| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * linux/arch/arm/kernel/module.c |
| * |
| * Copyright (C) 2002 Russell King. |
| * Modified for nommu by Hyok S. Choi |
| * |
| * Module allocation method suggested by Andi Kleen. |
| */ |
| #include <linux/module.h> |
| #include <linux/moduleloader.h> |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/elf.h> |
| #include <linux/fs.h> |
| #include <linux/string.h> |
| |
| #include <asm/sections.h> |
| #include <asm/smp_plat.h> |
| #include <asm/unwind.h> |
| #include <asm/opcodes.h> |
| |
| bool module_init_section(const char *name) |
| { |
| return strstarts(name, ".init") || |
| strstarts(name, ".ARM.extab.init") || |
| strstarts(name, ".ARM.exidx.init"); |
| } |
| |
| bool module_exit_section(const char *name) |
| { |
| return strstarts(name, ".exit") || |
| strstarts(name, ".ARM.extab.exit") || |
| strstarts(name, ".ARM.exidx.exit"); |
| } |
| |
| #ifdef CONFIG_ARM_HAS_GROUP_RELOCS |
| /* |
| * This implements the partitioning algorithm for group relocations as |
| * documented in the ARM AArch32 ELF psABI (IHI 0044). |
| * |
| * A single PC-relative symbol reference is divided in up to 3 add or subtract |
| * operations, where the final one could be incorporated into a load/store |
| * instruction with immediate offset. E.g., |
| * |
| * ADD Rd, PC, #... or ADD Rd, PC, #... |
| * ADD Rd, Rd, #... ADD Rd, Rd, #... |
| * LDR Rd, [Rd, #...] ADD Rd, Rd, #... |
| * |
| * The latter has a guaranteed range of only 16 MiB (3x8 == 24 bits), so it is |
| * of limited use in the kernel. However, the ADD/ADD/LDR combo has a range of |
| * -/+ 256 MiB, (2x8 + 12 == 28 bits), which means it has sufficient range for |
| * any in-kernel symbol reference (unless module PLTs are being used). |
| * |
| * The main advantage of this approach over the typical pattern using a literal |
| * load is that literal loads may miss in the D-cache, and generally lead to |
| * lower cache efficiency for variables that are referenced often from many |
| * different places in the code. |
| */ |
| static u32 get_group_rem(u32 group, u32 *offset) |
| { |
| u32 val = *offset; |
| u32 shift; |
| do { |
| shift = val ? (31 - __fls(val)) & ~1 : 32; |
| *offset = val; |
| if (!val) |
| break; |
| val &= 0xffffff >> shift; |
| } while (group--); |
| return shift; |
| } |
| #endif |
| |
| int |
| apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, |
| unsigned int relindex, struct module *module) |
| { |
| Elf32_Shdr *symsec = sechdrs + symindex; |
| Elf32_Shdr *relsec = sechdrs + relindex; |
| Elf32_Shdr *dstsec = sechdrs + relsec->sh_info; |
| Elf32_Rel *rel = (void *)relsec->sh_addr; |
| unsigned int i; |
| |
| for (i = 0; i < relsec->sh_size / sizeof(Elf32_Rel); i++, rel++) { |
| unsigned long loc; |
| Elf32_Sym *sym; |
| const char *symname; |
| #ifdef CONFIG_ARM_HAS_GROUP_RELOCS |
| u32 shift, group = 1; |
| #endif |
| s32 offset; |
| u32 tmp; |
| #ifdef CONFIG_THUMB2_KERNEL |
| u32 upper, lower, sign, j1, j2; |
| #endif |
| |
| offset = ELF32_R_SYM(rel->r_info); |
| if (offset < 0 || offset > (symsec->sh_size / sizeof(Elf32_Sym))) { |
| pr_err("%s: section %u reloc %u: bad relocation sym offset\n", |
| module->name, relindex, i); |
| return -ENOEXEC; |
| } |
| |
| sym = ((Elf32_Sym *)symsec->sh_addr) + offset; |
| symname = strtab + sym->st_name; |
| |
| if (rel->r_offset < 0 || rel->r_offset > dstsec->sh_size - sizeof(u32)) { |
| pr_err("%s: section %u reloc %u sym '%s': out of bounds relocation, offset %d size %u\n", |
| module->name, relindex, i, symname, |
| rel->r_offset, dstsec->sh_size); |
| return -ENOEXEC; |
| } |
| |
| loc = dstsec->sh_addr + rel->r_offset; |
| |
| switch (ELF32_R_TYPE(rel->r_info)) { |
| case R_ARM_NONE: |
| /* ignore */ |
| break; |
| |
| case R_ARM_ABS32: |
| case R_ARM_TARGET1: |
| *(u32 *)loc += sym->st_value; |
| break; |
| |
| case R_ARM_PC24: |
| case R_ARM_CALL: |
| case R_ARM_JUMP24: |
| if (sym->st_value & 3) { |
| pr_err("%s: section %u reloc %u sym '%s': unsupported interworking call (ARM -> Thumb)\n", |
| module->name, relindex, i, symname); |
| return -ENOEXEC; |
| } |
| |
| offset = __mem_to_opcode_arm(*(u32 *)loc); |
| offset = (offset & 0x00ffffff) << 2; |
| offset = sign_extend32(offset, 25); |
| |
| offset += sym->st_value - loc; |
| |
| /* |
| * Route through a PLT entry if 'offset' exceeds the |
| * supported range. Note that 'offset + loc + 8' |
| * contains the absolute jump target, i.e., |
| * @sym + addend, corrected for the +8 PC bias. |
| */ |
| if (IS_ENABLED(CONFIG_ARM_MODULE_PLTS) && |
| (offset <= (s32)0xfe000000 || |
| offset >= (s32)0x02000000)) |
| offset = get_module_plt(module, loc, |
| offset + loc + 8) |
| - loc - 8; |
| |
| if (offset <= (s32)0xfe000000 || |
| offset >= (s32)0x02000000) { |
| pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n", |
| module->name, relindex, i, symname, |
| ELF32_R_TYPE(rel->r_info), loc, |
| sym->st_value); |
| return -ENOEXEC; |
| } |
| |
| offset >>= 2; |
| offset &= 0x00ffffff; |
| |
| *(u32 *)loc &= __opcode_to_mem_arm(0xff000000); |
| *(u32 *)loc |= __opcode_to_mem_arm(offset); |
| break; |
| |
| case R_ARM_V4BX: |
| /* Preserve Rm and the condition code. Alter |
| * other bits to re-code instruction as |
| * MOV PC,Rm. |
| */ |
| *(u32 *)loc &= __opcode_to_mem_arm(0xf000000f); |
| *(u32 *)loc |= __opcode_to_mem_arm(0x01a0f000); |
| break; |
| |
| case R_ARM_PREL31: |
| offset = (*(s32 *)loc << 1) >> 1; /* sign extend */ |
| offset += sym->st_value - loc; |
| if (offset >= 0x40000000 || offset < -0x40000000) { |
| pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n", |
| module->name, relindex, i, symname, |
| ELF32_R_TYPE(rel->r_info), loc, |
| sym->st_value); |
| return -ENOEXEC; |
| } |
| *(u32 *)loc &= 0x80000000; |
| *(u32 *)loc |= offset & 0x7fffffff; |
| break; |
| |
| case R_ARM_REL32: |
| *(u32 *)loc += sym->st_value - loc; |
| break; |
| |
| case R_ARM_MOVW_ABS_NC: |
| case R_ARM_MOVT_ABS: |
| case R_ARM_MOVW_PREL_NC: |
| case R_ARM_MOVT_PREL: |
| offset = tmp = __mem_to_opcode_arm(*(u32 *)loc); |
| offset = ((offset & 0xf0000) >> 4) | (offset & 0xfff); |
| offset = sign_extend32(offset, 15); |
| |
| offset += sym->st_value; |
| if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_PREL || |
| ELF32_R_TYPE(rel->r_info) == R_ARM_MOVW_PREL_NC) |
| offset -= loc; |
| if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_ABS || |
| ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_PREL) |
| offset >>= 16; |
| |
| tmp &= 0xfff0f000; |
| tmp |= ((offset & 0xf000) << 4) | |
| (offset & 0x0fff); |
| |
| *(u32 *)loc = __opcode_to_mem_arm(tmp); |
| break; |
| |
| #ifdef CONFIG_ARM_HAS_GROUP_RELOCS |
| case R_ARM_ALU_PC_G0_NC: |
| group = 0; |
| fallthrough; |
| case R_ARM_ALU_PC_G1_NC: |
| tmp = __mem_to_opcode_arm(*(u32 *)loc); |
| offset = ror32(tmp & 0xff, (tmp & 0xf00) >> 7); |
| if (tmp & BIT(22)) |
| offset = -offset; |
| offset += sym->st_value - loc; |
| if (offset < 0) { |
| offset = -offset; |
| tmp = (tmp & ~BIT(23)) | BIT(22); // SUB opcode |
| } else { |
| tmp = (tmp & ~BIT(22)) | BIT(23); // ADD opcode |
| } |
| |
| shift = get_group_rem(group, &offset); |
| if (shift < 24) { |
| offset >>= 24 - shift; |
| offset |= (shift + 8) << 7; |
| } |
| *(u32 *)loc = __opcode_to_mem_arm((tmp & ~0xfff) | offset); |
| break; |
| |
| case R_ARM_LDR_PC_G2: |
| tmp = __mem_to_opcode_arm(*(u32 *)loc); |
| offset = tmp & 0xfff; |
| if (~tmp & BIT(23)) // U bit cleared? |
| offset = -offset; |
| offset += sym->st_value - loc; |
| if (offset < 0) { |
| offset = -offset; |
| tmp &= ~BIT(23); // clear U bit |
| } else { |
| tmp |= BIT(23); // set U bit |
| } |
| get_group_rem(2, &offset); |
| |
| if (offset > 0xfff) { |
| pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n", |
| module->name, relindex, i, symname, |
| ELF32_R_TYPE(rel->r_info), loc, |
| sym->st_value); |
| return -ENOEXEC; |
| } |
| *(u32 *)loc = __opcode_to_mem_arm((tmp & ~0xfff) | offset); |
| break; |
| #endif |
| #ifdef CONFIG_THUMB2_KERNEL |
| case R_ARM_THM_CALL: |
| case R_ARM_THM_JUMP24: |
| /* |
| * For function symbols, only Thumb addresses are |
| * allowed (no interworking). |
| * |
| * For non-function symbols, the destination |
| * has no specific ARM/Thumb disposition, so |
| * the branch is resolved under the assumption |
| * that interworking is not required. |
| */ |
| if (ELF32_ST_TYPE(sym->st_info) == STT_FUNC && |
| !(sym->st_value & 1)) { |
| pr_err("%s: section %u reloc %u sym '%s': unsupported interworking call (Thumb -> ARM)\n", |
| module->name, relindex, i, symname); |
| return -ENOEXEC; |
| } |
| |
| upper = __mem_to_opcode_thumb16(*(u16 *)loc); |
| lower = __mem_to_opcode_thumb16(*(u16 *)(loc + 2)); |
| |
| /* |
| * 25 bit signed address range (Thumb-2 BL and B.W |
| * instructions): |
| * S:I1:I2:imm10:imm11:0 |
| * where: |
| * S = upper[10] = offset[24] |
| * I1 = ~(J1 ^ S) = offset[23] |
| * I2 = ~(J2 ^ S) = offset[22] |
| * imm10 = upper[9:0] = offset[21:12] |
| * imm11 = lower[10:0] = offset[11:1] |
| * J1 = lower[13] |
| * J2 = lower[11] |
| */ |
| sign = (upper >> 10) & 1; |
| j1 = (lower >> 13) & 1; |
| j2 = (lower >> 11) & 1; |
| offset = (sign << 24) | ((~(j1 ^ sign) & 1) << 23) | |
| ((~(j2 ^ sign) & 1) << 22) | |
| ((upper & 0x03ff) << 12) | |
| ((lower & 0x07ff) << 1); |
| offset = sign_extend32(offset, 24); |
| offset += sym->st_value - loc; |
| |
| /* |
| * Route through a PLT entry if 'offset' exceeds the |
| * supported range. |
| */ |
| if (IS_ENABLED(CONFIG_ARM_MODULE_PLTS) && |
| (offset <= (s32)0xff000000 || |
| offset >= (s32)0x01000000)) |
| offset = get_module_plt(module, loc, |
| offset + loc + 4) |
| - loc - 4; |
| |
| if (offset <= (s32)0xff000000 || |
| offset >= (s32)0x01000000) { |
| pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n", |
| module->name, relindex, i, symname, |
| ELF32_R_TYPE(rel->r_info), loc, |
| sym->st_value); |
| return -ENOEXEC; |
| } |
| |
| sign = (offset >> 24) & 1; |
| j1 = sign ^ (~(offset >> 23) & 1); |
| j2 = sign ^ (~(offset >> 22) & 1); |
| upper = (u16)((upper & 0xf800) | (sign << 10) | |
| ((offset >> 12) & 0x03ff)); |
| lower = (u16)((lower & 0xd000) | |
| (j1 << 13) | (j2 << 11) | |
| ((offset >> 1) & 0x07ff)); |
| |
| *(u16 *)loc = __opcode_to_mem_thumb16(upper); |
| *(u16 *)(loc + 2) = __opcode_to_mem_thumb16(lower); |
| break; |
| |
| case R_ARM_THM_MOVW_ABS_NC: |
| case R_ARM_THM_MOVT_ABS: |
| case R_ARM_THM_MOVW_PREL_NC: |
| case R_ARM_THM_MOVT_PREL: |
| upper = __mem_to_opcode_thumb16(*(u16 *)loc); |
| lower = __mem_to_opcode_thumb16(*(u16 *)(loc + 2)); |
| |
| /* |
| * MOVT/MOVW instructions encoding in Thumb-2: |
| * |
| * i = upper[10] |
| * imm4 = upper[3:0] |
| * imm3 = lower[14:12] |
| * imm8 = lower[7:0] |
| * |
| * imm16 = imm4:i:imm3:imm8 |
| */ |
| offset = ((upper & 0x000f) << 12) | |
| ((upper & 0x0400) << 1) | |
| ((lower & 0x7000) >> 4) | (lower & 0x00ff); |
| offset = sign_extend32(offset, 15); |
| offset += sym->st_value; |
| |
| if (ELF32_R_TYPE(rel->r_info) == R_ARM_THM_MOVT_PREL || |
| ELF32_R_TYPE(rel->r_info) == R_ARM_THM_MOVW_PREL_NC) |
| offset -= loc; |
| if (ELF32_R_TYPE(rel->r_info) == R_ARM_THM_MOVT_ABS || |
| ELF32_R_TYPE(rel->r_info) == R_ARM_THM_MOVT_PREL) |
| offset >>= 16; |
| |
| upper = (u16)((upper & 0xfbf0) | |
| ((offset & 0xf000) >> 12) | |
| ((offset & 0x0800) >> 1)); |
| lower = (u16)((lower & 0x8f00) | |
| ((offset & 0x0700) << 4) | |
| (offset & 0x00ff)); |
| *(u16 *)loc = __opcode_to_mem_thumb16(upper); |
| *(u16 *)(loc + 2) = __opcode_to_mem_thumb16(lower); |
| break; |
| #endif |
| |
| default: |
| pr_err("%s: unknown relocation: %u\n", |
| module->name, ELF32_R_TYPE(rel->r_info)); |
| return -ENOEXEC; |
| } |
| } |
| return 0; |
| } |
| |
| static const Elf_Shdr *find_mod_section(const Elf32_Ehdr *hdr, |
| const Elf_Shdr *sechdrs, const char *name) |
| { |
| const Elf_Shdr *s, *se; |
| const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; |
| |
| for (s = sechdrs, se = sechdrs + hdr->e_shnum; s < se; s++) |
| if (strcmp(name, secstrs + s->sh_name) == 0) |
| return s; |
| |
| return NULL; |
| } |
| |
| extern void fixup_pv_table(const void *, unsigned long); |
| extern void fixup_smp(const void *, unsigned long); |
| |
| int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs, |
| struct module *mod) |
| { |
| const Elf_Shdr *s = NULL; |
| #ifdef CONFIG_ARM_UNWIND |
| const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; |
| const Elf_Shdr *sechdrs_end = sechdrs + hdr->e_shnum; |
| struct list_head *unwind_list = &mod->arch.unwind_list; |
| |
| INIT_LIST_HEAD(unwind_list); |
| mod->arch.init_table = NULL; |
| |
| for (s = sechdrs; s < sechdrs_end; s++) { |
| const char *secname = secstrs + s->sh_name; |
| const char *txtname; |
| const Elf_Shdr *txt_sec; |
| |
| if (!(s->sh_flags & SHF_ALLOC) || |
| s->sh_type != ELF_SECTION_UNWIND) |
| continue; |
| |
| if (!strcmp(".ARM.exidx", secname)) |
| txtname = ".text"; |
| else |
| txtname = secname + strlen(".ARM.exidx"); |
| txt_sec = find_mod_section(hdr, sechdrs, txtname); |
| |
| if (txt_sec) { |
| struct unwind_table *table = |
| unwind_table_add(s->sh_addr, |
| s->sh_size, |
| txt_sec->sh_addr, |
| txt_sec->sh_size); |
| |
| list_add(&table->mod_list, unwind_list); |
| |
| /* save init table for module_arch_freeing_init */ |
| if (strcmp(".ARM.exidx.init.text", secname) == 0) |
| mod->arch.init_table = table; |
| } |
| } |
| #endif |
| #ifdef CONFIG_ARM_PATCH_PHYS_VIRT |
| s = find_mod_section(hdr, sechdrs, ".pv_table"); |
| if (s) |
| fixup_pv_table((void *)s->sh_addr, s->sh_size); |
| #endif |
| s = find_mod_section(hdr, sechdrs, ".alt.smp.init"); |
| if (s && !is_smp()) |
| #ifdef CONFIG_SMP_ON_UP |
| fixup_smp((void *)s->sh_addr, s->sh_size); |
| #else |
| return -EINVAL; |
| #endif |
| return 0; |
| } |
| |
| void |
| module_arch_cleanup(struct module *mod) |
| { |
| #ifdef CONFIG_ARM_UNWIND |
| struct unwind_table *tmp; |
| struct unwind_table *n; |
| |
| list_for_each_entry_safe(tmp, n, |
| &mod->arch.unwind_list, mod_list) { |
| list_del(&tmp->mod_list); |
| unwind_table_del(tmp); |
| } |
| mod->arch.init_table = NULL; |
| #endif |
| } |
| |
| void __weak module_arch_freeing_init(struct module *mod) |
| { |
| #ifdef CONFIG_ARM_UNWIND |
| struct unwind_table *init = mod->arch.init_table; |
| |
| if (init) { |
| mod->arch.init_table = NULL; |
| list_del(&init->mod_list); |
| unwind_table_del(init); |
| } |
| #endif |
| } |