| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Samsung's Exynos7 SoC pin-mux and pin-config device tree source |
| * |
| * Copyright (c) 2014 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com |
| * |
| * Samsung's Exynos7 SoC pin-mux and pin-config options are listed as |
| * device tree nodes in this file. |
| */ |
| |
| #include "exynos-pinctrl.h" |
| |
| &pinctrl_alive { |
| gpa0: gpa0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| interrupt-parent = <&gic>; |
| #interrupt-cells = <2>; |
| interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| gpa1: gpa1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| interrupt-parent = <&gic>; |
| #interrupt-cells = <2>; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| gpa2: gpa2-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpa3: gpa3-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| &pinctrl_bus0 { |
| gpb0: gpb0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpc0: gpc0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpc1: gpc1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpc2: gpc2-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpc3: gpc3-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpd0: gpd0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpd1: gpd1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpd2: gpd2-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpd4: gpd4-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpd5: gpd5-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpd6: gpd6-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpd7: gpd7-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpd8: gpd8-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpg0: gpg0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpg3: gpg3-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| hs_i2c10_bus: hs-i2c10-bus-pins { |
| samsung,pins = "gpb0-1", "gpb0-0"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; |
| }; |
| |
| hs_i2c11_bus: hs-i2c11-bus-pins { |
| samsung,pins = "gpb0-3", "gpb0-2"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; |
| }; |
| |
| hs_i2c2_bus: hs-i2c2-bus-pins { |
| samsung,pins = "gpd0-3", "gpd0-2"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_3>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; |
| }; |
| |
| uart0_data: uart0-data-pins { |
| samsung,pins = "gpd0-0", "gpd0-1"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; |
| }; |
| |
| uart0_fctl: uart0-fctl-pins { |
| samsung,pins = "gpd0-2", "gpd0-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; |
| }; |
| |
| uart2_data: uart2-data-pins { |
| samsung,pins = "gpd1-4", "gpd1-5"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; |
| }; |
| |
| hs_i2c3_bus: hs-i2c3-bus-pins { |
| samsung,pins = "gpd1-3", "gpd1-2"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_3>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; |
| }; |
| |
| uart1_data: uart1-data-pins { |
| samsung,pins = "gpd1-0", "gpd1-1"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; |
| }; |
| |
| uart1_fctl: uart1-fctl-pins { |
| samsung,pins = "gpd1-2", "gpd1-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; |
| }; |
| |
| hs_i2c0_bus: hs-i2c0-bus-pins { |
| samsung,pins = "gpd2-1", "gpd2-0"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; |
| }; |
| |
| hs_i2c1_bus: hs-i2c1-bus-pins { |
| samsung,pins = "gpd2-3", "gpd2-2"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; |
| }; |
| |
| hs_i2c9_bus: hs-i2c9-bus-pins { |
| samsung,pins = "gpd2-7", "gpd2-6"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_3>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; |
| }; |
| |
| pwm0_out: pwm0-out-pins { |
| samsung,pins = "gpd2-4"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; |
| }; |
| |
| pwm1_out: pwm1-out-pins { |
| samsung,pins = "gpd2-5"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; |
| }; |
| |
| pwm2_out: pwm2-out-pins { |
| samsung,pins = "gpd2-6"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; |
| }; |
| |
| pwm3_out: pwm3-out-pins { |
| samsung,pins = "gpd2-7"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; |
| }; |
| |
| hs_i2c8_bus: hs-i2c8-bus-pins { |
| samsung,pins = "gpd5-3", "gpd5-2"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_3>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; |
| }; |
| |
| uart3_data: uart3-data-pins { |
| samsung,pins = "gpd5-0", "gpd5-1"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_3>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; |
| }; |
| |
| spi2_bus: spi2-bus-pins { |
| samsung,pins = "gpd5-0", "gpd5-1", "gpd5-2", "gpd5-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; |
| }; |
| |
| spi1_bus: spi1-bus-pins { |
| samsung,pins = "gpd6-2", "gpd6-3", "gpd6-4", "gpd6-5"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; |
| }; |
| |
| spi0_bus: spi0-bus-pins { |
| samsung,pins = "gpd8-0", "gpd8-1", "gpd6-0", "gpd6-1"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; |
| }; |
| |
| hs_i2c4_bus: hs-i2c4-bus-pins { |
| samsung,pins = "gpg3-1", "gpg3-0"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; |
| }; |
| |
| hs_i2c5_bus: hs-i2c5-bus-pins { |
| samsung,pins = "gpg3-3", "gpg3-2"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; |
| }; |
| }; |
| |
| &pinctrl_nfc { |
| gpj0: gpj0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| hs_i2c6_bus: hs-i2c6-bus-pins { |
| samsung,pins = "gpj0-1", "gpj0-0"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; |
| }; |
| }; |
| |
| &pinctrl_touch { |
| gpj1: gpj1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| hs_i2c7_bus: hs-i2c7-bus-pins { |
| samsung,pins = "gpj1-1", "gpj1-0"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; |
| }; |
| }; |
| |
| &pinctrl_ff { |
| gpg4: gpg4-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| spi3_bus: spi3-bus-pins { |
| samsung,pins = "gpg4-0", "gpg4-1", "gpg4-2", "gpg4-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; |
| }; |
| }; |
| |
| &pinctrl_ese { |
| gpv7: gpv7-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| spi4_bus: spi4-bus-pins { |
| samsung,pins = "gpv7-0", "gpv7-1", "gpv7-2", "gpv7-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; |
| }; |
| }; |
| |
| &pinctrl_fsys0 { |
| gpr4: gpr4-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| sd2_clk: sd2-clk-pins { |
| samsung,pins = "gpr4-0"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>; |
| }; |
| |
| sd2_cmd: sd2-cmd-pins { |
| samsung,pins = "gpr4-1"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>; |
| }; |
| |
| sd2_cd: sd2-cd-pins { |
| samsung,pins = "gpr4-2"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>; |
| }; |
| |
| sd2_bus1: sd2-bus-width1-pins { |
| samsung,pins = "gpr4-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>; |
| }; |
| |
| sd2_bus4: sd2-bus-width4-pins { |
| samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>; |
| }; |
| }; |
| |
| &pinctrl_fsys1 { |
| gpr0: gpr0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpr1: gpr1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpr2: gpr2-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpr3: gpr3-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| sd0_clk: sd0-clk-pins { |
| samsung,pins = "gpr0-0"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>; |
| }; |
| |
| sd0_cmd: sd0-cmd-pins { |
| samsung,pins = "gpr0-1"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>; |
| }; |
| |
| sd0_ds: sd0-ds-pins { |
| samsung,pins = "gpr0-2"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; |
| samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>; |
| }; |
| |
| sd0_qrdy: sd0-qrdy-pins { |
| samsung,pins = "gpr0-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; |
| samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>; |
| }; |
| |
| sd0_bus1: sd0-bus-width1-pins { |
| samsung,pins = "gpr1-0"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>; |
| }; |
| |
| sd0_bus4: sd0-bus-width4-pins { |
| samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>; |
| }; |
| |
| sd0_bus8: sd0-bus-width8-pins { |
| samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>; |
| }; |
| |
| sd1_clk: sd1-clk-pins { |
| samsung,pins = "gpr2-0"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>; |
| }; |
| |
| sd1_cmd: sd1-cmd-pins { |
| samsung,pins = "gpr2-1"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>; |
| }; |
| |
| sd1_ds: sd1-ds-pins { |
| samsung,pins = "gpr2-2"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; |
| samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>; |
| }; |
| |
| sd1_qrdy: sd1-qrdy-pins { |
| samsung,pins = "gpr2-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; |
| samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>; |
| }; |
| |
| sd1_int: sd1-int-pins { |
| samsung,pins = "gpr2-4"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; |
| samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>; |
| }; |
| |
| sd1_bus1: sd1-bus-width1-pins { |
| samsung,pins = "gpr3-0"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>; |
| }; |
| |
| sd1_bus4: sd1-bus-width4-pins { |
| samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>; |
| }; |
| |
| sd1_bus8: sd1-bus-width8-pins { |
| samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>; |
| }; |
| }; |
| |
| &pinctrl_bus1 { |
| gpf0: gpf0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpf1: gpf1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpf2: gpf2-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpf3: gpf3-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpf4: gpf4-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpf5: gpf5-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpg1: gpg1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpg2: gpg2-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gph1: gph1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpv6: gpv6-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| spi5_bus: spi5-bus-pins { |
| samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; |
| }; |
| |
| ufs_refclk_out: ufs-refclk-out-pins { |
| samsung,pins = "gpg2-4"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV2>; |
| }; |
| |
| ufs_rst_n: ufs-rst-n-pins { |
| samsung,pins = "gph1-5"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; |
| }; |
| }; |
