| // SPDX-License-Identifier: GPL-2.0+ |
| #include <dt-bindings/clock/aspeed-clock.h> |
| #include <dt-bindings/interrupt-controller/aspeed-scu-ic.h> |
| |
| / { |
| model = "Aspeed BMC"; |
| compatible = "aspeed,ast2500"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| interrupt-parent = <&vic>; |
| |
| aliases { |
| i2c0 = &i2c0; |
| i2c1 = &i2c1; |
| i2c2 = &i2c2; |
| i2c3 = &i2c3; |
| i2c4 = &i2c4; |
| i2c5 = &i2c5; |
| i2c6 = &i2c6; |
| i2c7 = &i2c7; |
| i2c8 = &i2c8; |
| i2c9 = &i2c9; |
| i2c10 = &i2c10; |
| i2c11 = &i2c11; |
| i2c12 = &i2c12; |
| i2c13 = &i2c13; |
| serial0 = &uart1; |
| serial1 = &uart2; |
| serial2 = &uart3; |
| serial3 = &uart4; |
| serial4 = &uart5; |
| serial5 = &vuart; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| compatible = "arm,arm1176jzf-s"; |
| device_type = "cpu"; |
| reg = <0>; |
| }; |
| }; |
| |
| memory@80000000 { |
| device_type = "memory"; |
| reg = <0x80000000 0>; |
| }; |
| |
| ahb { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| fmc: spi@1e620000 { |
| reg = < 0x1e620000 0xc4 |
| 0x20000000 0x10000000 >; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "aspeed,ast2500-fmc"; |
| clocks = <&syscon ASPEED_CLK_AHB>; |
| status = "disabled"; |
| interrupts = <19>; |
| flash@0 { |
| reg = < 0 >; |
| compatible = "jedec,spi-nor"; |
| spi-max-frequency = <50000000>; |
| status = "disabled"; |
| }; |
| flash@1 { |
| reg = < 1 >; |
| compatible = "jedec,spi-nor"; |
| spi-max-frequency = <50000000>; |
| status = "disabled"; |
| }; |
| flash@2 { |
| reg = < 2 >; |
| compatible = "jedec,spi-nor"; |
| spi-max-frequency = <50000000>; |
| status = "disabled"; |
| }; |
| }; |
| |
| spi1: spi@1e630000 { |
| reg = < 0x1e630000 0xc4 |
| 0x30000000 0x08000000 >; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "aspeed,ast2500-spi"; |
| clocks = <&syscon ASPEED_CLK_AHB>; |
| status = "disabled"; |
| flash@0 { |
| reg = < 0 >; |
| compatible = "jedec,spi-nor"; |
| spi-max-frequency = <50000000>; |
| status = "disabled"; |
| }; |
| flash@1 { |
| reg = < 1 >; |
| compatible = "jedec,spi-nor"; |
| spi-max-frequency = <50000000>; |
| status = "disabled"; |
| }; |
| }; |
| |
| spi2: spi@1e631000 { |
| reg = < 0x1e631000 0xc4 |
| 0x38000000 0x08000000 >; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "aspeed,ast2500-spi"; |
| clocks = <&syscon ASPEED_CLK_AHB>; |
| status = "disabled"; |
| flash@0 { |
| reg = < 0 >; |
| compatible = "jedec,spi-nor"; |
| spi-max-frequency = <50000000>; |
| status = "disabled"; |
| }; |
| flash@1 { |
| reg = < 1 >; |
| compatible = "jedec,spi-nor"; |
| spi-max-frequency = <50000000>; |
| status = "disabled"; |
| }; |
| }; |
| |
| vic: interrupt-controller@1e6c0080 { |
| compatible = "aspeed,ast2400-vic"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| valid-sources = <0xfefff7ff 0x0807ffff>; |
| reg = <0x1e6c0080 0x80>; |
| }; |
| |
| cvic: copro-interrupt-controller@1e6c2000 { |
| compatible = "aspeed,ast2500-cvic", "aspeed-cvic"; |
| valid-sources = <0xffffffff>; |
| copro-sw-interrupts = <1>; |
| reg = <0x1e6c2000 0x80>; |
| }; |
| |
| mac0: ethernet@1e660000 { |
| compatible = "aspeed,ast2500-mac", "faraday,ftgmac100"; |
| reg = <0x1e660000 0x180>; |
| interrupts = <2>; |
| clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>; |
| status = "disabled"; |
| }; |
| |
| mac1: ethernet@1e680000 { |
| compatible = "aspeed,ast2500-mac", "faraday,ftgmac100"; |
| reg = <0x1e680000 0x180>; |
| interrupts = <3>; |
| clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>; |
| status = "disabled"; |
| }; |
| |
| ehci0: usb@1e6a1000 { |
| compatible = "aspeed,ast2500-ehci", "generic-ehci"; |
| reg = <0x1e6a1000 0x100>; |
| interrupts = <5>; |
| clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usb2ah_default>; |
| status = "disabled"; |
| }; |
| |
| ehci1: usb@1e6a3000 { |
| compatible = "aspeed,ast2500-ehci", "generic-ehci"; |
| reg = <0x1e6a3000 0x100>; |
| interrupts = <13>; |
| clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usb2bh_default>; |
| status = "disabled"; |
| }; |
| |
| uhci: usb@1e6b0000 { |
| compatible = "aspeed,ast2500-uhci", "generic-uhci"; |
| reg = <0x1e6b0000 0x100>; |
| interrupts = <14>; |
| #ports = <2>; |
| clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>; |
| status = "disabled"; |
| /* |
| * No default pinmux, it will follow EHCI, use an explicit pinmux |
| * override if you don't enable EHCI |
| */ |
| }; |
| |
| vhub: usb-vhub@1e6a0000 { |
| compatible = "aspeed,ast2500-usb-vhub"; |
| reg = <0x1e6a0000 0x300>; |
| interrupts = <5>; |
| clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; |
| aspeed,vhub-downstream-ports = <5>; |
| aspeed,vhub-generic-endpoints = <15>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usb2ad_default>; |
| status = "disabled"; |
| }; |
| |
| apb { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| edac: memory-controller@1e6e0000 { |
| compatible = "aspeed,ast2500-sdram-edac"; |
| reg = <0x1e6e0000 0x174>; |
| interrupts = <0>; |
| status = "disabled"; |
| }; |
| |
| syscon: syscon@1e6e2000 { |
| compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd"; |
| reg = <0x1e6e2000 0x1a8>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x1e6e2000 0x1000>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| |
| scu_ic: interrupt-controller@18 { |
| #interrupt-cells = <1>; |
| compatible = "aspeed,ast2500-scu-ic"; |
| reg = <0x18 0x4>; |
| interrupts = <21>; |
| interrupt-controller; |
| }; |
| |
| p2a: p2a-control@2c { |
| compatible = "aspeed,ast2500-p2a-ctrl"; |
| reg = <0x2c 0x4>; |
| status = "disabled"; |
| }; |
| |
| silicon-id@7c { |
| compatible = "aspeed,ast2500-silicon-id", "aspeed,silicon-id"; |
| reg = <0x7c 0x4 0x150 0x8>; |
| }; |
| |
| pinctrl: pinctrl@80 { |
| compatible = "aspeed,ast2500-pinctrl"; |
| reg = <0x80 0x18>, <0xa0 0x10>; |
| aspeed,external-nodes = <&gfx>, <&lhc>; |
| }; |
| }; |
| |
| rng: hwrng@1e6e2078 { |
| compatible = "timeriomem_rng"; |
| reg = <0x1e6e2078 0x4>; |
| period = <1>; |
| quality = <100>; |
| }; |
| |
| gfx: display@1e6e6000 { |
| compatible = "aspeed,ast2500-gfx", "syscon"; |
| reg = <0x1e6e6000 0x1000>; |
| reg-io-width = <4>; |
| clocks = <&syscon ASPEED_CLK_GATE_D1CLK>; |
| resets = <&syscon ASPEED_RESET_CRT1>; |
| status = "disabled"; |
| interrupts = <0x19>; |
| }; |
| |
| xdma: xdma@1e6e7000 { |
| compatible = "aspeed,ast2500-xdma"; |
| reg = <0x1e6e7000 0x100>; |
| clocks = <&syscon ASPEED_CLK_GATE_BCLK>; |
| resets = <&syscon ASPEED_RESET_XDMA>; |
| interrupts-extended = <&vic 6>, <&scu_ic ASPEED_AST2500_SCU_IC_PCIE_RESET_LO_TO_HI>; |
| aspeed,pcie-device = "bmc"; |
| aspeed,scu = <&syscon>; |
| status = "disabled"; |
| }; |
| |
| adc: adc@1e6e9000 { |
| compatible = "aspeed,ast2500-adc"; |
| reg = <0x1e6e9000 0xb0>; |
| clocks = <&syscon ASPEED_CLK_APB>; |
| resets = <&syscon ASPEED_RESET_ADC>; |
| #io-channel-cells = <1>; |
| status = "disabled"; |
| }; |
| |
| video: video@1e700000 { |
| compatible = "aspeed,ast2500-video-engine"; |
| reg = <0x1e700000 0x1000>; |
| clocks = <&syscon ASPEED_CLK_GATE_VCLK>, |
| <&syscon ASPEED_CLK_GATE_ECLK>; |
| clock-names = "vclk", "eclk"; |
| interrupts = <7>; |
| status = "disabled"; |
| }; |
| |
| sram: sram@1e720000 { |
| compatible = "mmio-sram"; |
| reg = <0x1e720000 0x9000>; // 36K |
| }; |
| |
| sdmmc: sd-controller@1e740000 { |
| compatible = "aspeed,ast2500-sd-controller"; |
| reg = <0x1e740000 0x100>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x1e740000 0x10000>; |
| clocks = <&syscon ASPEED_CLK_GATE_SDCLK>; |
| status = "disabled"; |
| |
| sdhci0: sdhci@100 { |
| compatible = "aspeed,ast2500-sdhci"; |
| reg = <0x100 0x100>; |
| interrupts = <26>; |
| sdhci,auto-cmd12; |
| clocks = <&syscon ASPEED_CLK_SDIO>; |
| status = "disabled"; |
| }; |
| |
| sdhci1: sdhci@200 { |
| compatible = "aspeed,ast2500-sdhci"; |
| reg = <0x200 0x100>; |
| interrupts = <26>; |
| sdhci,auto-cmd12; |
| clocks = <&syscon ASPEED_CLK_SDIO>; |
| status = "disabled"; |
| }; |
| }; |
| |
| gpio: gpio@1e780000 { |
| #gpio-cells = <2>; |
| gpio-controller; |
| compatible = "aspeed,ast2500-gpio"; |
| reg = <0x1e780000 0x200>; |
| interrupts = <20>; |
| gpio-ranges = <&pinctrl 0 0 232>; |
| clocks = <&syscon ASPEED_CLK_APB>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| sgpio: sgpio@1e780200 { |
| #gpio-cells = <2>; |
| compatible = "aspeed,ast2500-sgpio"; |
| gpio-controller; |
| interrupts = <40>; |
| reg = <0x1e780200 0x0100>; |
| clocks = <&syscon ASPEED_CLK_APB>; |
| interrupt-controller; |
| ngpios = <8>; |
| bus-frequency = <12000000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sgpm_default>; |
| status = "disabled"; |
| }; |
| |
| rtc: rtc@1e781000 { |
| compatible = "aspeed,ast2500-rtc"; |
| reg = <0x1e781000 0x18>; |
| status = "disabled"; |
| }; |
| |
| timer: timer@1e782000 { |
| /* This timer is a Faraday FTTMR010 derivative */ |
| compatible = "aspeed,ast2400-timer"; |
| reg = <0x1e782000 0x90>; |
| interrupts = <16 17 18 35 36 37 38 39>; |
| clocks = <&syscon ASPEED_CLK_APB>; |
| clock-names = "PCLK"; |
| }; |
| |
| uart1: serial@1e783000 { |
| compatible = "ns16550a"; |
| reg = <0x1e783000 0x20>; |
| reg-shift = <2>; |
| interrupts = <9>; |
| clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>; |
| resets = <&lpc_reset 4>; |
| no-loopback-test; |
| status = "disabled"; |
| }; |
| |
| uart5: serial@1e784000 { |
| compatible = "ns16550a"; |
| reg = <0x1e784000 0x20>; |
| reg-shift = <2>; |
| interrupts = <10>; |
| clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>; |
| no-loopback-test; |
| status = "disabled"; |
| }; |
| |
| wdt1: watchdog@1e785000 { |
| compatible = "aspeed,ast2500-wdt"; |
| reg = <0x1e785000 0x20>; |
| clocks = <&syscon ASPEED_CLK_APB>; |
| }; |
| |
| wdt2: watchdog@1e785020 { |
| compatible = "aspeed,ast2500-wdt"; |
| reg = <0x1e785020 0x20>; |
| clocks = <&syscon ASPEED_CLK_APB>; |
| }; |
| |
| wdt3: watchdog@1e785040 { |
| compatible = "aspeed,ast2500-wdt"; |
| reg = <0x1e785040 0x20>; |
| clocks = <&syscon ASPEED_CLK_APB>; |
| status = "disabled"; |
| }; |
| |
| pwm_tacho: pwm-tacho-controller@1e786000 { |
| compatible = "aspeed,ast2500-pwm-tacho"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x1e786000 0x1000>; |
| clocks = <&syscon ASPEED_CLK_24M>; |
| resets = <&syscon ASPEED_RESET_PWM>; |
| status = "disabled"; |
| }; |
| |
| vuart: serial@1e787000 { |
| compatible = "aspeed,ast2500-vuart"; |
| reg = <0x1e787000 0x40>; |
| reg-shift = <2>; |
| interrupts = <8>; |
| clocks = <&syscon ASPEED_CLK_APB>; |
| no-loopback-test; |
| status = "disabled"; |
| }; |
| |
| lpc: lpc@1e789000 { |
| compatible = "aspeed,ast2500-lpc", "simple-mfd"; |
| reg = <0x1e789000 0x1000>; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x1e789000 0x1000>; |
| |
| lpc_bmc: lpc-bmc@0 { |
| compatible = "aspeed,ast2500-lpc-bmc", "simple-mfd", "syscon"; |
| reg = <0x0 0x80>; |
| reg-io-width = <4>; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x80>; |
| |
| kcs1: kcs@24 { |
| compatible = "aspeed,ast2500-kcs-bmc-v2"; |
| reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>; |
| interrupts = <8>; |
| status = "disabled"; |
| }; |
| kcs2: kcs@28 { |
| compatible = "aspeed,ast2500-kcs-bmc-v2"; |
| reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>; |
| interrupts = <8>; |
| status = "disabled"; |
| }; |
| kcs3: kcs@2c { |
| compatible = "aspeed,ast2500-kcs-bmc-v2"; |
| reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>; |
| interrupts = <8>; |
| status = "disabled"; |
| }; |
| }; |
| |
| lpc_host: lpc-host@80 { |
| compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon"; |
| reg = <0x80 0x1e0>; |
| reg-io-width = <4>; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x80 0x1e0>; |
| |
| kcs4: kcs@94 { |
| compatible = "aspeed,ast2500-kcs-bmc-v2"; |
| reg = <0x94 0x1>, <0x98 0x1>, <0x9c 0x1>; |
| interrupts = <8>; |
| status = "disabled"; |
| }; |
| |
| lpc_ctrl: lpc-ctrl@0 { |
| compatible = "aspeed,ast2500-lpc-ctrl"; |
| reg = <0x0 0x10>; |
| clocks = <&syscon ASPEED_CLK_GATE_LCLK>; |
| status = "disabled"; |
| }; |
| |
| lpc_snoop: lpc-snoop@10 { |
| compatible = "aspeed,ast2500-lpc-snoop"; |
| reg = <0x10 0x8>; |
| interrupts = <8>; |
| clocks = <&syscon ASPEED_CLK_GATE_LCLK>; |
| status = "disabled"; |
| }; |
| |
| lpc_reset: reset-controller@18 { |
| compatible = "aspeed,ast2500-lpc-reset"; |
| reg = <0x18 0x4>; |
| #reset-cells = <1>; |
| }; |
| |
| lhc: lhc@20 { |
| compatible = "aspeed,ast2500-lhc"; |
| reg = <0x20 0x24 0x48 0x8>; |
| }; |
| |
| |
| ibt: ibt@c0 { |
| compatible = "aspeed,ast2500-ibt-bmc"; |
| reg = <0xc0 0x18>; |
| interrupts = <8>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| uart2: serial@1e78d000 { |
| compatible = "ns16550a"; |
| reg = <0x1e78d000 0x20>; |
| reg-shift = <2>; |
| interrupts = <32>; |
| clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>; |
| resets = <&lpc_reset 5>; |
| no-loopback-test; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@1e78e000 { |
| compatible = "ns16550a"; |
| reg = <0x1e78e000 0x20>; |
| reg-shift = <2>; |
| interrupts = <33>; |
| clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>; |
| resets = <&lpc_reset 6>; |
| no-loopback-test; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@1e78f000 { |
| compatible = "ns16550a"; |
| reg = <0x1e78f000 0x20>; |
| reg-shift = <2>; |
| interrupts = <34>; |
| clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>; |
| resets = <&lpc_reset 7>; |
| no-loopback-test; |
| status = "disabled"; |
| }; |
| |
| i2c: bus@1e78a000 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x1e78a000 0x1000>; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c { |
| i2c_ic: interrupt-controller@0 { |
| #interrupt-cells = <1>; |
| compatible = "aspeed,ast2500-i2c-ic"; |
| reg = <0x0 0x40>; |
| interrupts = <12>; |
| interrupt-controller; |
| }; |
| |
| i2c0: i2c-bus@40 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #interrupt-cells = <1>; |
| |
| reg = <0x40 0x40>; |
| compatible = "aspeed,ast2500-i2c-bus"; |
| clocks = <&syscon ASPEED_CLK_APB>; |
| resets = <&syscon ASPEED_RESET_I2C>; |
| bus-frequency = <100000>; |
| interrupts = <0>; |
| interrupt-parent = <&i2c_ic>; |
| status = "disabled"; |
| /* Does not need pinctrl properties */ |
| }; |
| |
| i2c1: i2c-bus@80 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #interrupt-cells = <1>; |
| |
| reg = <0x80 0x40>; |
| compatible = "aspeed,ast2500-i2c-bus"; |
| clocks = <&syscon ASPEED_CLK_APB>; |
| resets = <&syscon ASPEED_RESET_I2C>; |
| bus-frequency = <100000>; |
| interrupts = <1>; |
| interrupt-parent = <&i2c_ic>; |
| status = "disabled"; |
| /* Does not need pinctrl properties */ |
| }; |
| |
| i2c2: i2c-bus@c0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #interrupt-cells = <1>; |
| |
| reg = <0xc0 0x40>; |
| compatible = "aspeed,ast2500-i2c-bus"; |
| clocks = <&syscon ASPEED_CLK_APB>; |
| resets = <&syscon ASPEED_RESET_I2C>; |
| bus-frequency = <100000>; |
| interrupts = <2>; |
| interrupt-parent = <&i2c_ic>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c3_default>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c-bus@100 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #interrupt-cells = <1>; |
| |
| reg = <0x100 0x40>; |
| compatible = "aspeed,ast2500-i2c-bus"; |
| clocks = <&syscon ASPEED_CLK_APB>; |
| resets = <&syscon ASPEED_RESET_I2C>; |
| bus-frequency = <100000>; |
| interrupts = <3>; |
| interrupt-parent = <&i2c_ic>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c4_default>; |
| status = "disabled"; |
| }; |
| |
| i2c4: i2c-bus@140 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #interrupt-cells = <1>; |
| |
| reg = <0x140 0x40>; |
| compatible = "aspeed,ast2500-i2c-bus"; |
| clocks = <&syscon ASPEED_CLK_APB>; |
| resets = <&syscon ASPEED_RESET_I2C>; |
| bus-frequency = <100000>; |
| interrupts = <4>; |
| interrupt-parent = <&i2c_ic>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c5_default>; |
| status = "disabled"; |
| }; |
| |
| i2c5: i2c-bus@180 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #interrupt-cells = <1>; |
| |
| reg = <0x180 0x40>; |
| compatible = "aspeed,ast2500-i2c-bus"; |
| clocks = <&syscon ASPEED_CLK_APB>; |
| resets = <&syscon ASPEED_RESET_I2C>; |
| bus-frequency = <100000>; |
| interrupts = <5>; |
| interrupt-parent = <&i2c_ic>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c6_default>; |
| status = "disabled"; |
| }; |
| |
| i2c6: i2c-bus@1c0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #interrupt-cells = <1>; |
| |
| reg = <0x1c0 0x40>; |
| compatible = "aspeed,ast2500-i2c-bus"; |
| clocks = <&syscon ASPEED_CLK_APB>; |
| resets = <&syscon ASPEED_RESET_I2C>; |
| bus-frequency = <100000>; |
| interrupts = <6>; |
| interrupt-parent = <&i2c_ic>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c7_default>; |
| status = "disabled"; |
| }; |
| |
| i2c7: i2c-bus@300 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #interrupt-cells = <1>; |
| |
| reg = <0x300 0x40>; |
| compatible = "aspeed,ast2500-i2c-bus"; |
| clocks = <&syscon ASPEED_CLK_APB>; |
| resets = <&syscon ASPEED_RESET_I2C>; |
| bus-frequency = <100000>; |
| interrupts = <7>; |
| interrupt-parent = <&i2c_ic>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c8_default>; |
| status = "disabled"; |
| }; |
| |
| i2c8: i2c-bus@340 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #interrupt-cells = <1>; |
| |
| reg = <0x340 0x40>; |
| compatible = "aspeed,ast2500-i2c-bus"; |
| clocks = <&syscon ASPEED_CLK_APB>; |
| resets = <&syscon ASPEED_RESET_I2C>; |
| bus-frequency = <100000>; |
| interrupts = <8>; |
| interrupt-parent = <&i2c_ic>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c9_default>; |
| status = "disabled"; |
| }; |
| |
| i2c9: i2c-bus@380 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #interrupt-cells = <1>; |
| |
| reg = <0x380 0x40>; |
| compatible = "aspeed,ast2500-i2c-bus"; |
| clocks = <&syscon ASPEED_CLK_APB>; |
| resets = <&syscon ASPEED_RESET_I2C>; |
| bus-frequency = <100000>; |
| interrupts = <9>; |
| interrupt-parent = <&i2c_ic>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c10_default>; |
| status = "disabled"; |
| }; |
| |
| i2c10: i2c-bus@3c0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #interrupt-cells = <1>; |
| |
| reg = <0x3c0 0x40>; |
| compatible = "aspeed,ast2500-i2c-bus"; |
| clocks = <&syscon ASPEED_CLK_APB>; |
| resets = <&syscon ASPEED_RESET_I2C>; |
| bus-frequency = <100000>; |
| interrupts = <10>; |
| interrupt-parent = <&i2c_ic>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c11_default>; |
| status = "disabled"; |
| }; |
| |
| i2c11: i2c-bus@400 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #interrupt-cells = <1>; |
| |
| reg = <0x400 0x40>; |
| compatible = "aspeed,ast2500-i2c-bus"; |
| clocks = <&syscon ASPEED_CLK_APB>; |
| resets = <&syscon ASPEED_RESET_I2C>; |
| bus-frequency = <100000>; |
| interrupts = <11>; |
| interrupt-parent = <&i2c_ic>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c12_default>; |
| status = "disabled"; |
| }; |
| |
| i2c12: i2c-bus@440 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #interrupt-cells = <1>; |
| |
| reg = <0x440 0x40>; |
| compatible = "aspeed,ast2500-i2c-bus"; |
| clocks = <&syscon ASPEED_CLK_APB>; |
| resets = <&syscon ASPEED_RESET_I2C>; |
| bus-frequency = <100000>; |
| interrupts = <12>; |
| interrupt-parent = <&i2c_ic>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c13_default>; |
| status = "disabled"; |
| }; |
| |
| i2c13: i2c-bus@480 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #interrupt-cells = <1>; |
| |
| reg = <0x480 0x40>; |
| compatible = "aspeed,ast2500-i2c-bus"; |
| clocks = <&syscon ASPEED_CLK_APB>; |
| resets = <&syscon ASPEED_RESET_I2C>; |
| bus-frequency = <100000>; |
| interrupts = <13>; |
| interrupt-parent = <&i2c_ic>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c14_default>; |
| status = "disabled"; |
| }; |
| }; |
| |
| &pinctrl { |
| pinctrl_acpi_default: acpi_default { |
| function = "ACPI"; |
| groups = "ACPI"; |
| }; |
| |
| pinctrl_adc0_default: adc0_default { |
| function = "ADC0"; |
| groups = "ADC0"; |
| }; |
| |
| pinctrl_adc1_default: adc1_default { |
| function = "ADC1"; |
| groups = "ADC1"; |
| }; |
| |
| pinctrl_adc10_default: adc10_default { |
| function = "ADC10"; |
| groups = "ADC10"; |
| }; |
| |
| pinctrl_adc11_default: adc11_default { |
| function = "ADC11"; |
| groups = "ADC11"; |
| }; |
| |
| pinctrl_adc12_default: adc12_default { |
| function = "ADC12"; |
| groups = "ADC12"; |
| }; |
| |
| pinctrl_adc13_default: adc13_default { |
| function = "ADC13"; |
| groups = "ADC13"; |
| }; |
| |
| pinctrl_adc14_default: adc14_default { |
| function = "ADC14"; |
| groups = "ADC14"; |
| }; |
| |
| pinctrl_adc15_default: adc15_default { |
| function = "ADC15"; |
| groups = "ADC15"; |
| }; |
| |
| pinctrl_adc2_default: adc2_default { |
| function = "ADC2"; |
| groups = "ADC2"; |
| }; |
| |
| pinctrl_adc3_default: adc3_default { |
| function = "ADC3"; |
| groups = "ADC3"; |
| }; |
| |
| pinctrl_adc4_default: adc4_default { |
| function = "ADC4"; |
| groups = "ADC4"; |
| }; |
| |
| pinctrl_adc5_default: adc5_default { |
| function = "ADC5"; |
| groups = "ADC5"; |
| }; |
| |
| pinctrl_adc6_default: adc6_default { |
| function = "ADC6"; |
| groups = "ADC6"; |
| }; |
| |
| pinctrl_adc7_default: adc7_default { |
| function = "ADC7"; |
| groups = "ADC7"; |
| }; |
| |
| pinctrl_adc8_default: adc8_default { |
| function = "ADC8"; |
| groups = "ADC8"; |
| }; |
| |
| pinctrl_adc9_default: adc9_default { |
| function = "ADC9"; |
| groups = "ADC9"; |
| }; |
| |
| pinctrl_bmcint_default: bmcint_default { |
| function = "BMCINT"; |
| groups = "BMCINT"; |
| }; |
| |
| pinctrl_ddcclk_default: ddcclk_default { |
| function = "DDCCLK"; |
| groups = "DDCCLK"; |
| }; |
| |
| pinctrl_ddcdat_default: ddcdat_default { |
| function = "DDCDAT"; |
| groups = "DDCDAT"; |
| }; |
| |
| pinctrl_espi_default: espi_default { |
| function = "ESPI"; |
| groups = "ESPI"; |
| }; |
| |
| pinctrl_fwspics1_default: fwspics1_default { |
| function = "FWSPICS1"; |
| groups = "FWSPICS1"; |
| }; |
| |
| pinctrl_fwspics2_default: fwspics2_default { |
| function = "FWSPICS2"; |
| groups = "FWSPICS2"; |
| }; |
| |
| pinctrl_gpid0_default: gpid0_default { |
| function = "GPID0"; |
| groups = "GPID0"; |
| }; |
| |
| pinctrl_gpid2_default: gpid2_default { |
| function = "GPID2"; |
| groups = "GPID2"; |
| }; |
| |
| pinctrl_gpid4_default: gpid4_default { |
| function = "GPID4"; |
| groups = "GPID4"; |
| }; |
| |
| pinctrl_gpid6_default: gpid6_default { |
| function = "GPID6"; |
| groups = "GPID6"; |
| }; |
| |
| pinctrl_gpie0_default: gpie0_default { |
| function = "GPIE0"; |
| groups = "GPIE0"; |
| }; |
| |
| pinctrl_gpie2_default: gpie2_default { |
| function = "GPIE2"; |
| groups = "GPIE2"; |
| }; |
| |
| pinctrl_gpie4_default: gpie4_default { |
| function = "GPIE4"; |
| groups = "GPIE4"; |
| }; |
| |
| pinctrl_gpie6_default: gpie6_default { |
| function = "GPIE6"; |
| groups = "GPIE6"; |
| }; |
| |
| pinctrl_i2c10_default: i2c10_default { |
| function = "I2C10"; |
| groups = "I2C10"; |
| }; |
| |
| pinctrl_i2c11_default: i2c11_default { |
| function = "I2C11"; |
| groups = "I2C11"; |
| }; |
| |
| pinctrl_i2c12_default: i2c12_default { |
| function = "I2C12"; |
| groups = "I2C12"; |
| }; |
| |
| pinctrl_i2c13_default: i2c13_default { |
| function = "I2C13"; |
| groups = "I2C13"; |
| }; |
| |
| pinctrl_i2c14_default: i2c14_default { |
| function = "I2C14"; |
| groups = "I2C14"; |
| }; |
| |
| pinctrl_i2c3_default: i2c3_default { |
| function = "I2C3"; |
| groups = "I2C3"; |
| }; |
| |
| pinctrl_i2c4_default: i2c4_default { |
| function = "I2C4"; |
| groups = "I2C4"; |
| }; |
| |
| pinctrl_i2c5_default: i2c5_default { |
| function = "I2C5"; |
| groups = "I2C5"; |
| }; |
| |
| pinctrl_i2c6_default: i2c6_default { |
| function = "I2C6"; |
| groups = "I2C6"; |
| }; |
| |
| pinctrl_i2c7_default: i2c7_default { |
| function = "I2C7"; |
| groups = "I2C7"; |
| }; |
| |
| pinctrl_i2c8_default: i2c8_default { |
| function = "I2C8"; |
| groups = "I2C8"; |
| }; |
| |
| pinctrl_i2c9_default: i2c9_default { |
| function = "I2C9"; |
| groups = "I2C9"; |
| }; |
| |
| pinctrl_lad0_default: lad0_default { |
| function = "LAD0"; |
| groups = "LAD0"; |
| }; |
| |
| pinctrl_lad1_default: lad1_default { |
| function = "LAD1"; |
| groups = "LAD1"; |
| }; |
| |
| pinctrl_lad2_default: lad2_default { |
| function = "LAD2"; |
| groups = "LAD2"; |
| }; |
| |
| pinctrl_lad3_default: lad3_default { |
| function = "LAD3"; |
| groups = "LAD3"; |
| }; |
| |
| pinctrl_lclk_default: lclk_default { |
| function = "LCLK"; |
| groups = "LCLK"; |
| }; |
| |
| pinctrl_lframe_default: lframe_default { |
| function = "LFRAME"; |
| groups = "LFRAME"; |
| }; |
| |
| pinctrl_lpchc_default: lpchc_default { |
| function = "LPCHC"; |
| groups = "LPCHC"; |
| }; |
| |
| pinctrl_lpcpd_default: lpcpd_default { |
| function = "LPCPD"; |
| groups = "LPCPD"; |
| }; |
| |
| pinctrl_lpcplus_default: lpcplus_default { |
| function = "LPCPLUS"; |
| groups = "LPCPLUS"; |
| }; |
| |
| pinctrl_lpcpme_default: lpcpme_default { |
| function = "LPCPME"; |
| groups = "LPCPME"; |
| }; |
| |
| pinctrl_lpcrst_default: lpcrst_default { |
| function = "LPCRST"; |
| groups = "LPCRST"; |
| }; |
| |
| pinctrl_lpcsmi_default: lpcsmi_default { |
| function = "LPCSMI"; |
| groups = "LPCSMI"; |
| }; |
| |
| pinctrl_lsirq_default: lsirq_default { |
| function = "LSIRQ"; |
| groups = "LSIRQ"; |
| }; |
| |
| pinctrl_mac1link_default: mac1link_default { |
| function = "MAC1LINK"; |
| groups = "MAC1LINK"; |
| }; |
| |
| pinctrl_mac2link_default: mac2link_default { |
| function = "MAC2LINK"; |
| groups = "MAC2LINK"; |
| }; |
| |
| pinctrl_mdio1_default: mdio1_default { |
| function = "MDIO1"; |
| groups = "MDIO1"; |
| }; |
| |
| pinctrl_mdio2_default: mdio2_default { |
| function = "MDIO2"; |
| groups = "MDIO2"; |
| }; |
| |
| pinctrl_ncts1_default: ncts1_default { |
| function = "NCTS1"; |
| groups = "NCTS1"; |
| }; |
| |
| pinctrl_ncts2_default: ncts2_default { |
| function = "NCTS2"; |
| groups = "NCTS2"; |
| }; |
| |
| pinctrl_ncts3_default: ncts3_default { |
| function = "NCTS3"; |
| groups = "NCTS3"; |
| }; |
| |
| pinctrl_ncts4_default: ncts4_default { |
| function = "NCTS4"; |
| groups = "NCTS4"; |
| }; |
| |
| pinctrl_ndcd1_default: ndcd1_default { |
| function = "NDCD1"; |
| groups = "NDCD1"; |
| }; |
| |
| pinctrl_ndcd2_default: ndcd2_default { |
| function = "NDCD2"; |
| groups = "NDCD2"; |
| }; |
| |
| pinctrl_ndcd3_default: ndcd3_default { |
| function = "NDCD3"; |
| groups = "NDCD3"; |
| }; |
| |
| pinctrl_ndcd4_default: ndcd4_default { |
| function = "NDCD4"; |
| groups = "NDCD4"; |
| }; |
| |
| pinctrl_ndsr1_default: ndsr1_default { |
| function = "NDSR1"; |
| groups = "NDSR1"; |
| }; |
| |
| pinctrl_ndsr2_default: ndsr2_default { |
| function = "NDSR2"; |
| groups = "NDSR2"; |
| }; |
| |
| pinctrl_ndsr3_default: ndsr3_default { |
| function = "NDSR3"; |
| groups = "NDSR3"; |
| }; |
| |
| pinctrl_ndsr4_default: ndsr4_default { |
| function = "NDSR4"; |
| groups = "NDSR4"; |
| }; |
| |
| pinctrl_ndtr1_default: ndtr1_default { |
| function = "NDTR1"; |
| groups = "NDTR1"; |
| }; |
| |
| pinctrl_ndtr2_default: ndtr2_default { |
| function = "NDTR2"; |
| groups = "NDTR2"; |
| }; |
| |
| pinctrl_ndtr3_default: ndtr3_default { |
| function = "NDTR3"; |
| groups = "NDTR3"; |
| }; |
| |
| pinctrl_ndtr4_default: ndtr4_default { |
| function = "NDTR4"; |
| groups = "NDTR4"; |
| }; |
| |
| pinctrl_nri1_default: nri1_default { |
| function = "NRI1"; |
| groups = "NRI1"; |
| }; |
| |
| pinctrl_nri2_default: nri2_default { |
| function = "NRI2"; |
| groups = "NRI2"; |
| }; |
| |
| pinctrl_nri3_default: nri3_default { |
| function = "NRI3"; |
| groups = "NRI3"; |
| }; |
| |
| pinctrl_nri4_default: nri4_default { |
| function = "NRI4"; |
| groups = "NRI4"; |
| }; |
| |
| pinctrl_nrts1_default: nrts1_default { |
| function = "NRTS1"; |
| groups = "NRTS1"; |
| }; |
| |
| pinctrl_nrts2_default: nrts2_default { |
| function = "NRTS2"; |
| groups = "NRTS2"; |
| }; |
| |
| pinctrl_nrts3_default: nrts3_default { |
| function = "NRTS3"; |
| groups = "NRTS3"; |
| }; |
| |
| pinctrl_nrts4_default: nrts4_default { |
| function = "NRTS4"; |
| groups = "NRTS4"; |
| }; |
| |
| pinctrl_oscclk_default: oscclk_default { |
| function = "OSCCLK"; |
| groups = "OSCCLK"; |
| }; |
| |
| pinctrl_pewake_default: pewake_default { |
| function = "PEWAKE"; |
| groups = "PEWAKE"; |
| }; |
| |
| pinctrl_pnor_default: pnor_default { |
| function = "PNOR"; |
| groups = "PNOR"; |
| }; |
| |
| pinctrl_pwm0_default: pwm0_default { |
| function = "PWM0"; |
| groups = "PWM0"; |
| }; |
| |
| pinctrl_pwm1_default: pwm1_default { |
| function = "PWM1"; |
| groups = "PWM1"; |
| }; |
| |
| pinctrl_pwm2_default: pwm2_default { |
| function = "PWM2"; |
| groups = "PWM2"; |
| }; |
| |
| pinctrl_pwm3_default: pwm3_default { |
| function = "PWM3"; |
| groups = "PWM3"; |
| }; |
| |
| pinctrl_pwm4_default: pwm4_default { |
| function = "PWM4"; |
| groups = "PWM4"; |
| }; |
| |
| pinctrl_pwm5_default: pwm5_default { |
| function = "PWM5"; |
| groups = "PWM5"; |
| }; |
| |
| pinctrl_pwm6_default: pwm6_default { |
| function = "PWM6"; |
| groups = "PWM6"; |
| }; |
| |
| pinctrl_pwm7_default: pwm7_default { |
| function = "PWM7"; |
| groups = "PWM7"; |
| }; |
| |
| pinctrl_rgmii1_default: rgmii1_default { |
| function = "RGMII1"; |
| groups = "RGMII1"; |
| }; |
| |
| pinctrl_rgmii2_default: rgmii2_default { |
| function = "RGMII2"; |
| groups = "RGMII2"; |
| }; |
| |
| pinctrl_rmii1_default: rmii1_default { |
| function = "RMII1"; |
| groups = "RMII1"; |
| }; |
| |
| pinctrl_rmii2_default: rmii2_default { |
| function = "RMII2"; |
| groups = "RMII2"; |
| }; |
| |
| pinctrl_rxd1_default: rxd1_default { |
| function = "RXD1"; |
| groups = "RXD1"; |
| }; |
| |
| pinctrl_rxd2_default: rxd2_default { |
| function = "RXD2"; |
| groups = "RXD2"; |
| }; |
| |
| pinctrl_rxd3_default: rxd3_default { |
| function = "RXD3"; |
| groups = "RXD3"; |
| }; |
| |
| pinctrl_rxd4_default: rxd4_default { |
| function = "RXD4"; |
| groups = "RXD4"; |
| }; |
| |
| pinctrl_salt1_default: salt1_default { |
| function = "SALT1"; |
| groups = "SALT1"; |
| }; |
| |
| pinctrl_salt10_default: salt10_default { |
| function = "SALT10"; |
| groups = "SALT10"; |
| }; |
| |
| pinctrl_salt11_default: salt11_default { |
| function = "SALT11"; |
| groups = "SALT11"; |
| }; |
| |
| pinctrl_salt12_default: salt12_default { |
| function = "SALT12"; |
| groups = "SALT12"; |
| }; |
| |
| pinctrl_salt13_default: salt13_default { |
| function = "SALT13"; |
| groups = "SALT13"; |
| }; |
| |
| pinctrl_salt14_default: salt14_default { |
| function = "SALT14"; |
| groups = "SALT14"; |
| }; |
| |
| pinctrl_salt2_default: salt2_default { |
| function = "SALT2"; |
| groups = "SALT2"; |
| }; |
| |
| pinctrl_salt3_default: salt3_default { |
| function = "SALT3"; |
| groups = "SALT3"; |
| }; |
| |
| pinctrl_salt4_default: salt4_default { |
| function = "SALT4"; |
| groups = "SALT4"; |
| }; |
| |
| pinctrl_salt5_default: salt5_default { |
| function = "SALT5"; |
| groups = "SALT5"; |
| }; |
| |
| pinctrl_salt6_default: salt6_default { |
| function = "SALT6"; |
| groups = "SALT6"; |
| }; |
| |
| pinctrl_salt7_default: salt7_default { |
| function = "SALT7"; |
| groups = "SALT7"; |
| }; |
| |
| pinctrl_salt8_default: salt8_default { |
| function = "SALT8"; |
| groups = "SALT8"; |
| }; |
| |
| pinctrl_salt9_default: salt9_default { |
| function = "SALT9"; |
| groups = "SALT9"; |
| }; |
| |
| pinctrl_scl1_default: scl1_default { |
| function = "SCL1"; |
| groups = "SCL1"; |
| }; |
| |
| pinctrl_scl2_default: scl2_default { |
| function = "SCL2"; |
| groups = "SCL2"; |
| }; |
| |
| pinctrl_sd1_default: sd1_default { |
| function = "SD1"; |
| groups = "SD1"; |
| }; |
| |
| pinctrl_sd2_default: sd2_default { |
| function = "SD2"; |
| groups = "SD2"; |
| }; |
| |
| pinctrl_sda1_default: sda1_default { |
| function = "SDA1"; |
| groups = "SDA1"; |
| }; |
| |
| pinctrl_sda2_default: sda2_default { |
| function = "SDA2"; |
| groups = "SDA2"; |
| }; |
| |
| pinctrl_sgpm_default: sgpm_default { |
| function = "SGPM"; |
| groups = "SGPM"; |
| }; |
| |
| pinctrl_sgps1_default: sgps1_default { |
| function = "SGPS1"; |
| groups = "SGPS1"; |
| }; |
| |
| pinctrl_sgps2_default: sgps2_default { |
| function = "SGPS2"; |
| groups = "SGPS2"; |
| }; |
| |
| pinctrl_sioonctrl_default: sioonctrl_default { |
| function = "SIOONCTRL"; |
| groups = "SIOONCTRL"; |
| }; |
| |
| pinctrl_siopbi_default: siopbi_default { |
| function = "SIOPBI"; |
| groups = "SIOPBI"; |
| }; |
| |
| pinctrl_siopbo_default: siopbo_default { |
| function = "SIOPBO"; |
| groups = "SIOPBO"; |
| }; |
| |
| pinctrl_siopwreq_default: siopwreq_default { |
| function = "SIOPWREQ"; |
| groups = "SIOPWREQ"; |
| }; |
| |
| pinctrl_siopwrgd_default: siopwrgd_default { |
| function = "SIOPWRGD"; |
| groups = "SIOPWRGD"; |
| }; |
| |
| pinctrl_sios3_default: sios3_default { |
| function = "SIOS3"; |
| groups = "SIOS3"; |
| }; |
| |
| pinctrl_sios5_default: sios5_default { |
| function = "SIOS5"; |
| groups = "SIOS5"; |
| }; |
| |
| pinctrl_siosci_default: siosci_default { |
| function = "SIOSCI"; |
| groups = "SIOSCI"; |
| }; |
| |
| pinctrl_spi1_default: spi1_default { |
| function = "SPI1"; |
| groups = "SPI1"; |
| }; |
| |
| pinctrl_spi1cs1_default: spi1cs1_default { |
| function = "SPI1CS1"; |
| groups = "SPI1CS1"; |
| }; |
| |
| pinctrl_spi1debug_default: spi1debug_default { |
| function = "SPI1DEBUG"; |
| groups = "SPI1DEBUG"; |
| }; |
| |
| pinctrl_spi1passthru_default: spi1passthru_default { |
| function = "SPI1PASSTHRU"; |
| groups = "SPI1PASSTHRU"; |
| }; |
| |
| pinctrl_spi2ck_default: spi2ck_default { |
| function = "SPI2CK"; |
| groups = "SPI2CK"; |
| }; |
| |
| pinctrl_spi2cs0_default: spi2cs0_default { |
| function = "SPI2CS0"; |
| groups = "SPI2CS0"; |
| }; |
| |
| pinctrl_spi2cs1_default: spi2cs1_default { |
| function = "SPI2CS1"; |
| groups = "SPI2CS1"; |
| }; |
| |
| pinctrl_spi2miso_default: spi2miso_default { |
| function = "SPI2MISO"; |
| groups = "SPI2MISO"; |
| }; |
| |
| pinctrl_spi2mosi_default: spi2mosi_default { |
| function = "SPI2MOSI"; |
| groups = "SPI2MOSI"; |
| }; |
| |
| pinctrl_timer3_default: timer3_default { |
| function = "TIMER3"; |
| groups = "TIMER3"; |
| }; |
| |
| pinctrl_timer4_default: timer4_default { |
| function = "TIMER4"; |
| groups = "TIMER4"; |
| }; |
| |
| pinctrl_timer5_default: timer5_default { |
| function = "TIMER5"; |
| groups = "TIMER5"; |
| }; |
| |
| pinctrl_timer6_default: timer6_default { |
| function = "TIMER6"; |
| groups = "TIMER6"; |
| }; |
| |
| pinctrl_timer7_default: timer7_default { |
| function = "TIMER7"; |
| groups = "TIMER7"; |
| }; |
| |
| pinctrl_timer8_default: timer8_default { |
| function = "TIMER8"; |
| groups = "TIMER8"; |
| }; |
| |
| pinctrl_txd1_default: txd1_default { |
| function = "TXD1"; |
| groups = "TXD1"; |
| }; |
| |
| pinctrl_txd2_default: txd2_default { |
| function = "TXD2"; |
| groups = "TXD2"; |
| }; |
| |
| pinctrl_txd3_default: txd3_default { |
| function = "TXD3"; |
| groups = "TXD3"; |
| }; |
| |
| pinctrl_txd4_default: txd4_default { |
| function = "TXD4"; |
| groups = "TXD4"; |
| }; |
| |
| pinctrl_uart6_default: uart6_default { |
| function = "UART6"; |
| groups = "UART6"; |
| }; |
| |
| pinctrl_usbcki_default: usbcki_default { |
| function = "USBCKI"; |
| groups = "USBCKI"; |
| }; |
| |
| pinctrl_usb2ah_default: usb2ah_default { |
| function = "USB2AH"; |
| groups = "USB2AH"; |
| }; |
| |
| pinctrl_usb2ad_default: usb2ad_default { |
| function = "USB2AD"; |
| groups = "USB2AD"; |
| }; |
| |
| pinctrl_usb11bhid_default: usb11bhid_default { |
| function = "USB11BHID"; |
| groups = "USB11BHID"; |
| }; |
| |
| pinctrl_usb2bh_default: usb2bh_default { |
| function = "USB2BH"; |
| groups = "USB2BH"; |
| }; |
| |
| pinctrl_vgabiosrom_default: vgabiosrom_default { |
| function = "VGABIOSROM"; |
| groups = "VGABIOSROM"; |
| }; |
| |
| pinctrl_vgahs_default: vgahs_default { |
| function = "VGAHS"; |
| groups = "VGAHS"; |
| }; |
| |
| pinctrl_vgavs_default: vgavs_default { |
| function = "VGAVS"; |
| groups = "VGAVS"; |
| }; |
| |
| pinctrl_vpi24_default: vpi24_default { |
| function = "VPI24"; |
| groups = "VPI24"; |
| }; |
| |
| pinctrl_vpo_default: vpo_default { |
| function = "VPO"; |
| groups = "VPO"; |
| }; |
| |
| pinctrl_wdtrst1_default: wdtrst1_default { |
| function = "WDTRST1"; |
| groups = "WDTRST1"; |
| }; |
| |
| pinctrl_wdtrst2_default: wdtrst2_default { |
| function = "WDTRST2"; |
| groups = "WDTRST2"; |
| }; |
| }; |
