| // SPDX-License-Identifier: GPL-2.0 |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/mfd/max77620.h> |
| |
| / { |
| i2c@7000d000 { |
| pmic: pmic@3c { |
| compatible = "maxim,max77663"; |
| reg = <0x3c>; |
| |
| interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| #interrupt-cells = <2>; |
| interrupt-controller; |
| |
| #gpio-cells = <2>; |
| gpio-controller; |
| |
| system-power-controller; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&max77620_default>; |
| |
| cpu-pwr-req-hog { |
| gpio-hog; |
| gpios = <6 GPIO_ACTIVE_HIGH>; |
| input; |
| }; |
| |
| fps { |
| fps0 { |
| maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; |
| }; |
| |
| fps1 { |
| maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>; |
| }; |
| |
| fps2 { |
| maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; |
| }; |
| }; |
| |
| max77620_default: pinmux { |
| gpio4 { |
| pins = "gpio4"; |
| function = "32k-out1"; |
| }; |
| }; |
| |
| regulators { |
| in-sd0-supply = <&vdd_5v0_sys>; |
| in-sd1-supply = <&vdd_5v0_sys>; |
| in-sd2-supply = <&vdd_5v0_sys>; |
| in-sd3-supply = <&vdd_5v0_sys>; |
| in-sd4-supply = <&vdd_5v0_sys>; |
| |
| in-ldo0-1-supply = <&vdd_1v35>; |
| in-ldo2-supply = <&vdd_3v3_sys>; |
| in-ldo3-5-supply = <&vdd_3v3_sys>; |
| in-ldo4-6-supply = <&vdd_5v0_sys>; |
| in-ldo7-8-supply = <&vdd_1v35>; |
| |
| vdd_cpu: sd0 { |
| regulator-name = "vdd_cpu"; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1250000>; |
| regulator-coupled-with = <&vdd_core>; |
| regulator-coupled-max-spread = <300000>; |
| regulator-max-step-microvolt = <100000>; |
| regulator-always-on; |
| regulator-boot-on; |
| |
| nvidia,tegra-cpu-regulator; |
| }; |
| |
| vdd_core: sd1 { |
| regulator-name = "vdd_core"; |
| regulator-min-microvolt = <950000>; |
| regulator-max-microvolt = <1350000>; |
| regulator-coupled-with = <&vdd_cpu>; |
| regulator-coupled-max-spread = <300000>; |
| regulator-max-step-microvolt = <100000>; |
| regulator-always-on; |
| regulator-boot-on; |
| |
| nvidia,tegra-core-regulator; |
| }; |
| |
| vdd_1v8: sd2 { |
| regulator-name = "vdd_gen1v8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| vdd_1v35: sd3 { |
| regulator-name = "vdd_ddr3l_1v35"; |
| regulator-min-microvolt = <1350000>; |
| regulator-max-microvolt = <1350000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| ldo0 { |
| regulator-name = "vdd_ddr_hs"; |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <1000000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| ldo2 { |
| regulator-name = "vdd_ddr_rx"; |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <2800000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| vcore_emmc: ldo3 { |
| regulator-name = "vcore_emmc"; |
| regulator-min-microvolt = <2850000>; |
| regulator-max-microvolt = <3100000>; |
| regulator-always-on; |
| }; |
| |
| ldo4 { |
| regulator-name = "vdd_rtc"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| ldo5 { |
| regulator-name = "vdd_camera"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| ldo6 { |
| regulator-name = "vddio_sdmmc"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| ldo7 { |
| regulator-name = "avdd_dsi_csi"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| }; |
| |
| ldo8 { |
| regulator-name = "avdd_pll"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| }; |
| }; |
| }; |
| |
| vdd_3v3_sys: regulator-3v3 { |
| gpio = <&pmic 3 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| regulator-usb { |
| compatible = "regulator-fixed"; |
| regulator-name = "avdd_usb"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| regulator-boot-on; |
| gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| vin-supply = <&vdd_3v3_sys>; |
| }; |
| |
| pmc@7000e400 { |
| i2c-thermtrip { |
| nvidia,i2c-controller-id = <4>; |
| nvidia,bus-addr = <0x3c>; |
| nvidia,reg-addr = <0x41>; |
| nvidia,reg-data = <0xe0>; |
| }; |
| }; |
| }; |