| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * CPUFreq support for Armada 8K |
| * |
| * Copyright (C) 2018 Marvell |
| * |
| * Omri Itach <omrii@marvell.com> |
| * Gregory Clement <gregory.clement@bootlin.com> |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/clk.h> |
| #include <linux/cpu.h> |
| #include <linux/err.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_opp.h> |
| #include <linux/slab.h> |
| |
| /* |
| * Setup the opps list with the divider for the max frequency, that |
| * will be filled at runtime. |
| */ |
| static const int opps_div[] __initconst = {1, 2, 3, 4}; |
| |
| static struct platform_device *armada_8k_pdev; |
| |
| struct freq_table { |
| struct device *cpu_dev; |
| unsigned int freq[ARRAY_SIZE(opps_div)]; |
| }; |
| |
| /* If the CPUs share the same clock, then they are in the same cluster. */ |
| static void __init armada_8k_get_sharing_cpus(struct clk *cur_clk, |
| struct cpumask *cpumask) |
| { |
| int cpu; |
| |
| for_each_possible_cpu(cpu) { |
| struct device *cpu_dev; |
| struct clk *clk; |
| |
| cpu_dev = get_cpu_device(cpu); |
| if (!cpu_dev) { |
| pr_warn("Failed to get cpu%d device\n", cpu); |
| continue; |
| } |
| |
| clk = clk_get(cpu_dev, 0); |
| if (IS_ERR(clk)) { |
| pr_warn("Cannot get clock for CPU %d\n", cpu); |
| } else { |
| if (clk_is_match(clk, cur_clk)) |
| cpumask_set_cpu(cpu, cpumask); |
| |
| clk_put(clk); |
| } |
| } |
| } |
| |
| static int __init armada_8k_add_opp(struct clk *clk, struct device *cpu_dev, |
| struct freq_table *freq_tables, |
| int opps_index) |
| { |
| unsigned int cur_frequency; |
| unsigned int freq; |
| int i, ret; |
| |
| /* Get nominal (current) CPU frequency. */ |
| cur_frequency = clk_get_rate(clk); |
| if (!cur_frequency) { |
| dev_err(cpu_dev, "Failed to get clock rate for this CPU\n"); |
| return -EINVAL; |
| } |
| |
| freq_tables[opps_index].cpu_dev = cpu_dev; |
| |
| for (i = 0; i < ARRAY_SIZE(opps_div); i++) { |
| freq = cur_frequency / opps_div[i]; |
| |
| ret = dev_pm_opp_add(cpu_dev, freq, 0); |
| if (ret) |
| return ret; |
| |
| freq_tables[opps_index].freq[i] = freq; |
| } |
| |
| return 0; |
| } |
| |
| static void armada_8k_cpufreq_free_table(struct freq_table *freq_tables) |
| { |
| int opps_index, nb_cpus = num_possible_cpus(); |
| |
| for (opps_index = 0 ; opps_index <= nb_cpus; opps_index++) { |
| int i; |
| |
| /* If cpu_dev is NULL then we reached the end of the array */ |
| if (!freq_tables[opps_index].cpu_dev) |
| break; |
| |
| for (i = 0; i < ARRAY_SIZE(opps_div); i++) { |
| /* |
| * A 0Hz frequency is not valid, this meant |
| * that it was not yet initialized so there is |
| * no more opp to free |
| */ |
| if (freq_tables[opps_index].freq[i] == 0) |
| break; |
| |
| dev_pm_opp_remove(freq_tables[opps_index].cpu_dev, |
| freq_tables[opps_index].freq[i]); |
| } |
| } |
| |
| kfree(freq_tables); |
| } |
| |
| static int __init armada_8k_cpufreq_init(void) |
| { |
| int ret = 0, opps_index = 0, cpu, nb_cpus; |
| struct freq_table *freq_tables; |
| struct device_node *node; |
| struct cpumask cpus; |
| |
| node = of_find_compatible_node(NULL, NULL, "marvell,ap806-cpu-clock"); |
| if (!node || !of_device_is_available(node)) { |
| of_node_put(node); |
| return -ENODEV; |
| } |
| |
| nb_cpus = num_possible_cpus(); |
| freq_tables = kcalloc(nb_cpus, sizeof(*freq_tables), GFP_KERNEL); |
| cpumask_copy(&cpus, cpu_possible_mask); |
| |
| /* |
| * For each CPU, this loop registers the operating points |
| * supported (which are the nominal CPU frequency and full integer |
| * divisions of it). |
| */ |
| for_each_cpu(cpu, &cpus) { |
| struct cpumask shared_cpus; |
| struct device *cpu_dev; |
| struct clk *clk; |
| |
| cpu_dev = get_cpu_device(cpu); |
| |
| if (!cpu_dev) { |
| pr_err("Cannot get CPU %d\n", cpu); |
| continue; |
| } |
| |
| clk = clk_get(cpu_dev, 0); |
| |
| if (IS_ERR(clk)) { |
| pr_err("Cannot get clock for CPU %d\n", cpu); |
| ret = PTR_ERR(clk); |
| goto remove_opp; |
| } |
| |
| ret = armada_8k_add_opp(clk, cpu_dev, freq_tables, opps_index); |
| if (ret) { |
| clk_put(clk); |
| goto remove_opp; |
| } |
| |
| opps_index++; |
| cpumask_clear(&shared_cpus); |
| armada_8k_get_sharing_cpus(clk, &shared_cpus); |
| dev_pm_opp_set_sharing_cpus(cpu_dev, &shared_cpus); |
| cpumask_andnot(&cpus, &cpus, &shared_cpus); |
| clk_put(clk); |
| } |
| |
| armada_8k_pdev = platform_device_register_simple("cpufreq-dt", -1, |
| NULL, 0); |
| ret = PTR_ERR_OR_ZERO(armada_8k_pdev); |
| if (ret) |
| goto remove_opp; |
| |
| platform_set_drvdata(armada_8k_pdev, freq_tables); |
| |
| return 0; |
| |
| remove_opp: |
| armada_8k_cpufreq_free_table(freq_tables); |
| return ret; |
| } |
| module_init(armada_8k_cpufreq_init); |
| |
| static void __exit armada_8k_cpufreq_exit(void) |
| { |
| struct freq_table *freq_tables = platform_get_drvdata(armada_8k_pdev); |
| |
| platform_device_unregister(armada_8k_pdev); |
| armada_8k_cpufreq_free_table(freq_tables); |
| } |
| module_exit(armada_8k_cpufreq_exit); |
| |
| MODULE_AUTHOR("Gregory Clement <gregory.clement@bootlin.com>"); |
| MODULE_DESCRIPTION("Armada 8K cpufreq driver"); |
| MODULE_LICENSE("GPL"); |