arch/arm/boot/dts/zynq-ebaz4205.dts

// SPDX-License-Identifier: GPL-2.0
/*
 * Copyright (C) 2021 Michael Walle <michael@walle.cc>
 */
/dts-v1/;
/include/ "zynq-7000.dtsi"

/ {
	model = "Ebang EBAZ4205";
	compatible = "ebang,ebaz4205", "xlnx,zynq-7000";

	aliases {
		ethernet0 = &gem0;
		serial0 = &uart1;
	};

	memory@0 {
		device_type = "memory";
		reg = <0x0 0x10000000>;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};
};

&clkc {
	ps-clk-frequency = <33333333>;
	fclk-enable = <8>;
};

&gem0 {
	status = "okay";
	phy-mode = "mii";
	phy-handle = <&phy>;

	/* PHY clock */
	assigned-clocks = <&clkc 18>;
	assigned-clock-rates = <25000000>;

	phy: ethernet-phy@0 {
		reg = <0>;
	};
};

&gpio0 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_gpio0_default>;
};

&pinctrl0 {
	pinctrl_gpio0_default: gpio0-default {
		mux {
			groups = "gpio0_20_grp", "gpio0_32_grp";
			function = "gpio0";
		};

		conf {
			groups = "gpio0_20_grp", "gpio0_32_grp";
			io-standard = <3>;
			slew-rate = <0>;
		};

		conf-pull-up {
			pins = "MIO20", "MIO32";
			bias-disable;
		};
	};

	pinctrl_sdhci0_default: sdhci0-default {
		mux {
			groups = "sdio0_2_grp";
			function = "sdio0";
		};

		conf {
			groups = "sdio0_2_grp";
			io-standard = <3>;
			slew-rate = <0>;
			bias-disable;
		};

		mux-cd {
			groups = "gpio0_34_grp";
			function = "sdio0_cd";
		};

		conf-cd {
			groups = "gpio0_34_grp";
			io-standard = <3>;
			slew-rate = <0>;
			bias-high-impedance;
			bias-pull-up;
		};
	};

	pinctrl_uart1_default: uart1-default {
		mux {
			groups = "uart1_4_grp";
			function = "uart1";
		};

		conf {
			groups = "uart1_4_grp";
			io-standard = <3>;
			slew-rate = <0>;
		};

		conf-rx {
			pins = "MIO25";
			bias-high-impedance;
		};

		conf-tx {
			pins = "MIO24";
			bias-disable;
		};
	};
};

&sdhci0 {
	status = "okay";
	disable-wp;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_sdhci0_default>;
};

&uart1 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart1_default>;
};