| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Actions Semi S500 SoC |
| * |
| * Copyright (c) 2016-2017 Andreas Färber |
| */ |
| |
| #include <dt-bindings/clock/actions,s500-cmu.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/power/owl-s500-powergate.h> |
| #include <dt-bindings/reset/actions,s500-reset.h> |
| |
| / { |
| compatible = "actions,s500"; |
| interrupt-parent = <&gic>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| aliases { |
| }; |
| |
| chosen { |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a9"; |
| reg = <0x0>; |
| enable-method = "actions,s500-smp"; |
| }; |
| |
| cpu1: cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a9"; |
| reg = <0x1>; |
| enable-method = "actions,s500-smp"; |
| }; |
| |
| cpu2: cpu@2 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a9"; |
| reg = <0x2>; |
| enable-method = "actions,s500-smp"; |
| power-domains = <&sps S500_PD_CPU2>; |
| }; |
| |
| cpu3: cpu@3 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a9"; |
| reg = <0x3>; |
| enable-method = "actions,s500-smp"; |
| power-domains = <&sps S500_PD_CPU3>; |
| }; |
| }; |
| |
| arm-pmu { |
| compatible = "arm,cortex-a9-pmu"; |
| interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; |
| }; |
| |
| hosc: hosc { |
| compatible = "fixed-clock"; |
| clock-frequency = <24000000>; |
| #clock-cells = <0>; |
| }; |
| |
| losc: losc { |
| compatible = "fixed-clock"; |
| clock-frequency = <32768>; |
| #clock-cells = <0>; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| scu: scu@b0020000 { |
| compatible = "arm,cortex-a9-scu"; |
| reg = <0xb0020000 0x100>; |
| }; |
| |
| global_timer: timer@b0020200 { |
| compatible = "arm,cortex-a9-global-timer"; |
| reg = <0xb0020200 0x100>; |
| interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; |
| status = "disabled"; |
| }; |
| |
| twd_timer: timer@b0020600 { |
| compatible = "arm,cortex-a9-twd-timer"; |
| reg = <0xb0020600 0x20>; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; |
| status = "disabled"; |
| }; |
| |
| twd_wdt: wdt@b0020620 { |
| compatible = "arm,cortex-a9-twd-wdt"; |
| reg = <0xb0020620 0xe0>; |
| interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; |
| status = "disabled"; |
| }; |
| |
| gic: interrupt-controller@b0021000 { |
| compatible = "arm,cortex-a9-gic"; |
| reg = <0xb0021000 0x1000>, |
| <0xb0020100 0x0100>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| }; |
| |
| l2: cache-controller@b0022000 { |
| compatible = "arm,pl310-cache"; |
| reg = <0xb0022000 0x1000>; |
| cache-unified; |
| cache-level = <2>; |
| interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; |
| arm,tag-latency = <3 3 2>; |
| arm,data-latency = <5 3 3>; |
| }; |
| |
| uart0: serial@b0120000 { |
| compatible = "actions,s500-uart", "actions,owl-uart"; |
| reg = <0xb0120000 0x2000>; |
| interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cmu CLK_UART0>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@b0122000 { |
| compatible = "actions,s500-uart", "actions,owl-uart"; |
| reg = <0xb0122000 0x2000>; |
| interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cmu CLK_UART1>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@b0124000 { |
| compatible = "actions,s500-uart", "actions,owl-uart"; |
| reg = <0xb0124000 0x2000>; |
| interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cmu CLK_UART2>; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@b0126000 { |
| compatible = "actions,s500-uart", "actions,owl-uart"; |
| reg = <0xb0126000 0x2000>; |
| interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cmu CLK_UART3>; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@b0128000 { |
| compatible = "actions,s500-uart", "actions,owl-uart"; |
| reg = <0xb0128000 0x2000>; |
| interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cmu CLK_UART4>; |
| status = "disabled"; |
| }; |
| |
| uart5: serial@b012a000 { |
| compatible = "actions,s500-uart", "actions,owl-uart"; |
| reg = <0xb012a000 0x2000>; |
| interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cmu CLK_UART5>; |
| status = "disabled"; |
| }; |
| |
| uart6: serial@b012c000 { |
| compatible = "actions,s500-uart", "actions,owl-uart"; |
| reg = <0xb012c000 0x2000>; |
| interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cmu CLK_UART6>; |
| status = "disabled"; |
| }; |
| |
| cmu: clock-controller@b0160000 { |
| compatible = "actions,s500-cmu"; |
| reg = <0xb0160000 0x8000>; |
| clocks = <&hosc>, <&losc>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| i2c0: i2c@b0170000 { |
| compatible = "actions,s500-i2c"; |
| reg = <0xb0170000 0x4000>; |
| clocks = <&cmu CLK_I2C0>; |
| interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@b0174000 { |
| compatible = "actions,s500-i2c"; |
| reg = <0xb0174000 0x4000>; |
| clocks = <&cmu CLK_I2C1>; |
| interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@b0178000 { |
| compatible = "actions,s500-i2c"; |
| reg = <0xb0178000 0x4000>; |
| clocks = <&cmu CLK_I2C2>; |
| interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@b017c000 { |
| compatible = "actions,s500-i2c"; |
| reg = <0xb017c000 0x4000>; |
| clocks = <&cmu CLK_I2C3>; |
| interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| sirq: interrupt-controller@b01b0200 { |
| compatible = "actions,s500-sirq"; |
| reg = <0xb01b0200 0x4>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, /* SIRQ0 */ |
| <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, /* SIRQ1 */ |
| <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; /* SIRQ2 */ |
| }; |
| |
| timer: timer@b0168000 { |
| compatible = "actions,s500-timer"; |
| reg = <0xb0168000 0x8000>; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "2hz0", "2hz1", "timer0", "timer1"; |
| }; |
| |
| sps: power-controller@b01b0100 { |
| compatible = "actions,s500-sps"; |
| reg = <0xb01b0100 0x100>; |
| #power-domain-cells = <1>; |
| }; |
| |
| pinctrl: pinctrl@b01b0000 { |
| compatible = "actions,s500-pinctrl"; |
| reg = <0xb01b0000 0x40>, /* GPIO */ |
| <0xb01b0040 0x10>, /* Multiplexing Control */ |
| <0xb01b0060 0x18>, /* PAD Control */ |
| <0xb01b0080 0xc>; /* PAD Drive Capacity */ |
| clocks = <&cmu CLK_GPIO>; |
| gpio-controller; |
| gpio-ranges = <&pinctrl 0 0 132>; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, /* GPIOA */ |
| <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, /* GPIOB */ |
| <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, /* GPIOC */ |
| <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, /* GPIOD */ |
| <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; /* GPIOE */ |
| }; |
| |
| dma: dma-controller@b0260000 { |
| compatible = "actions,s500-dma"; |
| reg = <0xb0260000 0xd00>; |
| interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; |
| #dma-cells = <1>; |
| dma-channels = <12>; |
| dma-requests = <46>; |
| clocks = <&cmu CLK_DMAC>; |
| power-domains = <&sps S500_PD_DMA>; |
| }; |
| |
| mmc0: mmc@b0230000 { |
| compatible = "actions,s500-mmc", "actions,owl-mmc"; |
| reg = <0xb0230000 0x38>; |
| interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cmu CLK_SD0>; |
| resets = <&cmu RESET_SD0>; |
| dmas = <&dma 2>; |
| dma-names = "mmc"; |
| status = "disabled"; |
| }; |
| |
| mmc1: mmc@b0234000 { |
| compatible = "actions,s500-mmc", "actions,owl-mmc"; |
| reg = <0xb0234000 0x38>; |
| interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cmu CLK_SD1>; |
| resets = <&cmu RESET_SD1>; |
| dmas = <&dma 3>; |
| dma-names = "mmc"; |
| status = "disabled"; |
| }; |
| |
| mmc2: mmc@b0238000 { |
| compatible = "actions,s500-mmc", "actions,owl-mmc"; |
| reg = <0xb0238000 0x38>; |
| interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cmu CLK_SD2>; |
| resets = <&cmu RESET_SD2>; |
| dmas = <&dma 4>; |
| dma-names = "mmc"; |
| status = "disabled"; |
| }; |
| }; |
| }; |