| // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| /* |
| * Device Tree Source for the White Hawk CSI/DSI sub-board |
| * |
| * Copyright (C) 2022 Glider bv |
| */ |
| |
| #include <dt-bindings/media/video-interfaces.h> |
| |
| &csi40 { |
| status = "okay"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| csi40_in: endpoint { |
| bus-type = <MEDIA_BUS_TYPE_CSI2_CPHY>; |
| clock-lanes = <0>; |
| data-lanes = <1 2 3>; |
| remote-endpoint = <&max96712_out0>; |
| }; |
| }; |
| }; |
| }; |
| |
| &csi41 { |
| status = "okay"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| csi41_in: endpoint { |
| bus-type = <MEDIA_BUS_TYPE_CSI2_CPHY>; |
| clock-lanes = <0>; |
| data-lanes = <1 2 3>; |
| remote-endpoint = <&max96712_out1>; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c0 { |
| pca9654_a: gpio@21 { |
| compatible = "onnn,pca9654"; |
| reg = <0x21>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| pca9654_b: gpio@22 { |
| compatible = "onnn,pca9654"; |
| reg = <0x22>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| eeprom@52 { |
| compatible = "rohm,br24g01", "atmel,24c01"; |
| label = "csi-dsi-sub-board-id"; |
| reg = <0x52>; |
| pagesize = <8>; |
| }; |
| }; |
| |
| &i2c1 { |
| gmsl0: gmsl-deserializer@49 { |
| compatible = "maxim,max96712"; |
| reg = <0x49>; |
| enable-gpios = <&pca9654_a 0 GPIO_ACTIVE_HIGH>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@4 { |
| reg = <4>; |
| max96712_out0: endpoint { |
| bus-type = <MEDIA_BUS_TYPE_CSI2_CPHY>; |
| clock-lanes = <0>; |
| data-lanes = <1 2 3>; |
| remote-endpoint = <&csi40_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| gmsl1: gmsl-deserializer@4b { |
| compatible = "maxim,max96712"; |
| reg = <0x4b>; |
| enable-gpios = <&pca9654_b 0 GPIO_ACTIVE_HIGH>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@4 { |
| reg = <4>; |
| max96712_out1: endpoint { |
| bus-type = <MEDIA_BUS_TYPE_CSI2_CPHY>; |
| clock-lanes = <0>; |
| data-lanes = <1 2 3>; |
| remote-endpoint = <&csi41_in>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| &isp0 { |
| status = "okay"; |
| }; |
| |
| &isp1 { |
| status = "okay"; |
| }; |
| |
| &vin00 { |
| status = "okay"; |
| }; |
| |
| &vin01 { |
| status = "okay"; |
| }; |
| |
| &vin02 { |
| status = "okay"; |
| }; |
| |
| &vin03 { |
| status = "okay"; |
| }; |
| |
| &vin04 { |
| status = "okay"; |
| }; |
| |
| &vin05 { |
| status = "okay"; |
| }; |
| |
| &vin06 { |
| status = "okay"; |
| }; |
| |
| &vin07 { |
| status = "okay"; |
| }; |
| |
| &vin08 { |
| status = "okay"; |
| }; |
| |
| &vin09 { |
| status = "okay"; |
| }; |
| |
| &vin10 { |
| status = "okay"; |
| }; |
| |
| &vin11 { |
| status = "okay"; |
| }; |
| |
| &vin12 { |
| status = "okay"; |
| }; |
| |
| &vin13 { |
| status = "okay"; |
| }; |
| |
| &vin14 { |
| status = "okay"; |
| }; |
| |
| &vin15 { |
| status = "okay"; |
| }; |