| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (C) 2009 Lemote Inc. |
| * Author: Wu Zhangjin, wuzhangjin@gmail.com |
| */ |
| |
| #include <linux/irqchip.h> |
| #include <linux/logic_pio.h> |
| #include <linux/memblock.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <asm/bootinfo.h> |
| #include <asm/traps.h> |
| #include <asm/smp-ops.h> |
| #include <asm/cacheflush.h> |
| #include <asm/fw/fw.h> |
| |
| #include <loongson.h> |
| #include <boot_param.h> |
| |
| #define NODE_ID_OFFSET_ADDR ((void __iomem *)TO_UNCAC(0x1001041c)) |
| |
| u32 node_id_offset; |
| |
| static void __init mips_nmi_setup(void) |
| { |
| void *base; |
| |
| base = (void *)(CAC_BASE + 0x380); |
| memcpy(base, except_vec_nmi, 0x80); |
| flush_icache_range((unsigned long)base, (unsigned long)base + 0x80); |
| } |
| |
| void ls7a_early_config(void) |
| { |
| node_id_offset = ((readl(NODE_ID_OFFSET_ADDR) >> 8) & 0x1f) + 36; |
| } |
| |
| void rs780e_early_config(void) |
| { |
| node_id_offset = 37; |
| } |
| |
| void virtual_early_config(void) |
| { |
| node_id_offset = 44; |
| } |
| |
| void __init szmem(unsigned int node) |
| { |
| u32 i, mem_type; |
| phys_addr_t node_id, mem_start, mem_size; |
| |
| /* Otherwise come from DTB */ |
| if (loongson_sysconf.fw_interface != LOONGSON_LEFI) |
| return; |
| |
| /* Parse memory information and activate */ |
| for (i = 0; i < loongson_memmap->nr_map; i++) { |
| node_id = loongson_memmap->map[i].node_id; |
| if (node_id != node) |
| continue; |
| |
| mem_type = loongson_memmap->map[i].mem_type; |
| mem_size = loongson_memmap->map[i].mem_size; |
| |
| /* Memory size comes in MB if MEM_SIZE_IS_IN_BYTES not set */ |
| if (mem_size & MEM_SIZE_IS_IN_BYTES) |
| mem_size &= ~MEM_SIZE_IS_IN_BYTES; |
| else |
| mem_size = mem_size << 20; |
| |
| mem_start = (node_id << 44) | loongson_memmap->map[i].mem_start; |
| |
| switch (mem_type) { |
| case SYSTEM_RAM_LOW: |
| case SYSTEM_RAM_HIGH: |
| case UMA_VIDEO_RAM: |
| pr_info("Node %d, mem_type:%d\t[%pa], %pa bytes usable\n", |
| (u32)node_id, mem_type, &mem_start, &mem_size); |
| memblock_add_node(mem_start, mem_size, node, |
| MEMBLOCK_NONE); |
| break; |
| case SYSTEM_RAM_RESERVED: |
| case VIDEO_ROM: |
| case ADAPTER_ROM: |
| case ACPI_TABLE: |
| case SMBIOS_TABLE: |
| pr_info("Node %d, mem_type:%d\t[%pa], %pa bytes reserved\n", |
| (u32)node_id, mem_type, &mem_start, &mem_size); |
| memblock_reserve(mem_start, mem_size); |
| break; |
| /* We should not reserve VUMA_VIDEO_RAM as it overlaps with MMIO */ |
| case VUMA_VIDEO_RAM: |
| default: |
| pr_info("Node %d, mem_type:%d\t[%pa], %pa bytes unhandled\n", |
| (u32)node_id, mem_type, &mem_start, &mem_size); |
| break; |
| } |
| } |
| |
| /* Reserve vgabios if it comes from firmware */ |
| if (loongson_sysconf.vgabios_addr) |
| memblock_reserve(virt_to_phys((void *)loongson_sysconf.vgabios_addr), |
| SZ_256K); |
| /* set nid for reserved memory */ |
| memblock_set_node((u64)node << 44, (u64)(node + 1) << 44, |
| &memblock.reserved, node); |
| } |
| |
| #ifndef CONFIG_NUMA |
| static void __init prom_init_memory(void) |
| { |
| szmem(0); |
| } |
| #endif |
| |
| void __init prom_init(void) |
| { |
| fw_init_cmdline(); |
| |
| if (fw_arg2 == 0 || (fdt_magic(fw_arg2) == FDT_MAGIC)) { |
| loongson_sysconf.fw_interface = LOONGSON_DTB; |
| prom_dtb_init_env(); |
| } else { |
| loongson_sysconf.fw_interface = LOONGSON_LEFI; |
| prom_lefi_init_env(); |
| } |
| |
| /* init base address of io space */ |
| set_io_port_base(PCI_IOBASE); |
| |
| if (loongson_sysconf.early_config) |
| loongson_sysconf.early_config(); |
| |
| #ifdef CONFIG_NUMA |
| prom_init_numa_memory(); |
| #else |
| prom_init_memory(); |
| #endif |
| |
| /* Hardcode to CPU UART 0 */ |
| if ((read_c0_prid() & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64R) |
| setup_8250_early_printk_port(TO_UNCAC(LOONGSON_REG_BASE), 0, 1024); |
| else |
| setup_8250_early_printk_port(TO_UNCAC(LOONGSON_REG_BASE + 0x1e0), 0, 1024); |
| |
| register_smp_ops(&loongson3_smp_ops); |
| board_nmi_handler_setup = mips_nmi_setup; |
| } |
| |
| static int __init add_legacy_isa_io(struct fwnode_handle *fwnode, resource_size_t hw_start, |
| resource_size_t size) |
| { |
| int ret = 0; |
| struct logic_pio_hwaddr *range; |
| unsigned long vaddr; |
| |
| range = kzalloc(sizeof(*range), GFP_ATOMIC); |
| if (!range) |
| return -ENOMEM; |
| |
| range->fwnode = fwnode; |
| range->size = size = round_up(size, PAGE_SIZE); |
| range->hw_start = hw_start; |
| range->flags = LOGIC_PIO_CPU_MMIO; |
| |
| ret = logic_pio_register_range(range); |
| if (ret) { |
| kfree(range); |
| return ret; |
| } |
| |
| /* Legacy ISA must placed at the start of PCI_IOBASE */ |
| if (range->io_start != 0) { |
| logic_pio_unregister_range(range); |
| kfree(range); |
| return -EINVAL; |
| } |
| |
| vaddr = PCI_IOBASE + range->io_start; |
| |
| ioremap_page_range(vaddr, vaddr + size, hw_start, pgprot_device(PAGE_KERNEL)); |
| |
| return 0; |
| } |
| |
| static __init void reserve_pio_range(void) |
| { |
| struct device_node *np; |
| |
| for_each_node_by_name(np, "isa") { |
| struct of_range range; |
| struct of_range_parser parser; |
| |
| pr_info("ISA Bridge: %pOF\n", np); |
| |
| if (of_range_parser_init(&parser, np)) { |
| pr_info("Failed to parse resources.\n"); |
| of_node_put(np); |
| break; |
| } |
| |
| for_each_of_range(&parser, &range) { |
| switch (range.flags & IORESOURCE_TYPE_BITS) { |
| case IORESOURCE_IO: |
| pr_info(" IO 0x%016llx..0x%016llx -> 0x%016llx\n", |
| range.cpu_addr, |
| range.cpu_addr + range.size - 1, |
| range.bus_addr); |
| if (add_legacy_isa_io(&np->fwnode, range.cpu_addr, range.size)) |
| pr_warn("Failed to reserve legacy IO in Logic PIO\n"); |
| break; |
| case IORESOURCE_MEM: |
| pr_info(" MEM 0x%016llx..0x%016llx -> 0x%016llx\n", |
| range.cpu_addr, |
| range.cpu_addr + range.size - 1, |
| range.bus_addr); |
| break; |
| } |
| } |
| } |
| } |
| |
| void __init arch_init_irq(void) |
| { |
| reserve_pio_range(); |
| irqchip_init(); |
| } |