| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (c) 2020 thingy.jp. |
| * Author: Daniel Palmer <daniel@thingy.jp> |
| */ |
| |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| interrupt-parent = <&gic>; |
| |
| cpus: cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0x0>; |
| }; |
| }; |
| |
| arch_timer { |
| compatible = "arm,armv7-timer"; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
| | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
| | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
| | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
| | IRQ_TYPE_LEVEL_LOW)>; |
| /* |
| * we shouldn't need this but the vendor |
| * u-boot is broken |
| */ |
| clock-frequency = <6000000>; |
| }; |
| |
| pmu: pmu { |
| compatible = "arm,cortex-a7-pmu"; |
| interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-affinity = <&cpu0>; |
| }; |
| |
| soc: soc { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x16001000 0x16001000 0x00007000>, |
| <0x1f000000 0x1f000000 0x00400000>, |
| <0xa0000000 0xa0000000 0x20000>; |
| |
| gic: interrupt-controller@16001000 { |
| compatible = "arm,cortex-a7-gic"; |
| reg = <0x16001000 0x1000>, |
| <0x16002000 0x2000>, |
| <0x16004000 0x2000>, |
| <0x16006000 0x2000>; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
| | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| |
| riu: bus@1f000000 { |
| compatible = "simple-bus"; |
| reg = <0x1f000000 0x00400000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x1f000000 0x00400000>; |
| |
| pmsleep: syscon@1c00 { |
| compatible = "mstar,msc313-pmsleep", "syscon"; |
| reg = <0x1c00 0x100>; |
| }; |
| |
| reboot { |
| compatible = "syscon-reboot"; |
| regmap = <&pmsleep>; |
| offset = <0xb8>; |
| mask = <0x79>; |
| }; |
| |
| intc_fiq: interrupt-controller@201310 { |
| compatible = "mstar,mst-intc"; |
| reg = <0x201310 0x40>; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| interrupt-parent = <&gic>; |
| mstar,irqs-map-range = <96 127>; |
| }; |
| |
| intc_irq: interrupt-controller@201350 { |
| compatible = "mstar,mst-intc"; |
| reg = <0x201350 0x40>; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| interrupt-parent = <&gic>; |
| mstar,irqs-map-range = <32 95>; |
| mstar,intc-no-eoi; |
| }; |
| |
| l3bridge: l3bridge@204400 { |
| compatible = "mstar,l3bridge"; |
| reg = <0x204400 0x200>; |
| }; |
| |
| gpio: gpio@207800 { |
| #gpio-cells = <2>; |
| reg = <0x207800 0x200>; |
| gpio-controller; |
| #interrupt-cells = <2>; |
| interrupt-controller; |
| interrupt-parent = <&intc_fiq>; |
| status = "disabled"; |
| }; |
| |
| pm_uart: uart@221000 { |
| compatible = "ns16550a"; |
| reg = <0x221000 0x100>; |
| reg-shift = <3>; |
| interrupts-extended = <&intc_irq GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <172000000>; |
| status = "disabled"; |
| }; |
| }; |
| |
| imi: sram@a0000000 { |
| compatible = "mmio-sram"; |
| reg = <0xa0000000 0x10000>; |
| }; |
| }; |
| }; |