| ------------------------------------------------------------------------------ |
| README file for the PCBIT-D Device Driver. |
| ------------------------------------------------------------------------------ |
| |
| The PCBIT is a Euro ISDN adapter manufactured in Portugal by Octal and |
| developed in cooperation with Portugal Telecom and Inesc. |
| The driver interfaces with the standard kernel isdn facilities |
| originally developed by Fritz Elfert in the isdn4linux project. |
| |
| The common versions of the pcbit board require a firmware that is |
| distributed (and copyrighted) by the manufacturer. To load this |
| firmware you need "pcbitctl" available on the standard isdn4k-utils |
| package or in the pcbit package available in: |
| |
| ftp://ftp.di.fc.ul.pt/pub/systems/Linux/isdn |
| |
| Known Limitations: |
| |
| - The board reset procedure is at the moment incorrect and will only |
| allow you to load the firmware after a hard reset. |
| |
| - Only HDLC in B-channels is supported at the moment. There is no |
| current support for X.25 in B or D channels nor LAPD in B |
| channels. The main reason is that these two other protocol modes have, |
| to my knowledge, very little use. If you want to see them implemented |
| *do* send me a mail. |
| |
| - The driver often triggers errors in the board that I and the |
| manufacturer believe to be caused by bugs in the firmware. The current |
| version includes several procedures for error recovery that should |
| allow normal operation. Plans for the future include cooperation with |
| the manufacturer in order to solve this problem. |
| |
| Information/hints/help can be obtained in the linux isdn |
| mailing list (isdn4linux@listserv.isdn4linux.de) or directly from me. |
| |
| regards, |
| Pedro. |
| |
| <roque@di.fc.ul.pt> |
