| /* |
| * arch/arm/mach-spear13xx/spear13xx.c |
| * |
| * SPEAr13XX machines common source file |
| * |
| * Copyright (C) 2012 ST Microelectronics |
| * Viresh Kumar <viresh.linux@gmail.com> |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #define pr_fmt(fmt) "SPEAr13xx: " fmt |
| |
| #include <linux/amba/pl022.h> |
| #include <linux/clk.h> |
| #include <linux/dw_dmac.h> |
| #include <linux/err.h> |
| #include <linux/of_irq.h> |
| #include <asm/hardware/cache-l2x0.h> |
| #include <asm/hardware/gic.h> |
| #include <asm/mach/map.h> |
| #include <asm/smp_twd.h> |
| #include <mach/dma.h> |
| #include <mach/generic.h> |
| #include <mach/spear.h> |
| |
| /* common dw_dma filter routine to be used by peripherals */ |
| bool dw_dma_filter(struct dma_chan *chan, void *slave) |
| { |
| struct dw_dma_slave *dws = (struct dw_dma_slave *)slave; |
| |
| if (chan->device->dev == dws->dma_dev) { |
| chan->private = slave; |
| return true; |
| } else { |
| return false; |
| } |
| } |
| |
| /* ssp device registration */ |
| static struct dw_dma_slave ssp_dma_param[] = { |
| { |
| /* Tx */ |
| .cfg_hi = DWC_CFGH_DST_PER(DMA_REQ_SSP0_TX), |
| .cfg_lo = 0, |
| .src_master = DMA_MASTER_MEMORY, |
| .dst_master = DMA_MASTER_SSP0, |
| }, { |
| /* Rx */ |
| .cfg_hi = DWC_CFGH_SRC_PER(DMA_REQ_SSP0_RX), |
| .cfg_lo = 0, |
| .src_master = DMA_MASTER_SSP0, |
| .dst_master = DMA_MASTER_MEMORY, |
| } |
| }; |
| |
| struct pl022_ssp_controller pl022_plat_data = { |
| .bus_id = 0, |
| .enable_dma = 1, |
| .dma_filter = dw_dma_filter, |
| .dma_rx_param = &ssp_dma_param[1], |
| .dma_tx_param = &ssp_dma_param[0], |
| .num_chipselect = 3, |
| }; |
| |
| /* CF device registration */ |
| struct dw_dma_slave cf_dma_priv = { |
| .cfg_hi = 0, |
| .cfg_lo = 0, |
| .src_master = 0, |
| .dst_master = 0, |
| }; |
| |
| /* dmac device registeration */ |
| struct dw_dma_platform_data dmac_plat_data = { |
| .nr_channels = 8, |
| .chan_allocation_order = CHAN_ALLOCATION_DESCENDING, |
| .chan_priority = CHAN_PRIORITY_DESCENDING, |
| }; |
| |
| void __init spear13xx_l2x0_init(void) |
| { |
| /* |
| * 512KB (64KB/way), 8-way associativity, parity supported |
| * |
| * FIXME: 9th bit, of Auxillary Controller register must be set |
| * for some spear13xx devices for stable L2 operation. |
| * |
| * Enable Early BRESP, L2 prefetch for Instruction and Data, |
| * write alloc and 'Full line of zero' options |
| * |
| */ |
| |
| writel_relaxed(0x06, VA_L2CC_BASE + L2X0_PREFETCH_CTRL); |
| |
| /* |
| * Program following latencies in order to make |
| * SPEAr1340 work at 600 MHz |
| */ |
| writel_relaxed(0x221, VA_L2CC_BASE + L2X0_TAG_LATENCY_CTRL); |
| writel_relaxed(0x441, VA_L2CC_BASE + L2X0_DATA_LATENCY_CTRL); |
| l2x0_init(VA_L2CC_BASE, 0x70A60001, 0xfe00ffff); |
| } |
| |
| /* |
| * Following will create 16MB static virtual/physical mappings |
| * PHYSICAL VIRTUAL |
| * 0xB3000000 0xFE000000 |
| * 0xE0000000 0xFD000000 |
| * 0xEC000000 0xFC000000 |
| * 0xED000000 0xFB000000 |
| */ |
| struct map_desc spear13xx_io_desc[] __initdata = { |
| { |
| .virtual = (unsigned long)VA_PERIP_GRP2_BASE, |
| .pfn = __phys_to_pfn(PERIP_GRP2_BASE), |
| .length = SZ_16M, |
| .type = MT_DEVICE |
| }, { |
| .virtual = (unsigned long)VA_PERIP_GRP1_BASE, |
| .pfn = __phys_to_pfn(PERIP_GRP1_BASE), |
| .length = SZ_16M, |
| .type = MT_DEVICE |
| }, { |
| .virtual = (unsigned long)VA_A9SM_AND_MPMC_BASE, |
| .pfn = __phys_to_pfn(A9SM_AND_MPMC_BASE), |
| .length = SZ_16M, |
| .type = MT_DEVICE |
| }, { |
| .virtual = (unsigned long)VA_L2CC_BASE, |
| .pfn = __phys_to_pfn(L2CC_BASE), |
| .length = SZ_4K, |
| .type = MT_DEVICE |
| }, |
| }; |
| |
| /* This will create static memory mapping for selected devices */ |
| void __init spear13xx_map_io(void) |
| { |
| iotable_init(spear13xx_io_desc, ARRAY_SIZE(spear13xx_io_desc)); |
| } |
| |
| static void __init spear13xx_clk_init(void) |
| { |
| if (of_machine_is_compatible("st,spear1310")) |
| spear1310_clk_init(); |
| else if (of_machine_is_compatible("st,spear1340")) |
| spear1340_clk_init(); |
| else |
| pr_err("%s: Unknown machine\n", __func__); |
| } |
| |
| static void __init spear13xx_timer_init(void) |
| { |
| char pclk_name[] = "osc_24m_clk"; |
| struct clk *gpt_clk, *pclk; |
| |
| spear13xx_clk_init(); |
| |
| /* get the system timer clock */ |
| gpt_clk = clk_get_sys("gpt0", NULL); |
| if (IS_ERR(gpt_clk)) { |
| pr_err("%s:couldn't get clk for gpt\n", __func__); |
| BUG(); |
| } |
| |
| /* get the suitable parent clock for timer*/ |
| pclk = clk_get(NULL, pclk_name); |
| if (IS_ERR(pclk)) { |
| pr_err("%s:couldn't get %s as parent for gpt\n", __func__, |
| pclk_name); |
| BUG(); |
| } |
| |
| clk_set_parent(gpt_clk, pclk); |
| clk_put(gpt_clk); |
| clk_put(pclk); |
| |
| spear_setup_of_timer(); |
| twd_local_timer_of_register(); |
| } |
| |
| struct sys_timer spear13xx_timer = { |
| .init = spear13xx_timer_init, |
| }; |
| |
| static const struct of_device_id gic_of_match[] __initconst = { |
| { .compatible = "arm,cortex-a9-gic", .data = gic_of_init }, |
| { /* Sentinel */ } |
| }; |
| |
| void __init spear13xx_dt_init_irq(void) |
| { |
| of_irq_init(gic_of_match); |
| } |