| /* |
| * Copyright (C) ST-Ericsson SA 2010 |
| * |
| * License terms: GNU General Public License (GPL) version 2 |
| * Author: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> |
| * |
| * RTC clock driver for the RTC part of the AB8500 Power management chip. |
| * Based on RTC clock driver for the AB3100 Analog Baseband Chip by |
| * Linus Walleij <linus.walleij@stericsson.com> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/rtc.h> |
| #include <linux/mfd/abx500.h> |
| #include <linux/mfd/ab8500.h> |
| #include <linux/delay.h> |
| |
| #define AB8500_RTC_SOFF_STAT_REG 0x00 |
| #define AB8500_RTC_CC_CONF_REG 0x01 |
| #define AB8500_RTC_READ_REQ_REG 0x02 |
| #define AB8500_RTC_WATCH_TSECMID_REG 0x03 |
| #define AB8500_RTC_WATCH_TSECHI_REG 0x04 |
| #define AB8500_RTC_WATCH_TMIN_LOW_REG 0x05 |
| #define AB8500_RTC_WATCH_TMIN_MID_REG 0x06 |
| #define AB8500_RTC_WATCH_TMIN_HI_REG 0x07 |
| #define AB8500_RTC_ALRM_MIN_LOW_REG 0x08 |
| #define AB8500_RTC_ALRM_MIN_MID_REG 0x09 |
| #define AB8500_RTC_ALRM_MIN_HI_REG 0x0A |
| #define AB8500_RTC_STAT_REG 0x0B |
| #define AB8500_RTC_BKUP_CHG_REG 0x0C |
| #define AB8500_RTC_FORCE_BKUP_REG 0x0D |
| #define AB8500_RTC_CALIB_REG 0x0E |
| #define AB8500_RTC_SWITCH_STAT_REG 0x0F |
| |
| /* RtcReadRequest bits */ |
| #define RTC_READ_REQUEST 0x01 |
| #define RTC_WRITE_REQUEST 0x02 |
| |
| /* RtcCtrl bits */ |
| #define RTC_ALARM_ENA 0x04 |
| #define RTC_STATUS_DATA 0x01 |
| |
| #define COUNTS_PER_SEC (0xF000 / 60) |
| #define AB8500_RTC_EPOCH 2000 |
| |
| static const u8 ab8500_rtc_time_regs[] = { |
| AB8500_RTC_WATCH_TMIN_HI_REG, AB8500_RTC_WATCH_TMIN_MID_REG, |
| AB8500_RTC_WATCH_TMIN_LOW_REG, AB8500_RTC_WATCH_TSECHI_REG, |
| AB8500_RTC_WATCH_TSECMID_REG |
| }; |
| |
| static const u8 ab8500_rtc_alarm_regs[] = { |
| AB8500_RTC_ALRM_MIN_HI_REG, AB8500_RTC_ALRM_MIN_MID_REG, |
| AB8500_RTC_ALRM_MIN_LOW_REG |
| }; |
| |
| /* Calculate the seconds from 1970 to 01-01-2000 00:00:00 */ |
| static unsigned long get_elapsed_seconds(int year) |
| { |
| unsigned long secs; |
| struct rtc_time tm = { |
| .tm_year = year - 1900, |
| .tm_mday = 1, |
| }; |
| |
| /* |
| * This function calculates secs from 1970 and not from |
| * 1900, even if we supply the offset from year 1900. |
| */ |
| rtc_tm_to_time(&tm, &secs); |
| return secs; |
| } |
| |
| static int ab8500_rtc_read_time(struct device *dev, struct rtc_time *tm) |
| { |
| unsigned long timeout = jiffies + HZ; |
| int retval, i; |
| unsigned long mins, secs; |
| unsigned char buf[ARRAY_SIZE(ab8500_rtc_time_regs)]; |
| u8 value; |
| |
| /* Request a data read */ |
| retval = abx500_set_register_interruptible(dev, |
| AB8500_RTC, AB8500_RTC_READ_REQ_REG, RTC_READ_REQUEST); |
| if (retval < 0) |
| return retval; |
| |
| /* Early AB8500 chips will not clear the rtc read request bit */ |
| if (abx500_get_chip_id(dev) == 0) { |
| usleep_range(1000, 1000); |
| } else { |
| /* Wait for some cycles after enabling the rtc read in ab8500 */ |
| while (time_before(jiffies, timeout)) { |
| retval = abx500_get_register_interruptible(dev, |
| AB8500_RTC, AB8500_RTC_READ_REQ_REG, &value); |
| if (retval < 0) |
| return retval; |
| |
| if (!(value & RTC_READ_REQUEST)) |
| break; |
| |
| usleep_range(1000, 5000); |
| } |
| } |
| |
| /* Read the Watchtime registers */ |
| for (i = 0; i < ARRAY_SIZE(ab8500_rtc_time_regs); i++) { |
| retval = abx500_get_register_interruptible(dev, |
| AB8500_RTC, ab8500_rtc_time_regs[i], &value); |
| if (retval < 0) |
| return retval; |
| buf[i] = value; |
| } |
| |
| mins = (buf[0] << 16) | (buf[1] << 8) | buf[2]; |
| |
| secs = (buf[3] << 8) | buf[4]; |
| secs = secs / COUNTS_PER_SEC; |
| secs = secs + (mins * 60); |
| |
| /* Add back the initially subtracted number of seconds */ |
| secs += get_elapsed_seconds(AB8500_RTC_EPOCH); |
| |
| rtc_time_to_tm(secs, tm); |
| return rtc_valid_tm(tm); |
| } |
| |
| static int ab8500_rtc_set_time(struct device *dev, struct rtc_time *tm) |
| { |
| int retval, i; |
| unsigned char buf[ARRAY_SIZE(ab8500_rtc_time_regs)]; |
| unsigned long no_secs, no_mins, secs = 0; |
| |
| if (tm->tm_year < (AB8500_RTC_EPOCH - 1900)) { |
| dev_dbg(dev, "year should be equal to or greater than %d\n", |
| AB8500_RTC_EPOCH); |
| return -EINVAL; |
| } |
| |
| /* Get the number of seconds since 1970 */ |
| rtc_tm_to_time(tm, &secs); |
| |
| /* |
| * Convert it to the number of seconds since 01-01-2000 00:00:00, since |
| * we only have a small counter in the RTC. |
| */ |
| secs -= get_elapsed_seconds(AB8500_RTC_EPOCH); |
| |
| no_mins = secs / 60; |
| |
| no_secs = secs % 60; |
| /* Make the seconds count as per the RTC resolution */ |
| no_secs = no_secs * COUNTS_PER_SEC; |
| |
| buf[4] = no_secs & 0xFF; |
| buf[3] = (no_secs >> 8) & 0xFF; |
| |
| buf[2] = no_mins & 0xFF; |
| buf[1] = (no_mins >> 8) & 0xFF; |
| buf[0] = (no_mins >> 16) & 0xFF; |
| |
| for (i = 0; i < ARRAY_SIZE(ab8500_rtc_time_regs); i++) { |
| retval = abx500_set_register_interruptible(dev, AB8500_RTC, |
| ab8500_rtc_time_regs[i], buf[i]); |
| if (retval < 0) |
| return retval; |
| } |
| |
| /* Request a data write */ |
| return abx500_set_register_interruptible(dev, AB8500_RTC, |
| AB8500_RTC_READ_REQ_REG, RTC_WRITE_REQUEST); |
| } |
| |
| static int ab8500_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm) |
| { |
| int retval, i; |
| u8 rtc_ctrl, value; |
| unsigned char buf[ARRAY_SIZE(ab8500_rtc_alarm_regs)]; |
| unsigned long secs, mins; |
| |
| /* Check if the alarm is enabled or not */ |
| retval = abx500_get_register_interruptible(dev, AB8500_RTC, |
| AB8500_RTC_STAT_REG, &rtc_ctrl); |
| if (retval < 0) |
| return retval; |
| |
| if (rtc_ctrl & RTC_ALARM_ENA) |
| alarm->enabled = 1; |
| else |
| alarm->enabled = 0; |
| |
| alarm->pending = 0; |
| |
| for (i = 0; i < ARRAY_SIZE(ab8500_rtc_alarm_regs); i++) { |
| retval = abx500_get_register_interruptible(dev, AB8500_RTC, |
| ab8500_rtc_alarm_regs[i], &value); |
| if (retval < 0) |
| return retval; |
| buf[i] = value; |
| } |
| |
| mins = (buf[0] << 16) | (buf[1] << 8) | (buf[2]); |
| secs = mins * 60; |
| |
| /* Add back the initially subtracted number of seconds */ |
| secs += get_elapsed_seconds(AB8500_RTC_EPOCH); |
| |
| rtc_time_to_tm(secs, &alarm->time); |
| |
| return rtc_valid_tm(&alarm->time); |
| } |
| |
| static int ab8500_rtc_irq_enable(struct device *dev, unsigned int enabled) |
| { |
| return abx500_mask_and_set_register_interruptible(dev, AB8500_RTC, |
| AB8500_RTC_STAT_REG, RTC_ALARM_ENA, |
| enabled ? RTC_ALARM_ENA : 0); |
| } |
| |
| static int ab8500_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm) |
| { |
| int retval, i; |
| unsigned char buf[ARRAY_SIZE(ab8500_rtc_alarm_regs)]; |
| unsigned long mins, secs = 0; |
| |
| if (alarm->time.tm_year < (AB8500_RTC_EPOCH - 1900)) { |
| dev_dbg(dev, "year should be equal to or greater than %d\n", |
| AB8500_RTC_EPOCH); |
| return -EINVAL; |
| } |
| |
| /* Get the number of seconds since 1970 */ |
| rtc_tm_to_time(&alarm->time, &secs); |
| |
| /* |
| * Convert it to the number of seconds since 01-01-2000 00:00:00, since |
| * we only have a small counter in the RTC. |
| */ |
| secs -= get_elapsed_seconds(AB8500_RTC_EPOCH); |
| |
| mins = secs / 60; |
| |
| buf[2] = mins & 0xFF; |
| buf[1] = (mins >> 8) & 0xFF; |
| buf[0] = (mins >> 16) & 0xFF; |
| |
| /* Set the alarm time */ |
| for (i = 0; i < ARRAY_SIZE(ab8500_rtc_alarm_regs); i++) { |
| retval = abx500_set_register_interruptible(dev, AB8500_RTC, |
| ab8500_rtc_alarm_regs[i], buf[i]); |
| if (retval < 0) |
| return retval; |
| } |
| |
| return ab8500_rtc_irq_enable(dev, alarm->enabled); |
| } |
| |
| static irqreturn_t rtc_alarm_handler(int irq, void *data) |
| { |
| struct rtc_device *rtc = data; |
| unsigned long events = RTC_IRQF | RTC_AF; |
| |
| dev_dbg(&rtc->dev, "%s\n", __func__); |
| rtc_update_irq(rtc, 1, events); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static const struct rtc_class_ops ab8500_rtc_ops = { |
| .read_time = ab8500_rtc_read_time, |
| .set_time = ab8500_rtc_set_time, |
| .read_alarm = ab8500_rtc_read_alarm, |
| .set_alarm = ab8500_rtc_set_alarm, |
| .alarm_irq_enable = ab8500_rtc_irq_enable, |
| }; |
| |
| static int __devinit ab8500_rtc_probe(struct platform_device *pdev) |
| { |
| int err; |
| struct rtc_device *rtc; |
| u8 rtc_ctrl; |
| int irq; |
| |
| irq = platform_get_irq_byname(pdev, "ALARM"); |
| if (irq < 0) |
| return irq; |
| |
| /* For RTC supply test */ |
| err = abx500_mask_and_set_register_interruptible(&pdev->dev, AB8500_RTC, |
| AB8500_RTC_STAT_REG, RTC_STATUS_DATA, RTC_STATUS_DATA); |
| if (err < 0) |
| return err; |
| |
| /* Wait for reset by the PorRtc */ |
| usleep_range(1000, 5000); |
| |
| err = abx500_get_register_interruptible(&pdev->dev, AB8500_RTC, |
| AB8500_RTC_STAT_REG, &rtc_ctrl); |
| if (err < 0) |
| return err; |
| |
| /* Check if the RTC Supply fails */ |
| if (!(rtc_ctrl & RTC_STATUS_DATA)) { |
| dev_err(&pdev->dev, "RTC supply failure\n"); |
| return -ENODEV; |
| } |
| |
| device_init_wakeup(&pdev->dev, true); |
| |
| rtc = rtc_device_register("ab8500-rtc", &pdev->dev, &ab8500_rtc_ops, |
| THIS_MODULE); |
| if (IS_ERR(rtc)) { |
| dev_err(&pdev->dev, "Registration failed\n"); |
| err = PTR_ERR(rtc); |
| return err; |
| } |
| |
| err = request_threaded_irq(irq, NULL, rtc_alarm_handler, |
| IRQF_NO_SUSPEND, "ab8500-rtc", rtc); |
| if (err < 0) { |
| rtc_device_unregister(rtc); |
| return err; |
| } |
| |
| platform_set_drvdata(pdev, rtc); |
| |
| return 0; |
| } |
| |
| static int __devexit ab8500_rtc_remove(struct platform_device *pdev) |
| { |
| struct rtc_device *rtc = platform_get_drvdata(pdev); |
| int irq = platform_get_irq_byname(pdev, "ALARM"); |
| |
| free_irq(irq, rtc); |
| rtc_device_unregister(rtc); |
| platform_set_drvdata(pdev, NULL); |
| |
| return 0; |
| } |
| |
| static struct platform_driver ab8500_rtc_driver = { |
| .driver = { |
| .name = "ab8500-rtc", |
| .owner = THIS_MODULE, |
| }, |
| .probe = ab8500_rtc_probe, |
| .remove = __devexit_p(ab8500_rtc_remove), |
| }; |
| |
| static int __init ab8500_rtc_init(void) |
| { |
| return platform_driver_register(&ab8500_rtc_driver); |
| } |
| |
| static void __exit ab8500_rtc_exit(void) |
| { |
| platform_driver_unregister(&ab8500_rtc_driver); |
| } |
| |
| module_init(ab8500_rtc_init); |
| module_exit(ab8500_rtc_exit); |
| MODULE_AUTHOR("Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>"); |
| MODULE_DESCRIPTION("AB8500 RTC Driver"); |
| MODULE_LICENSE("GPL v2"); |