| // SPDX-License-Identifier: BSD-3-Clause |
| /* |
| * Copyright (c) 2021, The Linux Foundation. All rights reserved. |
| * Copyright (c) 2022, Linaro Limited |
| */ |
| |
| #include <dt-bindings/clock/qcom,dispcc-sc8280xp.h> |
| #include <dt-bindings/clock/qcom,gcc-sc8280xp.h> |
| #include <dt-bindings/clock/qcom,gpucc-sc8280xp.h> |
| #include <dt-bindings/clock/qcom,rpmh.h> |
| #include <dt-bindings/clock/qcom,sc8280xp-camcc.h> |
| #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h> |
| #include <dt-bindings/interconnect/qcom,osm-l3.h> |
| #include <dt-bindings/interconnect/qcom,sc8280xp.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/mailbox/qcom-ipcc.h> |
| #include <dt-bindings/phy/phy-qcom-qmp.h> |
| #include <dt-bindings/power/qcom-rpmpd.h> |
| #include <dt-bindings/soc/qcom,gpr.h> |
| #include <dt-bindings/soc/qcom,rpmh-rsc.h> |
| #include <dt-bindings/sound/qcom,q6afe.h> |
| #include <dt-bindings/thermal/thermal.h> |
| |
| / { |
| interrupt-parent = <&intc>; |
| |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| clocks { |
| xo_board_clk: xo-board-clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| }; |
| |
| sleep_clk: sleep-clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <32764>; |
| }; |
| }; |
| |
| cpus { |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| CPU0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a78c"; |
| reg = <0x0 0x0>; |
| clocks = <&cpufreq_hw 0>; |
| enable-method = "psci"; |
| capacity-dmips-mhz = <602>; |
| next-level-cache = <&L2_0>; |
| power-domains = <&CPU_PD0>; |
| power-domain-names = "psci"; |
| qcom,freq-domain = <&cpufreq_hw 0>; |
| operating-points-v2 = <&cpu0_opp_table>; |
| interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; |
| #cooling-cells = <2>; |
| L2_0: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_0>; |
| L3_0: l3-cache { |
| compatible = "cache"; |
| cache-level = <3>; |
| cache-unified; |
| }; |
| }; |
| }; |
| |
| CPU1: cpu@100 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a78c"; |
| reg = <0x0 0x100>; |
| clocks = <&cpufreq_hw 0>; |
| enable-method = "psci"; |
| capacity-dmips-mhz = <602>; |
| next-level-cache = <&L2_100>; |
| power-domains = <&CPU_PD1>; |
| power-domain-names = "psci"; |
| qcom,freq-domain = <&cpufreq_hw 0>; |
| operating-points-v2 = <&cpu0_opp_table>; |
| interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; |
| #cooling-cells = <2>; |
| L2_100: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU2: cpu@200 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a78c"; |
| reg = <0x0 0x200>; |
| clocks = <&cpufreq_hw 0>; |
| enable-method = "psci"; |
| capacity-dmips-mhz = <602>; |
| next-level-cache = <&L2_200>; |
| power-domains = <&CPU_PD2>; |
| power-domain-names = "psci"; |
| qcom,freq-domain = <&cpufreq_hw 0>; |
| operating-points-v2 = <&cpu0_opp_table>; |
| interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; |
| #cooling-cells = <2>; |
| L2_200: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU3: cpu@300 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a78c"; |
| reg = <0x0 0x300>; |
| clocks = <&cpufreq_hw 0>; |
| enable-method = "psci"; |
| capacity-dmips-mhz = <602>; |
| next-level-cache = <&L2_300>; |
| power-domains = <&CPU_PD3>; |
| power-domain-names = "psci"; |
| qcom,freq-domain = <&cpufreq_hw 0>; |
| operating-points-v2 = <&cpu0_opp_table>; |
| interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; |
| #cooling-cells = <2>; |
| L2_300: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU4: cpu@400 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-x1c"; |
| reg = <0x0 0x400>; |
| clocks = <&cpufreq_hw 1>; |
| enable-method = "psci"; |
| capacity-dmips-mhz = <1024>; |
| next-level-cache = <&L2_400>; |
| power-domains = <&CPU_PD4>; |
| power-domain-names = "psci"; |
| qcom,freq-domain = <&cpufreq_hw 1>; |
| operating-points-v2 = <&cpu4_opp_table>; |
| interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; |
| #cooling-cells = <2>; |
| L2_400: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU5: cpu@500 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-x1c"; |
| reg = <0x0 0x500>; |
| clocks = <&cpufreq_hw 1>; |
| enable-method = "psci"; |
| capacity-dmips-mhz = <1024>; |
| next-level-cache = <&L2_500>; |
| power-domains = <&CPU_PD5>; |
| power-domain-names = "psci"; |
| qcom,freq-domain = <&cpufreq_hw 1>; |
| operating-points-v2 = <&cpu4_opp_table>; |
| interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; |
| #cooling-cells = <2>; |
| L2_500: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU6: cpu@600 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-x1c"; |
| reg = <0x0 0x600>; |
| clocks = <&cpufreq_hw 1>; |
| enable-method = "psci"; |
| capacity-dmips-mhz = <1024>; |
| next-level-cache = <&L2_600>; |
| power-domains = <&CPU_PD6>; |
| power-domain-names = "psci"; |
| qcom,freq-domain = <&cpufreq_hw 1>; |
| operating-points-v2 = <&cpu4_opp_table>; |
| interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; |
| #cooling-cells = <2>; |
| L2_600: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU7: cpu@700 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-x1c"; |
| reg = <0x0 0x700>; |
| clocks = <&cpufreq_hw 1>; |
| enable-method = "psci"; |
| capacity-dmips-mhz = <1024>; |
| next-level-cache = <&L2_700>; |
| power-domains = <&CPU_PD7>; |
| power-domain-names = "psci"; |
| qcom,freq-domain = <&cpufreq_hw 1>; |
| operating-points-v2 = <&cpu4_opp_table>; |
| interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; |
| #cooling-cells = <2>; |
| L2_700: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| cpu-map { |
| cluster0 { |
| core0 { |
| cpu = <&CPU0>; |
| }; |
| |
| core1 { |
| cpu = <&CPU1>; |
| }; |
| |
| core2 { |
| cpu = <&CPU2>; |
| }; |
| |
| core3 { |
| cpu = <&CPU3>; |
| }; |
| |
| core4 { |
| cpu = <&CPU4>; |
| }; |
| |
| core5 { |
| cpu = <&CPU5>; |
| }; |
| |
| core6 { |
| cpu = <&CPU6>; |
| }; |
| |
| core7 { |
| cpu = <&CPU7>; |
| }; |
| }; |
| }; |
| |
| idle-states { |
| entry-method = "psci"; |
| |
| LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { |
| compatible = "arm,idle-state"; |
| idle-state-name = "little-rail-power-collapse"; |
| arm,psci-suspend-param = <0x40000004>; |
| entry-latency-us = <355>; |
| exit-latency-us = <909>; |
| min-residency-us = <3934>; |
| local-timer-stop; |
| }; |
| |
| BIG_CPU_SLEEP_0: cpu-sleep-1-0 { |
| compatible = "arm,idle-state"; |
| idle-state-name = "big-rail-power-collapse"; |
| arm,psci-suspend-param = <0x40000004>; |
| entry-latency-us = <241>; |
| exit-latency-us = <1461>; |
| min-residency-us = <4488>; |
| local-timer-stop; |
| }; |
| }; |
| |
| domain-idle-states { |
| CLUSTER_SLEEP_0: cluster-sleep-0 { |
| compatible = "domain-idle-state"; |
| arm,psci-suspend-param = <0x4100c344>; |
| entry-latency-us = <3263>; |
| exit-latency-us = <6562>; |
| min-residency-us = <9987>; |
| }; |
| }; |
| }; |
| |
| firmware { |
| scm: scm { |
| compatible = "qcom,scm-sc8280xp", "qcom,scm"; |
| interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; |
| }; |
| }; |
| |
| aggre1_noc: interconnect-aggre1-noc { |
| compatible = "qcom,sc8280xp-aggre1-noc"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| aggre2_noc: interconnect-aggre2-noc { |
| compatible = "qcom,sc8280xp-aggre2-noc"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| clk_virt: interconnect-clk-virt { |
| compatible = "qcom,sc8280xp-clk-virt"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| config_noc: interconnect-config-noc { |
| compatible = "qcom,sc8280xp-config-noc"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| dc_noc: interconnect-dc-noc { |
| compatible = "qcom,sc8280xp-dc-noc"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| gem_noc: interconnect-gem-noc { |
| compatible = "qcom,sc8280xp-gem-noc"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| lpass_noc: interconnect-lpass-ag-noc { |
| compatible = "qcom,sc8280xp-lpass-ag-noc"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| mc_virt: interconnect-mc-virt { |
| compatible = "qcom,sc8280xp-mc-virt"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| mmss_noc: interconnect-mmss-noc { |
| compatible = "qcom,sc8280xp-mmss-noc"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| nspa_noc: interconnect-nspa-noc { |
| compatible = "qcom,sc8280xp-nspa-noc"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| nspb_noc: interconnect-nspb-noc { |
| compatible = "qcom,sc8280xp-nspb-noc"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| system_noc: interconnect-system-noc { |
| compatible = "qcom,sc8280xp-system-noc"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| memory@80000000 { |
| device_type = "memory"; |
| /* We expect the bootloader to fill in the size */ |
| reg = <0x0 0x80000000 0x0 0x0>; |
| }; |
| |
| cpu0_opp_table: opp-table-cpu0 { |
| compatible = "operating-points-v2"; |
| opp-shared; |
| |
| opp-300000000 { |
| opp-hz = /bits/ 64 <300000000>; |
| opp-peak-kBps = <(300000 * 32)>; |
| }; |
| opp-403200000 { |
| opp-hz = /bits/ 64 <403200000>; |
| opp-peak-kBps = <(384000 * 32)>; |
| }; |
| opp-499200000 { |
| opp-hz = /bits/ 64 <499200000>; |
| opp-peak-kBps = <(480000 * 32)>; |
| }; |
| opp-595200000 { |
| opp-hz = /bits/ 64 <595200000>; |
| opp-peak-kBps = <(576000 * 32)>; |
| }; |
| opp-691200000 { |
| opp-hz = /bits/ 64 <691200000>; |
| opp-peak-kBps = <(672000 * 32)>; |
| }; |
| opp-806400000 { |
| opp-hz = /bits/ 64 <806400000>; |
| opp-peak-kBps = <(768000 * 32)>; |
| }; |
| opp-902400000 { |
| opp-hz = /bits/ 64 <902400000>; |
| opp-peak-kBps = <(864000 * 32)>; |
| }; |
| opp-1017600000 { |
| opp-hz = /bits/ 64 <1017600000>; |
| opp-peak-kBps = <(960000 * 32)>; |
| }; |
| opp-1113600000 { |
| opp-hz = /bits/ 64 <1113600000>; |
| opp-peak-kBps = <(1075200 * 32)>; |
| }; |
| opp-1209600000 { |
| opp-hz = /bits/ 64 <1209600000>; |
| opp-peak-kBps = <(1171200 * 32)>; |
| }; |
| opp-1324800000 { |
| opp-hz = /bits/ 64 <1324800000>; |
| opp-peak-kBps = <(1267200 * 32)>; |
| }; |
| opp-1440000000 { |
| opp-hz = /bits/ 64 <1440000000>; |
| opp-peak-kBps = <(1363200 * 32)>; |
| }; |
| opp-1555200000 { |
| opp-hz = /bits/ 64 <1555200000>; |
| opp-peak-kBps = <(1536000 * 32)>; |
| }; |
| opp-1670400000 { |
| opp-hz = /bits/ 64 <1670400000>; |
| opp-peak-kBps = <(1612800 * 32)>; |
| }; |
| opp-1785600000 { |
| opp-hz = /bits/ 64 <1785600000>; |
| opp-peak-kBps = <(1689600 * 32)>; |
| }; |
| opp-1881600000 { |
| opp-hz = /bits/ 64 <1881600000>; |
| opp-peak-kBps = <(1689600 * 32)>; |
| }; |
| opp-1996800000 { |
| opp-hz = /bits/ 64 <1996800000>; |
| opp-peak-kBps = <(1689600 * 32)>; |
| }; |
| opp-2112000000 { |
| opp-hz = /bits/ 64 <2112000000>; |
| opp-peak-kBps = <(1689600 * 32)>; |
| }; |
| opp-2227200000 { |
| opp-hz = /bits/ 64 <2227200000>; |
| opp-peak-kBps = <(1689600 * 32)>; |
| }; |
| opp-2342400000 { |
| opp-hz = /bits/ 64 <2342400000>; |
| opp-peak-kBps = <(1689600 * 32)>; |
| }; |
| opp-2438400000 { |
| opp-hz = /bits/ 64 <2438400000>; |
| opp-peak-kBps = <(1689600 * 32)>; |
| }; |
| }; |
| |
| cpu4_opp_table: opp-table-cpu4 { |
| compatible = "operating-points-v2"; |
| opp-shared; |
| |
| opp-825600000 { |
| opp-hz = /bits/ 64 <825600000>; |
| opp-peak-kBps = <(768000 * 32)>; |
| }; |
| opp-940800000 { |
| opp-hz = /bits/ 64 <940800000>; |
| opp-peak-kBps = <(864000 * 32)>; |
| }; |
| opp-1056000000 { |
| opp-hz = /bits/ 64 <1056000000>; |
| opp-peak-kBps = <(960000 * 32)>; |
| }; |
| opp-1171200000 { |
| opp-hz = /bits/ 64 <1171200000>; |
| opp-peak-kBps = <(1171200 * 32)>; |
| }; |
| opp-1286400000 { |
| opp-hz = /bits/ 64 <1286400000>; |
| opp-peak-kBps = <(1267200 * 32)>; |
| }; |
| opp-1401600000 { |
| opp-hz = /bits/ 64 <1401600000>; |
| opp-peak-kBps = <(1363200 * 32)>; |
| }; |
| opp-1516800000 { |
| opp-hz = /bits/ 64 <1516800000>; |
| opp-peak-kBps = <(1459200 * 32)>; |
| }; |
| opp-1632000000 { |
| opp-hz = /bits/ 64 <1632000000>; |
| opp-peak-kBps = <(1612800 * 32)>; |
| }; |
| opp-1747200000 { |
| opp-hz = /bits/ 64 <1747200000>; |
| opp-peak-kBps = <(1689600 * 32)>; |
| }; |
| opp-1862400000 { |
| opp-hz = /bits/ 64 <1862400000>; |
| opp-peak-kBps = <(1689600 * 32)>; |
| }; |
| opp-1977600000 { |
| opp-hz = /bits/ 64 <1977600000>; |
| opp-peak-kBps = <(1689600 * 32)>; |
| }; |
| opp-2073600000 { |
| opp-hz = /bits/ 64 <2073600000>; |
| opp-peak-kBps = <(1689600 * 32)>; |
| }; |
| opp-2169600000 { |
| opp-hz = /bits/ 64 <2169600000>; |
| opp-peak-kBps = <(1689600 * 32)>; |
| }; |
| opp-2284800000 { |
| opp-hz = /bits/ 64 <2284800000>; |
| opp-peak-kBps = <(1689600 * 32)>; |
| }; |
| opp-2400000000 { |
| opp-hz = /bits/ 64 <2400000000>; |
| opp-peak-kBps = <(1689600 * 32)>; |
| }; |
| opp-2496000000 { |
| opp-hz = /bits/ 64 <2496000000>; |
| opp-peak-kBps = <(1689600 * 32)>; |
| }; |
| opp-2592000000 { |
| opp-hz = /bits/ 64 <2592000000>; |
| opp-peak-kBps = <(1689600 * 32)>; |
| }; |
| opp-2688000000 { |
| opp-hz = /bits/ 64 <2688000000>; |
| opp-peak-kBps = <(1689600 * 32)>; |
| }; |
| opp-2803200000 { |
| opp-hz = /bits/ 64 <2803200000>; |
| opp-peak-kBps = <(1689600 * 32)>; |
| }; |
| opp-2899200000 { |
| opp-hz = /bits/ 64 <2899200000>; |
| opp-peak-kBps = <(1689600 * 32)>; |
| }; |
| opp-2995200000 { |
| opp-hz = /bits/ 64 <2995200000>; |
| opp-peak-kBps = <(1689600 * 32)>; |
| }; |
| }; |
| |
| qup_opp_table_100mhz: opp-table-qup100mhz { |
| compatible = "operating-points-v2"; |
| |
| opp-75000000 { |
| opp-hz = /bits/ 64 <75000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| }; |
| |
| opp-100000000 { |
| opp-hz = /bits/ 64 <100000000>; |
| required-opps = <&rpmhpd_opp_svs>; |
| }; |
| }; |
| |
| pmu { |
| compatible = "arm,armv8-pmuv3"; |
| interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| psci { |
| compatible = "arm,psci-1.0"; |
| method = "smc"; |
| |
| CPU_PD0: power-domain-cpu0 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_PD>; |
| domain-idle-states = <&LITTLE_CPU_SLEEP_0>; |
| }; |
| |
| CPU_PD1: power-domain-cpu1 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_PD>; |
| domain-idle-states = <&LITTLE_CPU_SLEEP_0>; |
| }; |
| |
| CPU_PD2: power-domain-cpu2 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_PD>; |
| domain-idle-states = <&LITTLE_CPU_SLEEP_0>; |
| }; |
| |
| CPU_PD3: power-domain-cpu3 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_PD>; |
| domain-idle-states = <&LITTLE_CPU_SLEEP_0>; |
| }; |
| |
| CPU_PD4: power-domain-cpu4 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_PD>; |
| domain-idle-states = <&BIG_CPU_SLEEP_0>; |
| }; |
| |
| CPU_PD5: power-domain-cpu5 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_PD>; |
| domain-idle-states = <&BIG_CPU_SLEEP_0>; |
| }; |
| |
| CPU_PD6: power-domain-cpu6 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_PD>; |
| domain-idle-states = <&BIG_CPU_SLEEP_0>; |
| }; |
| |
| CPU_PD7: power-domain-cpu7 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_PD>; |
| domain-idle-states = <&BIG_CPU_SLEEP_0>; |
| }; |
| |
| CLUSTER_PD: power-domain-cpu-cluster0 { |
| #power-domain-cells = <0>; |
| domain-idle-states = <&CLUSTER_SLEEP_0>; |
| }; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| reserved-region@80000000 { |
| reg = <0 0x80000000 0 0x860000>; |
| no-map; |
| }; |
| |
| cmd_db: cmd-db-region@80860000 { |
| compatible = "qcom,cmd-db"; |
| reg = <0 0x80860000 0 0x20000>; |
| no-map; |
| }; |
| |
| reserved-region@80880000 { |
| reg = <0 0x80880000 0 0x80000>; |
| no-map; |
| }; |
| |
| smem_mem: smem-region@80900000 { |
| compatible = "qcom,smem"; |
| reg = <0 0x80900000 0 0x200000>; |
| no-map; |
| hwlocks = <&tcsr_mutex 3>; |
| }; |
| |
| reserved-region@80b00000 { |
| reg = <0 0x80b00000 0 0x100000>; |
| no-map; |
| }; |
| |
| reserved-region@83b00000 { |
| reg = <0 0x83b00000 0 0x1700000>; |
| no-map; |
| }; |
| |
| reserved-region@85b00000 { |
| reg = <0 0x85b00000 0 0xc00000>; |
| no-map; |
| }; |
| |
| pil_adsp_mem: adsp-region@86c00000 { |
| reg = <0 0x86c00000 0 0x2000000>; |
| no-map; |
| }; |
| |
| pil_nsp0_mem: cdsp0-region@8a100000 { |
| reg = <0 0x8a100000 0 0x1e00000>; |
| no-map; |
| }; |
| |
| pil_nsp1_mem: cdsp1-region@8c600000 { |
| reg = <0 0x8c600000 0 0x1e00000>; |
| no-map; |
| }; |
| |
| reserved-region@aeb00000 { |
| reg = <0 0xaeb00000 0 0x16600000>; |
| no-map; |
| }; |
| }; |
| |
| smp2p-adsp { |
| compatible = "qcom,smp2p"; |
| qcom,smem = <443>, <429>; |
| interrupts-extended = <&ipcc IPCC_CLIENT_LPASS |
| IPCC_MPROC_SIGNAL_SMP2P |
| IRQ_TYPE_EDGE_RISING>; |
| mboxes = <&ipcc IPCC_CLIENT_LPASS |
| IPCC_MPROC_SIGNAL_SMP2P>; |
| |
| qcom,local-pid = <0>; |
| qcom,remote-pid = <2>; |
| |
| smp2p_adsp_out: master-kernel { |
| qcom,entry-name = "master-kernel"; |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| smp2p_adsp_in: slave-kernel { |
| qcom,entry-name = "slave-kernel"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| smp2p-nsp0 { |
| compatible = "qcom,smp2p"; |
| qcom,smem = <94>, <432>; |
| interrupts-extended = <&ipcc IPCC_CLIENT_CDSP |
| IPCC_MPROC_SIGNAL_SMP2P |
| IRQ_TYPE_EDGE_RISING>; |
| mboxes = <&ipcc IPCC_CLIENT_CDSP |
| IPCC_MPROC_SIGNAL_SMP2P>; |
| |
| qcom,local-pid = <0>; |
| qcom,remote-pid = <5>; |
| |
| smp2p_nsp0_out: master-kernel { |
| qcom,entry-name = "master-kernel"; |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| smp2p_nsp0_in: slave-kernel { |
| qcom,entry-name = "slave-kernel"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| smp2p-nsp1 { |
| compatible = "qcom,smp2p"; |
| qcom,smem = <617>, <616>; |
| interrupts-extended = <&ipcc IPCC_CLIENT_NSP1 |
| IPCC_MPROC_SIGNAL_SMP2P |
| IRQ_TYPE_EDGE_RISING>; |
| mboxes = <&ipcc IPCC_CLIENT_NSP1 |
| IPCC_MPROC_SIGNAL_SMP2P>; |
| |
| qcom,local-pid = <0>; |
| qcom,remote-pid = <12>; |
| |
| smp2p_nsp1_out: master-kernel { |
| qcom,entry-name = "master-kernel"; |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| smp2p_nsp1_in: slave-kernel { |
| qcom,entry-name = "slave-kernel"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| soc: soc@0 { |
| compatible = "simple-bus"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges = <0 0 0 0 0x10 0>; |
| dma-ranges = <0 0 0 0 0x10 0>; |
| |
| ethernet0: ethernet@20000 { |
| compatible = "qcom,sc8280xp-ethqos"; |
| reg = <0x0 0x00020000 0x0 0x10000>, |
| <0x0 0x00036000 0x0 0x100>; |
| reg-names = "stmmaceth", "rgmii"; |
| |
| clocks = <&gcc GCC_EMAC0_AXI_CLK>, |
| <&gcc GCC_EMAC0_SLV_AHB_CLK>, |
| <&gcc GCC_EMAC0_PTP_CLK>, |
| <&gcc GCC_EMAC0_RGMII_CLK>; |
| clock-names = "stmmaceth", |
| "pclk", |
| "ptp_ref", |
| "rgmii"; |
| |
| interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 936 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "macirq", "eth_lpi"; |
| |
| iommus = <&apps_smmu 0x4c0 0xf>; |
| power-domains = <&gcc EMAC_0_GDSC>; |
| |
| snps,tso; |
| snps,pbl = <32>; |
| rx-fifo-depth = <4096>; |
| tx-fifo-depth = <4096>; |
| |
| status = "disabled"; |
| }; |
| |
| gcc: clock-controller@100000 { |
| compatible = "qcom,gcc-sc8280xp"; |
| reg = <0x0 0x00100000 0x0 0x1f0000>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| #power-domain-cells = <1>; |
| clocks = <&rpmhcc RPMH_CXO_CLK>, |
| <&sleep_clk>, |
| <0>, |
| <0>, |
| <0>, |
| <0>, |
| <0>, |
| <0>, |
| <&usb_0_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, |
| <0>, |
| <0>, |
| <0>, |
| <0>, |
| <0>, |
| <0>, |
| <0>, |
| <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, |
| <0>, |
| <0>, |
| <0>, |
| <0>, |
| <0>, |
| <0>, |
| <0>, |
| <0>, |
| <0>, |
| <&pcie2a_phy>, |
| <&pcie2b_phy>, |
| <&pcie3a_phy>, |
| <&pcie3b_phy>, |
| <&pcie4_phy>, |
| <0>, |
| <0>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| }; |
| |
| ipcc: mailbox@408000 { |
| compatible = "qcom,sc8280xp-ipcc", "qcom,ipcc"; |
| reg = <0 0x00408000 0 0x1000>; |
| interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| #mbox-cells = <2>; |
| }; |
| |
| qup2: geniqup@8c0000 { |
| compatible = "qcom,geni-se-qup"; |
| reg = <0 0x008c0000 0 0x2000>; |
| clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, |
| <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; |
| clock-names = "m-ahb", "s-ahb"; |
| iommus = <&apps_smmu 0xa3 0>; |
| |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| status = "disabled"; |
| |
| i2c16: i2c@880000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00880000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, |
| <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| spi16: spi@880000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00880000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, |
| <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| i2c17: i2c@884000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00884000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, |
| <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| spi17: spi@884000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00884000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, |
| <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| uart17: serial@884000 { |
| compatible = "qcom,geni-uart"; |
| reg = <0 0x00884000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; |
| operating-points-v2 = <&qup_opp_table_100mhz>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>; |
| interconnect-names = "qup-core", "qup-config"; |
| status = "disabled"; |
| }; |
| |
| i2c18: i2c@888000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00888000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, |
| <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| spi18: spi@888000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00888000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, |
| <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| i2c19: i2c@88c000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x0088c000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, |
| <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| spi19: spi@88c000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x0088c000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, |
| <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| i2c20: i2c@890000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00890000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, |
| <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| spi20: spi@890000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00890000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, |
| <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| i2c21: i2c@894000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00894000 0 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; |
| interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, |
| <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| spi21: spi@894000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00894000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, |
| <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| i2c22: i2c@898000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00898000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; |
| interrupts = <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, |
| <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| spi22: spi@898000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00898000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, |
| <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| i2c23: i2c@89c000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x0089c000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; |
| interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, |
| <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| spi23: spi@89c000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x0089c000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, |
| <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| }; |
| |
| qup0: geniqup@9c0000 { |
| compatible = "qcom,geni-se-qup"; |
| reg = <0 0x009c0000 0 0x6000>; |
| clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, |
| <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; |
| clock-names = "m-ahb", "s-ahb"; |
| iommus = <&apps_smmu 0x563 0>; |
| |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| status = "disabled"; |
| |
| i2c0: i2c@980000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00980000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; |
| interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, |
| <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| spi0: spi@980000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00980000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, |
| <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@984000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00984000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; |
| interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, |
| <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@984000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00984000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, |
| <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@988000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00988000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; |
| interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, |
| <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| spi2: spi@988000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00988000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, |
| <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@988000 { |
| compatible = "qcom,geni-uart"; |
| reg = <0 0x00988000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; |
| operating-points-v2 = <&qup_opp_table_100mhz>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; |
| interconnect-names = "qup-core", "qup-config"; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@98c000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x0098c000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; |
| interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, |
| <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| spi3: spi@98c000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x0098c000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, |
| <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| i2c4: i2c@990000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00990000 0 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; |
| interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, |
| <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| spi4: spi@990000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00990000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, |
| <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| i2c5: i2c@994000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00994000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; |
| interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, |
| <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| spi5: spi@994000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00994000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, |
| <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| i2c6: i2c@998000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00998000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; |
| interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, |
| <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| spi6: spi@998000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00998000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, |
| <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| i2c7: i2c@99c000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x0099c000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; |
| interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, |
| <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| spi7: spi@99c000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x0099c000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, |
| <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| }; |
| |
| qup1: geniqup@ac0000 { |
| compatible = "qcom,geni-se-qup"; |
| reg = <0 0x00ac0000 0 0x6000>; |
| clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, |
| <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; |
| clock-names = "m-ahb", "s-ahb"; |
| iommus = <&apps_smmu 0x83 0>; |
| |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| status = "disabled"; |
| |
| i2c8: i2c@a80000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00a80000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, |
| <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| spi8: spi@a80000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00a80000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, |
| <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| i2c9: i2c@a84000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00a84000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, |
| <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| spi9: spi@a84000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00a84000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, |
| <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| i2c10: i2c@a88000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00a88000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, |
| <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| spi10: spi@a88000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00a88000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, |
| <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| i2c11: i2c@a8c000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00a8c000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, |
| <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| spi11: spi@a8c000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00a8c000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, |
| <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| i2c12: i2c@a90000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00a90000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, |
| <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| spi12: spi@a90000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00a90000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, |
| <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| i2c13: i2c@a94000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00a94000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, |
| <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| spi13: spi@a94000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00a94000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, |
| <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| i2c14: i2c@a98000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00a98000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, |
| <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| spi14: spi@a98000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00a98000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, |
| <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| i2c15: i2c@a9c000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00a9c000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, |
| <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| |
| spi15: spi@a9c000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00a9c000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, |
| <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| status = "disabled"; |
| }; |
| }; |
| |
| rng: rng@10d3000 { |
| compatible = "qcom,prng-ee"; |
| reg = <0 0x010d3000 0 0x1000>; |
| clocks = <&rpmhcc RPMH_HWKM_CLK>; |
| clock-names = "core"; |
| }; |
| |
| pcie4: pcie@1c00000 { |
| device_type = "pci"; |
| compatible = "qcom,pcie-sc8280xp"; |
| reg = <0x0 0x01c00000 0x0 0x3000>, |
| <0x0 0x30000000 0x0 0xf1d>, |
| <0x0 0x30000f20 0x0 0xa8>, |
| <0x0 0x30001000 0x0 0x1000>, |
| <0x0 0x30100000 0x0 0x100000>, |
| <0x0 0x01c03000 0x0 0x1000>; |
| reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges = <0x01000000 0x0 0x00000000 0x0 0x30200000 0x0 0x100000>, |
| <0x02000000 0x0 0x30300000 0x0 0x30300000 0x0 0x1d00000>; |
| bus-range = <0x00 0xff>; |
| |
| dma-coherent; |
| |
| linux,pci-domain = <6>; |
| num-lanes = <1>; |
| |
| interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "msi0", "msi1", "msi2", "msi3"; |
| |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0x7>; |
| interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_PCIE_4_AUX_CLK>, |
| <&gcc GCC_PCIE_4_CFG_AHB_CLK>, |
| <&gcc GCC_PCIE_4_MSTR_AXI_CLK>, |
| <&gcc GCC_PCIE_4_SLV_AXI_CLK>, |
| <&gcc GCC_PCIE_4_SLV_Q2A_AXI_CLK>, |
| <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, |
| <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>, |
| <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>, |
| <&gcc GCC_CNOC_PCIE4_QX_CLK>; |
| clock-names = "aux", |
| "cfg", |
| "bus_master", |
| "bus_slave", |
| "slave_q2a", |
| "ddrss_sf_tbu", |
| "noc_aggr_4", |
| "noc_aggr_south_sf", |
| "cnoc_qx"; |
| |
| assigned-clocks = <&gcc GCC_PCIE_4_AUX_CLK>; |
| assigned-clock-rates = <19200000>; |
| |
| interconnects = <&aggre2_noc MASTER_PCIE_4 0 &mc_virt SLAVE_EBI1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_4 0>; |
| interconnect-names = "pcie-mem", "cpu-pcie"; |
| |
| resets = <&gcc GCC_PCIE_4_BCR>; |
| reset-names = "pci"; |
| |
| power-domains = <&gcc PCIE_4_GDSC>; |
| |
| phys = <&pcie4_phy>; |
| phy-names = "pciephy"; |
| |
| status = "disabled"; |
| }; |
| |
| pcie4_phy: phy@1c06000 { |
| compatible = "qcom,sc8280xp-qmp-gen3x1-pcie-phy"; |
| reg = <0x0 0x01c06000 0x0 0x2000>; |
| |
| clocks = <&gcc GCC_PCIE_4_AUX_CLK>, |
| <&gcc GCC_PCIE_4_CFG_AHB_CLK>, |
| <&gcc GCC_PCIE_4_CLKREF_CLK>, |
| <&gcc GCC_PCIE4_PHY_RCHNG_CLK>, |
| <&gcc GCC_PCIE_4_PIPE_CLK>, |
| <&gcc GCC_PCIE_4_PIPEDIV2_CLK>; |
| clock-names = "aux", "cfg_ahb", "ref", "rchng", |
| "pipe", "pipediv2"; |
| |
| assigned-clocks = <&gcc GCC_PCIE4_PHY_RCHNG_CLK>; |
| assigned-clock-rates = <100000000>; |
| |
| power-domains = <&gcc PCIE_4_GDSC>; |
| |
| resets = <&gcc GCC_PCIE_4_PHY_BCR>; |
| reset-names = "phy"; |
| |
| #clock-cells = <0>; |
| clock-output-names = "pcie_4_pipe_clk"; |
| |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| pcie3b: pcie@1c08000 { |
| device_type = "pci"; |
| compatible = "qcom,pcie-sc8280xp"; |
| reg = <0x0 0x01c08000 0x0 0x3000>, |
| <0x0 0x32000000 0x0 0xf1d>, |
| <0x0 0x32000f20 0x0 0xa8>, |
| <0x0 0x32001000 0x0 0x1000>, |
| <0x0 0x32100000 0x0 0x100000>, |
| <0x0 0x01c0b000 0x0 0x1000>; |
| reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges = <0x01000000 0x0 0x00000000 0x0 0x32200000 0x0 0x100000>, |
| <0x02000000 0x0 0x32300000 0x0 0x32300000 0x0 0x1d00000>; |
| bus-range = <0x00 0xff>; |
| |
| dma-coherent; |
| |
| linux,pci-domain = <5>; |
| num-lanes = <2>; |
| |
| interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "msi0", "msi1", "msi2", "msi3"; |
| |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0x7>; |
| interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 526 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 2 &intc 0 0 GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 3 &intc 0 0 GIC_SPI 528 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 4 &intc 0 0 GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_PCIE_3B_AUX_CLK>, |
| <&gcc GCC_PCIE_3B_CFG_AHB_CLK>, |
| <&gcc GCC_PCIE_3B_MSTR_AXI_CLK>, |
| <&gcc GCC_PCIE_3B_SLV_AXI_CLK>, |
| <&gcc GCC_PCIE_3B_SLV_Q2A_AXI_CLK>, |
| <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, |
| <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>, |
| <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>; |
| clock-names = "aux", |
| "cfg", |
| "bus_master", |
| "bus_slave", |
| "slave_q2a", |
| "ddrss_sf_tbu", |
| "noc_aggr_4", |
| "noc_aggr_south_sf"; |
| |
| assigned-clocks = <&gcc GCC_PCIE_3B_AUX_CLK>; |
| assigned-clock-rates = <19200000>; |
| |
| interconnects = <&aggre2_noc MASTER_PCIE_3B 0 &mc_virt SLAVE_EBI1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_3B 0>; |
| interconnect-names = "pcie-mem", "cpu-pcie"; |
| |
| resets = <&gcc GCC_PCIE_3B_BCR>; |
| reset-names = "pci"; |
| |
| power-domains = <&gcc PCIE_3B_GDSC>; |
| |
| phys = <&pcie3b_phy>; |
| phy-names = "pciephy"; |
| |
| status = "disabled"; |
| }; |
| |
| pcie3b_phy: phy@1c0e000 { |
| compatible = "qcom,sc8280xp-qmp-gen3x2-pcie-phy"; |
| reg = <0x0 0x01c0e000 0x0 0x2000>; |
| |
| clocks = <&gcc GCC_PCIE_3B_AUX_CLK>, |
| <&gcc GCC_PCIE_3B_CFG_AHB_CLK>, |
| <&gcc GCC_PCIE_3A3B_CLKREF_CLK>, |
| <&gcc GCC_PCIE3B_PHY_RCHNG_CLK>, |
| <&gcc GCC_PCIE_3B_PIPE_CLK>, |
| <&gcc GCC_PCIE_3B_PIPEDIV2_CLK>; |
| clock-names = "aux", "cfg_ahb", "ref", "rchng", |
| "pipe", "pipediv2"; |
| |
| assigned-clocks = <&gcc GCC_PCIE3B_PHY_RCHNG_CLK>; |
| assigned-clock-rates = <100000000>; |
| |
| power-domains = <&gcc PCIE_3B_GDSC>; |
| |
| resets = <&gcc GCC_PCIE_3B_PHY_BCR>; |
| reset-names = "phy"; |
| |
| #clock-cells = <0>; |
| clock-output-names = "pcie_3b_pipe_clk"; |
| |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| pcie3a: pcie@1c10000 { |
| device_type = "pci"; |
| compatible = "qcom,pcie-sc8280xp"; |
| reg = <0x0 0x01c10000 0x0 0x3000>, |
| <0x0 0x34000000 0x0 0xf1d>, |
| <0x0 0x34000f20 0x0 0xa8>, |
| <0x0 0x34001000 0x0 0x1000>, |
| <0x0 0x34100000 0x0 0x100000>, |
| <0x0 0x01c13000 0x0 0x1000>; |
| reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges = <0x01000000 0x0 0x00000000 0x0 0x34200000 0x0 0x100000>, |
| <0x02000000 0x0 0x34300000 0x0 0x34300000 0x0 0x1d00000>; |
| bus-range = <0x00 0xff>; |
| |
| dma-coherent; |
| |
| linux,pci-domain = <4>; |
| num-lanes = <4>; |
| |
| interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "msi0", "msi1", "msi2", "msi3"; |
| |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0x7>; |
| interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 2 &intc 0 0 GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 3 &intc 0 0 GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 4 &intc 0 0 GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_PCIE_3A_AUX_CLK>, |
| <&gcc GCC_PCIE_3A_CFG_AHB_CLK>, |
| <&gcc GCC_PCIE_3A_MSTR_AXI_CLK>, |
| <&gcc GCC_PCIE_3A_SLV_AXI_CLK>, |
| <&gcc GCC_PCIE_3A_SLV_Q2A_AXI_CLK>, |
| <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, |
| <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>, |
| <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>; |
| clock-names = "aux", |
| "cfg", |
| "bus_master", |
| "bus_slave", |
| "slave_q2a", |
| "ddrss_sf_tbu", |
| "noc_aggr_4", |
| "noc_aggr_south_sf"; |
| |
| assigned-clocks = <&gcc GCC_PCIE_3A_AUX_CLK>; |
| assigned-clock-rates = <19200000>; |
| |
| interconnects = <&aggre2_noc MASTER_PCIE_3A 0 &mc_virt SLAVE_EBI1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_3A 0>; |
| interconnect-names = "pcie-mem", "cpu-pcie"; |
| |
| resets = <&gcc GCC_PCIE_3A_BCR>; |
| reset-names = "pci"; |
| |
| power-domains = <&gcc PCIE_3A_GDSC>; |
| |
| phys = <&pcie3a_phy>; |
| phy-names = "pciephy"; |
| |
| status = "disabled"; |
| }; |
| |
| pcie3a_phy: phy@1c14000 { |
| compatible = "qcom,sc8280xp-qmp-gen3x4-pcie-phy"; |
| reg = <0x0 0x01c14000 0x0 0x2000>, |
| <0x0 0x01c16000 0x0 0x2000>; |
| |
| clocks = <&gcc GCC_PCIE_3A_AUX_CLK>, |
| <&gcc GCC_PCIE_3A_CFG_AHB_CLK>, |
| <&gcc GCC_PCIE_3A3B_CLKREF_CLK>, |
| <&gcc GCC_PCIE3A_PHY_RCHNG_CLK>, |
| <&gcc GCC_PCIE_3A_PIPE_CLK>, |
| <&gcc GCC_PCIE_3A_PIPEDIV2_CLK>; |
| clock-names = "aux", "cfg_ahb", "ref", "rchng", |
| "pipe", "pipediv2"; |
| |
| assigned-clocks = <&gcc GCC_PCIE3A_PHY_RCHNG_CLK>; |
| assigned-clock-rates = <100000000>; |
| |
| power-domains = <&gcc PCIE_3A_GDSC>; |
| |
| resets = <&gcc GCC_PCIE_3A_PHY_BCR>; |
| reset-names = "phy"; |
| |
| qcom,4ln-config-sel = <&tcsr 0xa044 1>; |
| |
| #clock-cells = <0>; |
| clock-output-names = "pcie_3a_pipe_clk"; |
| |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| pcie2b: pcie@1c18000 { |
| device_type = "pci"; |
| compatible = "qcom,pcie-sc8280xp"; |
| reg = <0x0 0x01c18000 0x0 0x3000>, |
| <0x0 0x38000000 0x0 0xf1d>, |
| <0x0 0x38000f20 0x0 0xa8>, |
| <0x0 0x38001000 0x0 0x1000>, |
| <0x0 0x38100000 0x0 0x100000>, |
| <0x0 0x01c1b000 0x0 0x1000>; |
| reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges = <0x01000000 0x0 0x00000000 0x0 0x38200000 0x0 0x100000>, |
| <0x02000000 0x0 0x38300000 0x0 0x38300000 0x0 0x1d00000>; |
| bus-range = <0x00 0xff>; |
| |
| dma-coherent; |
| |
| linux,pci-domain = <3>; |
| num-lanes = <2>; |
| |
| interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "msi0", "msi1", "msi2", "msi3"; |
| |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0x7>; |
| interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 2 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 3 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 4 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_PCIE_2B_AUX_CLK>, |
| <&gcc GCC_PCIE_2B_CFG_AHB_CLK>, |
| <&gcc GCC_PCIE_2B_MSTR_AXI_CLK>, |
| <&gcc GCC_PCIE_2B_SLV_AXI_CLK>, |
| <&gcc GCC_PCIE_2B_SLV_Q2A_AXI_CLK>, |
| <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, |
| <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>, |
| <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>; |
| clock-names = "aux", |
| "cfg", |
| "bus_master", |
| "bus_slave", |
| "slave_q2a", |
| "ddrss_sf_tbu", |
| "noc_aggr_4", |
| "noc_aggr_south_sf"; |
| |
| assigned-clocks = <&gcc GCC_PCIE_2B_AUX_CLK>; |
| assigned-clock-rates = <19200000>; |
| |
| interconnects = <&aggre2_noc MASTER_PCIE_2B 0 &mc_virt SLAVE_EBI1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_2B 0>; |
| interconnect-names = "pcie-mem", "cpu-pcie"; |
| |
| resets = <&gcc GCC_PCIE_2B_BCR>; |
| reset-names = "pci"; |
| |
| power-domains = <&gcc PCIE_2B_GDSC>; |
| |
| phys = <&pcie2b_phy>; |
| phy-names = "pciephy"; |
| |
| status = "disabled"; |
| }; |
| |
| pcie2b_phy: phy@1c1e000 { |
| compatible = "qcom,sc8280xp-qmp-gen3x2-pcie-phy"; |
| reg = <0x0 0x01c1e000 0x0 0x2000>; |
| |
| clocks = <&gcc GCC_PCIE_2B_AUX_CLK>, |
| <&gcc GCC_PCIE_2B_CFG_AHB_CLK>, |
| <&gcc GCC_PCIE_2A2B_CLKREF_CLK>, |
| <&gcc GCC_PCIE2B_PHY_RCHNG_CLK>, |
| <&gcc GCC_PCIE_2B_PIPE_CLK>, |
| <&gcc GCC_PCIE_2B_PIPEDIV2_CLK>; |
| clock-names = "aux", "cfg_ahb", "ref", "rchng", |
| "pipe", "pipediv2"; |
| |
| assigned-clocks = <&gcc GCC_PCIE2B_PHY_RCHNG_CLK>; |
| assigned-clock-rates = <100000000>; |
| |
| power-domains = <&gcc PCIE_2B_GDSC>; |
| |
| resets = <&gcc GCC_PCIE_2B_PHY_BCR>; |
| reset-names = "phy"; |
| |
| #clock-cells = <0>; |
| clock-output-names = "pcie_2b_pipe_clk"; |
| |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| pcie2a: pcie@1c20000 { |
| device_type = "pci"; |
| compatible = "qcom,pcie-sc8280xp"; |
| reg = <0x0 0x01c20000 0x0 0x3000>, |
| <0x0 0x3c000000 0x0 0xf1d>, |
| <0x0 0x3c000f20 0x0 0xa8>, |
| <0x0 0x3c001000 0x0 0x1000>, |
| <0x0 0x3c100000 0x0 0x100000>, |
| <0x0 0x01c23000 0x0 0x1000>; |
| reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges = <0x01000000 0x0 0x00000000 0x0 0x3c200000 0x0 0x100000>, |
| <0x02000000 0x0 0x3c300000 0x0 0x3c300000 0x0 0x1d00000>; |
| bus-range = <0x00 0xff>; |
| |
| dma-coherent; |
| |
| linux,pci-domain = <2>; |
| num-lanes = <4>; |
| |
| interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 524 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 525 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "msi0", "msi1", "msi2", "msi3"; |
| |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0x7>; |
| interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 2 &intc 0 0 GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 3 &intc 0 0 GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 4 &intc 0 0 GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_PCIE_2A_AUX_CLK>, |
| <&gcc GCC_PCIE_2A_CFG_AHB_CLK>, |
| <&gcc GCC_PCIE_2A_MSTR_AXI_CLK>, |
| <&gcc GCC_PCIE_2A_SLV_AXI_CLK>, |
| <&gcc GCC_PCIE_2A_SLV_Q2A_AXI_CLK>, |
| <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, |
| <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>, |
| <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>; |
| clock-names = "aux", |
| "cfg", |
| "bus_master", |
| "bus_slave", |
| "slave_q2a", |
| "ddrss_sf_tbu", |
| "noc_aggr_4", |
| "noc_aggr_south_sf"; |
| |
| assigned-clocks = <&gcc GCC_PCIE_2A_AUX_CLK>; |
| assigned-clock-rates = <19200000>; |
| |
| interconnects = <&aggre2_noc MASTER_PCIE_2A 0 &mc_virt SLAVE_EBI1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_2A 0>; |
| interconnect-names = "pcie-mem", "cpu-pcie"; |
| |
| resets = <&gcc GCC_PCIE_2A_BCR>; |
| reset-names = "pci"; |
| |
| power-domains = <&gcc PCIE_2A_GDSC>; |
| |
| phys = <&pcie2a_phy>; |
| phy-names = "pciephy"; |
| |
| status = "disabled"; |
| }; |
| |
| pcie2a_phy: phy@1c24000 { |
| compatible = "qcom,sc8280xp-qmp-gen3x4-pcie-phy"; |
| reg = <0x0 0x01c24000 0x0 0x2000>, |
| <0x0 0x01c26000 0x0 0x2000>; |
| |
| clocks = <&gcc GCC_PCIE_2A_AUX_CLK>, |
| <&gcc GCC_PCIE_2A_CFG_AHB_CLK>, |
| <&gcc GCC_PCIE_2A2B_CLKREF_CLK>, |
| <&gcc GCC_PCIE2A_PHY_RCHNG_CLK>, |
| <&gcc GCC_PCIE_2A_PIPE_CLK>, |
| <&gcc GCC_PCIE_2A_PIPEDIV2_CLK>; |
| clock-names = "aux", "cfg_ahb", "ref", "rchng", |
| "pipe", "pipediv2"; |
| |
| assigned-clocks = <&gcc GCC_PCIE2A_PHY_RCHNG_CLK>; |
| assigned-clock-rates = <100000000>; |
| |
| power-domains = <&gcc PCIE_2A_GDSC>; |
| |
| resets = <&gcc GCC_PCIE_2A_PHY_BCR>; |
| reset-names = "phy"; |
| |
| qcom,4ln-config-sel = <&tcsr 0xa044 0>; |
| |
| #clock-cells = <0>; |
| clock-output-names = "pcie_2a_pipe_clk"; |
| |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| ufs_mem_hc: ufs@1d84000 { |
| compatible = "qcom,sc8280xp-ufshc", "qcom,ufshc", |
| "jedec,ufs-2.0"; |
| reg = <0 0x01d84000 0 0x3000>; |
| interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; |
| phys = <&ufs_mem_phy>; |
| phy-names = "ufsphy"; |
| lanes-per-direction = <2>; |
| #reset-cells = <1>; |
| resets = <&gcc GCC_UFS_PHY_BCR>; |
| reset-names = "rst"; |
| |
| power-domains = <&gcc UFS_PHY_GDSC>; |
| required-opps = <&rpmhpd_opp_nom>; |
| |
| iommus = <&apps_smmu 0xe0 0x0>; |
| dma-coherent; |
| |
| clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, |
| <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, |
| <&gcc GCC_UFS_PHY_AHB_CLK>, |
| <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, |
| <&gcc GCC_UFS_REF_CLKREF_CLK>, |
| <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, |
| <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, |
| <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; |
| clock-names = "core_clk", |
| "bus_aggr_clk", |
| "iface_clk", |
| "core_clk_unipro", |
| "ref_clk", |
| "tx_lane0_sync_clk", |
| "rx_lane0_sync_clk", |
| "rx_lane1_sync_clk"; |
| freq-table-hz = <75000000 300000000>, |
| <0 0>, |
| <0 0>, |
| <75000000 300000000>, |
| <0 0>, |
| <0 0>, |
| <0 0>, |
| <0 0>; |
| status = "disabled"; |
| }; |
| |
| ufs_mem_phy: phy@1d87000 { |
| compatible = "qcom,sc8280xp-qmp-ufs-phy"; |
| reg = <0 0x01d87000 0 0x1000>; |
| |
| clocks = <&gcc GCC_UFS_CARD_CLKREF_CLK>, |
| <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; |
| clock-names = "ref", "ref_aux"; |
| |
| power-domains = <&gcc UFS_PHY_GDSC>; |
| |
| resets = <&ufs_mem_hc 0>; |
| reset-names = "ufsphy"; |
| |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| ufs_card_hc: ufs@1da4000 { |
| compatible = "qcom,sc8280xp-ufshc", "qcom,ufshc", |
| "jedec,ufs-2.0"; |
| reg = <0 0x01da4000 0 0x3000>; |
| interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; |
| phys = <&ufs_card_phy>; |
| phy-names = "ufsphy"; |
| lanes-per-direction = <2>; |
| #reset-cells = <1>; |
| resets = <&gcc GCC_UFS_CARD_BCR>; |
| reset-names = "rst"; |
| |
| power-domains = <&gcc UFS_CARD_GDSC>; |
| |
| iommus = <&apps_smmu 0x4a0 0x0>; |
| dma-coherent; |
| |
| clocks = <&gcc GCC_UFS_CARD_AXI_CLK>, |
| <&gcc GCC_AGGRE_UFS_CARD_AXI_CLK>, |
| <&gcc GCC_UFS_CARD_AHB_CLK>, |
| <&gcc GCC_UFS_CARD_UNIPRO_CORE_CLK>, |
| <&gcc GCC_UFS_REF_CLKREF_CLK>, |
| <&gcc GCC_UFS_CARD_TX_SYMBOL_0_CLK>, |
| <&gcc GCC_UFS_CARD_RX_SYMBOL_0_CLK>, |
| <&gcc GCC_UFS_CARD_RX_SYMBOL_1_CLK>; |
| clock-names = "core_clk", |
| "bus_aggr_clk", |
| "iface_clk", |
| "core_clk_unipro", |
| "ref_clk", |
| "tx_lane0_sync_clk", |
| "rx_lane0_sync_clk", |
| "rx_lane1_sync_clk"; |
| freq-table-hz = <75000000 300000000>, |
| <0 0>, |
| <0 0>, |
| <75000000 300000000>, |
| <0 0>, |
| <0 0>, |
| <0 0>, |
| <0 0>; |
| status = "disabled"; |
| }; |
| |
| ufs_card_phy: phy@1da7000 { |
| compatible = "qcom,sc8280xp-qmp-ufs-phy"; |
| reg = <0 0x01da7000 0 0x1000>; |
| |
| clocks = <&gcc GCC_UFS_1_CARD_CLKREF_CLK>, |
| <&gcc GCC_UFS_CARD_PHY_AUX_CLK>; |
| clock-names = "ref", "ref_aux"; |
| |
| power-domains = <&gcc UFS_CARD_GDSC>; |
| |
| resets = <&ufs_card_hc 0>; |
| reset-names = "ufsphy"; |
| |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| tcsr_mutex: hwlock@1f40000 { |
| compatible = "qcom,tcsr-mutex"; |
| reg = <0x0 0x01f40000 0x0 0x20000>; |
| #hwlock-cells = <1>; |
| }; |
| |
| tcsr: syscon@1fc0000 { |
| compatible = "qcom,sc8280xp-tcsr", "syscon"; |
| reg = <0x0 0x01fc0000 0x0 0x30000>; |
| }; |
| |
| gpu: gpu@3d00000 { |
| compatible = "qcom,adreno-690.0", "qcom,adreno"; |
| |
| reg = <0 0x03d00000 0 0x40000>, |
| <0 0x03d9e000 0 0x1000>, |
| <0 0x03d61000 0 0x800>; |
| reg-names = "kgsl_3d0_reg_memory", |
| "cx_mem", |
| "cx_dbgc"; |
| interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; |
| iommus = <&gpu_smmu 0 0xc00>, <&gpu_smmu 1 0xc00>; |
| operating-points-v2 = <&gpu_opp_table>; |
| |
| qcom,gmu = <&gmu>; |
| interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "gfx-mem"; |
| #cooling-cells = <2>; |
| |
| status = "disabled"; |
| |
| gpu_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-270000000 { |
| opp-hz = /bits/ 64 <270000000>; |
| opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; |
| opp-peak-kBps = <451000>; |
| }; |
| |
| opp-410000000 { |
| opp-hz = /bits/ 64 <410000000>; |
| opp-level = <RPMH_REGULATOR_LEVEL_SVS>; |
| opp-peak-kBps = <1555000>; |
| }; |
| |
| opp-500000000 { |
| opp-hz = /bits/ 64 <500000000>; |
| opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; |
| opp-peak-kBps = <1555000>; |
| }; |
| |
| opp-547000000 { |
| opp-hz = /bits/ 64 <547000000>; |
| opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; |
| opp-peak-kBps = <1555000>; |
| }; |
| |
| opp-606000000 { |
| opp-hz = /bits/ 64 <606000000>; |
| opp-level = <RPMH_REGULATOR_LEVEL_NOM>; |
| opp-peak-kBps = <2736000>; |
| }; |
| |
| opp-640000000 { |
| opp-hz = /bits/ 64 <640000000>; |
| opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; |
| opp-peak-kBps = <2736000>; |
| }; |
| |
| opp-655000000 { |
| opp-hz = /bits/ 64 <655000000>; |
| opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; |
| opp-peak-kBps = <2736000>; |
| }; |
| |
| opp-690000000 { |
| opp-hz = /bits/ 64 <690000000>; |
| opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; |
| opp-peak-kBps = <2736000>; |
| }; |
| }; |
| }; |
| |
| gmu: gmu@3d6a000 { |
| compatible = "qcom,adreno-gmu-690.0", "qcom,adreno-gmu"; |
| reg = <0 0x03d6a000 0 0x34000>, |
| <0 0x03de0000 0 0x10000>, |
| <0 0x0b290000 0 0x10000>; |
| reg-names = "gmu", "rscc", "gmu_pdc"; |
| interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "hfi", "gmu"; |
| clocks = <&gpucc GPU_CC_CX_GMU_CLK>, |
| <&gpucc GPU_CC_CXO_CLK>, |
| <&gcc GCC_DDRSS_GPU_AXI_CLK>, |
| <&gcc GCC_GPU_MEMNOC_GFX_CLK>, |
| <&gpucc GPU_CC_AHB_CLK>, |
| <&gpucc GPU_CC_HUB_CX_INT_CLK>, |
| <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>; |
| clock-names = "gmu", |
| "cxo", |
| "axi", |
| "memnoc", |
| "ahb", |
| "hub", |
| "smmu_vote"; |
| power-domains = <&gpucc GPU_CC_CX_GDSC>, |
| <&gpucc GPU_CC_GX_GDSC>; |
| power-domain-names = "cx", |
| "gx"; |
| iommus = <&gpu_smmu 5 0xc00>; |
| operating-points-v2 = <&gmu_opp_table>; |
| |
| gmu_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-200000000 { |
| opp-hz = /bits/ 64 <200000000>; |
| opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; |
| }; |
| |
| opp-500000000 { |
| opp-hz = /bits/ 64 <500000000>; |
| opp-level = <RPMH_REGULATOR_LEVEL_SVS>; |
| }; |
| }; |
| }; |
| |
| gpucc: clock-controller@3d90000 { |
| compatible = "qcom,sc8280xp-gpucc"; |
| reg = <0 0x03d90000 0 0x9000>; |
| clocks = <&rpmhcc RPMH_CXO_CLK>, |
| <&gcc GCC_GPU_GPLL0_CLK_SRC>, |
| <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; |
| clock-names = "bi_tcxo", |
| "gcc_gpu_gpll0_clk_src", |
| "gcc_gpu_gpll0_div_clk_src"; |
| |
| power-domains = <&rpmhpd SC8280XP_GFX>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| #power-domain-cells = <1>; |
| }; |
| |
| gpu_smmu: iommu@3da0000 { |
| compatible = "qcom,sc8280xp-smmu-500", "qcom,adreno-smmu", |
| "qcom,smmu-500", "arm,mmu-500"; |
| reg = <0 0x03da0000 0 0x20000>; |
| #iommu-cells = <2>; |
| #global-interrupts = <2>; |
| interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, |
| <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, |
| <&gpucc GPU_CC_AHB_CLK>, |
| <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, |
| <&gpucc GPU_CC_CX_GMU_CLK>, |
| <&gpucc GPU_CC_HUB_CX_INT_CLK>, |
| <&gpucc GPU_CC_HUB_AON_CLK>; |
| clock-names = "gcc_gpu_memnoc_gfx_clk", |
| "gcc_gpu_snoc_dvm_gfx_clk", |
| "gpu_cc_ahb_clk", |
| "gpu_cc_hlos1_vote_gpu_smmu_clk", |
| "gpu_cc_cx_gmu_clk", |
| "gpu_cc_hub_cx_int_clk", |
| "gpu_cc_hub_aon_clk"; |
| |
| power-domains = <&gpucc GPU_CC_CX_GDSC>; |
| dma-coherent; |
| }; |
| |
| usb_0_hsphy: phy@88e5000 { |
| compatible = "qcom,sc8280xp-usb-hs-phy", |
| "qcom,usb-snps-hs-5nm-phy"; |
| reg = <0 0x088e5000 0 0x400>; |
| clocks = <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "ref"; |
| resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; |
| |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| usb_2_hsphy0: phy@88e7000 { |
| compatible = "qcom,sc8280xp-usb-hs-phy", |
| "qcom,usb-snps-hs-5nm-phy"; |
| reg = <0 0x088e7000 0 0x400>; |
| clocks = <&gcc GCC_USB2_HS0_CLKREF_CLK>; |
| clock-names = "ref"; |
| resets = <&gcc GCC_QUSB2PHY_HS0_MP_BCR>; |
| |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| usb_2_hsphy1: phy@88e8000 { |
| compatible = "qcom,sc8280xp-usb-hs-phy", |
| "qcom,usb-snps-hs-5nm-phy"; |
| reg = <0 0x088e8000 0 0x400>; |
| clocks = <&gcc GCC_USB2_HS1_CLKREF_CLK>; |
| clock-names = "ref"; |
| resets = <&gcc GCC_QUSB2PHY_HS1_MP_BCR>; |
| |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| usb_2_hsphy2: phy@88e9000 { |
| compatible = "qcom,sc8280xp-usb-hs-phy", |
| "qcom,usb-snps-hs-5nm-phy"; |
| reg = <0 0x088e9000 0 0x400>; |
| clocks = <&gcc GCC_USB2_HS2_CLKREF_CLK>; |
| clock-names = "ref"; |
| resets = <&gcc GCC_QUSB2PHY_HS2_MP_BCR>; |
| |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| usb_2_hsphy3: phy@88ea000 { |
| compatible = "qcom,sc8280xp-usb-hs-phy", |
| "qcom,usb-snps-hs-5nm-phy"; |
| reg = <0 0x088ea000 0 0x400>; |
| clocks = <&gcc GCC_USB2_HS3_CLKREF_CLK>; |
| clock-names = "ref"; |
| resets = <&gcc GCC_QUSB2PHY_HS3_MP_BCR>; |
| |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| usb_2_qmpphy0: phy@88ef000 { |
| compatible = "qcom,sc8280xp-qmp-usb3-uni-phy"; |
| reg = <0 0x088ef000 0 0x2000>; |
| |
| clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>, |
| <&gcc GCC_USB3_MP0_CLKREF_CLK>, |
| <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>, |
| <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>; |
| clock-names = "aux", "ref", "com_aux", "pipe"; |
| |
| resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>, |
| <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>; |
| reset-names = "phy", "phy_phy"; |
| |
| power-domains = <&gcc USB30_MP_GDSC>; |
| |
| #clock-cells = <0>; |
| clock-output-names = "usb2_phy0_pipe_clk"; |
| |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| usb_2_qmpphy1: phy@88f1000 { |
| compatible = "qcom,sc8280xp-qmp-usb3-uni-phy"; |
| reg = <0 0x088f1000 0 0x2000>; |
| |
| clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>, |
| <&gcc GCC_USB3_MP1_CLKREF_CLK>, |
| <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>, |
| <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>; |
| clock-names = "aux", "ref", "com_aux", "pipe"; |
| |
| resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>, |
| <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>; |
| reset-names = "phy", "phy_phy"; |
| |
| power-domains = <&gcc USB30_MP_GDSC>; |
| |
| #clock-cells = <0>; |
| clock-output-names = "usb2_phy1_pipe_clk"; |
| |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| remoteproc_adsp: remoteproc@3000000 { |
| compatible = "qcom,sc8280xp-adsp-pas"; |
| reg = <0 0x03000000 0 0x100>; |
| |
| interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, |
| <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_adsp_in 7 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "wdog", "fatal", "ready", |
| "handover", "stop-ack", "shutdown-ack"; |
| |
| clocks = <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "xo"; |
| |
| power-domains = <&rpmhpd SC8280XP_LCX>, |
| <&rpmhpd SC8280XP_LMX>; |
| power-domain-names = "lcx", "lmx"; |
| |
| memory-region = <&pil_adsp_mem>; |
| |
| qcom,qmp = <&aoss_qmp>; |
| |
| qcom,smem-states = <&smp2p_adsp_out 0>; |
| qcom,smem-state-names = "stop"; |
| |
| status = "disabled"; |
| |
| remoteproc_adsp_glink: glink-edge { |
| interrupts-extended = <&ipcc IPCC_CLIENT_LPASS |
| IPCC_MPROC_SIGNAL_GLINK_QMP |
| IRQ_TYPE_EDGE_RISING>; |
| mboxes = <&ipcc IPCC_CLIENT_LPASS |
| IPCC_MPROC_SIGNAL_GLINK_QMP>; |
| |
| label = "lpass"; |
| qcom,remote-pid = <2>; |
| |
| gpr { |
| compatible = "qcom,gpr"; |
| qcom,glink-channels = "adsp_apps"; |
| qcom,domain = <GPR_DOMAIN_ID_ADSP>; |
| qcom,intents = <512 20>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| q6apm: service@1 { |
| compatible = "qcom,q6apm"; |
| reg = <GPR_APM_MODULE_IID>; |
| #sound-dai-cells = <0>; |
| qcom,protection-domain = "avs/audio", |
| "msm/adsp/audio_pd"; |
| q6apmdai: dais { |
| compatible = "qcom,q6apm-dais"; |
| iommus = <&apps_smmu 0x0c01 0x0>; |
| }; |
| |
| q6apmbedai: bedais { |
| compatible = "qcom,q6apm-lpass-dais"; |
| #sound-dai-cells = <1>; |
| }; |
| }; |
| |
| q6prm: service@2 { |
| compatible = "qcom,q6prm"; |
| reg = <GPR_PRM_MODULE_IID>; |
| qcom,protection-domain = "avs/audio", |
| "msm/adsp/audio_pd"; |
| q6prmcc: clock-controller { |
| compatible = "qcom,q6prm-lpass-clocks"; |
| #clock-cells = <2>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| rxmacro: rxmacro@3200000 { |
| compatible = "qcom,sc8280xp-lpass-rx-macro"; |
| reg = <0 0x03200000 0 0x1000>; |
| clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| <&vamacro>; |
| clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; |
| assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; |
| assigned-clock-rates = <19200000>, <19200000>; |
| |
| clock-output-names = "mclk"; |
| #clock-cells = <0>; |
| #sound-dai-cells = <1>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&rx_swr_default>; |
| |
| status = "disabled"; |
| }; |
| |
| swr1: soundwire@3210000 { |
| compatible = "qcom,soundwire-v1.6.0"; |
| reg = <0 0x03210000 0 0x2000>; |
| interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&rxmacro>; |
| clock-names = "iface"; |
| resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>; |
| reset-names = "swr_audio_cgcr"; |
| label = "RX"; |
| |
| qcom,din-ports = <0>; |
| qcom,dout-ports = <5>; |
| |
| qcom,ports-sinterval-low = /bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>; |
| qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0B 0x01 0x00>; |
| qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0B 0x00 0x00>; |
| qcom,ports-hstart = /bits/ 8 <0xff 0x03 0x00 0xff 0xff>; |
| qcom,ports-hstop = /bits/ 8 <0xff 0x06 0x0f 0xff 0xff>; |
| qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff>; |
| qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0x01 0xff 0xff>; |
| qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>; |
| qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>; |
| |
| #sound-dai-cells = <1>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| txmacro: txmacro@3220000 { |
| compatible = "qcom,sc8280xp-lpass-tx-macro"; |
| reg = <0 0x03220000 0 0x1000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&tx_swr_default>; |
| clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| <&vamacro>; |
| |
| clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; |
| assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; |
| assigned-clock-rates = <19200000>, <19200000>; |
| clock-output-names = "mclk"; |
| |
| #clock-cells = <0>; |
| #sound-dai-cells = <1>; |
| |
| status = "disabled"; |
| }; |
| |
| wsamacro: codec@3240000 { |
| compatible = "qcom,sc8280xp-lpass-wsa-macro"; |
| reg = <0 0x03240000 0 0x1000>; |
| clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| <&vamacro>; |
| clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; |
| assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; |
| assigned-clock-rates = <19200000>, <19200000>; |
| |
| #clock-cells = <0>; |
| clock-output-names = "mclk"; |
| #sound-dai-cells = <1>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&wsa_swr_default>; |
| |
| status = "disabled"; |
| }; |
| |
| swr0: soundwire@3250000 { |
| reg = <0 0x03250000 0 0x2000>; |
| compatible = "qcom,soundwire-v1.6.0"; |
| interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&wsamacro>; |
| clock-names = "iface"; |
| resets = <&lpass_audiocc LPASS_AUDIO_SWR_WSA_CGCR>; |
| reset-names = "swr_audio_cgcr"; |
| label = "WSA"; |
| |
| qcom,din-ports = <2>; |
| qcom,dout-ports = <6>; |
| |
| qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>; |
| qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>; |
| qcom,ports-offset2 = /bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>; |
| qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; |
| qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; |
| qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; |
| qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01 0xff 0xff>; |
| qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; |
| qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; |
| |
| #sound-dai-cells = <1>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| lpass_audiocc: clock-controller@32a9000 { |
| compatible = "qcom,sc8280xp-lpassaudiocc"; |
| reg = <0 0x032a9000 0 0x1000>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| swr2: soundwire@3330000 { |
| compatible = "qcom,soundwire-v1.6.0"; |
| reg = <0 0x03330000 0 0x2000>; |
| interrupts = <GIC_SPI 959 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "core", "wakeup"; |
| |
| clocks = <&txmacro>; |
| clock-names = "iface"; |
| resets = <&lpasscc LPASS_AUDIO_SWR_TX_CGCR>; |
| reset-names = "swr_audio_cgcr"; |
| label = "TX"; |
| #sound-dai-cells = <1>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| qcom,din-ports = <4>; |
| qcom,dout-ports = <0>; |
| qcom,ports-sinterval-low = /bits/ 8 <0x01 0x01 0x03 0x03>; |
| qcom,ports-offset1 = /bits/ 8 <0x01 0x00 0x02 0x00>; |
| qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00>; |
| qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff>; |
| qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff>; |
| qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff>; |
| qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff>; |
| qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff>; |
| qcom,ports-lane-control = /bits/ 8 <0x00 0x01 0x00 0x01>; |
| |
| status = "disabled"; |
| }; |
| |
| vamacro: codec@3370000 { |
| compatible = "qcom,sc8280xp-lpass-va-macro"; |
| reg = <0 0x03370000 0 0x1000>; |
| clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; |
| clock-names = "mclk", "macro", "dcodec", "npl"; |
| assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; |
| assigned-clock-rates = <19200000>; |
| |
| #clock-cells = <0>; |
| clock-output-names = "fsgen"; |
| #sound-dai-cells = <1>; |
| |
| status = "disabled"; |
| }; |
| |
| lpass_tlmm: pinctrl@33c0000 { |
| compatible = "qcom,sc8280xp-lpass-lpi-pinctrl"; |
| reg = <0 0x33c0000 0x0 0x20000>, |
| <0 0x3550000 0x0 0x10000>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&lpass_tlmm 0 0 19>; |
| |
| clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; |
| clock-names = "core", "audio"; |
| |
| status = "disabled"; |
| |
| tx_swr_default: tx-swr-default-state { |
| clk-pins { |
| pins = "gpio0"; |
| function = "swr_tx_clk"; |
| drive-strength = <2>; |
| slew-rate = <1>; |
| bias-disable; |
| }; |
| |
| data-pins { |
| pins = "gpio1", "gpio2"; |
| function = "swr_tx_data"; |
| drive-strength = <2>; |
| slew-rate = <1>; |
| bias-bus-hold; |
| }; |
| }; |
| |
| rx_swr_default: rx-swr-default-state { |
| clk-pins { |
| pins = "gpio3"; |
| function = "swr_rx_clk"; |
| drive-strength = <2>; |
| slew-rate = <1>; |
| bias-disable; |
| }; |
| |
| data-pins { |
| pins = "gpio4", "gpio5"; |
| function = "swr_rx_data"; |
| drive-strength = <2>; |
| slew-rate = <1>; |
| bias-bus-hold; |
| }; |
| }; |
| |
| dmic01_default: dmic01-default-state { |
| clk-pins { |
| pins = "gpio6"; |
| function = "dmic1_clk"; |
| drive-strength = <8>; |
| output-high; |
| }; |
| |
| data-pins { |
| pins = "gpio7"; |
| function = "dmic1_data"; |
| drive-strength = <8>; |
| input-enable; |
| }; |
| }; |
| |
| dmic01_sleep: dmic01-sleep-state { |
| clk-pins { |
| pins = "gpio6"; |
| function = "dmic1_clk"; |
| drive-strength = <2>; |
| bias-disable; |
| output-low; |
| }; |
| |
| data-pins { |
| pins = "gpio7"; |
| function = "dmic1_data"; |
| drive-strength = <2>; |
| bias-pull-down; |
| input-enable; |
| }; |
| }; |
| |
| dmic02_default: dmic02-default-state { |
| clk-pins { |
| pins = "gpio8"; |
| function = "dmic2_clk"; |
| drive-strength = <8>; |
| output-high; |
| }; |
| |
| data-pins { |
| pins = "gpio9"; |
| function = "dmic2_data"; |
| drive-strength = <8>; |
| input-enable; |
| }; |
| }; |
| |
| dmic02_sleep: dmic02-sleep-state { |
| clk-pins { |
| pins = "gpio8"; |
| function = "dmic2_clk"; |
| drive-strength = <2>; |
| bias-disable; |
| output-low; |
| }; |
| |
| data-pins { |
| pins = "gpio9"; |
| function = "dmic2_data"; |
| drive-strength = <2>; |
| bias-pull-down; |
| input-enable; |
| }; |
| }; |
| |
| wsa_swr_default: wsa-swr-default-state { |
| clk-pins { |
| pins = "gpio10"; |
| function = "wsa_swr_clk"; |
| drive-strength = <2>; |
| slew-rate = <1>; |
| bias-disable; |
| }; |
| |
| data-pins { |
| pins = "gpio11"; |
| function = "wsa_swr_data"; |
| drive-strength = <2>; |
| slew-rate = <1>; |
| bias-bus-hold; |
| }; |
| }; |
| |
| wsa2_swr_default: wsa2-swr-default-state { |
| clk-pins { |
| pins = "gpio15"; |
| function = "wsa2_swr_clk"; |
| drive-strength = <2>; |
| slew-rate = <1>; |
| bias-disable; |
| }; |
| |
| data-pins { |
| pins = "gpio16"; |
| function = "wsa2_swr_data"; |
| drive-strength = <2>; |
| slew-rate = <1>; |
| bias-bus-hold; |
| }; |
| }; |
| }; |
| |
| lpasscc: clock-controller@33e0000 { |
| compatible = "qcom,sc8280xp-lpasscc"; |
| reg = <0 0x033e0000 0 0x12000>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| sdc2: mmc@8804000 { |
| compatible = "qcom,sc8280xp-sdhci", "qcom,sdhci-msm-v5"; |
| reg = <0 0x08804000 0 0x1000>; |
| |
| interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "hc_irq", "pwr_irq"; |
| |
| clocks = <&gcc GCC_SDCC2_AHB_CLK>, |
| <&gcc GCC_SDCC2_APPS_CLK>, |
| <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "iface", "core", "xo"; |
| resets = <&gcc GCC_SDCC2_BCR>; |
| interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>; |
| interconnect-names = "sdhc-ddr","cpu-sdhc"; |
| iommus = <&apps_smmu 0x4e0 0x0>; |
| power-domains = <&rpmhpd SC8280XP_CX>; |
| operating-points-v2 = <&sdc2_opp_table>; |
| bus-width = <4>; |
| dma-coherent; |
| |
| status = "disabled"; |
| |
| sdc2_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-100000000 { |
| opp-hz = /bits/ 64 <100000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <1800000 400000>; |
| opp-avg-kBps = <100000 0>; |
| }; |
| |
| opp-202000000 { |
| opp-hz = /bits/ 64 <202000000>; |
| required-opps = <&rpmhpd_opp_svs_l1>; |
| opp-peak-kBps = <5400000 1600000>; |
| opp-avg-kBps = <200000 0>; |
| }; |
| }; |
| }; |
| |
| usb_0_qmpphy: phy@88eb000 { |
| compatible = "qcom,sc8280xp-qmp-usb43dp-phy"; |
| reg = <0 0x088eb000 0 0x4000>; |
| |
| clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, |
| <&gcc GCC_USB4_EUD_CLKREF_CLK>, |
| <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, |
| <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; |
| clock-names = "aux", "ref", "com_aux", "usb3_pipe"; |
| |
| power-domains = <&gcc USB30_PRIM_GDSC>; |
| |
| resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, |
| <&gcc GCC_USB4_DP_PHY_PRIM_BCR>; |
| reset-names = "phy", "common"; |
| |
| #clock-cells = <1>; |
| #phy-cells = <1>; |
| |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| usb_0_qmpphy_out: endpoint {}; |
| }; |
| |
| port@2 { |
| reg = <2>; |
| |
| usb_0_qmpphy_dp_in: endpoint {}; |
| }; |
| }; |
| }; |
| |
| usb_1_hsphy: phy@8902000 { |
| compatible = "qcom,sc8280xp-usb-hs-phy", |
| "qcom,usb-snps-hs-5nm-phy"; |
| reg = <0 0x08902000 0 0x400>; |
| #phy-cells = <0>; |
| |
| clocks = <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "ref"; |
| |
| resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; |
| |
| status = "disabled"; |
| }; |
| |
| usb_1_qmpphy: phy@8903000 { |
| compatible = "qcom,sc8280xp-qmp-usb43dp-phy"; |
| reg = <0 0x08903000 0 0x4000>; |
| |
| clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, |
| <&gcc GCC_USB4_CLKREF_CLK>, |
| <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, |
| <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; |
| clock-names = "aux", "ref", "com_aux", "usb3_pipe"; |
| |
| power-domains = <&gcc USB30_SEC_GDSC>; |
| |
| resets = <&gcc GCC_USB3_PHY_SEC_BCR>, |
| <&gcc GCC_USB4_1_DP_PHY_PRIM_BCR>; |
| reset-names = "phy", "common"; |
| |
| #clock-cells = <1>; |
| #phy-cells = <1>; |
| |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| usb_1_qmpphy_out: endpoint {}; |
| }; |
| |
| port@2 { |
| reg = <2>; |
| |
| usb_1_qmpphy_dp_in: endpoint {}; |
| }; |
| }; |
| }; |
| |
| mdss1_dp0_phy: phy@8909a00 { |
| compatible = "qcom,sc8280xp-dp-phy"; |
| reg = <0 0x08909a00 0 0x19c>, |
| <0 0x08909200 0 0xec>, |
| <0 0x08909600 0 0xec>, |
| <0 0x08909000 0 0x1c8>; |
| |
| clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>, |
| <&dispcc1 DISP_CC_MDSS_AHB_CLK>; |
| clock-names = "aux", "cfg_ahb"; |
| power-domains = <&rpmhpd SC8280XP_MX>; |
| |
| #clock-cells = <1>; |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| mdss1_dp1_phy: phy@890ca00 { |
| compatible = "qcom,sc8280xp-dp-phy"; |
| reg = <0 0x0890ca00 0 0x19c>, |
| <0 0x0890c200 0 0xec>, |
| <0 0x0890c600 0 0xec>, |
| <0 0x0890c000 0 0x1c8>; |
| |
| clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>, |
| <&dispcc1 DISP_CC_MDSS_AHB_CLK>; |
| clock-names = "aux", "cfg_ahb"; |
| power-domains = <&rpmhpd SC8280XP_MX>; |
| |
| #clock-cells = <1>; |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| pmu@9091000 { |
| compatible = "qcom,sc8280xp-llcc-bwmon", "qcom,sc7280-llcc-bwmon"; |
| reg = <0 0x09091000 0 0x1000>; |
| |
| interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; |
| |
| interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>; |
| |
| operating-points-v2 = <&llcc_bwmon_opp_table>; |
| |
| llcc_bwmon_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-0 { |
| opp-peak-kBps = <762000>; |
| }; |
| opp-1 { |
| opp-peak-kBps = <1720000>; |
| }; |
| opp-2 { |
| opp-peak-kBps = <2086000>; |
| }; |
| opp-3 { |
| opp-peak-kBps = <2597000>; |
| }; |
| opp-4 { |
| opp-peak-kBps = <2929000>; |
| }; |
| opp-5 { |
| opp-peak-kBps = <3879000>; |
| }; |
| opp-6 { |
| opp-peak-kBps = <5161000>; |
| }; |
| opp-7 { |
| opp-peak-kBps = <5931000>; |
| }; |
| opp-8 { |
| opp-peak-kBps = <6515000>; |
| }; |
| opp-9 { |
| opp-peak-kBps = <7980000>; |
| }; |
| opp-10 { |
| opp-peak-kBps = <8136000>; |
| }; |
| opp-11 { |
| opp-peak-kBps = <10437000>; |
| }; |
| opp-12 { |
| opp-peak-kBps = <12191000>; |
| }; |
| }; |
| }; |
| |
| pmu@90b6400 { |
| compatible = "qcom,sc8280xp-cpu-bwmon", "qcom,sdm845-bwmon"; |
| reg = <0 0x090b6400 0 0x600>; |
| |
| interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; |
| |
| interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>; |
| operating-points-v2 = <&cpu_bwmon_opp_table>; |
| |
| cpu_bwmon_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-0 { |
| opp-peak-kBps = <2288000>; |
| }; |
| opp-1 { |
| opp-peak-kBps = <4577000>; |
| }; |
| opp-2 { |
| opp-peak-kBps = <7110000>; |
| }; |
| opp-3 { |
| opp-peak-kBps = <9155000>; |
| }; |
| opp-4 { |
| opp-peak-kBps = <12298000>; |
| }; |
| opp-5 { |
| opp-peak-kBps = <14236000>; |
| }; |
| opp-6 { |
| opp-peak-kBps = <15258001>; |
| }; |
| }; |
| }; |
| |
| system-cache-controller@9200000 { |
| compatible = "qcom,sc8280xp-llcc"; |
| reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>, |
| <0 0x09300000 0 0x58000>, <0 0x09380000 0 0x58000>, |
| <0 0x09400000 0 0x58000>, <0 0x09480000 0 0x58000>, |
| <0 0x09500000 0 0x58000>, <0 0x09580000 0 0x58000>, |
| <0 0x09600000 0 0x58000>; |
| reg-names = "llcc0_base", "llcc1_base", "llcc2_base", |
| "llcc3_base", "llcc4_base", "llcc5_base", |
| "llcc6_base", "llcc7_base", "llcc_broadcast_base"; |
| interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| usb_0: usb@a6f8800 { |
| compatible = "qcom,sc8280xp-dwc3", "qcom,dwc3"; |
| reg = <0 0x0a6f8800 0 0x400>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, |
| <&gcc GCC_USB30_PRIM_MASTER_CLK>, |
| <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, |
| <&gcc GCC_USB30_PRIM_SLEEP_CLK>, |
| <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, |
| <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, |
| <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>, |
| <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>, |
| <&gcc GCC_SYS_NOC_USB_AXI_CLK>; |
| clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi", |
| "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys"; |
| |
| assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, |
| <&gcc GCC_USB30_PRIM_MASTER_CLK>; |
| assigned-clock-rates = <19200000>, <200000000>; |
| |
| interrupts-extended = <&intc GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>, |
| <&pdc 14 IRQ_TYPE_EDGE_BOTH>, |
| <&pdc 15 IRQ_TYPE_EDGE_BOTH>, |
| <&pdc 138 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "pwr_event", |
| "dp_hs_phy_irq", |
| "dm_hs_phy_irq", |
| "ss_phy_irq"; |
| |
| power-domains = <&gcc USB30_PRIM_GDSC>; |
| required-opps = <&rpmhpd_opp_nom>; |
| |
| resets = <&gcc GCC_USB30_PRIM_BCR>; |
| |
| interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; |
| interconnect-names = "usb-ddr", "apps-usb"; |
| |
| wakeup-source; |
| |
| status = "disabled"; |
| |
| usb_0_dwc3: usb@a600000 { |
| compatible = "snps,dwc3"; |
| reg = <0 0x0a600000 0 0xcd00>; |
| interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>; |
| iommus = <&apps_smmu 0x820 0x0>; |
| phys = <&usb_0_hsphy>, <&usb_0_qmpphy QMP_USB43DP_USB3_PHY>; |
| phy-names = "usb2-phy", "usb3-phy"; |
| |
| port { |
| usb_0_role_switch: endpoint { |
| }; |
| }; |
| }; |
| }; |
| |
| usb_1: usb@a8f8800 { |
| compatible = "qcom,sc8280xp-dwc3", "qcom,dwc3"; |
| reg = <0 0x0a8f8800 0 0x400>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, |
| <&gcc GCC_USB30_SEC_MASTER_CLK>, |
| <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, |
| <&gcc GCC_USB30_SEC_SLEEP_CLK>, |
| <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, |
| <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, |
| <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>, |
| <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>, |
| <&gcc GCC_SYS_NOC_USB_AXI_CLK>; |
| clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi", |
| "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys"; |
| |
| assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, |
| <&gcc GCC_USB30_SEC_MASTER_CLK>; |
| assigned-clock-rates = <19200000>, <200000000>; |
| |
| interrupts-extended = <&intc GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>, |
| <&pdc 12 IRQ_TYPE_EDGE_BOTH>, |
| <&pdc 13 IRQ_TYPE_EDGE_BOTH>, |
| <&pdc 136 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "pwr_event", |
| "dp_hs_phy_irq", |
| "dm_hs_phy_irq", |
| "ss_phy_irq"; |
| |
| power-domains = <&gcc USB30_SEC_GDSC>; |
| required-opps = <&rpmhpd_opp_nom>; |
| |
| resets = <&gcc GCC_USB30_SEC_BCR>; |
| |
| interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>; |
| interconnect-names = "usb-ddr", "apps-usb"; |
| |
| wakeup-source; |
| |
| status = "disabled"; |
| |
| usb_1_dwc3: usb@a800000 { |
| compatible = "snps,dwc3"; |
| reg = <0 0x0a800000 0 0xcd00>; |
| interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>; |
| iommus = <&apps_smmu 0x860 0x0>; |
| phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; |
| phy-names = "usb2-phy", "usb3-phy"; |
| |
| port { |
| usb_1_role_switch: endpoint { |
| }; |
| }; |
| }; |
| }; |
| |
| camcc: clock-controller@ad00000 { |
| compatible = "qcom,sc8280xp-camcc"; |
| reg = <0 0x0ad00000 0 0x20000>; |
| clocks = <&gcc GCC_CAMERA_AHB_CLK>, |
| <&rpmhcc RPMH_CXO_CLK>, |
| <&rpmhcc RPMH_CXO_CLK_A>, |
| <&sleep_clk>; |
| power-domains = <&rpmhpd SC8280XP_MMCX>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| #power-domain-cells = <1>; |
| }; |
| |
| mdss0: display-subsystem@ae00000 { |
| compatible = "qcom,sc8280xp-mdss"; |
| reg = <0 0x0ae00000 0 0x1000>; |
| reg-names = "mdss"; |
| |
| clocks = <&gcc GCC_DISP_AHB_CLK>, |
| <&dispcc0 DISP_CC_MDSS_AHB_CLK>, |
| <&dispcc0 DISP_CC_MDSS_MDP_CLK>; |
| clock-names = "iface", |
| "ahb", |
| "core"; |
| interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; |
| interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>, |
| <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "mdp0-mem", "mdp1-mem"; |
| iommus = <&apps_smmu 0x1000 0x402>; |
| power-domains = <&dispcc0 MDSS_GDSC>; |
| resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>; |
| |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| status = "disabled"; |
| |
| mdss0_mdp: display-controller@ae01000 { |
| compatible = "qcom,sc8280xp-dpu"; |
| reg = <0 0x0ae01000 0 0x8f000>, |
| <0 0x0aeb0000 0 0x2008>; |
| reg-names = "mdp", "vbif"; |
| |
| clocks = <&gcc GCC_DISP_HF_AXI_CLK>, |
| <&gcc GCC_DISP_SF_AXI_CLK>, |
| <&dispcc0 DISP_CC_MDSS_AHB_CLK>, |
| <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>, |
| <&dispcc0 DISP_CC_MDSS_MDP_CLK>, |
| <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>; |
| clock-names = "bus", |
| "nrt_bus", |
| "iface", |
| "lut", |
| "core", |
| "vsync"; |
| interrupt-parent = <&mdss0>; |
| interrupts = <0>; |
| power-domains = <&rpmhpd SC8280XP_MMCX>; |
| |
| assigned-clocks = <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>; |
| assigned-clock-rates = <19200000>; |
| operating-points-v2 = <&mdss0_mdp_opp_table>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| mdss0_intf0_out: endpoint { |
| remote-endpoint = <&mdss0_dp0_in>; |
| }; |
| }; |
| |
| port@4 { |
| reg = <4>; |
| mdss0_intf4_out: endpoint { |
| remote-endpoint = <&mdss0_dp1_in>; |
| }; |
| }; |
| |
| port@5 { |
| reg = <5>; |
| mdss0_intf5_out: endpoint { |
| remote-endpoint = <&mdss0_dp3_in>; |
| }; |
| }; |
| |
| port@6 { |
| reg = <6>; |
| mdss0_intf6_out: endpoint { |
| remote-endpoint = <&mdss0_dp2_in>; |
| }; |
| }; |
| }; |
| |
| mdss0_mdp_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-200000000 { |
| opp-hz = /bits/ 64 <200000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| }; |
| |
| opp-300000000 { |
| opp-hz = /bits/ 64 <300000000>; |
| required-opps = <&rpmhpd_opp_svs>; |
| }; |
| |
| opp-375000000 { |
| opp-hz = /bits/ 64 <375000000>; |
| required-opps = <&rpmhpd_opp_svs_l1>; |
| }; |
| |
| opp-500000000 { |
| opp-hz = /bits/ 64 <500000000>; |
| required-opps = <&rpmhpd_opp_nom>; |
| }; |
| opp-600000000 { |
| opp-hz = /bits/ 64 <600000000>; |
| required-opps = <&rpmhpd_opp_turbo_l1>; |
| }; |
| }; |
| }; |
| |
| mdss0_dp0: displayport-controller@ae90000 { |
| compatible = "qcom,sc8280xp-dp"; |
| reg = <0 0xae90000 0 0x200>, |
| <0 0xae90200 0 0x200>, |
| <0 0xae90400 0 0x600>, |
| <0 0xae91000 0 0x400>, |
| <0 0xae91400 0 0x400>; |
| interrupt-parent = <&mdss0>; |
| interrupts = <12>; |
| clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>, |
| <&dispcc0 DISP_CC_MDSS_DPTX0_AUX_CLK>, |
| <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_CLK>, |
| <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, |
| <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>; |
| clock-names = "core_iface", "core_aux", |
| "ctrl_link", |
| "ctrl_link_iface", |
| "stream_pixel"; |
| |
| assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, |
| <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>; |
| assigned-clock-parents = <&usb_0_qmpphy QMP_USB43DP_DP_LINK_CLK>, |
| <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; |
| |
| phys = <&usb_0_qmpphy QMP_USB43DP_DP_PHY>; |
| phy-names = "dp"; |
| |
| #sound-dai-cells = <0>; |
| |
| operating-points-v2 = <&mdss0_dp0_opp_table>; |
| power-domains = <&rpmhpd SC8280XP_MMCX>; |
| |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| mdss0_dp0_in: endpoint { |
| remote-endpoint = <&mdss0_intf0_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| mdss0_dp0_out: endpoint { |
| }; |
| }; |
| }; |
| |
| mdss0_dp0_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-160000000 { |
| opp-hz = /bits/ 64 <160000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| }; |
| |
| opp-270000000 { |
| opp-hz = /bits/ 64 <270000000>; |
| required-opps = <&rpmhpd_opp_svs>; |
| }; |
| |
| opp-540000000 { |
| opp-hz = /bits/ 64 <540000000>; |
| required-opps = <&rpmhpd_opp_svs_l1>; |
| }; |
| |
| opp-810000000 { |
| opp-hz = /bits/ 64 <810000000>; |
| required-opps = <&rpmhpd_opp_nom>; |
| }; |
| }; |
| }; |
| |
| mdss0_dp1: displayport-controller@ae98000 { |
| compatible = "qcom,sc8280xp-dp"; |
| reg = <0 0xae98000 0 0x200>, |
| <0 0xae98200 0 0x200>, |
| <0 0xae98400 0 0x600>, |
| <0 0xae99000 0 0x400>, |
| <0 0xae99400 0 0x400>; |
| interrupt-parent = <&mdss0>; |
| interrupts = <13>; |
| clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>, |
| <&dispcc0 DISP_CC_MDSS_DPTX1_AUX_CLK>, |
| <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_CLK>, |
| <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>, |
| <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>; |
| clock-names = "core_iface", "core_aux", |
| "ctrl_link", |
| "ctrl_link_iface", "stream_pixel"; |
| |
| assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>, |
| <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>; |
| assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, |
| <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; |
| |
| phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; |
| phy-names = "dp"; |
| |
| #sound-dai-cells = <0>; |
| |
| operating-points-v2 = <&mdss0_dp1_opp_table>; |
| power-domains = <&rpmhpd SC8280XP_MMCX>; |
| |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| mdss0_dp1_in: endpoint { |
| remote-endpoint = <&mdss0_intf4_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| mdss0_dp1_out: endpoint { |
| }; |
| }; |
| }; |
| |
| mdss0_dp1_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-160000000 { |
| opp-hz = /bits/ 64 <160000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| }; |
| |
| opp-270000000 { |
| opp-hz = /bits/ 64 <270000000>; |
| required-opps = <&rpmhpd_opp_svs>; |
| }; |
| |
| opp-540000000 { |
| opp-hz = /bits/ 64 <540000000>; |
| required-opps = <&rpmhpd_opp_svs_l1>; |
| }; |
| |
| opp-810000000 { |
| opp-hz = /bits/ 64 <810000000>; |
| required-opps = <&rpmhpd_opp_nom>; |
| }; |
| }; |
| }; |
| |
| mdss0_dp2: displayport-controller@ae9a000 { |
| compatible = "qcom,sc8280xp-dp"; |
| reg = <0 0xae9a000 0 0x200>, |
| <0 0xae9a200 0 0x200>, |
| <0 0xae9a400 0 0x600>, |
| <0 0xae9b000 0 0x400>, |
| <0 0xae9b400 0 0x400>; |
| |
| clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>, |
| <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>, |
| <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK>, |
| <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>, |
| <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>; |
| clock-names = "core_iface", "core_aux", |
| "ctrl_link", |
| "ctrl_link_iface", "stream_pixel"; |
| interrupt-parent = <&mdss0>; |
| interrupts = <14>; |
| phys = <&mdss0_dp2_phy>; |
| phy-names = "dp"; |
| power-domains = <&rpmhpd SC8280XP_MMCX>; |
| |
| assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>, |
| <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>; |
| assigned-clock-parents = <&mdss0_dp2_phy 0>, <&mdss0_dp2_phy 1>; |
| operating-points-v2 = <&mdss0_dp2_opp_table>; |
| |
| #sound-dai-cells = <0>; |
| |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| mdss0_dp2_in: endpoint { |
| remote-endpoint = <&mdss0_intf6_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| }; |
| }; |
| |
| mdss0_dp2_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-160000000 { |
| opp-hz = /bits/ 64 <160000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| }; |
| |
| opp-270000000 { |
| opp-hz = /bits/ 64 <270000000>; |
| required-opps = <&rpmhpd_opp_svs>; |
| }; |
| |
| opp-540000000 { |
| opp-hz = /bits/ 64 <540000000>; |
| required-opps = <&rpmhpd_opp_svs_l1>; |
| }; |
| |
| opp-810000000 { |
| opp-hz = /bits/ 64 <810000000>; |
| required-opps = <&rpmhpd_opp_nom>; |
| }; |
| }; |
| }; |
| |
| mdss0_dp3: displayport-controller@aea0000 { |
| compatible = "qcom,sc8280xp-dp"; |
| reg = <0 0xaea0000 0 0x200>, |
| <0 0xaea0200 0 0x200>, |
| <0 0xaea0400 0 0x600>, |
| <0 0xaea1000 0 0x400>, |
| <0 0xaea1400 0 0x400>; |
| |
| clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>, |
| <&dispcc0 DISP_CC_MDSS_DPTX3_AUX_CLK>, |
| <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_CLK>, |
| <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>, |
| <&dispcc0 DISP_CC_MDSS_DPTX3_PIXEL0_CLK>; |
| clock-names = "core_iface", "core_aux", |
| "ctrl_link", |
| "ctrl_link_iface", "stream_pixel"; |
| interrupt-parent = <&mdss0>; |
| interrupts = <15>; |
| phys = <&mdss0_dp3_phy>; |
| phy-names = "dp"; |
| power-domains = <&rpmhpd SC8280XP_MMCX>; |
| |
| assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>, |
| <&dispcc0 DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>; |
| assigned-clock-parents = <&mdss0_dp3_phy 0>, <&mdss0_dp3_phy 1>; |
| operating-points-v2 = <&mdss0_dp3_opp_table>; |
| |
| #sound-dai-cells = <0>; |
| |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| mdss0_dp3_in: endpoint { |
| remote-endpoint = <&mdss0_intf5_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| }; |
| }; |
| |
| mdss0_dp3_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-160000000 { |
| opp-hz = /bits/ 64 <160000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| }; |
| |
| opp-270000000 { |
| opp-hz = /bits/ 64 <270000000>; |
| required-opps = <&rpmhpd_opp_svs>; |
| }; |
| |
| opp-540000000 { |
| opp-hz = /bits/ 64 <540000000>; |
| required-opps = <&rpmhpd_opp_svs_l1>; |
| }; |
| |
| opp-810000000 { |
| opp-hz = /bits/ 64 <810000000>; |
| required-opps = <&rpmhpd_opp_nom>; |
| }; |
| }; |
| }; |
| }; |
| |
| mdss0_dp2_phy: phy@aec2a00 { |
| compatible = "qcom,sc8280xp-dp-phy"; |
| reg = <0 0x0aec2a00 0 0x19c>, |
| <0 0x0aec2200 0 0xec>, |
| <0 0x0aec2600 0 0xec>, |
| <0 0x0aec2000 0 0x1c8>; |
| |
| clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>, |
| <&dispcc0 DISP_CC_MDSS_AHB_CLK>; |
| clock-names = "aux", "cfg_ahb"; |
| power-domains = <&rpmhpd SC8280XP_MX>; |
| |
| #clock-cells = <1>; |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| mdss0_dp3_phy: phy@aec5a00 { |
| compatible = "qcom,sc8280xp-dp-phy"; |
| reg = <0 0x0aec5a00 0 0x19c>, |
| <0 0x0aec5200 0 0xec>, |
| <0 0x0aec5600 0 0xec>, |
| <0 0x0aec5000 0 0x1c8>; |
| |
| clocks = <&dispcc0 DISP_CC_MDSS_DPTX3_AUX_CLK>, |
| <&dispcc0 DISP_CC_MDSS_AHB_CLK>; |
| clock-names = "aux", "cfg_ahb"; |
| power-domains = <&rpmhpd SC8280XP_MX>; |
| |
| #clock-cells = <1>; |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| dispcc0: clock-controller@af00000 { |
| compatible = "qcom,sc8280xp-dispcc0"; |
| reg = <0 0x0af00000 0 0x20000>; |
| |
| clocks = <&gcc GCC_DISP_AHB_CLK>, |
| <&rpmhcc RPMH_CXO_CLK>, |
| <&sleep_clk>, |
| <&usb_0_qmpphy QMP_USB43DP_DP_LINK_CLK>, |
| <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, |
| <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, |
| <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, |
| <&mdss0_dp2_phy 0>, |
| <&mdss0_dp2_phy 1>, |
| <&mdss0_dp3_phy 0>, |
| <&mdss0_dp3_phy 1>, |
| <0>, |
| <0>, |
| <0>, |
| <0>; |
| power-domains = <&rpmhpd SC8280XP_MMCX>; |
| |
| #clock-cells = <1>; |
| #power-domain-cells = <1>; |
| #reset-cells = <1>; |
| |
| status = "disabled"; |
| }; |
| |
| pdc: interrupt-controller@b220000 { |
| compatible = "qcom,sc8280xp-pdc", "qcom,pdc"; |
| reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>; |
| qcom,pdc-ranges = <0 480 40>, |
| <40 140 14>, |
| <54 263 1>, |
| <55 306 4>, |
| <59 312 3>, |
| <62 374 2>, |
| <64 434 2>, |
| <66 438 3>, |
| <69 86 1>, |
| <70 520 54>, |
| <124 609 28>, |
| <159 638 1>, |
| <160 720 8>, |
| <168 801 1>, |
| <169 728 30>, |
| <199 416 2>, |
| <201 449 1>, |
| <202 89 1>, |
| <203 451 1>, |
| <204 462 1>, |
| <205 264 1>, |
| <206 579 1>, |
| <207 653 1>, |
| <208 656 1>, |
| <209 659 1>, |
| <210 122 1>, |
| <211 699 1>, |
| <212 705 1>, |
| <213 450 1>, |
| <214 643 1>, |
| <216 646 5>, |
| <221 390 5>, |
| <226 700 3>, |
| <229 240 3>, |
| <232 269 1>, |
| <233 377 1>, |
| <234 372 1>, |
| <235 138 1>, |
| <236 857 1>, |
| <237 860 1>, |
| <238 137 1>, |
| <239 668 1>, |
| <240 366 1>, |
| <241 949 1>, |
| <242 815 5>, |
| <247 769 1>, |
| <248 768 1>, |
| <249 663 1>, |
| <250 799 2>, |
| <252 798 1>, |
| <253 765 1>, |
| <254 763 1>, |
| <255 454 1>, |
| <258 139 1>, |
| <259 786 2>, |
| <261 370 2>, |
| <263 158 2>; |
| #interrupt-cells = <2>; |
| interrupt-parent = <&intc>; |
| interrupt-controller; |
| }; |
| |
| tsens0: thermal-sensor@c263000 { |
| compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2"; |
| reg = <0 0x0c263000 0 0x1ff>, /* TM */ |
| <0 0x0c222000 0 0x8>; /* SROT */ |
| #qcom,sensors = <14>; |
| interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>, |
| <&pdc 28 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "uplow", "critical"; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| tsens1: thermal-sensor@c265000 { |
| compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2"; |
| reg = <0 0x0c265000 0 0x1ff>, /* TM */ |
| <0 0x0c223000 0 0x8>; /* SROT */ |
| #qcom,sensors = <16>; |
| interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>, |
| <&pdc 29 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "uplow", "critical"; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| aoss_qmp: power-management@c300000 { |
| compatible = "qcom,sc8280xp-aoss-qmp", "qcom,aoss-qmp"; |
| reg = <0 0x0c300000 0 0x400>; |
| interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>; |
| mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; |
| |
| #clock-cells = <0>; |
| }; |
| |
| sram@c3f0000 { |
| compatible = "qcom,rpmh-stats"; |
| reg = <0 0x0c3f0000 0 0x400>; |
| qcom,qmp = <&aoss_qmp>; |
| }; |
| |
| spmi_bus: spmi@c440000 { |
| compatible = "qcom,spmi-pmic-arb"; |
| reg = <0 0x0c440000 0 0x1100>, |
| <0 0x0c600000 0 0x2000000>, |
| <0 0x0e600000 0 0x100000>, |
| <0 0x0e700000 0 0xa0000>, |
| <0 0x0c40a000 0 0x26000>; |
| reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; |
| interrupt-names = "periph_irq"; |
| interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; |
| qcom,ee = <0>; |
| qcom,channel = <0>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| interrupt-controller; |
| #interrupt-cells = <4>; |
| }; |
| |
| tlmm: pinctrl@f100000 { |
| compatible = "qcom,sc8280xp-tlmm"; |
| reg = <0 0x0f100000 0 0x300000>; |
| interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-ranges = <&tlmm 0 0 230>; |
| wakeup-parent = <&pdc>; |
| }; |
| |
| apps_smmu: iommu@15000000 { |
| compatible = "qcom,sc8280xp-smmu-500", "arm,mmu-500"; |
| reg = <0 0x15000000 0 0x100000>; |
| #iommu-cells = <2>; |
| #global-interrupts = <2>; |
| interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 912 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 911 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 910 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 909 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 908 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 907 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 906 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 905 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 904 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 903 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 902 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 901 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 900 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 899 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 898 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 895 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 894 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 893 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 892 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 891 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 890 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| intc: interrupt-controller@17a00000 { |
| compatible = "arm,gic-v3"; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ |
| <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ |
| interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| #redistributor-regions = <1>; |
| redistributor-stride = <0 0x20000>; |
| |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| msi-controller@17a40000 { |
| compatible = "arm,gic-v3-its"; |
| reg = <0 0x17a40000 0 0x20000>; |
| msi-controller; |
| #msi-cells = <1>; |
| }; |
| }; |
| |
| watchdog@17c10000 { |
| compatible = "qcom,apss-wdt-sc8280xp", "qcom,kpss-wdt"; |
| reg = <0 0x17c10000 0 0x1000>; |
| clocks = <&sleep_clk>; |
| interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>; |
| }; |
| |
| timer@17c20000 { |
| compatible = "arm,armv7-timer-mem"; |
| reg = <0x0 0x17c20000 0x0 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x0 0x20000000>; |
| |
| frame@17c21000 { |
| frame-number = <0>; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x17c21000 0x1000>, |
| <0x17c22000 0x1000>; |
| }; |
| |
| frame@17c23000 { |
| frame-number = <1>; |
| interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x17c23000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@17c25000 { |
| frame-number = <2>; |
| interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x17c25000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@17c27000 { |
| frame-number = <3>; |
| interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x17c26000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@17c29000 { |
| frame-number = <4>; |
| interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x17c29000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@17c2b000 { |
| frame-number = <5>; |
| interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x17c2b000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@17c2d000 { |
| frame-number = <6>; |
| interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x17c2d000 0x1000>; |
| status = "disabled"; |
| }; |
| }; |
| |
| apps_rsc: rsc@18200000 { |
| compatible = "qcom,rpmh-rsc"; |
| reg = <0x0 0x18200000 0x0 0x10000>, |
| <0x0 0x18210000 0x0 0x10000>, |
| <0x0 0x18220000 0x0 0x10000>; |
| reg-names = "drv-0", "drv-1", "drv-2"; |
| interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; |
| qcom,tcs-offset = <0xd00>; |
| qcom,drv-id = <2>; |
| qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>, |
| <WAKE_TCS 3>, <CONTROL_TCS 1>; |
| label = "apps_rsc"; |
| power-domains = <&CLUSTER_PD>; |
| |
| apps_bcm_voter: bcm-voter { |
| compatible = "qcom,bcm-voter"; |
| }; |
| |
| rpmhcc: clock-controller { |
| compatible = "qcom,sc8280xp-rpmh-clk"; |
| #clock-cells = <1>; |
| clock-names = "xo"; |
| clocks = <&xo_board_clk>; |
| }; |
| |
| rpmhpd: power-controller { |
| compatible = "qcom,sc8280xp-rpmhpd"; |
| #power-domain-cells = <1>; |
| operating-points-v2 = <&rpmhpd_opp_table>; |
| |
| rpmhpd_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| rpmhpd_opp_ret: opp1 { |
| opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| |
| rpmhpd_opp_min_svs: opp2 { |
| opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; |
| }; |
| |
| rpmhpd_opp_low_svs: opp3 { |
| opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; |
| }; |
| |
| rpmhpd_opp_svs: opp4 { |
| opp-level = <RPMH_REGULATOR_LEVEL_SVS>; |
| }; |
| |
| rpmhpd_opp_svs_l1: opp5 { |
| opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; |
| }; |
| |
| rpmhpd_opp_nom: opp6 { |
| opp-level = <RPMH_REGULATOR_LEVEL_NOM>; |
| }; |
| |
| rpmhpd_opp_nom_l1: opp7 { |
| opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; |
| }; |
| |
| rpmhpd_opp_nom_l2: opp8 { |
| opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; |
| }; |
| |
| rpmhpd_opp_turbo: opp9 { |
| opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; |
| }; |
| |
| rpmhpd_opp_turbo_l1: opp10 { |
| opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; |
| }; |
| }; |
| }; |
| }; |
| |
| epss_l3: interconnect@18590000 { |
| compatible = "qcom,sc8280xp-epss-l3", "qcom,epss-l3"; |
| reg = <0 0x18590000 0 0x1000>; |
| |
| clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; |
| clock-names = "xo", "alternate"; |
| |
| #interconnect-cells = <1>; |
| }; |
| |
| cpufreq_hw: cpufreq@18591000 { |
| compatible = "qcom,sc8280xp-cpufreq-epss", "qcom,cpufreq-epss"; |
| reg = <0 0x18591000 0 0x1000>, |
| <0 0x18592000 0 0x1000>; |
| reg-names = "freq-domain0", "freq-domain1"; |
| |
| clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; |
| clock-names = "xo", "alternate"; |
| |
| #freq-domain-cells = <1>; |
| #clock-cells = <1>; |
| }; |
| |
| remoteproc_nsp0: remoteproc@1b300000 { |
| compatible = "qcom,sc8280xp-nsp0-pas"; |
| reg = <0 0x1b300000 0 0x100>; |
| |
| interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, |
| <&smp2p_nsp0_in 0 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_nsp0_in 1 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_nsp0_in 2 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_nsp0_in 3 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "wdog", "fatal", "ready", |
| "handover", "stop-ack"; |
| |
| clocks = <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "xo"; |
| |
| power-domains = <&rpmhpd SC8280XP_NSP>; |
| power-domain-names = "nsp"; |
| |
| memory-region = <&pil_nsp0_mem>; |
| |
| qcom,smem-states = <&smp2p_nsp0_out 0>; |
| qcom,smem-state-names = "stop"; |
| |
| interconnects = <&nspa_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>; |
| |
| status = "disabled"; |
| |
| glink-edge { |
| interrupts-extended = <&ipcc IPCC_CLIENT_CDSP |
| IPCC_MPROC_SIGNAL_GLINK_QMP |
| IRQ_TYPE_EDGE_RISING>; |
| mboxes = <&ipcc IPCC_CLIENT_CDSP |
| IPCC_MPROC_SIGNAL_GLINK_QMP>; |
| |
| label = "nsp0"; |
| qcom,remote-pid = <5>; |
| |
| fastrpc { |
| compatible = "qcom,fastrpc"; |
| qcom,glink-channels = "fastrpcglink-apps-dsp"; |
| label = "cdsp"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| compute-cb@1 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <1>; |
| iommus = <&apps_smmu 0x3181 0x0420>; |
| }; |
| |
| compute-cb@2 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <2>; |
| iommus = <&apps_smmu 0x3182 0x0420>; |
| }; |
| |
| compute-cb@3 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <3>; |
| iommus = <&apps_smmu 0x3183 0x0420>; |
| }; |
| |
| compute-cb@4 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <4>; |
| iommus = <&apps_smmu 0x3184 0x0420>; |
| }; |
| |
| compute-cb@5 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <5>; |
| iommus = <&apps_smmu 0x3185 0x0420>; |
| }; |
| |
| compute-cb@6 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <6>; |
| iommus = <&apps_smmu 0x3186 0x0420>; |
| }; |
| |
| compute-cb@7 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <7>; |
| iommus = <&apps_smmu 0x3187 0x0420>; |
| }; |
| |
| compute-cb@8 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <8>; |
| iommus = <&apps_smmu 0x3188 0x0420>; |
| }; |
| |
| compute-cb@9 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <9>; |
| iommus = <&apps_smmu 0x318b 0x0420>; |
| }; |
| |
| compute-cb@10 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <10>; |
| iommus = <&apps_smmu 0x318b 0x0420>; |
| }; |
| |
| compute-cb@11 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <11>; |
| iommus = <&apps_smmu 0x318c 0x0420>; |
| }; |
| |
| compute-cb@12 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <12>; |
| iommus = <&apps_smmu 0x318d 0x0420>; |
| }; |
| |
| compute-cb@13 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <13>; |
| iommus = <&apps_smmu 0x318e 0x0420>; |
| }; |
| |
| compute-cb@14 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <14>; |
| iommus = <&apps_smmu 0x318f 0x0420>; |
| }; |
| }; |
| }; |
| }; |
| |
| remoteproc_nsp1: remoteproc@21300000 { |
| compatible = "qcom,sc8280xp-nsp1-pas"; |
| reg = <0 0x21300000 0 0x100>; |
| |
| interrupts-extended = <&intc GIC_SPI 887 IRQ_TYPE_LEVEL_HIGH>, |
| <&smp2p_nsp1_in 0 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_nsp1_in 1 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_nsp1_in 2 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_nsp1_in 3 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "wdog", "fatal", "ready", |
| "handover", "stop-ack"; |
| |
| clocks = <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "xo"; |
| |
| power-domains = <&rpmhpd SC8280XP_NSP>; |
| power-domain-names = "nsp"; |
| |
| memory-region = <&pil_nsp1_mem>; |
| |
| qcom,smem-states = <&smp2p_nsp1_out 0>; |
| qcom,smem-state-names = "stop"; |
| |
| interconnects = <&nspb_noc MASTER_CDSP_PROC_B 0 &mc_virt SLAVE_EBI1 0>; |
| |
| status = "disabled"; |
| |
| glink-edge { |
| interrupts-extended = <&ipcc IPCC_CLIENT_NSP1 |
| IPCC_MPROC_SIGNAL_GLINK_QMP |
| IRQ_TYPE_EDGE_RISING>; |
| mboxes = <&ipcc IPCC_CLIENT_NSP1 |
| IPCC_MPROC_SIGNAL_GLINK_QMP>; |
| |
| label = "nsp1"; |
| qcom,remote-pid = <12>; |
| }; |
| }; |
| |
| mdss1: display-subsystem@22000000 { |
| compatible = "qcom,sc8280xp-mdss"; |
| reg = <0 0x22000000 0 0x1000>; |
| reg-names = "mdss"; |
| |
| clocks = <&gcc GCC_DISP_AHB_CLK>, |
| <&dispcc1 DISP_CC_MDSS_AHB_CLK>, |
| <&dispcc1 DISP_CC_MDSS_MDP_CLK>; |
| clock-names = "iface", |
| "ahb", |
| "core"; |
| interconnects = <&mmss_noc MASTER_MDP_CORE1_0 0 &mc_virt SLAVE_EBI1 0>, |
| <&mmss_noc MASTER_MDP_CORE1_1 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "mdp0-mem", "mdp1-mem"; |
| interrupts = <GIC_SPI 865 IRQ_TYPE_LEVEL_HIGH>; |
| |
| iommus = <&apps_smmu 0x1800 0x402>; |
| power-domains = <&dispcc1 MDSS_GDSC>; |
| resets = <&dispcc1 DISP_CC_MDSS_CORE_BCR>; |
| |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| status = "disabled"; |
| |
| mdss1_mdp: display-controller@22001000 { |
| compatible = "qcom,sc8280xp-dpu"; |
| reg = <0 0x22001000 0 0x8f000>, |
| <0 0x220b0000 0 0x2008>; |
| reg-names = "mdp", "vbif"; |
| |
| clocks = <&gcc GCC_DISP_HF_AXI_CLK>, |
| <&gcc GCC_DISP_SF_AXI_CLK>, |
| <&dispcc1 DISP_CC_MDSS_AHB_CLK>, |
| <&dispcc1 DISP_CC_MDSS_MDP_LUT_CLK>, |
| <&dispcc1 DISP_CC_MDSS_MDP_CLK>, |
| <&dispcc1 DISP_CC_MDSS_VSYNC_CLK>; |
| clock-names = "bus", |
| "nrt_bus", |
| "iface", |
| "lut", |
| "core", |
| "vsync"; |
| interrupt-parent = <&mdss1>; |
| interrupts = <0>; |
| power-domains = <&rpmhpd SC8280XP_MMCX>; |
| |
| assigned-clocks = <&dispcc1 DISP_CC_MDSS_VSYNC_CLK>; |
| assigned-clock-rates = <19200000>; |
| operating-points-v2 = <&mdss1_mdp_opp_table>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| mdss1_intf0_out: endpoint { |
| remote-endpoint = <&mdss1_dp0_in>; |
| }; |
| }; |
| |
| port@4 { |
| reg = <4>; |
| mdss1_intf4_out: endpoint { |
| remote-endpoint = <&mdss1_dp1_in>; |
| }; |
| }; |
| |
| port@5 { |
| reg = <5>; |
| mdss1_intf5_out: endpoint { |
| remote-endpoint = <&mdss1_dp3_in>; |
| }; |
| }; |
| |
| port@6 { |
| reg = <6>; |
| mdss1_intf6_out: endpoint { |
| remote-endpoint = <&mdss1_dp2_in>; |
| }; |
| }; |
| }; |
| |
| mdss1_mdp_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-200000000 { |
| opp-hz = /bits/ 64 <200000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| }; |
| |
| opp-300000000 { |
| opp-hz = /bits/ 64 <300000000>; |
| required-opps = <&rpmhpd_opp_svs>; |
| }; |
| |
| opp-375000000 { |
| opp-hz = /bits/ 64 <375000000>; |
| required-opps = <&rpmhpd_opp_svs_l1>; |
| }; |
| |
| opp-500000000 { |
| opp-hz = /bits/ 64 <500000000>; |
| required-opps = <&rpmhpd_opp_nom>; |
| }; |
| opp-600000000 { |
| opp-hz = /bits/ 64 <600000000>; |
| required-opps = <&rpmhpd_opp_turbo_l1>; |
| }; |
| }; |
| }; |
| |
| mdss1_dp0: displayport-controller@22090000 { |
| compatible = "qcom,sc8280xp-dp"; |
| reg = <0 0x22090000 0 0x200>, |
| <0 0x22090200 0 0x200>, |
| <0 0x22090400 0 0x600>, |
| <0 0x22091000 0 0x400>, |
| <0 0x22091400 0 0x400>; |
| |
| clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>, |
| <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>, |
| <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK>, |
| <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, |
| <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>; |
| clock-names = "core_iface", "core_aux", |
| "ctrl_link", |
| "ctrl_link_iface", "stream_pixel"; |
| interrupt-parent = <&mdss1>; |
| interrupts = <12>; |
| phys = <&mdss1_dp0_phy>; |
| phy-names = "dp"; |
| power-domains = <&rpmhpd SC8280XP_MMCX>; |
| |
| assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, |
| <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>; |
| assigned-clock-parents = <&mdss1_dp0_phy 0>, <&mdss1_dp0_phy 1>; |
| operating-points-v2 = <&mdss1_dp0_opp_table>; |
| |
| #sound-dai-cells = <0>; |
| |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| mdss1_dp0_in: endpoint { |
| remote-endpoint = <&mdss1_intf0_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| }; |
| }; |
| |
| mdss1_dp0_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-160000000 { |
| opp-hz = /bits/ 64 <160000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| }; |
| |
| opp-270000000 { |
| opp-hz = /bits/ 64 <270000000>; |
| required-opps = <&rpmhpd_opp_svs>; |
| }; |
| |
| opp-540000000 { |
| opp-hz = /bits/ 64 <540000000>; |
| required-opps = <&rpmhpd_opp_svs_l1>; |
| }; |
| |
| opp-810000000 { |
| opp-hz = /bits/ 64 <810000000>; |
| required-opps = <&rpmhpd_opp_nom>; |
| }; |
| }; |
| }; |
| |
| mdss1_dp1: displayport-controller@22098000 { |
| compatible = "qcom,sc8280xp-dp"; |
| reg = <0 0x22098000 0 0x200>, |
| <0 0x22098200 0 0x200>, |
| <0 0x22098400 0 0x600>, |
| <0 0x22099000 0 0x400>, |
| <0 0x22099400 0 0x400>; |
| |
| clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>, |
| <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>, |
| <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK>, |
| <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>, |
| <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>; |
| clock-names = "core_iface", "core_aux", |
| "ctrl_link", |
| "ctrl_link_iface", "stream_pixel"; |
| interrupt-parent = <&mdss1>; |
| interrupts = <13>; |
| phys = <&mdss1_dp1_phy>; |
| phy-names = "dp"; |
| power-domains = <&rpmhpd SC8280XP_MMCX>; |
| |
| assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>, |
| <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>; |
| assigned-clock-parents = <&mdss1_dp1_phy 0>, <&mdss1_dp1_phy 1>; |
| operating-points-v2 = <&mdss1_dp1_opp_table>; |
| |
| #sound-dai-cells = <0>; |
| |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| mdss1_dp1_in: endpoint { |
| remote-endpoint = <&mdss1_intf4_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| }; |
| }; |
| |
| mdss1_dp1_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-160000000 { |
| opp-hz = /bits/ 64 <160000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| }; |
| |
| opp-270000000 { |
| opp-hz = /bits/ 64 <270000000>; |
| required-opps = <&rpmhpd_opp_svs>; |
| }; |
| |
| opp-540000000 { |
| opp-hz = /bits/ 64 <540000000>; |
| required-opps = <&rpmhpd_opp_svs_l1>; |
| }; |
| |
| opp-810000000 { |
| opp-hz = /bits/ 64 <810000000>; |
| required-opps = <&rpmhpd_opp_nom>; |
| }; |
| }; |
| }; |
| |
| mdss1_dp2: displayport-controller@2209a000 { |
| compatible = "qcom,sc8280xp-dp"; |
| reg = <0 0x2209a000 0 0x200>, |
| <0 0x2209a200 0 0x200>, |
| <0 0x2209a400 0 0x600>, |
| <0 0x2209b000 0 0x400>, |
| <0 0x2209b400 0 0x400>; |
| |
| clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>, |
| <&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>, |
| <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK>, |
| <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>, |
| <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>; |
| clock-names = "core_iface", "core_aux", |
| "ctrl_link", |
| "ctrl_link_iface", "stream_pixel"; |
| interrupt-parent = <&mdss1>; |
| interrupts = <14>; |
| phys = <&mdss1_dp2_phy>; |
| phy-names = "dp"; |
| power-domains = <&rpmhpd SC8280XP_MMCX>; |
| |
| assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>, |
| <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>; |
| assigned-clock-parents = <&mdss1_dp2_phy 0>, <&mdss1_dp2_phy 1>; |
| operating-points-v2 = <&mdss1_dp2_opp_table>; |
| |
| #sound-dai-cells = <0>; |
| |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| mdss1_dp2_in: endpoint { |
| remote-endpoint = <&mdss1_intf6_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| }; |
| }; |
| |
| mdss1_dp2_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-160000000 { |
| opp-hz = /bits/ 64 <160000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| }; |
| |
| opp-270000000 { |
| opp-hz = /bits/ 64 <270000000>; |
| required-opps = <&rpmhpd_opp_svs>; |
| }; |
| |
| opp-540000000 { |
| opp-hz = /bits/ 64 <540000000>; |
| required-opps = <&rpmhpd_opp_svs_l1>; |
| }; |
| |
| opp-810000000 { |
| opp-hz = /bits/ 64 <810000000>; |
| required-opps = <&rpmhpd_opp_nom>; |
| }; |
| }; |
| }; |
| |
| mdss1_dp3: displayport-controller@220a0000 { |
| compatible = "qcom,sc8280xp-dp"; |
| reg = <0 0x220a0000 0 0x200>, |
| <0 0x220a0200 0 0x200>, |
| <0 0x220a0400 0 0x600>, |
| <0 0x220a1000 0 0x400>, |
| <0 0x220a1400 0 0x400>; |
| |
| clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>, |
| <&dispcc1 DISP_CC_MDSS_DPTX3_AUX_CLK>, |
| <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_CLK>, |
| <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>, |
| <&dispcc1 DISP_CC_MDSS_DPTX3_PIXEL0_CLK>; |
| clock-names = "core_iface", "core_aux", |
| "ctrl_link", |
| "ctrl_link_iface", "stream_pixel"; |
| interrupt-parent = <&mdss1>; |
| interrupts = <15>; |
| phys = <&mdss1_dp3_phy>; |
| phy-names = "dp"; |
| power-domains = <&rpmhpd SC8280XP_MMCX>; |
| |
| assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>, |
| <&dispcc1 DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>; |
| assigned-clock-parents = <&mdss1_dp3_phy 0>, <&mdss1_dp3_phy 1>; |
| operating-points-v2 = <&mdss1_dp3_opp_table>; |
| |
| #sound-dai-cells = <0>; |
| |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| mdss1_dp3_in: endpoint { |
| remote-endpoint = <&mdss1_intf5_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| }; |
| }; |
| |
| mdss1_dp3_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-160000000 { |
| opp-hz = /bits/ 64 <160000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| }; |
| |
| opp-270000000 { |
| opp-hz = /bits/ 64 <270000000>; |
| required-opps = <&rpmhpd_opp_svs>; |
| }; |
| |
| opp-540000000 { |
| opp-hz = /bits/ 64 <540000000>; |
| required-opps = <&rpmhpd_opp_svs_l1>; |
| }; |
| |
| opp-810000000 { |
| opp-hz = /bits/ 64 <810000000>; |
| required-opps = <&rpmhpd_opp_nom>; |
| }; |
| }; |
| }; |
| }; |
| |
| mdss1_dp2_phy: phy@220c2a00 { |
| compatible = "qcom,sc8280xp-dp-phy"; |
| reg = <0 0x220c2a00 0 0x19c>, |
| <0 0x220c2200 0 0xec>, |
| <0 0x220c2600 0 0xec>, |
| <0 0x220c2000 0 0x1c8>; |
| |
| clocks = <&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>, |
| <&dispcc1 DISP_CC_MDSS_AHB_CLK>; |
| clock-names = "aux", "cfg_ahb"; |
| power-domains = <&rpmhpd SC8280XP_MX>; |
| |
| #clock-cells = <1>; |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| mdss1_dp3_phy: phy@220c5a00 { |
| compatible = "qcom,sc8280xp-dp-phy"; |
| reg = <0 0x220c5a00 0 0x19c>, |
| <0 0x220c5200 0 0xec>, |
| <0 0x220c5600 0 0xec>, |
| <0 0x220c5000 0 0x1c8>; |
| |
| clocks = <&dispcc1 DISP_CC_MDSS_DPTX3_AUX_CLK>, |
| <&dispcc1 DISP_CC_MDSS_AHB_CLK>; |
| clock-names = "aux", "cfg_ahb"; |
| power-domains = <&rpmhpd SC8280XP_MX>; |
| |
| #clock-cells = <1>; |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| dispcc1: clock-controller@22100000 { |
| compatible = "qcom,sc8280xp-dispcc1"; |
| reg = <0 0x22100000 0 0x20000>; |
| |
| clocks = <&gcc GCC_DISP_AHB_CLK>, |
| <&rpmhcc RPMH_CXO_CLK>, |
| <0>, |
| <&mdss1_dp0_phy 0>, |
| <&mdss1_dp0_phy 1>, |
| <&mdss1_dp1_phy 0>, |
| <&mdss1_dp1_phy 1>, |
| <&mdss1_dp2_phy 0>, |
| <&mdss1_dp2_phy 1>, |
| <&mdss1_dp3_phy 0>, |
| <&mdss1_dp3_phy 1>, |
| <0>, |
| <0>, |
| <0>, |
| <0>; |
| power-domains = <&rpmhpd SC8280XP_MMCX>; |
| |
| #clock-cells = <1>; |
| #power-domain-cells = <1>; |
| #reset-cells = <1>; |
| |
| status = "disabled"; |
| }; |
| |
| ethernet1: ethernet@23000000 { |
| compatible = "qcom,sc8280xp-ethqos"; |
| reg = <0x0 0x23000000 0x0 0x10000>, |
| <0x0 0x23016000 0x0 0x100>; |
| reg-names = "stmmaceth", "rgmii"; |
| |
| clocks = <&gcc GCC_EMAC1_AXI_CLK>, |
| <&gcc GCC_EMAC1_SLV_AHB_CLK>, |
| <&gcc GCC_EMAC1_PTP_CLK>, |
| <&gcc GCC_EMAC1_RGMII_CLK>; |
| clock-names = "stmmaceth", |
| "pclk", |
| "ptp_ref", |
| "rgmii"; |
| |
| interrupts = <GIC_SPI 929 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 919 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "macirq", "eth_lpi"; |
| |
| iommus = <&apps_smmu 0x40 0xf>; |
| power-domains = <&gcc EMAC_1_GDSC>; |
| |
| snps,tso; |
| snps,pbl = <32>; |
| rx-fifo-depth = <4096>; |
| tx-fifo-depth = <4096>; |
| |
| status = "disabled"; |
| }; |
| }; |
| |
| sound: sound { |
| }; |
| |
| thermal-zones { |
| cpu0-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens0 1>; |
| |
| trips { |
| cpu-crit { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu1-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens0 2>; |
| |
| trips { |
| cpu-crit { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu2-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens0 3>; |
| |
| trips { |
| cpu-crit { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu3-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens0 4>; |
| |
| trips { |
| cpu-crit { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu4-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens0 5>; |
| |
| trips { |
| cpu-crit { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu5-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens0 6>; |
| |
| trips { |
| cpu-crit { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu6-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens0 7>; |
| |
| trips { |
| cpu-crit { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu7-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens0 8>; |
| |
| trips { |
| cpu-crit { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cluster0-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens0 9>; |
| |
| trips { |
| cpu-crit { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| mem-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens1 15>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| }; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| }; |