| /* |
| * Device management routines |
| * Copyright (c) by Jaroslav Kysela <perex@suse.cz> |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| */ |
| |
| #include <sound/driver.h> |
| #include <linux/slab.h> |
| #include <linux/time.h> |
| #include <linux/errno.h> |
| #include <sound/core.h> |
| |
| /** |
| * snd_device_new - create an ALSA device component |
| * @card: the card instance |
| * @type: the device type, SNDRV_DEV_XXX |
| * @device_data: the data pointer of this device |
| * @ops: the operator table |
| * |
| * Creates a new device component for the given data pointer. |
| * The device will be assigned to the card and managed together |
| * by the card. |
| * |
| * The data pointer plays a role as the identifier, too, so the |
| * pointer address must be unique and unchanged. |
| * |
| * Returns zero if successful, or a negative error code on failure. |
| */ |
| int snd_device_new(struct snd_card *card, snd_device_type_t type, |
| void *device_data, struct snd_device_ops *ops) |
| { |
| struct snd_device *dev; |
| |
| snd_assert(card != NULL, return -ENXIO); |
| snd_assert(device_data != NULL, return -ENXIO); |
| snd_assert(ops != NULL, return -ENXIO); |
| dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
| if (dev == NULL) |
| return -ENOMEM; |
| dev->card = card; |
| dev->type = type; |
| dev->state = SNDRV_DEV_BUILD; |
| dev->device_data = device_data; |
| dev->ops = ops; |
| list_add(&dev->list, &card->devices); /* add to the head of list */ |
| return 0; |
| } |
| |
| /** |
| * snd_device_free - release the device from the card |
| * @card: the card instance |
| * @device_data: the data pointer to release |
| * |
| * Removes the device from the list on the card and invokes the |
| * callback, dev_unregister or dev_free, corresponding to the state. |
| * Then release the device. |
| * |
| * Returns zero if successful, or a negative error code on failure or if the |
| * device not found. |
| */ |
| int snd_device_free(struct snd_card *card, void *device_data) |
| { |
| struct list_head *list; |
| struct snd_device *dev; |
| |
| snd_assert(card != NULL, return -ENXIO); |
| snd_assert(device_data != NULL, return -ENXIO); |
| list_for_each(list, &card->devices) { |
| dev = snd_device(list); |
| if (dev->device_data != device_data) |
| continue; |
| /* unlink */ |
| list_del(&dev->list); |
| if ((dev->state == SNDRV_DEV_REGISTERED || |
| dev->state == SNDRV_DEV_DISCONNECTED) && |
| dev->ops->dev_unregister) { |
| if (dev->ops->dev_unregister(dev)) |
| snd_printk(KERN_ERR "device unregister failure\n"); |
| } else { |
| if (dev->ops->dev_free) { |
| if (dev->ops->dev_free(dev)) |
| snd_printk(KERN_ERR "device free failure\n"); |
| } |
| } |
| kfree(dev); |
| return 0; |
| } |
| snd_printd("device free %p (from %p), not found\n", device_data, |
| __builtin_return_address(0)); |
| return -ENXIO; |
| } |
| |
| /** |
| * snd_device_disconnect - disconnect the device |
| * @card: the card instance |
| * @device_data: the data pointer to disconnect |
| * |
| * Turns the device into the disconnection state, invoking |
| * dev_disconnect callback, if the device was already registered. |
| * |
| * Usually called from snd_card_disconnect(). |
| * |
| * Returns zero if successful, or a negative error code on failure or if the |
| * device not found. |
| */ |
| int snd_device_disconnect(struct snd_card *card, void *device_data) |
| { |
| struct list_head *list; |
| struct snd_device *dev; |
| |
| snd_assert(card != NULL, return -ENXIO); |
| snd_assert(device_data != NULL, return -ENXIO); |
| list_for_each(list, &card->devices) { |
| dev = snd_device(list); |
| if (dev->device_data != device_data) |
| continue; |
| if (dev->state == SNDRV_DEV_REGISTERED && |
| dev->ops->dev_disconnect) { |
| if (dev->ops->dev_disconnect(dev)) |
| snd_printk(KERN_ERR "device disconnect failure\n"); |
| dev->state = SNDRV_DEV_DISCONNECTED; |
| } |
| return 0; |
| } |
| snd_printd("device disconnect %p (from %p), not found\n", device_data, |
| __builtin_return_address(0)); |
| return -ENXIO; |
| } |
| |
| /** |
| * snd_device_register - register the device |
| * @card: the card instance |
| * @device_data: the data pointer to register |
| * |
| * Registers the device which was already created via |
| * snd_device_new(). Usually this is called from snd_card_register(), |
| * but it can be called later if any new devices are created after |
| * invocation of snd_card_register(). |
| * |
| * Returns zero if successful, or a negative error code on failure or if the |
| * device not found. |
| */ |
| int snd_device_register(struct snd_card *card, void *device_data) |
| { |
| struct list_head *list; |
| struct snd_device *dev; |
| int err; |
| |
| snd_assert(card != NULL, return -ENXIO); |
| snd_assert(device_data != NULL, return -ENXIO); |
| list_for_each(list, &card->devices) { |
| dev = snd_device(list); |
| if (dev->device_data != device_data) |
| continue; |
| if (dev->state == SNDRV_DEV_BUILD && dev->ops->dev_register) { |
| if ((err = dev->ops->dev_register(dev)) < 0) |
| return err; |
| dev->state = SNDRV_DEV_REGISTERED; |
| return 0; |
| } |
| return -EBUSY; |
| } |
| snd_BUG(); |
| return -ENXIO; |
| } |
| |
| /* |
| * register all the devices on the card. |
| * called from init.c |
| */ |
| int snd_device_register_all(struct snd_card *card) |
| { |
| struct list_head *list; |
| struct snd_device *dev; |
| int err; |
| |
| snd_assert(card != NULL, return -ENXIO); |
| list_for_each(list, &card->devices) { |
| dev = snd_device(list); |
| if (dev->state == SNDRV_DEV_BUILD && dev->ops->dev_register) { |
| if ((err = dev->ops->dev_register(dev)) < 0) |
| return err; |
| dev->state = SNDRV_DEV_REGISTERED; |
| } |
| } |
| return 0; |
| } |
| |
| /* |
| * disconnect all the devices on the card. |
| * called from init.c |
| */ |
| int snd_device_disconnect_all(struct snd_card *card) |
| { |
| struct snd_device *dev; |
| struct list_head *list; |
| int err = 0; |
| |
| snd_assert(card != NULL, return -ENXIO); |
| list_for_each(list, &card->devices) { |
| dev = snd_device(list); |
| if (snd_device_disconnect(card, dev->device_data) < 0) |
| err = -ENXIO; |
| } |
| return err; |
| } |
| |
| /* |
| * release all the devices on the card. |
| * called from init.c |
| */ |
| int snd_device_free_all(struct snd_card *card, snd_device_cmd_t cmd) |
| { |
| struct snd_device *dev; |
| struct list_head *list; |
| int err; |
| unsigned int range_low, range_high; |
| |
| snd_assert(card != NULL, return -ENXIO); |
| range_low = cmd * SNDRV_DEV_TYPE_RANGE_SIZE; |
| range_high = range_low + SNDRV_DEV_TYPE_RANGE_SIZE - 1; |
| __again: |
| list_for_each(list, &card->devices) { |
| dev = snd_device(list); |
| if (dev->type >= range_low && dev->type <= range_high) { |
| if ((err = snd_device_free(card, dev->device_data)) < 0) |
| return err; |
| goto __again; |
| } |
| } |
| return 0; |
| } |