x0b, 0xff}, {0x0c, 0xff}, |
| {0x0d, 0xff}, {0x0e, 0xff}, {0x0f, 0xff}, {0x10, 0xff}, {0x11, 0xff}, |
| {0x12, 0xff}, {0x13, 0xff}, |
| {LP5036_OUT0_CLR, 0x0f}, |
| /* OUTX_CLR registers are all 0x0 for defaults */ |
| {0x15, 0x00}, {0x16, 0x00}, {0x17, 0x00}, {0x18, 0x00}, {0x19, 0x00}, |
| {0x1a, 0x00}, {0x1b, 0x00}, {0x1c, 0x00}, {0x1d, 0x00}, {0x1e, 0x00}, |
| {0x1f, 0x00}, {0x20, 0x00}, {0x21, 0x00}, {0x22, 0x00}, {0x23, 0x00}, |
| {0x24, 0x00}, {0x25, 0x00}, {0x26, 0x00}, {0x27, 0x00}, {0x28, 0x00}, |
| {0x29, 0x00}, {0x2a, 0x00}, {0x2b, 0x00}, {0x2c, 0x00}, {0x2d, 0x00}, |
| {0x2e, 0x00}, {0x2f, 0x00}, {0x30, 0x00}, {0x31, 0x00}, {0x32, 0x00}, |
| {0x33, 0x00}, {0x34, 0x00}, {0x35, 0x00}, {0x36, 0x00}, {0x37, 0x00}, |
| {LP5036_RESET, 0x00} |
| }; |
| |
| static const struct regmap_config lp5012_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| |
| .max_register = LP5012_RESET, |
| .reg_defaults = lp5012_reg_defs, |
| .num_reg_defaults = ARRAY_SIZE(lp5012_reg_defs), |
| .cache_type = REGCACHE_FLAT, |
| }; |
| |
| static const struct regmap_config lp5024_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| |
| .max_register = LP5024_RESET, |
| .reg_defaults = lp5024_reg_defs, |
| .num_reg_defaults = ARRAY_SIZE(lp5024_reg_defs), |
| .cache_type = REGCACHE_FLAT, |
| }; |
| |
| static const struct regmap_config lp5036_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| |
| .max_register = LP5036_RESET, |
| .reg_defaults = lp5036_reg_defs, |
| .num_reg_defaults = ARRAY_SIZE(lp5036_reg_defs), |
| .cache_type = REGCACHE_FLAT, |
| }; |
| |
| enum lp50xx_model { |
| LP5009, |
| LP5012, |
| LP5018, |
| LP5024, |
| LP5030, |
| LP5036, |
| }; |
| |
| /** |
| * struct lp50xx_chip_info - |
| * @lp50xx_regmap_config: regmap register configuration |
| * @model_id: LED device model |
| * @max_modules: total number of supported LED modules |
| * @num_leds: number of LED outputs available on the device |
| * @led_brightness0_reg: first brightness register of the device |
| * @mix_out0_reg: first color mix register of the device |
| * @bank_brt_reg: bank brightness register |
| * @bank_mix_reg: color mix register |
| * @reset_reg: device reset register |
| */ |
| struct lp50xx_chip_info { |
| const struct regmap_config *lp50xx_regmap_config; |
| int model_id; |
| u8 max_modules; |
| u8 num_leds; |
| u8 led_brightness0_reg; |
| u8 mix_out0_reg; |
| u8 bank_brt_reg; |
| u8 bank_mix_reg; |
| u8 reset_reg; |
| }; |
| |
| static const struct lp50xx_chip_info lp50xx_chip_info_tbl[] = { |
| [LP5009] = { |
| .model_id = LP5009, |
| .max_modules = LP5009_MAX_LED_MODULES, |
| .num_leds = LP5009_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE, |
| .led_brightness0_reg = LP5012_LED0_BRT, |
| .mix_out0_reg = LP5012_OUT0_CLR, |
| .bank_brt_reg = LP5012_BNK_BRT, |
| .bank_mix_reg = LP5012_BNKA_CLR, |
| .reset_reg = LP5012_RESET, |
| .lp50xx_regmap_config = &lp5012_regmap_config, |
| }, |
| [LP5012] = { |
| .model_id = LP5012, |
| .max_modules = LP5012_MAX_LED_MODULES, |
| .num_leds = LP5012_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE, |
| .led_brightness0_reg = LP5012_LED0_BRT, |
| .mix_out0_reg = LP5012_OUT0_CLR, |
| .bank_brt_reg = LP5012_BNK_BRT, |
| .bank_mix_reg = LP5012_BNKA_CLR, |
| .reset_reg = LP5012_RESET, |
| .lp50xx_regmap_config = &lp5012_regmap_config, |
| }, |
| [LP5018] = { |
| .model_id = LP5018, |
| .max_modules = LP5018_MAX_LED_MODULES, |
| .num_leds = LP5018_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE, |
| .led_brightness0_reg = LP5024_LED0_BRT, |
| .mix_out0_reg = LP5024_OUT0_CLR, |
| .bank_brt_reg = LP5024_BNK_BRT, |
| .bank_mix_reg = LP5024_BNKA_CLR, |
| .reset_reg = LP5024_RESET, |
| .lp50xx_regmap_config = &lp5024_regmap_config, |
| }, |
| [LP5024] = { |
| .model_id = LP5024, |
| .max_modules = LP5024_MAX_LED_MODULES, |
| .num_leds = LP5024_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE, |
| .led_brightness0_reg = LP5024_LED0_BRT, |
| .mix_out0_reg = LP5024_OUT0_CLR, |
| .bank_brt_reg = LP5024_BNK_BRT, |
| .bank_mix_reg = LP5024_BNKA_CLR, |
| .reset_reg = LP5024_RESET, |
| .lp50xx_regmap_config = &lp5024_regmap_config, |
| }, |
| [LP5030] = { |
| .model_id = LP5030, |
| .max_modules = LP5030_MAX_LED_MODULES, |
| .num_leds = LP5030_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE, |
| .led_brightness0_reg = LP5036_LED0_BRT, |
| .mix_out0_reg = LP5036_OUT0_CLR, |
| .bank_brt_reg = LP5036_BNK_BRT, |
| .bank_mix_reg = LP5036_BNKA_CLR, |
| .reset_reg = LP5036_RESET, |
| .lp50xx_regmap_config = &lp5036_regmap_config, |
| }, |
| [LP5036] = { |
| .model_id = LP5036, |
| .max_modules = LP5036_MAX_LED_MODULES, |
| .num_leds = LP5036_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE, |
| .led_brightness0_reg = LP5036_LED0_BRT, |
| .mix_out0_reg = LP5036_OUT0_CLR, |
| .bank_brt_reg = LP5036_BNK_BRT, |
| .bank_mix_reg = LP5036_BNKA_CLR, |
| .reset_reg = LP5036_RESET, |
| .lp50xx_regmap_config = &lp5036_regmap_config, |
| }, |
| }; |
| |
| struct lp50xx_led { |
| struct led_classdev_mc mc_cdev; |
| struct lp50xx *priv; |
| unsigned long bank_modules; |
| int led_intensity[LP50XX_LEDS_PER_MODULE]; |
| u8 ctrl_bank_enabled; |
| int led_number; |
| }; |
| |
| /** |
| * struct lp50xx - |
| * @enable_gpio: hardware enable gpio |
| * @regulator: LED supply regulator pointer |
| * @client: pointer to the I2C client |
| * @regmap: device register map |
| * @dev: pointer to the devices device struct |
| * @lock: lock for reading/writing the device |
| * @chip_info: chip specific information (ie num_leds) |
| * @num_of_banked_leds: holds the number of banked LEDs |
| * @leds: array of LED strings |
| */ |
| struct lp50xx { |
| struct gpio_desc *enable_gpio; |
| struct regulator *regulator; |
| struct i2c_client *client; |
| struct regmap *regmap; |
| struct device *dev; |
| struct mutex lock; |
| const struct lp50xx_chip_info *chip_info; |
| int num_of_banked_leds; |
| |
| /* This needs to be at the end of the struct */ |
| struct lp50xx_led leds[]; |
| }; |
| |
| static struct lp50xx_led *mcled_cdev_to_led(struct led_classdev_mc *mc_cdev) |
| { |
| return container_of(mc_cdev, struct lp50xx_led, mc_cdev); |
| } |
| |
| static int lp50xx_brightness_set(struct led_classdev *cdev, |
| enum led_brightness brightness) |
| { |
| struct led_classdev_mc *mc_dev = lcdev_to_mccdev(cdev); |
| struct lp50xx_led *led = mcled_cdev_to_led(mc_dev); |
| const struct lp50xx_chip_info *led_chip = led->priv->chip_info; |
| u8 led_offset, reg_val; |
| int ret = 0; |
| int i; |
| |
| mutex_lock(&led->priv->lock); |
| if (led->ctrl_bank_enabled) |
| reg_val = led_chip->bank_brt_reg; |
| else |
| reg_val = led_chip->led_brightness0_reg + |
| led->led_number; |
| |
| ret = regmap_write(led->priv->regmap, reg_val, brightness); |
| if (ret) { |
| dev_err(&led->priv->client->dev, |
| "Cannot write brightness value %d\n", ret); |
| goto out; |
| } |
| |
| for (i = 0; i < led->mc_cdev.num_colors; i++) { |
| if (led->ctrl_bank_enabled) { |
| reg_val = led_chip->bank_mix_reg + i; |
| } else { |
| led_offset = (led->led_number * 3) + i; |
| reg_val = led_chip->mix_out0_reg + led_offset; |
| } |
| |
| ret = regmap_write(led->priv->regmap, reg_val, |
| mc_dev->subled_info[i].intensity); |
| if (ret) { |
| dev_err(&led->priv->client->dev, |
| "Cannot write intensity value %d\n", ret); |
| goto out; |
| } |
| } |
| out: |
| mutex_unlock(&led->priv->lock); |
| return ret; |
| } |
| |
| static int lp50xx_set_banks(struct lp50xx *priv, u32 led_banks[]) |
| { |
| u8 led_config_lo, led_config_hi; |
| u32 bank_enable_mask = 0; |
| int ret; |
| int i; |
| |
| for (i = 0; i < priv->chip_info->max_modules; i++) { |
| if (led_banks[i]) |
| bank_enable_mask |= (1 << led_banks[i]); |
| } |
| |
| led_config_lo = (u8)(bank_enable_mask & 0xff); |
| led_config_hi = (u8)(bank_enable_mask >> 8) & 0xff; |
| |
| ret = regmap_write(priv->regmap, LP50XX_LED_CFG0, led_config_lo); |
| if (ret) |
| return ret; |
| |
| if (priv->chip_info->model_id >= LP5030) |
| ret = regmap_write(priv->regmap, LP5036_LED_CFG1, led_config_hi); |
| |
| return ret; |
| } |
| |
| static int lp50xx_reset(struct lp50xx *priv) |
| { |
| return regmap_write(priv->regmap, priv->chip_info->reset_reg, LP50XX_SW_RESET); |
| } |
| |
| static int lp50xx_enable_disable(struct lp50xx *priv, int enable_disable) |
| { |
| int ret; |
| |
| if (priv->enable_gpio) { |
| ret = gpiod_direction_output(priv->enable_gpio, enable_disable); |
| if (ret) |
| return ret; |
| } |
| |
| if (enable_disable) |
| return regmap_write(priv->regmap, LP50XX_DEV_CFG0, LP50XX_CHIP_EN); |
| else |
| return regmap_write(priv->regmap, LP50XX_DEV_CFG0, 0); |
| |
| } |
| |
| static int lp50xx_probe_leds(struct fwnode_handle *child, struct lp50xx *priv, |
| struct lp50xx_led *led, int num_leds) |
| { |
| u32 led_banks[LP5036_MAX_LED_MODULES] = {0}; |
| int led_number; |
| int ret; |
| |
| if (num_leds > 1) { |
| if (num_leds > priv->chip_info->max_modules) { |
| dev_err(&priv->client->dev, "reg property is invalid\n"); |
| return -EINVAL; |
| } |
| |
| priv->num_of_banked_leds = num_leds; |
| |
| ret = fwnode_property_read_u32_array(child, "reg", led_banks, num_leds); |
| if (ret) { |
| dev_err(&priv->client->dev, "reg property is missing\n"); |
| return ret; |
| } |
| |
| ret = lp50xx_set_banks(priv, led_banks); |
| if (ret) { |
| dev_err(&priv->client->dev, "Cannot setup banked LEDs\n"); |
| return ret; |
| } |
| |
| led->ctrl_bank_enabled = 1; |
| } else { |
| ret = fwnode_property_read_u32(child, "reg", &led_number); |
| if (ret) { |
| dev_err(&priv->client->dev, "led reg property missing\n"); |
| return ret; |
| } |
| |
| if (led_number > priv->chip_info->num_leds) { |
| dev_err(&priv->client->dev, "led-sources property is invalid\n"); |
| return -EINVAL; |
| } |
| |
| led->led_number = led_number; |
| } |
| |
| return 0; |
| } |
| |
| static int lp50xx_probe_dt(struct lp50xx *priv) |
| { |
| struct fwnode_handle *child = NULL; |
| struct fwnode_handle *led_node = NULL; |
| struct led_init_data init_data = {}; |
| struct led_classdev *led_cdev; |
| struct mc_subled *mc_led_info; |
| struct lp50xx_led *led; |
| int ret = -EINVAL; |
| int num_colors; |
| u32 color_id; |
| int i = 0; |
| |
| priv->enable_gpio = devm_gpiod_get_optional(priv->dev, "enable", GPIOD_OUT_LOW); |
| if (IS_ERR(priv->enable_gpio)) { |
| ret = PTR_ERR(priv->enable_gpio); |
| dev_err(&priv->client->dev, "Failed to get enable gpio: %d\n", |
| ret); |
| return ret; |
| } |
| |
| priv->regulator = devm_regulator_get(priv->dev, "vled"); |
| if (IS_ERR(priv->regulator)) |
| priv->regulator = NULL; |
| |
| device_for_each_child_node(priv->dev, child) { |
| led = &priv->leds[i]; |
| ret = fwnode_property_count_u32(child, "reg"); |
| if (ret < 0) { |
| dev_err(&priv->client->dev, "reg property is invalid\n"); |
| goto child_out; |
| } |
| |
| ret = lp50xx_probe_leds(child, priv, led, ret); |
| if (ret) |
| goto child_out; |
| |
| init_data.fwnode = child; |
| num_colors = 0; |
| |
| /* |
| * There are only 3 LEDs per module otherwise they should be |
| * banked which also is presented as 3 LEDs. |
| */ |
| mc_led_info = devm_kcalloc(priv->dev, LP50XX_LEDS_PER_MODULE, |
| sizeof(*mc_led_info), GFP_KERNEL); |
| if (!mc_led_info) |
| return -ENOMEM; |
| |
| fwnode_for_each_child_node(child, led_node) { |
| ret = fwnode_property_read_u32(led_node, "color", |
| &color_id); |
| if (ret) { |
| dev_err(priv->dev, "Cannot read color\n"); |
| goto child_out; |
| } |
| |
| mc_led_info[num_colors].color_index = color_id; |
| num_colors++; |
| } |
| |
| led->priv = priv; |
| led->mc_cdev.num_colors = num_colors; |
| led->mc_cdev.subled_info = mc_led_info; |
| led_cdev = &led->mc_cdev.led_cdev; |
| led_cdev->brightness_set_blocking = lp50xx_brightness_set; |
| |
| fwnode_property_read_string(child, "linux,default-trigger", |
| &led_cdev->default_trigger); |
| |
| ret = devm_led_classdev_multicolor_register_ext(&priv->client->dev, |
| &led->mc_cdev, |
| &init_data); |
| if (ret) { |
| dev_err(&priv->client->dev, "led register err: %d\n", |
| ret); |
| goto child_out; |
| } |
| i++; |
| fwnode_handle_put(child); |
| } |
| |
| return 0; |
| |
| child_out: |
| fwnode_handle_put(child); |
| return ret; |
| } |
| |
| static int lp50xx_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct lp50xx *led; |
| int count; |
| int ret; |
| |
| count = device_get_child_node_count(&client->dev); |
| if (!count) { |
| dev_err(&client->dev, "LEDs are not defined in device tree!"); |
| return -ENODEV; |
| } |
| |
| led = devm_kzalloc(&client->dev, struct_size(led, leds, count), |
| GFP_KERNEL); |
| if (!led) |
| return -ENOMEM; |
| |
| mutex_init(&led->lock); |
| led->client = client; |
| led->dev = &client->dev; |
| led->chip_info = &lp50xx_chip_info_tbl[id->driver_data]; |
| i2c_set_clientdata(client, led); |
| led->regmap = devm_regmap_init_i2c(client, |
| led->chip_info->lp50xx_regmap_config); |
| if (IS_ERR(led->regmap)) { |
| ret = PTR_ERR(led->regmap); |
| dev_err(&client->dev, "Failed to allocate register map: %d\n", |
| ret); |
| return ret; |
| } |
| |
| ret = lp50xx_reset(led); |
| if (ret) |
| return ret; |
| |
| ret = lp50xx_enable_disable(led, 1); |
| if (ret) |
| return ret; |
| |
| return lp50xx_probe_dt(led); |
| } |
| |
| static int lp50xx_remove(struct i2c_client *client) |
| { |
| struct lp50xx *led = i2c_get_clientdata(client); |
| int ret; |
| |
| ret = lp50xx_enable_disable(led, 0); |
| if (ret) { |
| dev_err(&led->client->dev, "Failed to disable chip\n"); |
| return ret; |
| } |
| |
| if (led->regulator) { |
| ret = regulator_disable(led->regulator); |
| if (ret) |
| dev_err(&led->client->dev, |
| "Failed to disable regulator\n"); |
| } |
| |
| mutex_destroy(&led->lock); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id lp50xx_id[] = { |
| { "lp5009", LP5009 }, |
| { "lp5012", LP5012 }, |
| { "lp5018", LP5018 }, |
| { "lp5024", LP5024 }, |
| { "lp5030", LP5030 }, |
| { "lp5036", LP5036 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, lp50xx_id); |
| |
| static const struct of_device_id of_lp50xx_leds_match[] = { |
| { .compatible = "ti,lp5009", .data = (void *)LP5009 }, |
| { .compatible = "ti,lp5012", .data = (void *)LP5012 }, |
| { .compatible = "ti,lp5018", .data = (void *)LP5018 }, |
| { .compatible = "ti,lp5024", .data = (void *)LP5024 }, |
| { .compatible = "ti,lp5030", .data = (void *)LP5030 }, |
| { .compatible = "ti,lp5036", .data = (void *)LP5036 }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, of_lp50xx_leds_match); |
| |
| static struct i2c_driver lp50xx_driver = { |
| .driver = { |
| .name = "lp50xx", |
| .of_match_table = of_lp50xx_leds_match, |
| }, |
| .probe = lp50xx_probe, |
| .remove = lp50xx_remove, |
| .id_table = lp50xx_id, |
| }; |
| module_i2c_driver(lp50xx_driver); |
| |
| MODULE_DESCRIPTION("Texas Instruments LP50XX LED driver"); |
| MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>"); |
| MODULE_LICENSE("GPL v2"); |